I have to create a list of words and then when one is repeated the program has to show with a message.
Code:
#include <vcl.h>
#include <iostream.h>
#include <conio.h>
#include <string.h>
#pragma hdrstop
[Code] ....
I'm brand new to coding, and I'm learning C. To start, I wanted to create a program that would show an integer between 1-1000 as words (such as 157=One Hundred and Fifty Seven)
I'm having trouble with the switch-case function. I know that what I'm doing all works until it hits the switch function. I've tried switching one of the strcpy functions out with a printf, followed by a system("PAUSE") function, and it gave me results, so I know that the switch function is accepting my "hund" integer. I believe my problem lies within the strcpy function, and its use in the case function.
In short, why isn't the strcpy function working in the switch-case function? Below is my code as it is:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main() {
int num;
int hund;
char letHund[20];
[Code] .....
I've taken part the text into 1 word per line, but I can't figure out how to printf every word only once and then add (%d) in the end to show how many repetitions of that word there are.
Code:
#include <iostream>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
using namespace std;
int main(){
char *oneword;
[Code] ....
How I message show, when session expired?
without web.config
I am working on visual Studio 2008(3.5)
I have created an error message if the user inputs the wrong selection number
if (choices < 1 || choices > 5)
{
cout << "
Please Enter a number between 1-5
";
}
How would i create a error message if the user inputs letters/words instead of a number.
I'm trying to make program that will read text from a file and show what words occur how many times. I'm trying to make it so that if a new string comes, it saves it into wlist[], and counts 1 to wcount[]. If the same word is there, it will just add 1 to wcount[]. The program will end when it gets to the end of a file.
I don't know the reason, but I can't get strcmp and strcpy to work. I had to put a pointer in curword, just to make it compile.
Code:
#include <stdio.h>
#include <string.h>
#define LIST_MAX 100
#define WORD_MAX 20
int main(){
[Code] ....
I am starting this project on how to encode and decode messages that are inputted, how to start this?
View 4 Replies View RelatedI receive messages over a bus. Suppose there is a function to read the messages storing them into a struct defined as follows:
typedef struct
{
ULONG timestamp;
BYTE ID;
BYTE data_length;
BYTE data[8];
} MSG_FRAME;
Depending on the message ID different messages represent different values for one project.For example msg with ID 10 can include in the 8 bytes something like:
width: 6 bits
height: 6 bits
actpos: 12 bits
maxpos: 12 bits
minpos: 12 bits
range: 16 bits
total: 64 bits = 8 bytes
Printing the message is no big deal. But here comes the tricky part. I want to print out the specific information hidden in the 8 bytes. I can define the structures for every msg ID and compile the program with this "special" header file, but I want to do it during runtime of the program, loading the information regarding the msgs, because i can have different projects where the information for different msg IDs can differ.
I've a non-C file, where basically all the information is written. Lets stay frame named
GetStatus{
bit 0 - 7 width
bit 8 - 15 height
.
.
}
etc.
How to read it on runtime and decode the messages? On runtime I'm not able to create variables and structures anymore!
Creating a C program that can pick words in a string or array and save it in different location, later combine everything in one string or array. It will be using simple programming C code. For example (arrays, pointer) but not interrupts or other string functions.
In a sentence like this:
Size= 70
$--GSV,x,x,x,x,x,x,x,...*hh $--GGA,hhmmss.ss,llll.ll,a,yyyyy.yy,b,x,xx,x.x,x.x,M,x.x,M,x.x,xxxx*hh $--GLC,xxxx,x.x,a,x.x,a,x.x,a.x,x,a,x.x,a,x.x,a*hh $--GSA,a,a,x,x,x,x,x,x,x,x,x,x,x,x,x,x,x.x,x.x,x.x*hh
The program must capture the $--GGA string then extract from this string:
1) hhmmss.ss
2) IIII.II
3) a (if a = to N or S replace N or S with + or - respectively )
4) yyyyy.yy 5) b (if b = to E or W replace E or W with + or - respectively )
Save them in an array and display as well. After all the saving, the program should combine them to one string. That the final output.
Have tried to track down the delay? Which function takes that long? Have you printed some logs or measured the time of the functions? No I am not sure how to do that! I debugged it but i didn't see any difference! I definitely think its the logic in the receive code that's "inefficient" what do you think about that? Do you think there's a more efficient way of receiving messages and sending them? Because what I am doing is receiving one then calling send and sending that message out to all users then receiving another one then calling send and sending it out to all users and repeating that process till all the messages are sent, both methods are using a loop to send to all users. DO you think i should receive all messages then send them all out at once? or is that less efficient?
View 4 Replies View RelatedThe label "You already picked that" doesn't always appear. Sometimes it does, but only if a duplicate has been entered at least 3 times. I haven't been able to correct this. I am new to programming and array-based lists.
//Objective: randomly generate an integer between 1 and 100, input user guess as to what number it is, and output "correct!" if user guess is the random number, or output "Too high" if the user guess is too high, or output "too low" if the user guess is too low, "you already entered __" if a duplicate is entered and allow the user to keep guessing until they guess the correct number
//libraries
#include <ctime>
#include <cstdlib>
#include <iomanip>
#include <iostream>
using namespace std;
struct Guess {
[Code] ....
I have problem reading CSV file, i found many solutions but i still got one problem. I need to read CSV file and then these values show in List Control and here i have problem. Idk how to display it in List?
View 4 Replies View RelatedCreating a 2D array . I wrote the following code and I get a error from the system that said
"error C2144: syntax error : 'int' should be preceded by ';'"
#include "stdafx.h"
#include <iostream>
using namespace std;
int main ( )
int _tmain(int argc, _TCHAR* argv[]) {
int row = 1;
int col = 1;
[code]....
Is my code or anything gone wrong?
I just want to make a WORD GUESSING GAME which when you play it and got the correct word will ask you to play again then it will automatically randomized the words in the array list.. then when you play the game, the words will not repeat until you played them all then it will stop.
#include <iostream>
#include <conio.h>
#include <stdio.h>
#include <string>
#include <windows.h>
#include <ctime>
using namespace std;
#include <process.h>
void gotoxy(short x, short y)
[code]....
I'm given a list of words that need to be read in from a file and then sorted. I was given a certain way to do it .
Code:
#include <stdio.h>
#define MAX 100
void print_ar(char x[][MAX], int size);
int strcomp(char x[], char y[]);
int strlength(char x[]);
void selection_sort(char c[][MAX], int size);
void strcopy(char x[], char y[]);
[Code] ...
Here are some words from the list
school
aibohphobia
lists
alula
bake
cammac
civic
I cannot figure out what is wrong at the moment. .
I'm trying to print a single linked list backward with functions/classes. I have created the main file and 3 header files. But I'm getting an error on one of the header files, linkedListIterator after adding #include "linkedListType.h". It says that "linkedLlistType.h" is calling itself. And when I try to run it, I get an error of "too many header files." I have tried changing the headers many times, but nothing seems to work.
.cpp file:
/*(Printing a single linked list backward) Include the functions reversePrint and recursiveReversePrint, as discussed in this chapter, in the class linkedListType. Also, write a program function to print a (single) linked list backward. (Use either the class unorderedLinkedList or the class orderedLinkedList to test your function.)*/
#include "linkedListType.h"
#include "orderedLinkedList.h"
#include "linkedListIterator.h"
#include <iostream>
using namespace std;
struct nodeType
[Code] ....
header files:
[URL] .... (error in this header file)
[URL] ....
I just dont know how to get my upper case and lower case equal...heres the program: Write a program to calculate utility cost for ACME UTILITY COMPANY. The company has 3 types of customers (R) residential, (C) Commercial and (G) government. Customers are billed based on the number of kilowatts used and they type of customer they are (R,C,or G).
Residential cusstomers are charged 0.25 cents per kilowatt hour for the first 500kw used, and 0.35 cent per kwh for all kw used over 500.Commercial customers are charged 0.22 cents per kilowatt hour for the first 999kw used, 0.29 cents per kwh for all kw used over 999 kw up to 1999 and 0.45 cents per kwh for all kilowatts used greater than 1999. Commercial customers that use over 2000 kw are charged a special surcharge of 100.0 in addition to the regular charges.
Government customers are charged 0.34 cents for the first 1500 kwh used(<=1500). 0.30 cent for the next 1000 kwh(1501-2500) and 0.25 cents for all kwh used over (>=2501)
in addition residential customer are charged .5% tax on the cost utilities while Commercial customers are 5% tax on the cost of utilities not including the special surcharge Government customers are not charged a tax
Code:
#include <stdio.h>
#include <math.h>
int main(void)
{
int R;
int ct;
int kwh;
int taxes;
int surcharge;
int charge
}
[code].....
the program should quit with Q and calculate the amount owed, utility charge, and surcharge
I have a code able to import a file containing words and numbers to a linked list, but I also need to sort this linked list alphabetically. I've done research on this involving bubble sorting, but no explanationcan achieve this objective.
Below is the code that can only put the file into linked list:
Code:
#include<iostream>
#include<conio.h>
#include"U:C++WordClass2WordClass2WordClass.cpp"
#include<fstream>
#include<vector>
#include<string>
using namespace std;
[Code] .....
Creating the methods for class List
main.cpp Code: #include "List.h"
int main( )
{
List la; // create list la
la.push_front( "mom" );
la.push_back( "please" );
la.push_back( "send" );
la.push_back( "money" );
la.push_front( "hi" );
cout << "
la contains:
" << la << '
[code]...
I've been making a circular linked list and I'm trying to assign each list a "name" and its next "link" but when I run my code it crashes.
Soldier *Head;
Head = NULL;
string names[] = {"Arman","Bogut","Castro","Damascus","Elene"};
for (int i = 0; i < 5; ++i) {
[Code] .....
I would like to have a List with Lists. (every list with have strings ints and i would like to be able to have all the lists in a array) is this approach too expensive and i will have problem with the memory or something? is it better if i have a list with the names of the lists and access them that way?
In order to give a better understanding of what i need this is what im trying to do but throws errors:
public List<MusicItem> Theme1 { get; set; }
public List<List<MusicItem>> AllThemes { get; set; }
AllThemes = new List<List<MusicItem>> {
Theme1 = new List<MusicItem> {
[Code] .....
I am creating linked list of memory blocks. Allocate a block of 512 bytes and insert into the first node of list. then Allocate a 2nd block of same size and add to the list. now free each block from the list.
View 14 Replies View RelatedHow would I go about creating a tree like structure using linked lists, I am thinking of making a rubix cube solver program, what I want to do create nodes that each do one operation like turn left, right, up, down but I dont know how to go about starting this.
View 2 Replies View RelatedIm trying to do something like this:
private List<Calm> calm = null;
private List<Horror> horror = null;
private List<Battle> battle = null;
[Code].....
I want with lists[0][0].Name to get the Name variable from the first item of the list calm, but this doesnt working, is there any other way to do it?
Code:
#include <stdlib.h>
#include <stdio.h>
typedef struct characterNode {
char c;
characterNode *prev;
characterNode *next;
} CharacterNode;
[Code]...
What's wrong with this? People told me that casting malloc was bad, but I don't understand what struct cn *temp is doing.
Also, could I create something like:
Code: typedef CharacterNode *CharacterNodePtr To be a pointer to my struct type? Why would that be beneficial?
I need to create a templated doubly linked list, with an iterator class within the list class. This program is to function just like the STL list class but I only need to implement functions that I am using, My trouble is I am kind of clueless on the iterator part and the fact that the list is templated is giving me syntax grief. I have pasted the code I have done so far.
1. On the syntax implementing the list and iterator functions outside of the class
2. I am not sure when to deference the iterator in the functions, but think I have it right so far
3. For the reverse function can I copy the list into a new list in reverse then re add them to the original list overwriting the same values? I have the code I have so far there
4. For the iterator erase function, I am not sure if I am deleting the node correctly.
5. I am not sure if I need template <typename T> above the iterator functions. Does the iterator class need to be a template? Right now it is not.
// Templated doubly linked list class
#include <iostream>
using namespace std;
template <typename T>
class list {
private:
Node *head;
Node *tail;
[Code] ....
