I have problem reading CSV file, i found many solutions but i still got one problem. I need to read CSV file and then these values show in List Control and here i have problem. Idk how to display it in List?
View 4 Repliesif I want load the file as vector and I want to show on the screen using the new loop for why it only show the last lopp this is a example of my thought why is this not right?
int numb[3];
ifstream output;
output.open("1.dat");
while(!output.eof())
{
output>>numb[3];
}
//assuming there are 3 number in vector
for(int i=0; i<2;i++)
{
cout<<numb[i];
}
I have an MDI application using different menus depending on the current document template in use.
I need to show the top-level File Menu from the IDR_MAINFRAME window when a command is sent from the active document.
I would like to application to deactivate the active child window and then show the File menu as if the alt-F key was pressed from the keyboard.
I have tried CMenu *pMenu=AfxGetMainWnd()->GetMenu();
but this does not display the menu at all.
I just got a job programming a windows application. One of the requirements is reading and writing values from an excel spreadsheet. Looking online, it appears that C++ isn't the best (one of the worst?) languages for reading and writing values from excel files. Now the language I'm most familiar with is C++ and I've been looking at C#, and it appears to be much easier to read excel files.
View 8 Replies View RelatedMy problem is that I need to take a csv or excel file with tens of thousands of datapoints, write all points in a section of column to an array, perform calculations on them, and then write it back into another column.
I've been looking all over the internet for ways to do this easily. So far I have not found anything that I can follow and implement.Some codes have been slightly useful, but they aren't commented in a way I can understand. How to write code to take, for instance, lines from column b between 500-1000, write them to an array, and write another array 500 characters in column c. If that code could be commented, I have tried a few different techniques (counting commas), but haven't gotten anything to work.
I have a .txt with a 0 or 1 to each line of the txt file. there are many values to read. I am reading the values and calculating how many each reoccur in a sequence (run-length encode). If i only use say 50 values coming in it works, but once i do the hundreds there are in the file it hangs. i am not sure why.
Code:
#include<stdio.h>
#include<string.h>
#include<stdlib.h>
FILE *infile;
FILE *outfile;
void PrintBinary(int x,int y);
[Code] ....
We are supposed to split this lab into 3 files a .h and 2 .cpp's. The code I'll be talking about is going to be directed at the main.cpp file. Basically we are supposed to be able to enter as many classes into the program and when you are done the program is supposed to save the contents into a .dat file. This lab is working off of an older lab so I already have a .dat file I am trying to test with this program by reading it into my program when I first run it I prompt if the user wants to load previously entered courses and if they reply with a 'Y' the program will load the contents of the .dat file. Problem is right now when I load from the .dat file only the first class is correct. Every other class after that is just giberish. I've tried everything but can't get the restore part working. I also cannot get the save to .dat portion of this lab working either.Here is my code:
#include "Course.h"
#include <iostream>
using std::cout;
using std::cin;
using std::endl;
using std::ios;
[code]....
I am trying to read an array values from Tmin.txt file. I take array size from user viz. number of raw & column and then, read the following data from Tmin.txt file which look like this:
20 40 20 25 30
20 30 40 20 25
20 40 20 25 30
20 30 40 20 25
30 40 40 30 40
I am using getline, and then converting it to int by using atoi. But my code is not working.
Code :
// reading a text file
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
[Code] ....
My game is a sort of RPG with stats, money etc. I just recently added a save/load system using writing to a file. I initially got writing to a text file to work, then I got loading to work too.I eventually was able to read numbers from the file and assign them to integer variables in order.
My issue was I wanted to check if a save file existed, if it did, load it up, if it did not, go to character creation. I had a lot of trouble with this and after trying different code snippets to work I finally got it to check if a file existed, and execute the appropriate code.
My issue now is my code USED to go through each entry and assign variables in order.
Like the first number in the text file would be for the variable money, and it would read it, assign to to int money and scroll to down to the next variable for player strength, assign to to playerstr variable and so on. After making the tweak for loading it no longer functions like this, and makes the last entry in the text file the value for everything.
Here's my code:
Save Code:
{
ofstream savegame;
savegame.open("C:/Sounds/savegame.dat", ios::trunc);
savegame << money << endl;
savegame << playerstr <<endl;
[Code]....
I barely get how this code works, how can I tweak it to go through the file in order and assign variables one at a time?
At the current moment, it assigned the playerstr value to both money and playerstr int. But the save file being created lists the correct values in order.
I am trying to read hex data from a file (not just hex values in text format). I was able to read it (02 EC) with "fread" into an char before but I need to change the Hex value into an integer in decimal.
I already read about strtol but I would prefer reading the hex Value into an integer.
Here is my code so far:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main() {
int itrack1[1];
int itrack2[1];
[Code] ....
I am trying to open any selected textfile and have the text input be sent to a listbox... Originally I wrote this code for a textbox which worked great now that I am converting it to a listbox it doesnt seem to work so much. I left the default item names in order for better understanding of what is going on.
private void button1_Click(object sender, EventArgs e) {
if (openFileDialog1.ShowDialog() == System.Windows.Forms.DialogResult.OK) {
label1.Text = openFileDialog1.FileName;
listBox1.Items.Add = File.ReadAllText(label1.Text);
}
}
I am trying to read the file which has the values stored in the following pattern
2 4 10 103 2 504 .... and so on
I Have opened the file and then passed the opened file to another function to process it further.
here is my code
#include <iostream>
#include <fstream>
#include <vector>
#include <stdlib.h>
[Code].....
now the problem is when the control exits the "while loop" in the function "readingValues(std::ifstream& myFile)it goes straight to catch block ?
Code:
void loadData(fstream& fin, nodePtr head){
if (fin.eof()) {
return ;
}
else
[Code] .....
This is my function and it is not working.
Code:
#include <iostream>
#include <fstream>
#include <cstdlib>
#include <iomanip>
#include "contacts.h"
using namespace std;
[Code] ....
Lines 29-32 I have a good feeling very wrong. Now I have never learned how to do this and my book covers nothing over this. I just took my final in C++ so this is not homework. I am trying to get better before Data Structures start next month.
I am attempting to read values from a file into a 2d array temp[31][2] (31 rows, 3 columns).I only want the values from the file to be read into the first two columns.I believe I am accomplishing that but when I go to print the array, I expect the first two columns to have the file data and the third column to have all zeros. The third column, however is printing such that the value is the next row/first column.
I'm not sure for instance why on the bottom loop for line 1 it doesn't print:
temp[0][0] temp[0][1] temp[0][2] 20 49 0 It instead prints: 20 49 1
Code:
#include <stdio.h> Code: #include <math.h>
FILE *inptr;
int main() {
int temp[31][2] = {0}, tempavg[31][2] = {0};
int i, j, k, sum;
inptr = fopen("ProgrammingProject14.txt", "r");
[code]....
So I have this text file that I am trying to read from and store the values of each line in multiple variables.
Let's say my text file contains
AXSYZ3482 Tom 100 112
and my code below here works fine when the lines in the text file is separated by spaces.
while (fscanf(fp, "%s %s %d %d
", userID, name, &startLoc, &endLoc) != EOF) {
printf("%s %s %d %d
", userID, name, startLoc, endLoc);
}
But let's say my file was to look like this instead.
AXSYZ3482:Tom:100:112
But if i try this below...
while (fscanf(fp, "%s:%s:%d:%d
", userID, name, &startLoc, &endLoc) != EOF) {
printf("%s %s %d %d
", userID, name, startLoc, endLoc);
}
It seem to store the entire line in userID including the ":". I want to ignore the ":"'s and store everything in between in respective varibles in the order specified above.
So first string in userID, then ignore the :, then second string in name, and ignore the next :, and so forth. How I can accomplish this?
I am trying to read in a text file and add strings from it word by word into a Linked List. I'm fairly new at C and don't quite understand pointers. I've had a few different errors just messing around with it, but now I'm getting an infinite loop within my main program.
Code:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
struct listNode { /* self-referential structure */
char data[50];
struct listNode *nextPtr;
[Code] ....
When I run my full code, it prints 12345ooooooooooooooooooooooo...etc. In my test file the first word is "Hello" so that's where the infinite 'o's come from. If the outer loop is the one that is infinite, then wouldn't the second while loop also execute more than once? What I mean is, why is the second print statement the only one that repeats itself?
I've been trying to write my homework assignment (a list of countries, their codes and their capitals) and I've done most of it but I'm stuck at this: I have to open a file, read it and if there are data, add them to the list. So far I've created an element of the structure, queue list, printed the list on the screen and freed the memory. I thought that for reading the file and adding the data I could first open the file (of course) with fopen and after that use a for loop (i=0;i=!EOF;i++) to scan the whole file and fscanf(fp,"%s",result->country),etc in the loop to add the data to the structure of the element and finally insert that element to the queue list. However, when I try to do these operations, I only get to writing the name of the file and the program crashes.
Code:
#include<stdio.h>
#include<stdlib.h>
#include<string.h>
struct List {
char country[20];
char code[5];
char capital[20];
struct List*next;
[Code] .....
I have a data file that looks like:
111111111
Lisa
Porter
3
ENEE 114
CMSC 412
ENME 515
333333333
Alex
Simpson
1
CMSC 412
***
In the form student ID and then first name last name number of courses and finally the course code(s). Im currently attempting to read these into linked lists with the following code:
#include<stdio.h>
#include<string.h>
#include<stdlib.h>
struct CourseInfo {
int courseID;
char courseName[30];
[Code] ......
I get no errors or warnings however when i print this out i get:
111111111
Lisa
Lisa
Porter
3
ENEE 114
CMSC 412
ENME 515
And then the program crashes. So i know that for some reason the problem is the
fgets(rootPtr->FirstName, 22, p);
But I do not know why because it seems to work for the other fgets. I also want to know why the while loop never runs and it crashes instead.
I have to initialize my stack (done by linked list) and I have a txt file for that. It looks like
123 Mike Smith 3.5 BA
124 John Weasly 2.9 CD
Here is what I have done so far:
However, I cannot reach any result.
Let me update:
123 Mike Smith 3.5 BA
124 John Weasly 2.9 CD
Here is what I have done so far:
struct Record{ //struct
float number;
char name[10];
char surname[10];
float GPA;
char mark[SIZE];
Record *next;
};
[Code]...
Why program crashes when reading linked List from file?
#include <iostream>
#include <fstream>
using namespace std;
struct link{
int data;
link* next;
[Code] .....
I am trying to write a program that will open a file with 2 points, take those points, determine what quadrant those points are in, and save the result back into the same file without truncating the data.
I'm having some trouble with my file I/O. I can't get my program to read the two values for X and Y that I put in the points.txt file. It simply uses whatever random number was used last time in that block of memory. In my points.txt file I put something like "4 -5" and it wont assign those numbers to my X and Y variables. I believe the issue is on line 25
#include <iostream>
#include <fstream>
using namespace std ;
int main() {
//defining X and Y
double X, Y ;
[Code] ....
I have written an program to emulate a shopping list. Everything works fine, until I try to read in from a file. Here is my read and write code (the write code looks like it is working ok, but I figured I would include it just in case), and an example of what happens to a list that has been written, then read back in.
I took this list, and wrote it to a file, then read that file back in. The .txt file looks like everything was written out properly, but when I try to read that exact same list back in, this is what I get:
I'm having a problem in my Library assignment, this section of my code is for reading in books saved in a 'book.dat' file on my desktop and inserting them into the linked list. It kind of works, but say if there is two books in the file, it only saves the second book twice.
eg in book.dat:
123 book1 Tolkien 2009 0
111 book2 Rowling 2009 0
So once these are read in, and I call my method displayAll(), it would display the second book twice..
void importFromFile(FILE *fp) {
struct book *aBook;
struct node *aNode;
aBook = (struct book *)malloc(sizeof(struct book));
[Code] .....
I am developing application software.entering two textbox value,while click or pressing tab button in third textbox, the result needs to show in third textbox.
View 1 Replies View RelatedI am wanting to be able to add as many different instances of data, while the user has not stated 'n', but then it only ever writes back to the screen the input for the last set of data. Where as I want to display back to the screen all the data that has been entered.
Code:
#include <iostream>
#include <string>
/*Function Declaration*/
void createItem();
void returnItem();
//Items structure
[code]...