I have designed a code and still i dont get the desired output ....
#include <iostream>
using namespace std;
int fact(int,int);
int arr[200]={1};
int main() {
int n,t,len=0,i=0,j,a;
cin>>t;
[Code] ....
Code:
#include <stdio.h>
int find_next_prime(int num);
int is_prime(int num);
int main()
[Code]......
How would I go about counting the number of times a factorial has a specific prime number?
For example, 5! = (2^3)*(3^1)*(5^1), 6! = (2^4)*(3^2)*(5^1).
How would I begin to design my find_prime_count function in order to count how many times each occurs? My program is to read in a number between (2<=N<=100) from a text file and output the results exactly like above which I still have to figure out after, I'll assume I have to use fscanf.
I have been working on a program to calculate the factorial of numbers. Part of my code is copied and modified from the FAQ about validating numbers in user input.
I have encountered a problem with the for loop that I am using near the end of my code. No matter what I do, it seems that my loop only does the multiplication of b = a*(a-1) and then prints. For example, inputting 5 will result in a print of 20, but the factorial is 120.
Code:
int main(void) {
char buf[BUFSIZ];
char *p;
long int a;
long int b;
long int i;
printf ("Enter a number to be factorialized: ");
[Code] ....
I have to make a function that can add two numbers of any size. So far I have:
#include <iostream>
#include <string>
struct number {
[Code]....
why I'm getting a segmentation fault? It's really dense because of all the conversions I had to do.
My code handles smaller numbers well enough, but I need the program to be able at least factor 100!.
#include <stdio.h>
void factorialOutput(unsigned int &n, int fac[]);
unsigned long long factorial(int n);
int main(int argc, const char * argv[]) {
unsigned int t = 0;
int n[101];
[Code] ......
I have a very large number in word ~6million digits long
I wish to make a program to check if it is prime.
Exmaple:
112121276783621784678236478236478623784672364782367846237846782364782367846238 + 783627846782364786237846782364782367846237846782364782367846237846237864782367846238
It should be efficient and fast. It is useful to calculate the Factorial 100000, and then I calculate the number of the module.
Example:
132142344564378657834657834657863785634786578346578346785634785678653478 % 124623874
If i m writing a code for a program to solve factorials, what is the best approach if i have large numbers in mind?
If i use int, i can only go upto 4bytes and if i use double i can go upto 8bytes. so should i create new type or is there any other way to get this done.
I have to write a program, that multplicates very large numbers (out of range of long int). It's said that i need to use arrays and read the numbers as strings. My problem is to end function called "mnoz:, because i don't know how to sum the multiplicated values of arrays a and b.
Code:
#include<stdio.h>
#include<math.h>
#include<stdlib.h>
#include "winbgi2.h"
#include<string.h>
#define roz 10000
char lan(char a[])
[Code] ......
Why this class doesn't work for Subtraction, Division and Square Root. When I try to get results for Subtraction, it output right answer, but with any trash. And When I try to get answer for Division and Square Root, it just brakes and don't output anything. For Addition and Multiplication class work correctly.
Its the link to this class [URL]
I'm programming an app that deals with large numbers. I have a do-while loop that I want to execute. I can not get it to work. The "while(d!=1)" part is the problem and I can not find a way around.
Code:
#include "stdafx.h"
#include <stdio.h>
#include <gmp.h>
#pragma comment(lib, "gmp.lib")
int main (int argc, char *argv[]) {
mpz_t d;
[Code] ....
I get errors:
1.error C2446: '!=' : no conversion from 'const int' to '__mpz_struct *'
Conversion from integral type to pointer type requires reinterpret_cast, C-style cast or function-style cast
2. '!=' : '__mpz_struct [1]' differs in levels of indirection from 'const int'
I tried to sort a large numbers of vector of random integers with std::sort(), but when the number increases over 10M, std::sort returns all zero in values. Does std::sort have a limitation of input numbers?
View 1 Replies View RelatedI am working on a program which creates a large pointer array of numbers and then performs several iterations of operations in them.
Code:
int * u = new int[N];
double * nu = new double[N];
int * nud = new int[N];
for (int i=0;i<M;i++){
for (int i=0;i<N;i++){
u[i]=0;
nu[i]=0;
[Code]...
If M is small enough then there are no problems in the program. However once M is large enough I get the "unhanded exception":
std::bad_alloc at memory location 0x0026f728..
Since I am just reusing the same arrays, and since I am able to make it through a few iterations, I didn't think it could be a memory issue. If it is, is there a way I can clear the data completely after each iteration?
What I'm trying to do is make a calculator that takes two large numbers in a linked list then ask the user if they wish to add them or subtract them.
#include<iostream>
#include<string>
using namespace std;
class Node {
public:
int value;
Node * next;
[Code] ....
I need to write a complete program using "While Loop" to calculate 1! to 12! using just "int" variables. Only from 1 to 12 and there are no other inputs.. This is my first time using While loop.
View 2 Replies View RelatedThe code works and comes out with a correct factorial up to 69! (But this is fine I only need it to work up to 60). I was wondering if this could be simplified or optimized in any way.
Code:
#include <stdio.h>
int main(){
int number[100]; /*Created array of size 100 */
int n=34; /*19931120 summed to make 34 */
int i;
[Code].....
calculate the factorial with function
The program should then calculate the factorial of the number n, where n!= n×(n −1)...× 2×1
the output like this:
Enter number: 4
Factorial of 4! = 24
Enter number: 6
Factorial of 6! = 720
Enter number: 3
Factorial of 3! = 6
Enter number: 0
Factorial of 0! = 1
Enter number: -5
Factorial of -5! = -1
Press any key to continue . ....
int main() {
int x;
int y=1;
for(x=1 ; x<=12 ; x++ , y=y*x ) {
cout<<y<<'
';
}
}
This code give x! ( x factorial).
whenever ,in x<=12 , we change the 12 to any number n where n>=1 and n<=12
the code works and give the (x factorial)
for example 12!=479001600
the problem begins with the number 13.
when we put 13 like this x<=13 or for(x=1 ; x<=13 ; x++ , y=y*x )
the compiler gives a wrong result : it gives 1932053504 which is wrong because the true result is 6227020800
I put some checks in factorial program, I am confused how 27, 40 50 is coming in output and ans is 10.
#include<stdio.h>
int fact(int n) {
if(n==1) {
printf("hello1 %d
",n);
return 1;
[code].....
code of prime factorization. Example input:135 / The problem is I want to be an output of (3^3) (5^1) instead of 3,3,3,5.
here's the code:
#include <iostream>
#include <cstdlib>
#include <cmath>
using namespace std;
void get_divisors(int n);
[code]....
While running it gives the runtime error: "Extra parameter in call to factorial."
#include<iostream.h>
#include<conio.h>
int factorial(long int);
void main() {
clrscr();
long int a;
cout<<"This program displays the factorial of the number you enter."<<endl;
[Code] .....
double expression(int n, double x) {
double num=(pow((x),2*a));
double den=fact(n,a);
double sum=0;
for(int a=0; a>=0; a++)
sum=pow(x,n)*(num/den);
return sum;
}
I don't know why this isn't working. fact is a factorial function which I have tested and it works fine. But when I input, for example:
int main() {
cout<<expression(1,3)<<endl;
getch();
return 0;
}
it comes up with an error.
I'm trying to run a factorial program but I'm getting the error statement has not effect.
here's the code
#include <iostream>
using namespace std;
int main() {
int fac = 0;
int sum = 0;
[Code] ....
the error happened in the int main section
I wrote this code to find the factorial of any given function ., works fine but when i put it in a class... it gives me an error ::assignment of read only variable fact;
#include <iostream>
using namespace std;
const static int fact=1;
class My_Factorial {
public:
int x;
void Get_Number(){
cout<<"enter a number to find its factorial";
[Code] ....
I just want to practice in the language so i wrote this simple function that computes the factorial result of a certain number. The problem is that for all numbers > 20, the results are wrong ( < 20 all good).
I already learned that normal "long" type in c is more like 32 bit int and not 64 bit like a long type in java. so I used here a "long long" type.
why am I getting strange results above the number 20? isn't 64 bit enough to hold those numbers?
Code:
long long factorial(int n);
int main() {
long long result = factorial(20);
printf("%lld",result);
[code] ...
for 21 i get: -4249290049419214848
where the right result shoud be: 51,090,942,171,709,440,000
Write a C++ program that will input from the user a positive number n and find its factorial. Don’t forget to validate the input. The factorial of a positive integer n (denoted by n!) is defines as the product of the integers from 1 to n.
n! = 1* 2 * 3 * ... * (n - 1) * n
You should allow the user to continue working with your program for additional data sets.
Sample output:
Please enter a number: 5
5! = 120
Would you like to continue (Y/N)?Y
Please enter a number: 3
3! = 6
Would you like to continue (Y/N)?N
Good Bye!!
My code for what i think I'm doing is as follows:
#include <iostream>
using namespace std;
int main(){
int i=1;
int n;
[Code] ....