C++ :: Error Stating Variable Is Uninitialized?
Jan 8, 2015
#include <iostream>
#include <string>
struct WeatherStats {
double total_rainfall;
int high_temp;
int low_temp;
int avg_temp;
[Code] ....
When I run this program I am able to input data for the three months but after inputting everything I am prompted with a run time error that states: Run time check failure#3: The variable 'temp' is being used without being initialized. I've underlined the statement that the compiler says is causing this error, yet there is no variable 'temp' in that statement.
Computer are very specific right? So in the problem statement total_yearly_temp = total_yearly_temp + temp.avg_temp; there is a variable called total_yearly_temp and one called temp.avg_temp, but there are none called temp. It can't be complaining about the WeatherStats variable I defined in the first line of the function called temp because I did the exact same thing in the previous function and there are no errors concerning that.
View 3 Replies
ADVERTISEMENT
Mar 27, 2015
In Visual Studios I keep getting this error. cpp(36): error C4700: uninitialized local variable 'Eligible' used
Code:
#include <iostream>
#include <string>
#include <iomanip>
#include <fstream>
#include <cmath>
using namespace std;
void Getinput(int& Loantype, double& Income, double& Totaldebt, double& Loanamount);
[Code] ....
View 4 Replies
View Related
Sep 7, 2014
I keep getting the "Uninitialized Local Variable" error. But for my code it's says it's the variable 'pay' in my Manager Function. This is the only error that is popping up.
I've tried setting pay to 0 but when I do, I get a bunch of external errors. I've also tried assigning pay to WeeklySalary like this:
double pay = WeeklySalary;
//Calculating pay for a company
#include <iostream>
#include <iomanip>
using namespace std;
//Function prototypes
double managerFunction();
double hourlyWorkerFunction();
double commissionWorkerFunction();
[Code] .....
View 10 Replies
View Related
Jul 13, 2012
I had a flawed function like this:
Code:
fn(){
char c;
if (runFirstTime){
#ifdef VC
c='';
#else
c='/';
#endif
}
... // c is used in the rest of the function to construct some pathnames
}
The problem is that the value of c is not defined the 2nd time the function is called (and subsequently). It somehow worked fine under CygWin compiled with gcc. So I didn't spot the flaw until it ran incorrectly under Windows complied with VC++ 2010. Then I found the error and changed the code to something like
Code:
fn(){
#ifdef VC
const char c='';
#else
const char c='/';
#endif
...
}
So now it works correctly under Windows. Then I re-compiled the new code with gcc and to my surprise gcc produced exactly the same binary! How can this be? Does the gcc compiler see my flaw and fix it for me somehow?
View 14 Replies
View Related
Aug 7, 2013
I have a structure
Code: struct time{
char hours;
char minutes;
char seconds;
char dummy;
};
I have kept dummy as the data to be aligned.I will update hours, minutes, and seconds , but will not use dummy in any case.
If I don't initialize 'dummy' does it make any errors ?
Do I need to initialize hours, minutes, seconds as well before I use the structure ?
If so is there any particular reason ?
View 6 Replies
View Related
Aug 7, 2013
Let me say I have a structure
Code:
struct time{
char hours;
char minutes;
char seconds;
char dummy;
};
I have kept dummy as the data to be aligned.I will update hours, minutes, and seconds , but will not use dummy in any case. If I don't initialize 'dummy' does it make any errors ? Do I need to initialize hours, minutes, seconds as well before I use the structure ? If so is there any particular reason ?
View 7 Replies
View Related
Nov 24, 2014
I am getting this message from Valgrind, As far as I can see what it points to is initialized. The memory it is referring to is freed in unload and I was not getting this error until after I added the check function. Valgrind was happy. Here is the code and the error message from Valgrind. I am trying to create a spell checker for an assignment for a online class I am taking. I just want to get this table working correctly before I add it to the rest of the program. The code seems to run fine but I have come to see that dos not mean much in C.
#include "hashTable.h"
#include <stdbool.h>
table_node hash_table[TABLE_LENGTH];
bool loaded = true;
//assigning letters a-z to table nodes for buckets
void key_hash_t( )
[Code] ....
Valgrind error:
arortell@gentoo ~/Development/Projects/C_Projects/Data_Structures/HashTable $ valgrind --leak-check=full --track-origins=yes ./hashTable
==11360== Memcheck, a memory error detector
==11360== Copyright (C) 2002-2013, and GNU GPL'd, by Julian Seward et al.
==11360== Using Valgrind-3.9.0 and LibVEX; rerun with -h for copyright info
==11360== Command: ./hashTable
[Code] ....
View 10 Replies
View Related
Jan 10, 2013
I have airport class which should navigate planes, in its list to runways, with method move, theres a method prepare which changes the direction of flight to all planes, always before move is called, move just increments decrement x and y of plane in its list. But after calling two times in row airport->move(), I get screwed and I really dont know wheres the problem. Have I badly initiazed something? Iterator gets invalidated.
Valgrind Stacktrace
Conditional jump or move depends on uninitialised value(s)
==26207== at 0x409601: plane::move() (in /home/xnovak11/Downloads/airport/main)
==26207== by 0x401FBD: airport::move() (in /home/xnovak11/Downloads/airport/main)
==26207== by 0x405FE1: io::start(std::istream&, std:stream&, std:stream&) (in /home/xnovak11/Downloads/airport/main)
This is how I add planes into list in airport
Code:
list<plane*> planes;
list<plane*>::const_iterator planeIterator;
list<plane*>::iterator planeIteratorMoj;
bool airport::addPlane(const plane& p) {
[Code] .....
This is the method where it fails. When I call it once, no problem, after second call I get instead of normal number in cout<<after move<< s1 i get like 8795456 ....
Code:
void airport::move() {
for(planeIteratorMoj = planes.begin(); planeIteratorMoj!= planes.end(); planeIteratorMoj++) {
plane * p1 = (*planeIteratorMoj);
int s,w;
p1->getPosition(s,w);
[Code] .....
View 3 Replies
View Related
Aug 2, 2014
I discovered valgrind and started using it for my c code. But I get following error message at almost every malloc position, :
==19505== 40 errors in context 10 of 12: ==19505== Use of uninitialised value of size 8 ==19505== at 0x10000416E: my_method (main.c:662) ==19505== by 0x10000159E: main (main.c:182) ==19505== Uninitialised value was created by a heap allocation ==19505== at 0x47F1: malloc (vg_replace_malloc.c:302) ==19505== by 0x100001C21: my_method (main.c:333) ==19505== by 0x10000159E: main (main.c:182)
and I really don't understand what it means. I already googled it but I didn't find out what is my mistake.SO here i just put one example:
Code:
int main(int argc, char** argv) {
//i declare my variables at this position
Uint *used, *forbidden_jumps, *forbidden_jumpsV,
*forbidden_jump;
/*now i want to allocate one of them, this is my line 333 from the error message*/
//a_num is set during the execution of the program,
ALLOC(used, Uint, a_num);
}
[code].....
Is there any support page for the output of valgrind? I found it on the homepage.
View 8 Replies
View Related
Mar 17, 2014
I finished my project and it does work, but every time I hit enter to end the program I get an error that says my variable array is corrupted.
here is my code:
#include <iostream>
#include <ctime>
using namespace std;
int main() {
system ("color C");
[Code] ....
How could I stop this end error from occurring?
View 6 Replies
View Related
Jan 30, 2014
I have one problem with my code it's working until end of this program and program show this error: Run-Time check failure #2 - Stack around the variable 'Obsd" was corrupted.
here is a code, :
#include <iostream>
#include <conio.h>
using namespace std;
struct SData {
int SDSamples;
float SDSampleCount;
[code]....
View 1 Replies
View Related
Jan 27, 2014
I'm working through this neural network tutorial, unfortunately I get stuck trying to compile on line 28, saying "error: 'neuronNum' not declared in this scope." I seem to always get stuck on these kinds of errors, yet I don't understand because I though that the variable was declared and initialized within the for loop.
#include <iostream>
#include <vector>
using namespace std;
[Code]....
View 5 Replies
View Related
Jan 27, 2015
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
namespace Furniture {
class Program {
static void Main(string[] args)
[Code] ....
I tried changing the type of variable to char but i still get the same result. i also tried using a switch statement which was my first choice but i had the same issue.
View 2 Replies
View Related
Mar 20, 2014
My program works before i declare a new variable in class. Right after i declared a new int variable called prevans in my guess class, my program crashes when it runs.
Here's my code: Code: #include <iostream>
#include <time.h>
#include <cstring>
#include <cstdlib>
#include <vector>
[Code].....
View 14 Replies
View Related
Sep 17, 2014
Why I am getting this error
error: variable or field createBinaryFile declared void
void createBinaryFile(std::fstream&, std::ifstream&);
View 2 Replies
View Related
Jun 18, 2012
If I DEFINE a global variable in two source files which belong to the same project, then there is a linker error "multiply defined symbols". But if I DEFINE a global variable in two source files which belong to the different projects, then it compiles fine. Why?
View 8 Replies
View Related
Feb 28, 2013
when i compile my code i get this error : "error : variable-sized object 'largeArray2' may not be initialized"
Code:
float give_coefficients_routh_table_and_fill_two_first_lines(int denominator_degree)
{
float largeArray2[20][20] = {0};
int l = 0;
int c = 0;
int e = denominator_degree ;
for ( e = denominator_degree; e>=0; e--)
[Code] .....
View 9 Replies
View Related
Apr 13, 2014
i always get error case bypasses initialization of a local variable
here's my coding
my header files
Code: #include <stdio.h>
#include <conio.h>
#include <iostream.h>
#include <fstream.h>
[Code].....
i'm using borland c++ v5.02
View 3 Replies
View Related
Apr 3, 2013
I am working on a physics engine, following the cyclone physics engine source code but a I am having trouble with an error that is occurring in my overloaded operator== function. It is saying that the information is unaccessible.
ForceRegistry.cpp
#include "ForceRegistry.h"
#include <algorithm>
void ForceRegistry::add(physicsEntity* body, ForceGenerator *fg) {
ForceRegistration registration;
[Code] ....
View 2 Replies
View Related
Oct 10, 2014
On running the following codes I'm getting these errors. I'm using Code Blocks 13.12
void view(string); //error: variable or field 'view' declared void & error: 'string' was not declared in this scope
void customer()
{
char ch;
[Code]....
View 4 Replies
View Related
Nov 22, 2013
i have highlighted the errors in block letters.
#include<fstream.h>
#include<conio.h>
#include<string.h>
#include<stdio.h>
#include<stdlib.h>
void login();
struct date {
int dd,mm,yy;
[code].....
View 1 Replies
View Related
Sep 30, 2014
Im building a banking system. in my create_account it asks for account address and phone number as well as other questions. When I go to my Show account info (balance inquiry) I notice its not getting the right address as well as phone number. its showing "garbage".
Code:
/********************************************************************
* Vincent Dotts 09/29/2014 ch11.cpp *
* This program serves as a customer banking system *
*****************************HISTORY*********************************
* WHO DATE Discription *
*********************************************************************
* VD 09/30/2013 Created program *
********************************************************************/
#include<iostream>
#include<fstream>
[Code] .....
View 3 Replies
View Related
Nov 8, 2013
I need to have a program display an error message if the variable entered isn't an integer but then I want it to cin again. I have this but it doesn't work:
cout << "Enter an Integer: " ;
for (;;) {
cin >> var;
if (!cin) {
[Code] ....
I am not sure how to do what I want and this doesn't work, it just repeats That wasn't an int.. over and over again.
View 8 Replies
View Related
Dec 3, 2014
I have an if statement that should either match a text variable that the user has entered and a another text variable that has been got from an array but they won't match even if they are the same,Im at a lost with it.
void displayQuestion(int noQuestion, string questionArray[], string answerarray[], string answer, double scorearray, double finalscore){
cout << questionArray[noQuestion] << endl;
cout << "enter an answer " << endl;
cin >> answer;
[Code] ....
View 1 Replies
View Related
Feb 10, 2013
I am modifying a set of static variables inside of the class's member function. The static variables are private. An example of what I'm doing is as below,
utilities.h
-----------
class utilities {
private:
static int num_nodes;
public:
void parse_details(char* );
[Code] ....
I get a compilation error in the function void utilities::parse_details(char* filename)
which says: undefined reference to `utilities::num_nodes'
compiler: g++
View 2 Replies
View Related
May 10, 2013
I would like to convert a float or double variable into unsigned char variable and back.
float number_float = 23.453f;
unsigned char* number_char = (unsigned char*)malloc(sizeof(float));
number_char = reinterpret_cast<unsigned char*> (&number_float);
float* number_float_0 = reinterpret_cast<float*>(&number_char);
I am not getting the same value back.. why?
View 2 Replies
View Related
