I am forking 3 times in a loop like this but the variable "count" does not increment, it stays on '1' and therefore this is an infinite loop, and this simple thing dont make sense to me.
I have checked so that the pointer address is the correct one every loop.
Code:
void increase(int* x) {
*x += 1;
}
main() {
int pid, i, number = 0;
[Code] .....
So I have been given and as part of the solution I need to count the number of digits in a long long variable. To do this I use a while loop, but it is behaving strangely. Here is the code.
#include <stdio.h>
#include <cs50.h>
#include <math.h>
int main (void) {
printf("What is the card number?");
long long card = GetLongLong();
if(card <= 0)
[Code] .....
When I execute the program it asked for the number, but then nothing happens. Of course, my first instinct was that the program was caught in an infinite loop somehow, but could not figure out how. I commented out the while loop and the program completed (albeit returning the incorrect value), so I was further convinced that there was an infinite loop that I was not seeing. I ran the program throug gdb. Strangely, the program did not loop infinitely, instead it got to line 16 [while(card1 > 0] and then just stopped, it was not executing the next line of code at all.
I'm trying to increment the values in a vector, not the vector size, based on variable input. Basically I have a vector of size 10, and all of its values are initialized at zero. The program counts the frequency of numbers 0-9 in a four digit user input. This is what I have (I want it to work so badly but the compiler says that I'm using a pointer to a function used in arithmetic):
for (int i=0; i < num_slots; ++i) {
++guess_frequency[guess[i]];
}
I just want to know if you can increment values within a vector:
E.g.
change
0 0 0 0 0 0 0 0 0 0
to
1 0 0 0 2 0 0 1 0 0
In this program what i'm doing is to search for a number when the vector is in order, and count how many times that number appears, the problem is that count how many times the number does not appear, but when its appear the program stays in an "standby mode" and the cursor does not move.
int buscarNumOrdenado (int x [MAX]) //MAX is the define {
int num,d, LimiteInferior, LimiteSuperior,mitad;
d=0;
LimiteInferior = 0;
LimiteSuperior = MAX-1;
[Code] ....
I'm running a game online and designing a program to generate Enemy Stats. Basically, it's supposed to generate 25 numbers between 0 and 7(to represent 8 Attributes on a 25 Point Buy system) and count how many times each number shows up.
Here's what the code looks like:
Code:
#include <iostream>
#include <ctime>
#include <cstdlib>
using namespace std;
int Generate() {
int r= rand();
int s= r%7;
[Code] ....
And here's two outputs.
1: Code:
12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 12133089220 Stats[0]= 25 Stats[1]= 0 Stats[2]= 0 Stats[3]= 0 Stats[4]= 0 Stats[5]= 0 Stats[6]= 0 Stats[7]= 0 Stats[8]= 0 Disallowed system call: SYS_socketcall
2: Code:
14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 14787708434 Stats[0]= 0 Stats[1]= 0 Stats[2]= 0 Stats[3]= 0 Stats[4]= 25 Stats[5]= 0 Stats[6]= 0 Stats[7]= 0 Stats[8]= 0 Disallowed system call: SYS_socketcall
Note that the number does change, but only between runs.
I have two classes, one class requests another class to populate a vector with some data using getAvailableStreams() method:
vector<AutoRefPtr<ManifestStream> > availableStreams;
std::cout << "now asking for streams." << std::endl;
manifest->getAvailableStreams(&availableStreams);
std::cout << "got so many streams: " << availableStreams.size() << std::endl;
The other class passes another pre-populated vector back:
virtual RESULT getAvailableStreams(std::vector< AutoRefPtr<ManifestStream> >* availableStreams) {
availableStreams = static_cast<std::vector< AutoRefPtr<ManifestStream> >* >(myStreams); //myStreams contains 1 stream
I'm also adding a stream here directly just for testing purposes:
ManifestStream stream2;
availableStreams->push_back(AutoRefPtr<ManifestStream>(&stream2));
std::cout << "calling getAvailableStreams. Giving so many streams: " << myStreams->size() << ", " <<
availableStreams->size() << std::endl;
return result_OK;
}
If I run the code, I can see the following logs:
Now asking for streams. Calling getAvailableStreams.
Giving so many streams: 2, 2
got so many streams: 0
Why am I getting 0 streams when I exist the method? I just had 2 streams in availableStreams while I was inside the method, where have they disappeared?
The following fuction from a class is supposed to count the number less then the average of all number combined. but it does not do that, now the fun part if you change it to count the number greater then the average it works great.
void IntegerArray::countBelowAverage() {
avrg=calcAverage(avg);
int count=0;
for(int x=0; x<100; x++) {
if (list[x]<avrg)
[Code]...
How do i get this to post in the proper format?
4.1 Write a program that will count from 1 to 12 and print the count, and its square, for each count.
4.2 Write a program that counts from 1 to 12 and prints the count and its inversion to 5 decimal places for each count. This will require a floating point number.
4.3 Write a program that will count from 1 to 100 and print only those values between 32 and 39, one to a line. Use the incrementing operator for this program.
i am writing a program that accepts a decimal number from the user and convert it to binary numbers. After the conversion, i should count the number of 1's and 0's in the said binary number. I got upto converting and counting 1's using Brian Kernighan’s Algorithm. But, i can't seem to get it to count the number of 0's.
#include <iostream>
#include<bitset>
using namespace std;
int main() {
int num,count=0,Zero,count1 =0;
cout<<"Enter the number:";
cin>>num;
string binary;
[code].....
I am writing a program that counts the number of sentences in a string. I count the number of '.' '?' '!'. However, there are Mr. Mrs. PhD. Dr. .
int number_of_sentences = 0;
for(unsigned int i=0; i <= text.length()-1; i++){
if(text[i] == '.' || text[i] == '?' ||text[i] == '!'){
++number_of_sentences;
}
}
return number_of_sentences;
I was wondering how to limit error message to one only.
For example
cin.getline(stringname,7);
for(int i=0;i<size;i++){
if(strcmp(stringname, "hello")=0)
cout<<"Found!"<<endl;
else
cout<<"not found"<<endl;
}
not found
not found
.......
I want to get only once not found
#include <fstream>
#include <iostream>
#include <string>
[Code].....
When I try to run my program I get:
1>LINK : error LNK2001: unresolved external symbol _mainCRTStartup
1>C:UsersDocumentsVisual Studio 2010ProjectsCS 111Lab10Lab10DebugLab10.exe : fatal error LNK1120: 1 unresolved externals
What I'm trying to do is get my program to count the number of words in an inputted data file. I've attached the assignment directions
Attached File(s) : lab10_data_.zip (9.27K)
This shows any prime number between a and b and also counts them*/
#include <iostream>
using namespace std;
int main(){
int a;
int b;
[Code] .....
I want to count number of words from my textfile and then make the first word ToUpper and second word ToLower and do that for the rest of the textfile.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
namespace ConsoleApplication3 {
internal class Program {
private static void Main(string[] args) {
[Code] ....
I want know if the query returned zero rows or not.
Don't want to use count(*)
sql = "select * from TABLE where employeefirstname = @First order by EmploymentStatusDescription";
using (SqlCommand cmd = new SqlCommand(sql, conn)) {
cmd.Parameters.AddWithValue("@First", First);
reader = cmd.ExecuteReader();
} while (reader.Read())
Write a c++ program to count no of letters in a given line
Write a c++ program to calculate employee salary
validation : for the salary less than 5000
a. HRA IS 15% OF BASIC salary
b. DA is 35% of basic salary
for salary above 5000
a. HRA is 5% of basic salary
b. DA is 25% of basic salary
Below is the response XML my programmer is getting from business service -
<Data>
<Maintain>
<AssetList>
<AssetDetails>
<AssetDescriptor>
<ns1:ParentProductCat category="ABC">ABC</ns1:ParentProductCat
[code].....
In above XMl if you check the ParentProductCat is prefixed with ns1:,ns2:,ns3:....
My XSLT code only checkes for the ParentProductCat but since it is prefixed with "ns*:" (* is integer) it fails to find it. So that in C# code replace function is used to replace ns*: a for loop is used for this and it goes until 1000
But now my response crossed the 1000 mark and this time the XML contains total 14500 lines.So I want to replace all ns:*
For this I want to count the number of lines present in the XML so that the for loop will run until that line number. how to do that?
write a program that counts the number of digits in a file?
For example the file contains:
5 6 7 -8 9obvsefs
6 7 8i uhbnm
8 8
And the program returns: "The number of all digits is 10"
the text file looks like: one hello hi twenty-five billion fifty maths three thousand and two
output: count the number of text numbers: 4
I wrote a function to count the number of characters in a string. Curious as to why I have to return x-1 and why x isn't the number of characters.
Code:
int count(char *string){
55 int x = 0;
56 char *p;
57 p = string;
58
[Code] .....
How we will write a program that will count a number of notes. I mean if i have 5676 rupees and i want to find the number of 5 thousand pak currency ,the number of 1000 notes, the number of 500 notes and the number of 100 notes. How we design such a program of if rlse structure to perform the above task.
View 1 Replies View Related#include <iostream>
using namespace std;
int main() {
int h;
double A[10][10];
[Code] .....
So I have a template, part of a larger code, that is designed to calculate the number of multiplications it took to reach a certain number. The problem is, whenever I execute the program, mults is always printing out a strange number, perhaps its actual address.
template <class T>
T power3(T x, unsigned int n, unsigned int& mults) {
if (n == 0) return 1;
if (n == 1) return x;
if (n == 2){
[Code] ....
How can i count the total no of unique elements in an array? Like I have an array.
Code:
int array[]= { 2,1,4,0,3,3,0,0,1,2,1,1}
// As it has 0,1,2,3,4 as unique values so total no of unique values are=5
int unique =5;
I've been currently stuck on a C++ problem. Here's the question:
Write a program that generates one hundred random integers between 0 and 9 and displays the count for each number. (Hint: Use rand()
% 10 to generate a random integer between 0 and 9. Use an array of ten integers, say counts, to store the counts for the number of O's, l 's, . .. , 9's.)
I think I'm pretty close, but I keep on getting "0" for the occurrences (or counts) of each random integer.
#include <iostream>
#include <cstdlib>
#include <ctime>
#include <conio.h>
#include <fstream>
using namespace std;
const int SIZE = 100;
[Code] .....
I try to use "rand" to create 100 string, I'm happy I succeed, but next step i wanna know how to count each number of letters and the frequency it shows.
Here is the code:
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <iostream>
// using namespace std;
int main() {
const char *c = "abcdefghijklmnopqrstuvwxyz";
[Code] ......
