C++ :: Program Is Not Reading In Values From DAT File Correctly
May 20, 2013
We are supposed to split this lab into 3 files a .h and 2 .cpp's. The code I'll be talking about is going to be directed at the main.cpp file. Basically we are supposed to be able to enter as many classes into the program and when you are done the program is supposed to save the contents into a .dat file. This lab is working off of an older lab so I already have a .dat file I am trying to test with this program by reading it into my program when I first run it I prompt if the user wants to load previously entered courses and if they reply with a 'Y' the program will load the contents of the .dat file. Problem is right now when I load from the .dat file only the first class is correct. Every other class after that is just giberish. I've tried everything but can't get the restore part working. I also cannot get the save to .dat portion of this lab working either.Here is my code:
#include "Course.h"
#include <iostream>
using std::cout;
using std::cin;
using std::endl;
using std::ios;
[code]....
View 1 Replies
ADVERTISEMENT
Jan 28, 2015
I have written an program to emulate a shopping list. Everything works fine, until I try to read in from a file. Here is my read and write code (the write code looks like it is working ok, but I figured I would include it just in case), and an example of what happens to a list that has been written, then read back in.
I took this list, and wrote it to a file, then read that file back in. The .txt file looks like everything was written out properly, but when I try to read that exact same list back in, this is what I get:
View 10 Replies
View Related
May 12, 2014
So, I have the beginnings of a rock paper scissors game which i have created before in Java, and i am attempting to create it in c++.
Problem is, the function "int checkConvertInput" containing a loop to make sure input is valid, is not exiting the loop. As far as i can see the two strings are not comparing. Is there a library function for this? I know C had strcmp but i am not sure if it applies here.
#include <iostream>
#include <string>
#include <vector>
using namespace std;
int checkConvertInput(int playerSign, string signs[]);
[Code] ....
View 6 Replies
View Related
Jan 21, 2014
My problem is that I need to take a csv or excel file with tens of thousands of datapoints, write all points in a section of column to an array, perform calculations on them, and then write it back into another column.
I've been looking all over the internet for ways to do this easily. So far I have not found anything that I can follow and implement.Some codes have been slightly useful, but they aren't commented in a way I can understand. How to write code to take, for instance, lines from column b between 500-1000, write them to an array, and write another array 500 characters in column c. If that code could be commented, I have tried a few different techniques (counting commas), but haven't gotten anything to work.
View 9 Replies
View Related
Oct 5, 2013
I have a .txt with a 0 or 1 to each line of the txt file. there are many values to read. I am reading the values and calculating how many each reoccur in a sequence (run-length encode). If i only use say 50 values coming in it works, but once i do the hundreds there are in the file it hangs. i am not sure why.
Code:
#include<stdio.h>
#include<string.h>
#include<stdlib.h>
FILE *infile;
FILE *outfile;
void PrintBinary(int x,int y);
[Code] ....
View 3 Replies
View Related
Mar 25, 2013
I am trying to read an array values from Tmin.txt file. I take array size from user viz. number of raw & column and then, read the following data from Tmin.txt file which look like this:
20 40 20 25 30
20 30 40 20 25
20 40 20 25 30
20 30 40 20 25
30 40 40 30 40
I am using getline, and then converting it to int by using atoi. But my code is not working.
Code :
// reading a text file
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
[Code] ....
View 5 Replies
View Related
Apr 12, 2014
My game is a sort of RPG with stats, money etc. I just recently added a save/load system using writing to a file. I initially got writing to a text file to work, then I got loading to work too.I eventually was able to read numbers from the file and assign them to integer variables in order.
My issue was I wanted to check if a save file existed, if it did, load it up, if it did not, go to character creation. I had a lot of trouble with this and after trying different code snippets to work I finally got it to check if a file existed, and execute the appropriate code.
My issue now is my code USED to go through each entry and assign variables in order.
Like the first number in the text file would be for the variable money, and it would read it, assign to to int money and scroll to down to the next variable for player strength, assign to to playerstr variable and so on. After making the tweak for loading it no longer functions like this, and makes the last entry in the text file the value for everything.
Here's my code:
Save Code:
{
ofstream savegame;
savegame.open("C:/Sounds/savegame.dat", ios::trunc);
savegame << money << endl;
savegame << playerstr <<endl;
[Code]....
I barely get how this code works, how can I tweak it to go through the file in order and assign variables one at a time?
At the current moment, it assigned the playerstr value to both money and playerstr int. But the save file being created lists the correct values in order.
View 5 Replies
View Related
Dec 1, 2013
I am trying to read hex data from a file (not just hex values in text format). I was able to read it (02 EC) with "fread" into an char before but I need to change the Hex value into an integer in decimal.
I already read about strtol but I would prefer reading the hex Value into an integer.
Here is my code so far:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main() {
int itrack1[1];
int itrack2[1];
[Code] ....
View 11 Replies
View Related
Oct 11, 2013
I am trying to read the file which has the values stored in the following pattern
2 4 10 103 2 504 .... and so on
I Have opened the file and then passed the opened file to another function to process it further.
here is my code
#include <iostream>
#include <fstream>
#include <vector>
#include <stdlib.h>
[Code].....
now the problem is when the control exits the "while loop" in the function "readingValues(std::ifstream& myFile)it goes straight to catch block ?
View 9 Replies
View Related
Dec 26, 2012
I have problem reading CSV file, i found many solutions but i still got one problem. I need to read CSV file and then these values show in List Control and here i have problem. Idk how to display it in List?
View 4 Replies
View Related
Apr 4, 2014
I am attempting to read values from a file into a 2d array temp[31][2] (31 rows, 3 columns).I only want the values from the file to be read into the first two columns.I believe I am accomplishing that but when I go to print the array, I expect the first two columns to have the file data and the third column to have all zeros. The third column, however is printing such that the value is the next row/first column.
I'm not sure for instance why on the bottom loop for line 1 it doesn't print:
temp[0][0] temp[0][1] temp[0][2] 20 49 0 It instead prints: 20 49 1
Code:
#include <stdio.h> Code: #include <math.h>
FILE *inptr;
int main() {
int temp[31][2] = {0}, tempavg[31][2] = {0};
int i, j, k, sum;
inptr = fopen("ProgrammingProject14.txt", "r");
[code]....
View 8 Replies
View Related
May 6, 2013
So I have this text file that I am trying to read from and store the values of each line in multiple variables.
Let's say my text file contains
AXSYZ3482 Tom 100 112
and my code below here works fine when the lines in the text file is separated by spaces.
while (fscanf(fp, "%s %s %d %d
", userID, name, &startLoc, &endLoc) != EOF) {
printf("%s %s %d %d
", userID, name, startLoc, endLoc);
}
But let's say my file was to look like this instead.
AXSYZ3482:Tom:100:112
But if i try this below...
while (fscanf(fp, "%s:%s:%d:%d
", userID, name, &startLoc, &endLoc) != EOF) {
printf("%s %s %d %d
", userID, name, startLoc, endLoc);
}
It seem to store the entire line in userID including the ":". I want to ignore the ":"'s and store everything in between in respective varibles in the order specified above.
So first string in userID, then ignore the :, then second string in name, and ignore the next :, and so forth. How I can accomplish this?
View 2 Replies
View Related
Jan 28, 2014
I am trying to write a program that will open a file with 2 points, take those points, determine what quadrant those points are in, and save the result back into the same file without truncating the data.
I'm having some trouble with my file I/O. I can't get my program to read the two values for X and Y that I put in the points.txt file. It simply uses whatever random number was used last time in that block of memory. In my points.txt file I put something like "4 -5" and it wont assign those numbers to my X and Y variables. I believe the issue is on line 25
#include <iostream>
#include <fstream>
using namespace std ;
int main() {
//defining X and Y
double X, Y ;
[Code] ....
View 14 Replies
View Related
Feb 7, 2015
My program isnt averaging correctly.
#include <iostream>
#include <string>
#include <iomanip>
#include <cstdlib>
using namespace std;
struct nameGPA {
[Code] .....
View 4 Replies
View Related
Jun 20, 2014
I am getting this weird error when calculating sums. Here is what my program does: it generates two random numbers and then randomly puts either an addition or subtraction sign between the two and then I am asked to enter what the correct answer for that question is. But on some of the subtraction questions when I give the answer it says I got it wrong after which the program shows the right answer. What's confusing is that the answer the computer calculates is the same that I entered. Anyways the complete program and a screenshot of the console window which shows the error are below. The function in question here is decAddSub at line 54. The error is shown in the first sum in the output window. It doesn't affect addition problems and only affects some of the subtraction problems.
#include<iostream>
#include<stdlib.h>
#include<time.h>
#include<random>
[Code].....
View 2 Replies
View Related
Feb 13, 2015
how to read file twice in a single program?
View 4 Replies
View Related
Jan 24, 2014
I have a program that makes a .txt file and I am trying to read it and it won't.
#include <iostream>
#include <string>
#include <fstream>
using namespace std;
int main() {
string fershizzle;
[Code] .....
View 13 Replies
View Related
Mar 19, 2013
I'm working with parallel arrays, one handles the titles and the other handles the ratings. Now everything works fine if the title doesn't start with a number, but if I decide to use a number infront of the title, when it reads it from the .txt file it thinks it is part of the rating.
Here is what I mean:
1234567891011121314151617181920212223242526272829303132333435363738394041424344
LOADING DATA FROM FILE...
MENU
1. Add Movie
2. Print All
3. Exit
------------------------------------------------------
Enter 1-3 : 2
PRINT ALL
------------------------------------------------------
Hitch 98% FRESH
Happy Gilmore 99% FRESH
Transformers 2 100% FRESH
SpongeBob 10% ROTTEN
MENU
[code]....
As you can see, the '2' from 2 Fast 2 Furious went to the rating in SpongeBob.
Here is what it looks like inside the .txt file:
Hitch| 98Happy Gilmore| 99Transformers 2| 100SpongeBob| 102 Fast 2 Furious| 100
Here is my code:
void SaveToFile(const string titles[], const int ratings[], int count)
{
string filename;
ofstream outfile;
filename = "tomatoes.txt";
outfile.open(filename);
PrintToText(outfile, titles, ratings, count);
WriteLine(cout, '=', 54);
[code]....
View 3 Replies
View Related
Feb 15, 2014
I'm not sure why my program isn't reading data from the dat file. I'm not sure if it's because I messed up my pointers, or I'm missing something. I know we usually use Infile >> blah >> blah >> blah; to get the data from the file, but my instructor showed an example that had the struct read it for you in this format and I could just call it with pointers.
#include <iostream>
#include <iomanip>
#include <fstream>
#include <assert.h>
using namespace std;
using namespace System;
typedef int Integer;
[Code] ....
View 12 Replies
View Related
Apr 12, 2015
Im trying to read from a file, line by line, with no specified number of values in the file. Check out my code:
int main() {
string x;
ifstream fin;
int count = 0;
char ch;
fin.open("CWC_Master.txt");
if(!fin)
[Code] .....
Now, this works great! However, its skipping some lines. And I dont know why. For example: Lets say that the input file is:
superman toy
sm2335
19.99
batman toy
bm5532
25.99
aquaman toy
am6786
26.00
Where it should output the above, instead it outputs every other one. Like:
superman toy
19.99
batman toy
25.99
aquaman toy
26.00
How can I fix my code so that it SIMPLY(i say simply because I am still a beginner coder) can read line by line?
View 7 Replies
View Related
Sep 18, 2014
I am trying to get my program to calculate what point goes in what quadrant using a file. But msy program is not reading the values from the file and also it is not running so im not sure what's wrong with it.
//This program uses a fstream object to write data that will read the values of a (x,y) point from a file.
//add the appropriate preprocessor
#include <fstream>
#include <iostream>
[Code].....
View 6 Replies
View Related
Jun 2, 2013
I have a procedure that prints the fields of ethernet frames and ip headers. I have an issue with the src mac addr being printed incorrectly and incompletely. The part in red is the trouble code.
Code:
1#include "sniffer.h"
2
3void print_headers(struct ethhdr * ethhdr, struct ip * iphdr){
4
5 char ipstr_src[INET_ADDRSTRLEN];
6 char ipstr_dst[INET_ADDRSTRLEN];
7 char macstr_dst[ETH_ALEN], macstr_src[ETH_ALEN];
[Code] ....
View 2 Replies
View Related
Oct 10, 2014
Why this program won't correctly print the proper totals on screen? See my code and the included screenshot.
Code:
#include <stdio.h>
int main(void) {
int total, first, second;
printf("Enter 2 numbers:
[Code] .....
View 4 Replies
View Related
Oct 3, 2013
I need to decrypt my text file and make it able to read in my program..
What I have programmed so far is to read the encrypted file, create a new file, decrypt it and read the newly created file..
I need to decrypt the encrypted file without having to create a new file that reads the decrypted text..
Well, Let me show you my code:
P.S Most of the include is not needed and I already know that Visual studio 2010 Windows Form Application CLR
Code:
#pragma once
#include "stdafx.h"
#include <iostream>
#include <fstream>
#include <conio.h>
[Code].....
You have my decryption code and the code I want to use..
I have uploaded the code for you to use on your computer because it is fairly hard for me to explain..
I want to be able to read the encrypted file in my program, without having to writing a new file to decrypt it..
Decrypted & Encrypted .txt file Included (And images)
--> Program .rar pack link <--
Build it with Visual Studio 2010
View 5 Replies
View Related
Nov 2, 2014
When I try to open the cpp source in Visual Studio, it just opens a blank notepad window. The cpp file says its 4 kb and there was code in it.
View 5 Replies
View Related
May 5, 2013
Why program crashes when reading linked List from file?
#include <iostream>
#include <fstream>
using namespace std;
struct link{
int data;
link* next;
[Code] .....
View 4 Replies
View Related
