C :: Reading Values From TXT File And It Hangs
Oct 5, 2013
I have a .txt with a 0 or 1 to each line of the txt file. there are many values to read. I am reading the values and calculating how many each reoccur in a sequence (run-length encode). If i only use say 50 values coming in it works, but once i do the hundreds there are in the file it hangs. i am not sure why.
Code:
#include<stdio.h>
#include<string.h>
#include<stdlib.h>
FILE *infile;
FILE *outfile;
void PrintBinary(int x,int y);
[Code] ....
View 3 Replies
ADVERTISEMENT
Jan 21, 2014
My problem is that I need to take a csv or excel file with tens of thousands of datapoints, write all points in a section of column to an array, perform calculations on them, and then write it back into another column.
I've been looking all over the internet for ways to do this easily. So far I have not found anything that I can follow and implement.Some codes have been slightly useful, but they aren't commented in a way I can understand. How to write code to take, for instance, lines from column b between 500-1000, write them to an array, and write another array 500 characters in column c. If that code could be commented, I have tried a few different techniques (counting commas), but haven't gotten anything to work.
View 9 Replies
View Related
Mar 15, 2013
Found an online suggestion of using an rc2 file and cut and paste stuff from .rc file to .rc2 file to see which line causes the problem but don't know how to create a blank .rc2 file. Problem started after I ported from VC++ 6 to VS2010.
View 5 Replies
View Related
May 20, 2013
We are supposed to split this lab into 3 files a .h and 2 .cpp's. The code I'll be talking about is going to be directed at the main.cpp file. Basically we are supposed to be able to enter as many classes into the program and when you are done the program is supposed to save the contents into a .dat file. This lab is working off of an older lab so I already have a .dat file I am trying to test with this program by reading it into my program when I first run it I prompt if the user wants to load previously entered courses and if they reply with a 'Y' the program will load the contents of the .dat file. Problem is right now when I load from the .dat file only the first class is correct. Every other class after that is just giberish. I've tried everything but can't get the restore part working. I also cannot get the save to .dat portion of this lab working either.Here is my code:
#include "Course.h"
#include <iostream>
using std::cout;
using std::cin;
using std::endl;
using std::ios;
[code]....
View 1 Replies
View Related
Mar 25, 2013
I am trying to read an array values from Tmin.txt file. I take array size from user viz. number of raw & column and then, read the following data from Tmin.txt file which look like this:
20 40 20 25 30
20 30 40 20 25
20 40 20 25 30
20 30 40 20 25
30 40 40 30 40
I am using getline, and then converting it to int by using atoi. But my code is not working.
Code :
// reading a text file
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
[Code] ....
View 5 Replies
View Related
Apr 12, 2014
My game is a sort of RPG with stats, money etc. I just recently added a save/load system using writing to a file. I initially got writing to a text file to work, then I got loading to work too.I eventually was able to read numbers from the file and assign them to integer variables in order.
My issue was I wanted to check if a save file existed, if it did, load it up, if it did not, go to character creation. I had a lot of trouble with this and after trying different code snippets to work I finally got it to check if a file existed, and execute the appropriate code.
My issue now is my code USED to go through each entry and assign variables in order.
Like the first number in the text file would be for the variable money, and it would read it, assign to to int money and scroll to down to the next variable for player strength, assign to to playerstr variable and so on. After making the tweak for loading it no longer functions like this, and makes the last entry in the text file the value for everything.
Here's my code:
Save Code:
{
ofstream savegame;
savegame.open("C:/Sounds/savegame.dat", ios::trunc);
savegame << money << endl;
savegame << playerstr <<endl;
[Code]....
I barely get how this code works, how can I tweak it to go through the file in order and assign variables one at a time?
At the current moment, it assigned the playerstr value to both money and playerstr int. But the save file being created lists the correct values in order.
View 5 Replies
View Related
Dec 1, 2013
I am trying to read hex data from a file (not just hex values in text format). I was able to read it (02 EC) with "fread" into an char before but I need to change the Hex value into an integer in decimal.
I already read about strtol but I would prefer reading the hex Value into an integer.
Here is my code so far:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main() {
int itrack1[1];
int itrack2[1];
[Code] ....
View 11 Replies
View Related
Oct 11, 2013
I am trying to read the file which has the values stored in the following pattern
2 4 10 103 2 504 .... and so on
I Have opened the file and then passed the opened file to another function to process it further.
here is my code
#include <iostream>
#include <fstream>
#include <vector>
#include <stdlib.h>
[Code].....
now the problem is when the control exits the "while loop" in the function "readingValues(std::ifstream& myFile)it goes straight to catch block ?
View 9 Replies
View Related
Dec 26, 2012
I have problem reading CSV file, i found many solutions but i still got one problem. I need to read CSV file and then these values show in List Control and here i have problem. Idk how to display it in List?
View 4 Replies
View Related
Apr 4, 2014
I am attempting to read values from a file into a 2d array temp[31][2] (31 rows, 3 columns).I only want the values from the file to be read into the first two columns.I believe I am accomplishing that but when I go to print the array, I expect the first two columns to have the file data and the third column to have all zeros. The third column, however is printing such that the value is the next row/first column.
I'm not sure for instance why on the bottom loop for line 1 it doesn't print:
temp[0][0] temp[0][1] temp[0][2] 20 49 0 It instead prints: 20 49 1
Code:
#include <stdio.h> Code: #include <math.h>
FILE *inptr;
int main() {
int temp[31][2] = {0}, tempavg[31][2] = {0};
int i, j, k, sum;
inptr = fopen("ProgrammingProject14.txt", "r");
[code]....
View 8 Replies
View Related
May 6, 2013
So I have this text file that I am trying to read from and store the values of each line in multiple variables.
Let's say my text file contains
AXSYZ3482 Tom 100 112
and my code below here works fine when the lines in the text file is separated by spaces.
while (fscanf(fp, "%s %s %d %d
", userID, name, &startLoc, &endLoc) != EOF) {
printf("%s %s %d %d
", userID, name, startLoc, endLoc);
}
But let's say my file was to look like this instead.
AXSYZ3482:Tom:100:112
But if i try this below...
while (fscanf(fp, "%s:%s:%d:%d
", userID, name, &startLoc, &endLoc) != EOF) {
printf("%s %s %d %d
", userID, name, startLoc, endLoc);
}
It seem to store the entire line in userID including the ":". I want to ignore the ":"'s and store everything in between in respective varibles in the order specified above.
So first string in userID, then ignore the :, then second string in name, and ignore the next :, and so forth. How I can accomplish this?
View 2 Replies
View Related
Jan 28, 2014
I am trying to write a program that will open a file with 2 points, take those points, determine what quadrant those points are in, and save the result back into the same file without truncating the data.
I'm having some trouble with my file I/O. I can't get my program to read the two values for X and Y that I put in the points.txt file. It simply uses whatever random number was used last time in that block of memory. In my points.txt file I put something like "4 -5" and it wont assign those numbers to my X and Y variables. I believe the issue is on line 25
#include <iostream>
#include <fstream>
using namespace std ;
int main() {
//defining X and Y
double X, Y ;
[Code] ....
View 14 Replies
View Related
Apr 12, 2015
Im trying to read from a file, line by line, with no specified number of values in the file. Check out my code:
int main() {
string x;
ifstream fin;
int count = 0;
char ch;
fin.open("CWC_Master.txt");
if(!fin)
[Code] .....
Now, this works great! However, its skipping some lines. And I dont know why. For example: Lets say that the input file is:
superman toy
sm2335
19.99
batman toy
bm5532
25.99
aquaman toy
am6786
26.00
Where it should output the above, instead it outputs every other one. Like:
superman toy
19.99
batman toy
25.99
aquaman toy
26.00
How can I fix my code so that it SIMPLY(i say simply because I am still a beginner coder) can read line by line?
View 7 Replies
View Related
Mar 24, 2014
Why is the program not working?
Code:
/* password valid if there is 1 uppercase 1 lowercase and 1 digit - problem: program hangs after first input. */
#include <stdio.h>
main() {
char password[200];
int i = 0;
int upper = 0;
int lower = 0;
int number = 0;
[code]....
View 5 Replies
View Related
May 2, 2013
So using InitiateSystemShutdownEx causes a Win32 machine to go log off go to the shutdown screen and just sit there displaying shutting down with the working indicator just spinning. I left the machine sitting there for an hour and it never shut down. This works fine on all the Win7 x64 machines we are using but the one 32 bit Win7 machine has this problem and it occurs no matter what parameters I pass.
Code:
HANDLE hToken;
TOKEN_PRIVILEGES tkp;
// Get a token for this process.
if (!OpenProcessToken(GetCurrentProcess(),
TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, &hToken))
return false ;
// Get the LUID for the shutdown privilege.
LookupPrivilegeValue(NULL, SE_SHUTDOWN_NAME,
&tkp.Privileges[0].Luid);
[code]....
This is working fine on Win7 x64 but not on the one Win7 32 system we have and like I said it starts the shutdown process just never finishes.
View 14 Replies
View Related
Apr 3, 2013
here is the link to question: [URL] ....
below is my code:
friendship relations #48.cppfriendship relations #48.cpp
I have some question in regards to the b part 2. My code is working fine when the number of input is low. However when I input more larger input data to my program it start to hangs.
Here is the input: [URL] ....
Output: [URL] ....
View 1 Replies
View Related
Aug 30, 2012
We are using the DownloadFile method of the WebClient class to download artwork via URLs for purchase orders, this works well for the most part, but hangs with certain file types. We never have problems with .pdf files, but .ai files (Illustrator) just hang with 0 bytes being downloaded, and then eventually times out after the default 60 seconds. Any similar activity while downloading files with the WebClient class? The files that are being downloaded are hosted on the same server, in the same directory.
if (validURL == true) {
WebClient client = new WebClient();
try {
client.Headers.Add("Accept: text/html, application/xhtml+xml, */*");
[Code] ......
View 1 Replies
View Related
Nov 26, 2014
It compiles fine but hangs during linking. The last message I got is
Code generation.
Sometime when I cancel it, I got
LNK1257 code generation failed
What can be possible reasons and how to diagnose?
View 10 Replies
View Related
Dec 22, 2014
I cant seem to read stuff in from my students.txt file which contains this
19992195 John Smith 20 05 1995 09 09 2011 15 05 2014 55 65 72 58 80 45 40 45 66 78 88 81
20051195 Mark Dobson 20 05 1995 09 09 2011 15 05 2014 55 65 72 58 80 45 40 45 66 78 88 81
20063196 Paula O'Reilly 20 05 1995 09 09 2011 15 05 2014 55 65 72 58 80 45 40 45 66 78 88 81
20053344 Aoife Cleary 20 05 1995 09 09 2011 15 05 2014 55 65 72 58 80 45 40 45 66 78 88 81
It has something to do with the lines at the bottom of the code. It doesnt cout anything. The program just crashes upon execution. First, it asks me the amount of students i want to handle. I enter '1'. Then it asks me if i want to read in from external file and i enter 'Y'. then the exe just crashes
#include <iostream>
#include <cstddef>
#include <cstdlib>
[Code]......
View 3 Replies
View Related
Mar 14, 2013
After asking the user to input 2 values i expect my program to read them and then output whether they are equal, bigger or smaller than one another. However i am getting no output what so ever when i input the values
code below:
#include <iostream>
#include <cmath>
#include <cstring>
#include <string>
#include <string.h>
using namespace std;
int intInput1, intInput2;
float floatInput1, floatInput2;
int x, n;
[Code] .....
View 1 Replies
View Related
Dec 1, 2014
Debug build links fine but release build linking hangs at "code generation"
If I turn off whole optimization, it actually works fine, but I do need whole optimization.
View 1 Replies
View Related
May 24, 2014
My whole code is working but when the results are sent to my phone only the temperature value is reading correct the light value is all jungled up and moisture and pressure values are reading as 0.
Code:
#include "taskFlyport.h"
#include "grovelib.h"
#include "barometer.h"
#include <string.h>
extern BOOL incomingSMS;
extern int incomingIndexSMS;
extern BYTE incomingMemSMS;
[Code]...
View 4 Replies
View Related
May 26, 2014
I am only receiving the correct temperature value. The other 3 values are reading wrong. My format string isent matching the variable list. What I need to do.
float data_bar = 0.0;
float data = 0.0;
float anVal = 0.0;
float moistureVal = 0.0;
while(1) {
// Get the new value using the get() function
[Code] ....
View 3 Replies
View Related
Dec 11, 2014
I have written in a binary file using fstream an using sort value.
unsigned shortwidth=50,height=50;
file.write((char*)&width,sizeof(width));
file.write((char*)&height,sizeof(height));
When i try to read it back from fstream again there are some symbols (binary obviously). How can i get my values back? I want to read those symbols and in a way to convert them to my old width and height values.
View 6 Replies
View Related
Apr 22, 2012
Ok I'm trying to create matrix of data that I can add values to based on a reading that I will get from a DVM. I'm using a 3d vector to do this. I need to keep track of the serial number, the day and within day I need to take two readings at different temps, this will continue for 7 days.
The rows of my 3d vector will be the days, the colums will be the serial numbers the depth will be the reading at the different temps.
What I need to do is compare the first element (days) and when it is greater then or equal to 4 I will perform calculations of the readings. So all I want to do is compare the first element of the vector, How do I do this?
Here is what I got
Code:
#include <vector>
typedef std::vector<double> Double1D;
typedef std::vector<Double1D> Double2D;
typedef std::vector<Double2D> Double3D;
#define HEIGHT 5
#define WIDTH 3
[Code]....
View 7 Replies
View Related
Jul 31, 2013
I just got a job programming a windows application. One of the requirements is reading and writing values from an excel spreadsheet. Looking online, it appears that C++ isn't the best (one of the worst?) languages for reading and writing values from excel files. Now the language I'm most familiar with is C++ and I've been looking at C#, and it appears to be much easier to read excel files.
View 8 Replies
View Related
