I got above error in my program. My program is socket program. I am using ubuntu 11.10.
#include <netdb.h>
#include <netinet/in.h>
#include <string.h>
#include <cstdlib>
#include <iostream>
#include <stdio.h>
#define PORT 4547
/*int parseARGS(char **args, char *line) {
[Code] ....
The issue arises with case 3 where it tells produces an error when I attempt to compile and says "lvalue required for left operand of assignment error". How to fix this so that I can properly run the program.
View 5 Replies View RelatedI get the following error:
pointers_array.c: In function ‘readlines’:
pointers_array.c:42:37: error: lvalue required as left operand of assignment
I know what the error is saying but what it is giving it with this code:
/* readlines: read input lines */
int readlines(char *lineptr[], int maxlines) {
int len, nlines;
char *p, line[MAXLEN];
nlines = 0;
[Code] ....
I am getting this error when compiling my program with quincy:
Error: I value required as left operand of assignment
The program is meant to calculate how much parking costs based on the amount of hours in a park and what type of vehicle it is. the error is coming from my function definitions which i have just started to add in.
Code:
float calcCarCost (char vehicletype, int time, float car)
{
if ((time > MINTIME) && (time <= 3))
calcCarCost =( CAR * time );
}
The error is on line 72 which is:
calcCarCost =( Car * time);
I should probably point out CAR is already defined as a constant with a numerical value given and time is previously asked to be input in when the program runs.
I actually am wanting to practice on a 2 dimension char array. so, I am using the below program and getting the error - Lvalue Required For Function Main
#include <stdio.h>
#include <conio.h>
#include <string.h>
char varStringArray[1][5];
int main(void) {
clrscr();
varStringArray[0] = 'a';
printf("%c", varStringArray[0]);
return 0;
}
I am having problems compiling this program. line 29 causes the error "left operand must be l-value".
// chap5proj.cpp : Defines the entry point for the console application.
//
# include <stdafx.h>
# include <iostream>
using namespace std;
int main() {
double mph, time, disPerHour, milesTrav;
[code]....
While executing this code i was getting a error Invalid lvalue in assignment. Can any one tell how to correct this.
dataItem* d=(dataItam*)malloc(10*sizeof(dataItem));
dataItem* temp;
temp=(d+6);
(d+6)=(d+8);//error line
(d+8)=temp;//error line
#include<conio.h>
#include<alloc.h>
#include<string.h>
struct node
[Code]....
You enter decimal number into the program and what base you want. The integer part of the decimal is being handled fine, but the decimal is not.
For example, I enter 15.6847 and base 10, which means I'm going from base 10 to base 10. It spits out 68469999999999 for the decimal part. (Do not worry about the first block of numbers. The second block seperated from the first by a space is where the decimal will appear in order.)
#include <iostream>
#include <string>
#include <math.h>
using namespace std;
int baseConverter(int, int, int *, int *);
[Code] ....
I'm trying to create a program that takes an integer input and displays each digit on a new line from right to left.
An example of this would be:
Enter an integer: 657
Digit (1): 7
Digit (2): 5
Digit (3): 6
So far I have this:
#include <stdio.h>
#include <math.h>
int main() {
int i, input, output;
printf("Enter an integer: ");
scanf("%d", &input);
if(input == 0)
printf("Digit (1): 0");
[Code] ....
It works perfectly fine, but I just learned that I am not allowed to use the #include <math.h> so I have to take out floor, log, and pow.
I'm pretty sure I have to do some sort of while or for loop to get the results, but how to do it.
I created a basic socket server, which listensing for incoming udp data. When I run the netcat program, I get a response:
Code:
$ nc -luv 1732
Connection from 10.50.11.12 port 1732 [udp/*] accepted
(?@??8?? ??.?n?5
(?@??8?? ??.?n?5|?>)
(?@??8?? ??.?n?5|?>)
^C |?>)
But with my c program it doesn't give the response. It should say something like "here is the message: " and then give a message.
Code:
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <string.h>
[Code] .....
I have client-server program that written with c++. Both client and server program are working on my computer.Also, I test it on many computer.There is no problem with it.But, When I try to run that program on the my windows server 2003. I get error which on the below.
[URL] ....
I researched it and someone said that it is related 32-64 bit system . My windows server is 32 bit. And I am compiling as 32 bit. But I still get error , can not get any answer with it.
I am trying to send yahoo mail using socket program.
Using the commands like ehlo, starttls, auth login, data,.,quit.
but starttls is error. yahoo close itself. one more thing i use this same method for gmail is working.
The problem is we must enable the ssl authentication. Like System.net mail in .net package smtp.enablessl=true. how i enable ssl authentication in starttls in c++ program
Trying to understand the lvalue and rvalue references, and come up with some strange codes, which compile and run, but is confusing to understand.
Define this class Thing:
class Thing {
public:
Thing(int k = 0): i(k) {};
~Thing() { std::cout << "destroying Thing (i=" << i << ")" << std::endl; }
int getValue() const { return i; };
Thing &getMe() { return *this; };
private:
int i;
};
and a non-member function:
Thing construct_Thing10() {
Thing t(10);
return t;
}
Then these two lines in main():
Thing &thg=construct_Thing10().getMe();
std::cout << "member=" << thg.getValue() << std::endl;
The output is:
destroying Thing (i=10)
member=10
My understanding is that the rhs of line 1 construct only a temporary object. getMe() then return the reference of this temp object and bind it to thg (as a lvalue reference). After line one, the temp object is really destroyed (hence the first output line). At this point thg is really binding to a destroyed, invalid object. But somehow the 2nd line still prints the correct value of 10 is because the memory storage is not yet corrupted (still holding the previous value). Is this correct?
#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;
int main() {
double temp, result;
char type;
[Code] .....
i want to modify value of whole array by passing it to a function and make each value of array multiplied by 3 ,return the value to main and print it using pointer.
error : invalid Lvalue is the error
Code:
#include<stdio.h>
main()
{
int i,arr[10];
for (i=0;i<=9;i++)
{
printf("Enter value of arr[%d] : ",i);
scanf("%d",&arr[i]);
[Code] ....
been working on this code til my eyes bled, can not get second operand to work, if i enter 1 2 3 + - it will only return 5 from the addition operand.
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <math.h>
[Code].....
I get Error this error. Did I miss something or is that some kind of bug?
Code:
error C2679: binary '<<' : no operator found which takes a right-hand operand of type 'const std::string' (or there is no acceptable conversion)301
Code:
2IntelliSense: no operator "<<" matches these operands
operand types are: std::ostream << const std::string307
Code:
#include <iostream>
#include <fstream>
using namespace std;
const string Alphabet1 = "abcdefgijklmnopqrstuvwxyz";
[Code] .....
while (getline(inStream, line))
{
while (inStream >> Student.getId() >> Student.FNAME >> Student.MINIT >> Student.LNAME >> Student.GENDER >> Student.UNITS >> Student.getGpa())
{
while (Student.getId() != id)
{
outStream << line << endl;
}
}
}
This is what I have right now. It shouldn't be a problem, but for some reason I am getting an error trying to >> Student.getGpa()
Error1error C2679: binary '>>' : no operator found which takes a right-hand operand of type 'double' (or there is no acceptable conversion)c:location1301Project 5
I will post more code if needed, but... I just don't know. I have a TON of code so I would rather not if I don't have to.
Code:
void search(){void output(void);
char title[20],;
char *p;
clrscr();
[Code] ......
Info:Program that stores information about reports .the above function searches the report according to its title. list is the name of the structure that stores the records.
Why i'm using strstr:
for eg. there is a report titled 'report on tigers'
I want the report information to be output if someone searches for 'tiger'
Output:displays all the entries i have made till now
file is attached.
Why is using namespace needed in linux but not in turbo c++?
View 1 Replies View RelatedIm using the remquo function in the cmath library as follows:
int quotient;
double a = remquo (10.3, 4.5, "ient);
This gives the correct remainder (a = 1.3) and quotient (quotient = 2).
Infact about 50% of the answers are right when I play around, however, trying something like:
int quotient;
double a = remquo (2.25, 1.5, "ient);
yields an incorrect quotient of 2 and remainder of 0.
I do think this has something to do with float arithmetic. I recall tinkering with the float number 0.500 and that the CPU actually saves it as 0.50000000000000231. However if my suspicion of float arithmetic as the suspect is correct, I do not understand why a tenth decimal would make such a drastic difference as changing the quotient result.
Write a program in C that will allow a user to enter an amount of money, then display the least number of coins and the value of each coin required to make up that amount. The twist to this program is the introduction of a new coin - the jonnie (value = $1.26). Therefore, the coins available for your calculations are: Twonies, Loonies, Jonnies, Quarters, Dimes, Nickels and Pennies. You can assume the amount of money user enters will be less than $100.00.
User enters $4.53. Your output should be:
The least number of coins required to make up $4.53 is 4. The coins needed are:
1 Toonie $2.00
2 Jonnies $2.52
1 Penny $0.01
$4.53
I'm wondering if i'm close. I'm stuck on what to do for the output. This is what i have so far.
Code:
//Start
#include <stdio.h>
int main() {
//Get user input for amount of money
//Input
int i;
//Store input from user
[Code] .....
When i try to compile this code it gives me a error during run-time saying "*program name* has stopped working"
Code:
#include <iostream>
#include <memory>
using std::cout;
using std::endl;
using std::unique_ptr;
[Code] .....
Why is this happening? Also why do you need the asterisk on smart pointers to assign them a value? Is it just because, or is there a reason.
I have to write a code in which the addition of prime number gives the number user input..
for example if user enters 10 then
7+3 = 10
2+3+5 = 10
I encounter this from a library:
( *(reg8 *)(pinPC) |= CY_PINS_PC_DATAOUT)
From my understand the cast (reg8 *) applies to the result of the bitwise OR. But what is the left most asterisk doing?Is it just dereferencing the casted pointer?