I want the input for the price in decimal format(15.00). If the input is in integer format then I want to convert it to decimal format.
The maximum price for a sale is 999.99 and minimum is 0.00.
I have tried so far:
Code:
#include<iostream>
using std::cout;
using std::cin;
void main(){
float eventPrice;
[Code] .....
A valid input will be:
1.8,
0.8,
0.00,
0,
9,
99
This code is near complete, the only task that is left is allowing the user to input a decimal and then two integers, or automatically using .00 decimal.
The automatic part: /*This is not correct.
printf(".%.2d
", number);
*/
But that does no good for me. Question: Do I have to create a some sort of while loop again, to allow the user to input a decimal followed by integer?
Code:
#include <iostream>
#include <cstdlib>
using namespace std;
int main() {
int j , i = 0, k = 0;
int number;
[code]....
Write a C++ program that adds three binary numbers of 8-bit each. Every number is stored into an array of 8 elements.
Example:
Array A
0 1 2 3 4 5 6 7
0 1 1 0 1 1 1 0
+
Array B
0 1 2 3 4 5 6 7
0 1 1 0 1 1 1 0
+
Array C
0 1 2 3 4 5 6 7
0 1 1 0 1 1 1 0
Store the result into an array D of 8 elements. Your program should show the decimal numbers for every binary number. Print screen of 6 answers. This means you should try your program six times with different numbers in every run and show the printed screen result.
How can I take in a path name like "C:myfolderfile.txt" where the user enters exactly that? I've tried putting the arg into a string, then looping through the string to find the '\', but by that time it is too late as c++ considers the '' as a escape character.
Is this even possible? I've googled it and everyone just says to make the user input the path with double \ or with a /.
I am trying to work on a C++ program to calculate the quadratic formula using input files and classes. I have written my class, but I am trying to find a way to take an input file with unknown number of lines of coefficients. How do I take each integer from each line and set that value as "a" and "b" and so forth, then start over on the next line?
This is what i have so far.
fstream inputfile;//users input quadratic coefficients file
ofstream outputfile;// outputs a file with solutions
int main(int argc, char *argv[])// argc is argument count, char *argv[] is array of array of characters for arguments {
string dataline;
getline(inputfile, dataline);
[code].....
I'm currently working on a program to take the user's input as DDDD.CC and then converting it to the least amount of coins using quarters, dimes, nickels, and pennies. I was told to not use any doubles or floats as they would produce errors. And supposed to the use the library function atoi() after I take the input user's amount as a string to convert it into an integer.
So far the string input has worked and it produced the right number of quarters but it leaves off the cents. For example, I put in 352.23 and it gives the right amount of quarters but leaves off the 23 cents.here's my code:
#include <iostream> // Allows the program to perform input and output
#include <stdlib.h> // Atoi
#include <string>
using namespace std ; // Enables a program to use all the names in any Standard C++ header
int main() // Start of program execution {
string line ;
[code]....
I'm trying to create a program that will take input from a user and calculate it in a do-while loop. The program does the calculation but the answer is wrong. The loop also doesn't work. The purpose of the program is to see how much an item will cost after a discount is taken off and tax is added.
#include <iostream>
#include <cmath>
using namespace std;
double original_cost;
double discount;
double tax;
double total;
char answer;
[Code]...
I have been trying to finish this code (function) for a while now, but am stuck on the last part. In this code, I prompt the user to select a number of integers and any number of digits and then find the smallest and largest value within these digits. On the next part, I am supposed to determine which of the given digits the smallest and largest are located such that the output should be:
Digit _ can be found in integer number(s): _, _
Here is what I have tried:
Code:
int digitSizeLoca() {
int userNumInteger;
int* iPtr;
int* iPtr2;
int* iPtr3;
int value;
[Code] ....
Seems to do the job, but it always outputs 1, 2...
I am stuck on an exercise where i am supposed to use a loop to take user input and keep a running sum until the user enters a 0. the code i have so far is:
#include <iostream>
int main() {
using namespace std;
int num;
int total = 0;
int x;
[Code] ....
The full text of the error message is: error c2678:binary'>>':no operator found which takes a left-hand operand of type 'std::istream' . and one more thing i was wondering, is there a difference between c++ and visual c++?
I have to write a program where the user will input integer numbers. How many numbers they enter is unknown, therefor you should use a repetition structure for the input. When the user is done, they will enter -1 to exit.
Create a dynamic array if the size=2( the initial size must be 2) Repeat until user enters -1.
I have to do this without using vectors.
This is what i have, I cannot figure out what to put in main. I was thinking of a do-while?
Code:
#include <iostream>
using namespace std;
void resize(int *[], int);
int main() {
int *listDyn;
int size=2;
[code].....
The following program takes user input into two arrays and should then determine how many items are different by comparing them with a loop. The comparison always show zero correct answers.
#include <iostream>
using namespace std;
const int QUESTION = 20;
//class for testing grades
class TestGrader {
[Code] ....
Very new to programming, and I know that there must be another way on inputting a string into each array cells not by just inputting it one by one, but as a whole. My code at the meantime is: [URL]
View 1 Replies View RelatedHow to get this thing to work. All i need to do is ask user to input a name and then it brings out the line from the .txt file containing the information.
For example in my case I'm doing a member search function I'm required to ask user to input the name of the customer and then print out all the details (which consumes 1 text line in the .txt file)
Here is the code, This is the write to text file method (100% working)
Code:
cout << "Customer Name: ";
cin >> name;
// ...
ofstream myfile("customer.txt", ios::app);
[Code] .....
I need the user to be able to input the number of decimal places they wish to have displayed in the output. Everything works fine as is, I just don't know how to allow for the user to input the number of decimal places they want the output to have.
Code:
#include<stdio.h>
#include<math.h>
#define PI 3.141592654
int main(void) {
//Local Declarations
int x; //desired number of decimal places
float radius; //radius of circle
float circumference; //circumference of circle
[Code] .....
Create a program that will ask the user to enter a decimal value (1-999999) then display its corresponding binary numbers. Repeat this process until the value entered is equal to 0. Use the following Function Prototype:
void BinCodes(int value);
Sample Input/Output:
Enter a Decimal: 35
Binary: 100011
Enter a Decimal: 184
Binary: 10111000
Enter a Decimal: 0
I am learning c because I want to get back into programming microcontrollers, which I previously did in assembly. I wanted to make something fairly tight in terms of program memory and RAM to show me an output in binary form. When you are troubleshooting a file register or serial interface when you can see the actual bit values (on a small LCD for a micro-controller) and compare it to a datasheet.
Code:
#include <stdio.h>
#include <math.h>
int main() {
int i;
int decimaltoconvert;
int convertingarray[7];
int convertingarray2[7];
[Code] .....
Also, how might I go about putting that into a function that I could call?
Write a C++ application program to accept a signed decimal integer as input and output the equivalent 2s complement version in 16-bit binary. Include a space between every four bits in the output string. The input will only be processed by the application if it falls in the valid range that can be represented in 2s complement format with 16 bits. The range of a decimal number from - to + is -32768 to 32767.
View 3 Replies View RelatedI am making program that allows the user to determine how big the array size will be and then asks the user to make up numbers to fill the array. Every time run the program on Dev C++ it says "program has stopped working"
Heres My Code:
//Assignment 19 Program 2
#include <iostream>
using namespace std;
int main()
[Code].....
I'm trying to figure out why the binary to decimal part is not working correctly when the binary value finishes with a 1. In those cases, the decimal value shown in one unit smaller than it should be.
Code:
#include <iostream>
#include <cstdio>
#include <cstdlib>
using namespace std;
void Binary_to_Decimal(), Decimal_to_Binary(); //prototype for the 2 functions that contain the converters
int main() //the menu {
int a_Choice;
cout << "Enter 1 - for binary to decimal" << endl;
cout << "Enter 2 - for decimal to binary" << endl;
[code]....
This program compiles, but has a bunch of logical errors. I know my problem is somewhere in the while loop that I have, but I can't figure out where. Here are some of the issues I am experiencing:
1. At the beginning of the program it asks you to enter a number, and when you do it does nothing while proceeding to the while loop where I have it asking the same question
Code:
"Please enter a number between 1 and 20 (Enter 0 to stop)
";
cin >> num;
cout << endl;
I want to be able to eliminate that first statement but if I only run this in the loop without the above statement the program will display nothing on the screen and proceeds to stop.
2. This code runs fine, except that if you make a mistake, it will prompt you to enter a valid number, however; it ignores your first response if the number you enter is valid and asks you to enter a valid number anyway. Once you enter it a second time, it will accept it and the program will continue on.
Code:
while(num != SENTINEL) {
cout << "Please enter a number between 1 and 20 (Enter 0 to stop) ";
cin >> num;
cout << endl;
Also if you type in 0 on your first response, it will prompt you that it is not a valid number and ask you to try again, instead of stopping the program like it is supposed to do. On your second response the program will accept your 0 and stop the program correctly.
//Write a program that displays the roman numeral equivalent of any decimal number between 1 and 20 that the user enters. The roman numerals should be stored in an array of strings and the decimal number that the user enters should be used to locate the array element holding the roman numeral equivalent. The program should have a loop that allows the user to continue entering numbers until an end sentinel of 0 is entered.
Input validation: Do not accept scores less than 0 or greater than 20
#include <iostream>
#include <string>
using namespace std;
int main() {
// Declare constants and variables
const int romanNum = 21; // Size of the elements in the array
[Code] ....
I need to write a code in c++ , to input decimal number and the output to be number in Scientific notation with 32 bits .
View 1 Replies View RelatedI've read up on .bmp files on wikipedia and am currently attempting to make a function that can export a .bmp file of the screen of my programs. I've already begun work on it but it isn't working. The code I have so far is:
typedef char Byte;
typedef int Byte4;
typedef short Byte2;
struct BMP_Header {
[Code] ....
My problems are that when less then the required amount of bytes is needed to store a value in the file, the 00 bytes are skipped (Ex. The file will contain 42 instead of 42 00 00 00), and the Pixels are stored as nothing but 0D ( every value intended for storing pixel data is 0D ).
I decided to code my own GUI menu. getting to another page from a button click. I have added the event handler I think (click="Button_click") then in the event handler I have added this:
private void Button_Click(object sender, System.EventArgs e);
}
Response.Redirect("Login.xaml");
}
After researching it says either to use
Response.Redirect("Login.xaml");
OR
Server.Transfer("Login.xaml");
Neither of these work, underlining "Response" and "Server" as an error saying "A namespace cannot directly contain members such as fields or methods."
NOTE: MY MAIN GUI PAGE IS CALLED "mainpage.xaml" THE CODE ABOVE IS STORED IN THE "mainpage.xaml.cs" THIS MIGHT BE RIGHT OR WRONG BUT I'M NOT SURE SO I AM LEAVING SOME EXTRA INFO!
I have created this code; it is a taxi management system. I've made a class 'List' which handle a linked list structure of the waiting taxis and waiting passengers. The class has a public int variable: waiting, which keeps track of the number of waiting taxis/passengers.
#include<iostream>
using namespace std;
class Queue{ //Class for indivdual taxis and passengers, which will be members of linked list.
public:
string id;
Queue *next;
Queue (){
[Code] .....
But when I run the code and type in a new taxi number, the code does not increment the number of taxis by one the linked list by one. I can't seem to find the problem.
BTW, in the 'int main', I've added "<< taxi_list.waiting" at the end of the line after the user inputs the new taxi registration number, so that I can see how many taxis are now on the list. This is what is being shown as zero, no matter what.
Ok so I have a class that takes integer fractions and I want it to be able to take doubles also depending on what the user inputs. How would I go about this? I was thinking templates ...
View 7 Replies View RelatedI am again a bit confused with bool since we have not used them much. I understand it is suppose to return a true or false value that is represented by 0 and 1. so I have these two bool's
bool Triangle::isRight() {
if (pow(largestSide(), 2) == (pow(smallestSide(), 2) + (pow(middleSide(), 2)))) {
return true;
} else {
return false;
[Code] ....
and then I cout to display them
cout << "Is this a right triangle: " << t2.isRight() << endl;
cout << "is this a Triangle: " << t2.isTriangle() << endl;
and i get this
"Is this a right triangle: " 0
"Is this a triangle: " 1
Which i know is correct but I want to replace the 1 and 0 with my own string but the things iv tried tweaking with has not worked.
Also in the file attached has some requirements from my teacher but i was confused at the second last one, --- bool isEqual(Triangle &other) and it says return true if triangles are equal and false if triangles are not.
I dont know if this is just simply if one triangle equals another (however you determine that) or if its for the two bool's, isTriangle() and isRight() or what.
Attached image(s)