i am doing an embedded project on avr microcontroller ATmega8515.actually my project is smart card based electricity billing using UART interfacing..so in this module HEX to ASCII conversion is not possible for me...
how to convert from hex to ascii.
Data handling for a UAV project I am trying. My background is in Microcontrollers but I have never had exposure to "sound" programming practice...
I have got 2 microcontrollers to drive a UAV craft I've made. One "firmware" micro collects all the sensor data and then passes it to the other "application" micro for control processing. Once decisions have been made this is sent back to the "firmware" micro so that actions are taken.
So in essence I am sharing a raw data chunk periodically between the 2 processors that has outputs and feedback data. For the moment this is captured as one big buffer array on either micro after receiving. For easier structure I thought of bouncing this buffer that contains all sensor information and control variables between the 2 processors (visualize a ping pong game with all the possible variables from both micros - bandwidth between the micros is not a limitation) There are quite a few modules that want to access information from this buffer and write control actions back to it.
I was thinking of constructing a struct on both micros to access this "raw data" from the buffer and set it up with variable names so that it is easier for functions to read info and write controls back.
But this would mean that the data is accessible to every function, and there is the fear that some functions will write to the input data or write to control variables that they should not have access to. I also need to reduce memory copies and the like due to limited memory on each micro.
I want to convert Hex:390041 to ascii "90A",
39: 9
00: 0 -->Null
41: A
i am getting only "9" in the bytearray,i know 0 is terminating the array
unsigned int bytes[3];
int j=0,counter=0;
char c[2];
[Code]....
How can I convert bytes to ASCII?, I read wikipedia about UTF-8 and I understood a little bit about add or split bytes to change the value.
Now I have those bytes
0xC7 0xE6 0xC2 0x91 0x93 0x7B 0xCE 0x01
And I found a program (DCode) that convert to 64 bits little-endian, supposedly those bytes in ASCII is this.
lun, 08 julio 2013 04:28:17 UTC <---
I am making a text encrypter and I have to convert text into ASCII codes. I know how to convert a single character into ASCII -
#include <iostream>
using namespace std;
int main() {
cout<<"Text to ASCII converter"<<endl<<"Enter text to convert into ASCII - ";
char text; //defining input type, which is single character
[Code] ....
Try it here - URL.....Is there any way to run a similar program, which converts a string with spaces into ASCII code?
Converting ascii value entered by user.
How to convert it to float basic of c programming techniques only ....
Using C . I have been tasked (for a University assignment) to create a program that will enable a user to upload an image and convert that image into ASCII text using SDL on a Linux system. I've managed to open a window, display an image (non-selected) and convert it into grayscale using
case SDLK_g:
for (int y = 0; y < image->h; y++) {
for (int x = 0; x < image->w; x++) {
Uint32 pixel = pixels[y * image->w + x];
Uint8 r = pixel >> 16 & 0xFF;
Uint8 g = pixel >> 8 & 0xFF;
Uint8 b = pixel & 0xFF;
Uint8 v = (0.212671*r)+(0.715160*g)+(0.072169*B)/>;
pixel = (0xFF << 24) | (v << 16) | (v << 8) | v;
pixels[y * image->w + x] = pixel;
I am absolutely clueless as to how I can get the user to upload an image to the program and then begin the image -> ASCII conversion. I've found seem to be written in C++ or C# to make the conversion I should be using the GetPixelColour command?
The code is supposed to convert characters from an array into their respective ascii integers, and append a 0 if the number is less than 3 digits long. It then supposed to put it all together into one string.
Code:
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
int main(void){
char file[] = "This is a test";
char *ptr = file;
int length = strlen(file);
int i, numbers[length];
[Code] .....
How to convert int into string ? I had done conversion string to int.
My code :
/*Convert string into int using stringstream */
#include <iostream>
#include <string>
#include "console.h"
#include <sstream>
using namespace std;
[Code] .....
If I drop this regular dll project and create a new MFC extension dll project, it will involve too much work. I wonder if there is relatively easier way to convert an existing regular dll project to a MFC extension dll project? BTW, how can I tell a MFC extension dll project from a regular dll project?
View 1 Replies View RelatedI need to create a conversion program to convert kilograms to pounds. The user will enter a number for weight and a char for unit of measurement K= kilo or P=pound and the program should display the other corresponding weight.
View 2 Replies View RelatedI have a project which does a specific thing, like an open file dialog.
I would like to open it in a different project on a click of a button.
Also, It has a different namespace.
I'm guessing that it would involve a "using" statement to add the namespace And I will have to add reference to an *.exe or *.dll -> I'll have to look up how to make a *.dll, I know where the *.exe file is.
I have searched for a different things on Google, but I don't think that I am looking for the correct phrase (which is always frustrating...)
I have 10 or so .sql scripts (the number is likely to rise) which are required to be kept with a C# application.
For the most part the embedded resources seem to work fine , however I require a way in which to guarantee the ordering in which the files are run.
What I do currently:
Retrieve the details of the embedded resources using : Assembly.GetManifestResourceNames()
(and a bit of linq to filter based upon my requirements) which I pass to a list, I then later on use the list to grab the physical resource when its needed.
The files are named such as:
1_ScriptDescription.sql
2_ScriptDescription.sql
3_ScriptDescription.sql
10_ScriptDescription.sql <--- Here's my problem! This will come after 1_ScriptDescription.sql
Ideally I need a way in which to order the list or some kind of ordering when I pull from
Assembly.GetManifestResourceNames()
But I'm not really sure of a practical way to do this, I did consider manipulating the string .....
What I want to do is abstract and model a device (more specifically in this case, an IMU) in an embedded system.
Now, there are a couple of gotchas:
- It is basically a framework, which means that it should work with any device, any platform and any bus.
- It is an embedded system, so power consumption and memory consumption must be reduced. It is not a PC.
- It cannot be too complex, because I fear that will just make people scrap it and rewrite it from scratch :P
- It should aim for as little code as possible to write the whole model, of course. Adding 100 lines of code for each register would be a bummer.
That said, I must also model the current system, which means that the current platform, the current bus (which is I2C) and the specific IMU model (I have a datasheet).
So the model I am thinking of currently is this:
First, I have a platform. It will know what bus a device is connected on and contains the buses (or specifically, the instances of the buses). It consists of a specific class for each platform and a base. Here are the two I have now:
Code:
namespace Sensors
{
template<typename Platform_t> class GPS;
}
namespace Platforms
{
class RaspberryPi: public PlatformBase
[Code]....
Currently I am making the assumption that all platforms will have an I2c bus and UART bus, but I'm not sure about that. We have only one platform ATM, though, so for now this holds. I'm guessing I might have to move it to the specific platforms later and get rid of PlatformBase.GetI2CBus is a problematic one related to registers, but I'll get back to that.
UART is simple to model since it's just a block read and write, so:
Code:
namespace Buses
{
class UART
{
public:
UART(const std::string& UARTPath): m_Open(false), m_PathToUART(UARTPath) {}
[Code]....
I'm probably going to handle all errors through exceptions. So if I can't open the UART bus, I'll throw an exception.
The I2C bus is a problem. I have a model which deals with it on a register-based level, but ideally I'd like to be able to model and use the devices on the I2C bus on a flag-based level (ie, I have names for each individual flag in the registers which I can read or write to directly instead of writing a hexadecimal value directly to each register).
Here is code:
Code:
namespace Buses {
template<unsigned int Id>
class I2CDevice {
public:
I2CDevice(I2C& Bus): m_Bus(Bus) {}
template<typename T>
[Code]....
So I2CDevice does some checks to see that the data to write to a register is either 8 or 16 bits. It does not check that the size to write matches the register's size, but another class does not.
The idea is also that it checks which device is currently active on the bus, and if it's not the current I2CDevice, then it simply selects that before attempting to read or write (the Open call).
This is not meant for multi-threaded environments. Yet, anyway.
The Impl2::Read/Write just dispatches the call so it calls the correct function for writing and reading the correct size, depending on the size of the data.
This is all well and good, but I2C works with registers, so of course I want a class to model a register which I can read and write to directly. It must tie into the bus class since the bus class is the one that abstracts reads and writes on the bus.
The register class looks like:
Code:
template<unsigned int Bits, unsigned int RegisterId, typename Bus_t>
class Register {
public:
typedef typename Impl::RegisterBase<Bits>::Storage_t Storage_t;
static_assert(!std::is_same<Bus_t, Buses::UART>::value, "Cannot read and write registers on the UART bus.");
static_assert(Bits == 8 || Bits == 16 || Bits == 32 || Bits == 64, "Number of bits must be 8, 16, 32 or 64.");
auto Write(Storage_t Data) -> void
[Code]....
I think this explains itself, except for the Regs struct, which is an experiment by me to enable myself to access registers via Regs.Config, etc.
What is missing is the ability to access and read/write the individual bits inside the registers. I am thinking a two-way access, where you can write to individual bits, but must call .Write() to commit the write to the register for efficiency.
I haven't actually written this. I don't know a good way ATM. I don't want to add a lot of variables and a write function because that would use 1 byte for every bit which is unacceptable.
I don't want to add a lot of code to make it work, either. A good get/set class would be nice, but I can't see that working. The register must store all state and any subsequent classes must not store any state or overhead will increase.
Finally, yes, I know a lot is incomplete and untested. It probably won't even compile. But that is for later. First is finishing the model.
It would be nice if things such as the platform and buses could be made static because there will only be one instance at any time, and that would save overhead if I don't have to store objects or references to them, but I haven't figured out how to achieve this.
I'ma firmware writing, and usually use only C language (not my decision, unfortunately!).In many application we've only a text display (2 rows 16 columns ascii char, or 4x20 or something else). But the question can be used also for semi graphics panel and so on.
I'm looking for an example / library / sourcecode to handling all the pages in the project. When the program start you've a 1st page (wth info abt release, hallo screen and so on), then with a arrows buttons you can navigate throught many pages. Some of these can be called by SW (or HW) events. (Button, alarm, end of job ...) In abt 20 year of experience3 I?ve seen many type of different code.
I am trying to write a C code with embedded MySQL with server and client options. I am trying to important a csv data file for MySQL server and client.
I saw on internet like: LOAD DATA LOCAL INFILE 'data.csv' INTO TABLE test FIELDS TERMINATED BY',' LINES TERMINTED BY' ';
But I think that line is for SQL workspace. How to write in C format?
Code:
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include "/usr/include/mysql/mysql.h"
MYSQL *mysql;
MYSQL_RES *results;
MYSQL_ROW record;
static char *server_options[] = { "data.csv", "--defaults-file=my.cnf" };
int num_elements = sizeof(server_options)/ sizeof(char *);
[Code] ......
My earlier attempt to get an answer didn't work, so i want to make my question more straight forward.
Is it possible to create a C++ DLL with Web Browser like CDHtmlDialog embedded in it?
I have the following complete code in c++
Code:
void GetMapData () {
MapPair NewMap;
string TempString;
BOOL SkipReadLine = FALSE;
//------
char buffer[MAX_PATH];
std::fstream File;
[code].....
The problem is that I do not want to have an external MapData.txt, rather I access it through a embedded text resource, which in this case I have no knowledge on doing so.
I have the following snippet which demonstrates to my knowledge on how to access a text resource; however, I do not know hot to modify the code above to implant this, but to still have the same functionality as the original code above.
Code:
HRSRC hRes = FindResource(GetModuleHandle(NULL), MAKEINTRESOURCE(IDR_TEXT1), _T("TEXT"));
DWORD dwSize = SizeofResource(GetModuleHandle(NULL), hRes);
HGLOBAL hGlob = LoadResource(GetModuleHandle(NULL), hRes);
const BYTE* pData = reinterpret_cast<const BYTE*>(::LockResource(hGlob));
note that I am compiling with a MBCS.
The following code is an example of how task are created with micro cos III in c. I am trying to figure how to create similliar code in C++. My problem is how do I instantiate objects and how to use member functions to represent task. Within the create task routine the address of function is passed as argument. How do I do this in C++? Will I need more than one class? New to embedded C++.
/*!
* @brief LED Flasher Task
*/
void
led5_task (void * p_arg)
{
OS_ERR err;
(void)p_arg; // NOTE: Silence compiler warning about unused param.
[Code]...
This project is for an embedded micro controller. In the project i wrote a class that generically services uarts. then i declare 6 objects of that class and hand them configurations for each specific uart.
internally all the objects have a send buffer of data that is still to be sent that gets populated by the object member function.
how can i make an array of function pointers that can point to the same member but of six different objects.
for example (not a working one)
class uart {
private:
struct myData {
unsigned char data[20]
int head
int tail
int count;
[Code] ....
I have an SDI app created with VC2012. Main view is a CFormView and it's the parent to four embedded dialogs. All four dialogs have title bars. On three of them, the title bars looks as I'd expect. Normal size, text left justified. On the fourth, the title bar is noticeably thicker and the text is centered. All styles are the same as far as I can tell. The main difference is the one that's acting up has a browser control on it, the others just standard controls. It looks normal on Windows 7.
View 8 Replies View RelatedIs there any standard USB protocol which i can follow to send data to my embedded board(and vice versa). I have no clue on USB programming using c,is there any example code i could follow,
View 4 Replies View RelatedHow do I print this without generating errors?
Code:
printf(" ||====================================================================||
");
printf(" ||//$///////////////////////////////$||
");
printf(" ||(100)==================| RESERVE BANK OF INDIA|================(100)||
");
printf(" ||$// ~ '------========--------' $//||
[code].....
I have some ascii characters in a char variable.ex - char buf[100]="ab*(z&";
So each of the char in that char array will have some hex value.ex- *'s hex value is '2a'.
And I have a long long int variable in which there is a 64 bit hex value.
ex- long long int k=0x0000888888888888;
Now i want to subtract the char buff's hex value in k. How to accomplish it.
That is 0x0000888888888888
- 0x000061622a287a26
= 0x000027265e600e62 (final result in a buffer or a long variable is okay)
Later i want to reverse the result as 26e006e56272.It should be stored in a variable such that i should be able to access each byte from it(ex- '72'(last 2 hex digits))
Code:
template<class T>
class Convert {
T data;
public:
Convert(const T& tData = T()) : data(tData)
[Code] ....
Why do we use operator? Is float and double function names below?
Code:
Convert<int>::operator<float> float();
Convert<int>::operator<double> double();
I know how to find find ASCII value of given character, but I am not getting how to find ASCII value of given string. For example I want to find ASCII value of string "HELLO",so how to do that.
View 13 Replies View Related