how do i code my stuff in order to read the following data into array?
Assume in a text file.
content is:
<matrix>
rows = 2
cols = 2
[Code].....
following my code above..im still unable to read the matrix in the following file
I am having a structure called matrix as shown below to represent a matrix your read from a text file.
struct matrix
{
double mat[30][30]; //content of the matrix mat
int row; //number of row in the matrix mat
int col; ////number of col in the matrix mat
};
Declare 3 variables of structure matrix, m1, m2 and m3 in main to be used as describe below.
Task:
1.Write a function void readFile(char *filename, matrix *m) that will read a matrix from a text file and copy to the structure matrix m.
Basically I am to create a program that will read two saved text files; one is [2x4] ~ (matrixA.txt) and another is [4x2] ~ (matrixB.txt). The program is supposed to read both text files, multiply them, and generate an output that will be saved as ~ (matrixC.txt).
So here is my horrible attempt at it:
Code:
#include <stdio.h>
int main() {
FILE * fileA;
FILE * fileB;
FILE * fileC;
[Code] .....
And these are the compile errors...
C:UsersLeDerpHW1.c: In function `main':
HW1.c:27: parse error before `int' //Line 28
C:UsersLeDerpHW1.c: At top level:
HW1.c:34: warning: parameter names (without types) in function declaration //35
HW1.c:34: warning: data definition has no type or storage class //35
HW1.c:35: parse error before `for' //37
[Code] .....
i want to know how i can solve this question? do i need to create a class or write the program codes.
View 12 Replies View RelatedI just want to know the code of the program: Write code to accept matrix as aurgument and display its multiplication matrix which return its multiplication matrix.
View 1 Replies View RelatedI want to read the contents of a file block (512 bytes) by block using low I/O read statements. Each record is 64 bytes long and has a pre-defined structure. The first 4 bytes are an unsigned integer; the next 20 bytes are ascii text, etc.
I have a buffer which I can access with buf[0] to buf[63] to read the first record and then buf[64] to buf[127] for the second, etc. However, I was wondering how to map a record so that I can refer to an integer as an integer and a float as float, etc. I can't create a struct and move the 64 bytes to it, as I will have alllignment/padding problems.
What is the standard way to deal with records in C?
I want to assign a matrix to submatrix of a bigger matrix.
ublas::matrix<int> A(8,5);
ublas::matrix<int> B(2,5);
for(size_t i=0;i<A.size1();++i)
for(size_t j=0;j<A.size2();++j)
A(i,j)=i*A.size2()+j+1;
for(size_t i=0;i<B.size1();++i)
for(size_t j=0;j<B.size2();++j)
B(i,j)=i*B.size2()+j+5;
ublas::matrix_range<ublas::matrix<int> > a(A,ublas::range(0,2),ublas::range(0,5));
a=B;
and it works.
but if the matrix is compressed_matrix type, there's something with it. the error log as below:
Check failed in file boost_1_48_0/boost/numeric/ublas/detail/matrix_assign.hpp at line 1078:
detail::expression_type_check (m, cm)
terminate called after throwing an instance of 'boost::numeric::ublas::external_logic'
what(): external logic
Aborted
I'm not sure this is a bug or not.
I'm working on a project for my son. I want to imitate the code for the matrix in CMD using a .bat file.
~note: this is an example of whats going on, not the whole code
:start
@set /a bottomlimit = 0
@set /a upperlimit = 2
@set /a result1 = %bottomlimit% + %random% %% (%upperlimit% - %bottomlimit% + 1)
if %result1% == "2" set /a result1 = " " <- this is the part that is messing up, it doesnt change the 2 to a blank space and keeps echoing as 2
echo %result1%
I have written code that saves a matrix to a utf-8 file. This code works just fine when invoked from a win32 console app, but if I attempt to use the exact same code by invoking it within a SDI Doc/View Serialize(CArchive& ar), if(ar.IsStoring), it fails, but in a somewhat unusual manner. Namely, the file shows up in the designated directory, but it is an empty file (0 bytes), and the 'Unable to open file' message is seen in Debug config. Note that both the win32 console app and the SDI app are both using a Unicode character set, however, only the SDI app uses the method inside a Serialize(CArchive& ar) method, whereas the win32 console app evokes the save method directly from within _tmain. Why this seemingly illogical disparity occurs.
Here's the template code I have used in innumerable applications to save matrices to a disk file.
Code:
namespace TNT {
// saves a TNT double matrix, discriminating between real and complex matrices by virtue of the respective file markers, 'MATCALC94R' and 'MATCALC94C'.
template <class T>
void SaveRealBMatrix(const Matrix<T> &M, string sfilename) {
_RPT0(0, "SaveRealBMatrix:
");
_RPT1(0, "sfilename =: |%s|
[Code] ....
Here's the code from the SDI document Serialize(CArchive& ar) that fails as described above. Note that m_M is a class member TNT::Matrix<double> m_M that has been verified to exist in the Serialize method.
Code:
void CMyWndDoc::Serialize(CArchive& ar) {
if (ar.IsStoring()) {
CString csFileName = ar.m_strFileName;
wstring ws = csFileName.GetBuffer(0);
string s(ws.begin(), ws.end());
[Code] .....
Code:
#include <iostream>
#include <istream>
#include <fstream>
#include <vector>
[Code]....
Why is it reading in nothing for the arrays, and also making the size of the total thing the total number of numbers? It should have a size of 2, not 5.
I am trying to create a random 3x3 matrix and print it out in a text file using basic functions. My code below will not compile.
#include <iostream>
#include <cstdlib>
#include <ctime>
using namespace std;
//nxn Matrix = 3x3
const int ROWS = 3;
const int COLS = 3;
[Code] .....
I need to write a widget that will implement some matrix functions using data from a text file. The input data will be spreadsheet like and fully determined with complete rows and columns. I need to do the following,
1. populate a data structure with the input data (double) to create matrix x
2. transpose the input data matrix x to create x'
3. multiply x * x' to create a square matrix x'x
4. take the determinant of x'x
This is pretty standard linear algebra, but not something I have done in cpp before. Implementation such as the best data types to use to store each of the three matrices, how they are sized, and what library functions may be available for the matrix functions like transpose, multiply, determinant, etc.
I will be removing each data row from the initial input to observe the effect on the determinant in case that has any effect on program design.
I have to prepare a project. But I don t know how can I do this. Program will find a matrix P for a square matrix A such that P^-1 A P ....
View 15 Replies View RelatedThe Objective Of This Program Is To Create A File To Write Text And Read Back The File Content. To Do That I Have Made Two Function writeFile() To Write And readFile() To Read.The readFile() function works just fine but writeFile() doesn't.
How writeFile() function Works? when writeFile() function Execute It Takes Characters User Type And When Hit Enter(ASC|| 10) It Ask "More?(Y/N)" That Means What User Want? Want To Go Next Line Or End Input?
If "Y" Than Inputs Are Taken From Next Line Else Input Ends.
But The Problem Is When Program Encounters ch==10 It Shows "More?(Y/N)" And Takes Input In cmd variable.If cmd=='Y' I Mean More From Next Line Than It Should Execute Scanf Again To Take ch I Mean User Input.But Its Not!!! Its Always Showing "More?(Y/N)" Again And Again Like A Loop.
Code:
#include <stdio.h>
void writeFile(void);
void readFile(void);
int main(){
[Code].....
I am writing a simple file/text parser to read a config file for some code I am working on. It's dead simple and not particularly smart but it should get the job done. The code reads a config file:
Code:
readlength=2500000
start=0
finish=25000000
cutoff=20000
samplingfreq=250000
poles=10
filterpadding=500
}
[code]....
Here is where it gets wierd. You'll notice that there is an unused variable (filepath) in the config struct. This variable is not referenced or used anywhere in the code, ever. Yet if I comment out the declaration of char filepath[1024], the code segfaults partway through the read_config() function.
My best guess is that there is a buffer overflow elsewhere and it just so happens that the memory allocated for filepath happened to be there to catch it up until now, but I can't work out where it might be happening. With the declaration commented out, the read_config() function gets as far as reading the "padding" variable before it crashes. Yet when the declaration is there, then all the variabled are read correctly and everything seems to work.
Code:
#include <stdio.h>
#include <stdlib.h>
int main (int argc, char *argv[])
{
char buffer[256];
FILE * myfile;
myfile = fopen("read.txt","r");
[Code]...
I also got an error in printing wherein the data in read.txt is "Hello" newline "World" and my program prints world twice.
I have a .txt file which I want to read from and then write a new text file, this time with sorted lines. It is easy to sort one value, but what about sorting entire lines based on one value?
I want to sort the lines based on the FIRST value.
Example text file contents:
values;data
5.01 100
2.9 342
2.69 43534
10.1 43
6.8 45324
Output: Text file containing
2.69 43534
2.9 342
5.01 100
6.8 45324
10.1 43
It's easy to do this if there was only 1 number on each line, but I do I sort all the lines based on the first number in each line?
I have code that reads an input file and generates an output file .For reading the input file we have a xml file.If there is an error while reading or writing the output file the an errored file is generated. But in the errrored file the fields are not coming as in accordance with the reader xml . They are coming randomly . In the module for reading and writing the errored file list is being used . What should be done to write in the errored file as the reader xml fields.
View 1 Replies View RelatedI've written a program to read inputs in a text file. The file named Input.txt contain integers 2 3 and 4. My program is as follows:
#include<iostream>
#include<cstdlib>
#include<fstream>
using namespace std;
int main (){
int x,y,z;
[Code] ....
the program is outputing x=2293616 , y=0 and z=0 instead of x=2, y=3 and z=4.
I wrote the below code to find the line with "abc" as my parameter to strTosearch. I expected to the line 1st line but, this function always match the 2nd line. What am I missing here?
I wanted "found" to be "abc def hgi SSS".
Code in main()
String found=GetstringColSamLine("mytext.txt", "abc");
File name - mytext.txt
abc def hgi SSS
abc ppp yyy
string GetstringColSamLine(string routerFileName, string strTosearch)
[Code] ....
I am trying to get the code to read from the txt file one bite at a time and then write this bite into the binary file but i cant seem to get it working.
FILE *fpcust, *fpcustbin; //<<<<<-----point to both sales and customers text files, and the new .bin files for both
char buffer;
int ch;
int ch1;
fpcust = fopen("c:customers.txt", "r"); //<<<<-----pointing to the file
fpcustbin = fopen("c:customers.bin", "wb"); //<<<<<-----pointing to the new binary file, opening in writing binary
[Code]...
How to save the struct to file and then read it back from the file ?
Code:
#include <conio.h>
#include <stdio.h>
struct student {
int person;
int egn;
float AvergeGrade;
[Code] ....
Have average grade: %f", person[i].FirstName, person[i].LastName, person[i].egn, person[i].AvergeGrade);
}
//Save to file
getch ();
}
I have code that reads an input file and generates an output file .For reading the input file we have a xml file.If there is an error while reading or writing the output file the an errored file is generated. But in the errrored file the fields are not coming as in accordance with the reader xml .they are coming randomly . In the module for reading and writing the errored file list is being used . What should be done to write in the errored file as the reader xml fields.
View 1 Replies View RelatedI know this is how you read from a file. I also want to print my output to the same name of the file plus ".txt". So if my file is called "text" I want to print it to a file called "text.txt".
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
[Code]....
Would it be something like this? Is it better to use "a" or "w" in the fopen? I want to write to it several times.
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
[Code].....
I have to read 2 arrays, put them in a file. Then make a 2nd program, read the data from the file and show the 2 arrays. I believe I have fully completed the first program, but I am still working on the 2nd one. On the 2nd one I am trying to create a function that displays the data from the file.
//first part
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
const int num_stores = 3;
const int col = 4;
const int size=4;
void showData( const string[], const int[][col], int size );
[code]....
I need to find inverse of a matrix data in binary file should be used to form matrix.its not finding inverse correctly rest is working good.
Code:
#include <stdio.h>
void createbin();
void display();
void inverse();
int main()
{
createbin();
display();
inverse();
[Code] ....