I want to find the value occurs most in an 8 integer array. Here is the code that I have. It does compile, but has not been tested.
Code:
int POLL (int *RANGE_ARRAY) {
int d = 0;
int e = 0;
int f = 0;
int g = 0;
int h = 0;
int j = 0;
intk;
[Code] .....
Does this look right or is there a better way of doing this?
My problem is to count the characters in a file and define how many times each one occurs.Characters who are not found must not be included in the table; The output must be a table - like that -
”| character | ASCII- DEC | ASCI – HEX | how many times it occurs |”
This my function:
Code:
int f2(FILE *p1)
{
FILE *g3;
int char_count[256]={0};
char ch;
int n=0;
if(!(g3=fopen("D:zz.txt", "w"))){
[Code] ....
It must look like this:
| D | 68 | 44 | 2 |
| 2 | 50 | 32 | 1 | and so on...
I was doing a side project from my textbook about finding the mode, which is the number that occurs most often in a sequence of numbers. I racked my brain on this for an embarrassing amount of time and finally came up with this, which I think works but for some reason I still feel like I'm not done.
#include "stdafx.h"
#include <iostream>
using namespace std;
void mode(int *, int);
void main() {
const int NUMBERS = 15;
int list[NUMBERS] = {99,73,56,14,28,42,93,64,51,26,56,16,38,81,98};
mode(list,NUMBERS);
[Code] ....
Console Output:
Final Mode 56
Press any key to continue . . .
There it is, I would have commented more but I couldnt think of the right words to explain everything.
I am trying to assign the integer value to unsigned char array. But it is not storing the integer values. It prints the ascii values. Here the code snippet
Code: uchar uc[100];
for(i=0;i<100;i++)
{
uc[i] = i;
}
The values which are stored in uc[] is ascii values.I need the integer values to be stored in uc[]. I tried to do it with sprintf. but the output is not as expected. if I print the uc[i] it should diplay the value as 0,1,2....99.
This program to find the multiplication table, need explanation this step : printf("%d * %d =%d ", n, i, n*i);
#include <stdio.h>
int main() {
int n, i;
printf("Enter an integer to find multiplication table: ");
scanf("%d",&n);
for(i=1;i<=10;++i) {
printf("%d * %d =%d ", n, i, n*i);
} return 0;
The question is: Write a program that reads 3 integer numbers, then finds and prints the: Mean - Maximum & Second Minimum.
#include <iostream>
using namespace std;
int main () {
double a, b, c;
cout<< "Please enter three values"<<endl;
[Code] .....
As an assignment for school , I've to write a program to find the sum prime factors of a user input integer.
E.g. 20 = 2 x 2 x 5 , Sum = 2 + 2 + 5 = 9
E.g. 10 = 2 x 5 , Sum = 2 + 5 = 7
My method for finding the result is as follows :
- Divide the number by increasing values if int i , starting from i=2.
- Once I get a value of i that can divide the number without giving me a remainder , I add this value of i to int sum and divide the number by i.
- I will repeat this process until the user input value is equal to 1.
My code is as shown:
#include<stdio.h>
int primecheck(int n); // Function to check if i is prime
int primesum(int n); // Function to sum the values of i that are prime
int main(void) {
int n;
int sum;
printf("Enter a number (> 1): "); //Prompting and scanning user input ,n
scanf("%d",&n);
sum = primesum(n);
[Code] .....
But for some reason I keep getting an incorrect result, it's as if it is missing out the last factor for each case.
Eg. 20 = 2 x 2 x 5 , the result I get is 4 , which is 2+2
Eg. 40 = 2 x 2 x 2 x 5 , the result I get is 6 , which is 2+2+2;
I've looked through my code numerous times.
I have program that is supposed to read in a story from an input file and separate the words and output the lines on which the word occurs. It needs to read in another input file that has a list of words (1 per line) to ignore. i.e. skip them when running through the story. This is what I have so far, I've changed multiple things trying to get it running....
#include<iostream>
#include<fstream>
#include<map>
#include<set>
#include<vector>
#include<string>
#include"split.h"
[Code] .....
Write a program using user-defined function which accepts an integer array and its size as arguments and assign the elements into a two dimensional array of integers in the following format: If the array is 1,2,3,4,5,6, the resultant 2D array is
1 2 3 4 5 6
1 2 3 4 5 0
1 2 3 4 0 0
1 2 3 0 0 0
1 2 0 0 0 0
1 0 0 0 0 0
I am having problem in writing the code for the problem "To assign the elements of 1-D integer array into 2-D array of integers such as if the array is 1,2,3,4,5,6 The resultant 2-D array should be like :
1 0 0 0 0 0
1 2 0 0 0 0
1 2 3 0 0 0
1 2 3 4 0 0
1 2 3 4 5 0
1 2 3 4 5 6
"
Is there anyway we can make an integer array to an integer...
View 4 Replies View RelatedI want to sort an array like Myarray[3][4] based on the second column while other correspondent rows exchange consequently.
My array is as follows:
3 8 7 2
9 12 0 4
12 2 14 1
I want to sort it based on the second column using “std::qsort" or "std::sort” or other quick method that would lead to the following :
12 2 14 1
3 8 7 2
9 12 0 4
I have a problem concerning transforming int array into bmp image. I wanted to add a post in this topic: [URL] .... , but unfortunately it is closed. Actually I have a question concerning the code written by Duoas. I have a function which takes values from the file and I want to convert it into bmp with the use of Duoas code. I do it like that(it's Duoas code + my load and main function) Is it something wrong with how I do it or it's rather sth wrong with the file.
It compiles without errors but when I run it: core dumped.
According to gdb debugger problem is here: double hue = (intarray[ row - 1 ][ col ] - min_value) * granularity; programs stops, segmentation fault ...
#ifndef INTARRAY2BMP_HPP
#define INTARRAY2BMP_HPP
#include <fstream>
#include <iostream>
#include <string>
[Code] ....
Iam new to c++ and i want to write a program to generate an integer array. I keep getting the error at line 25: invalid types 'int[int]' for array .
int main() {
int rows;
int cols;
cin>>rows>>cols;
int test[rows][cols];
[Code] .....
here i have an assignment, creating a longInt class and using it to calculate large numbers, i dont have a clue how to manipulate a whole array as a single ineteger.
View 7 Replies View RelatedFor Example, it the entered string is: 0324152397 I want it to get stored in an array like-[0] [3] ...[7]. Secondly the string entered may be of any length that is defined only at run time. So, I also need to calculate string length. How could I do that.
View 2 Replies View Relatedint main () {
string integer1;
string integer2;
cout <<" enter your first number: " << endl;
cin >> integer1;
cout << endl;
cout << integer1 << " is your first number" << endl;
}
Now how do I turn the string integer into an array?
The problem is how to return an array of integer from a function?
I'm writing a C program code to return an array of integers ( grades of students ) to the main function!
Write a C program that sorts an unsorted array of 5 integer numbers in ascending order by swapping numbers repeatedly. Specifically, first prompt the user to input 5 numbers and store the numbers in an array. Then, if the numbers in the array are not in ascending order, ask the user to provide the indices of two numbers in the array that the user wants to swap. If the user does not enter valid indices (i.e., outside 0 to4), then re-prompt the user to enter new indices. Continue prompting the user to provide indices of numbers to swap until the array becomes sorted in ascending order. Finally, when the array becomes sorted, the program should print "The array is now sorted in ascending order".
Implementation Requirements
Use the #define directive to define the size of the array.
Implement a function called "checkArrayOrder" to check whether an array is in ascending order or not. The prototype of the function is
"intcheckArrayOrder(int arr[], int size);". The function should return
1 if the array passed to the function is in ascending order0 if the array passed to the function is not in ascending order
Define the function prototype in your program.
Implement a function called "swap", whose prototype is "int swap(int arr[], int size, int i, int j);" which swaps the numbers in positions "i" and "j" of the array passed to the function and returns
1 if the indices"i" and "j" are within bounds (i.e., between 0 and 4) and the swap operation is performed correctly.
0 if the indices"i" and "j" are outside bounds so that the swap operation cannot be performed.
Define the function prototype in your program.
Use the function "checkArrayOrder" whenever your program needs to check whether an array is in ascending order or not; and the function "swap" to swap the numbers the user specifies (Note that, you should check whether the user provided indices are valid inside the function "swap" and not inside "main").
here is my code so far
Code:
#define ARRAY_SIZE 5
void main()
{
int i, array[ARRAY_SIZE];
printf("Enter %d numbers
", ARRAY_SIZE);
for(i=0; i<ARRAY_SIZE; ++i)
scanf("%d", &array[i]);
[Code] .....
I'm just not sure how to proceed. I'm not really sure how to progress the checkArrayOrder function to the swap function (in the if statement).
Code:
#include <stdio.h>
void define (int integer, int IntArr[0], int *IntP);
int main(void)
{int integer = 0, IntArr[1] = {0}, IntP = 0;
define(integer, IntArr, &IntP);
[Code]...
Why does the integer with array change after passing trough the function and the normal integer doesn't? (I know why the normal one doesn't, but I dont get the array one)
I'm just learning and C. Here is a code snippit from a program that will compile. It's function is to validate credit card numbers. I have an error I can't find though. the last print statement shows the conversion in reverse string (as integers). Here is the code:
int main (void)
{
char cn[17];
char *cardtype;
int n0,n1,n2,n3,n4,n5,n6,n7,n8,n9,n10,n11,n12,n13,n14, n15;
int s1,s2,s3,s4,s5,s6,s7,s8;
int oddsum;
int sum;
int total;
int validate;
}
[code]....
i have tried like that int arr[1000000] to initialize but it crashed my programm.but if i do int arr[100000] it works fine..why is that and what is the maximum range of integer array initialization??
View 5 Replies View RelatedThis program is supposed to take integer score inputs from the keyboard into an array and use a sentinel of -999 to end the process.It should call a show() function which passes the array and displays the name and number of the integer for the output.
# include <iostream>
using namespace std;
int main() {
int score(double array1[], int numbers);
[code].....
I am getting an error in the for loop r<number which states "Error identifier "numbers" is undefined" and on my array1 "Error identifier "array1" us undefined" also in my for loop.
I'm writing a function that stores a number into an array. If the number is greater that the lowest number in the array then it replaces it. The array size is 10. When the number is stored in the array. The lowest number must then be remove.
View 3 Replies View Related// prompts the user for a non-negative numbers (>= 0)
// reads in the a number and checks
// keeps re-prompting user if the input is invalid (negative)
[Code].....
How do I go about Populating the elements in the array created, I keep getting a compiler error on this vArr[i] = tmp_stream.str.at(i);
I have an integer that the user enters. I need each digit of the integer to be set as an element of an array. the integer could also be entered as an array, but I need the user not to have to enter each element and press ENTER.
View 5 Replies View Related
