I nead to write a program that convert an octal number to decimal number, I thought I did it right but it doesn't work.. I have to use in the first for loop as it is because it is part of the instructions (student homework).
#include <iostream>
#include <math.h>
using namespace std;
void main() {
double numOfDig, num, newNum;
[Code] ....
I need to create a generic function that changes from any starting base, to any final base. I have everything down, except my original function took (and takes) an int value for the number that it converts to another base. I decided to just overload the function. I am Ok with changing between every base, but am slightly off when using my new function to take in a string hex value.
The code below should output 1235 for both functions. It does for the first one, but for the second, I am currently getting 1347. Decimal to Hex works fine - It's just the overloaded function (Hex to anything else) that is slightly off.
#include <iostream>
#include <stack>
#include <string>
#include <cmath>
using namespace std;
void switchBasesFunction(stack<int> & myStack, int startBase, int finalBase, int num);
void switchBasesFunction(stack<int> & myStack, int startBase, int finalBase, string s);
[Code] .....
Code: Complete the program below which converts a binary number into a decimal number. Sample outputs are shown belowComplete the program below which converts a binary number into a decimal number. Sample outputs are shown below.
Sample Output 1:
8-bit Binary Number => 11111111
Decimal Number = 255
Sample Output 2:
8-bit Binary Number => 10101010
Decimal Number = 170
Sample Output 3:
8-bit Binary Number => 101010102
Number entered is not a binary number
#include <iostream>
using namespace std;
int main()
{
int num;
[code]....
#include "stdio.h"
#include <stdarg.h>
#include <math.h>
// Main Function
int main(void){
int number;
printf(" Please enter a number from 1-10? ");
scanf("%d", &number);
[Code] ....
I took the while statement out didn't want that in there.
Here's the part of the codes where I tried to use boolean expression:
Code:
#include <iostream>
using namespace std;
int main() {
int num;
cout << "8-bit Binary Number=";
cin >> num;
[Code] .....
How can I get started with the body?
Here's the part of the codes where I tried to use boolean expression:
#include <iostream>
using namespace std;
int main()
[Code].....
May I know that how can I get started with the body?
I want to convert a decimal number to binary and store it in a string so that I can use that binary output for later computation. Here is what I did
Code:
#include<stdio.h>
#include<stdlib.h>
#include<string.h>
void main()
[Code] ....
Now as you can see that all the binary output is in a[] but how do I get it into a string so that I can use something like printf("%s",string) and get the binary output ?
I'm trying to pass a decimal number to a function and convert it to binary and return it and print it out in main. But it prints out 1011 and then seg faults...not sure where it's tripping up
Code: int main(){
char* binNum = decToBin(25);
int i = 0;
while(binNum != NULL){
[Code].....
I tried to convert byte array with hex to equivalent decimal value as follows but it gives me unexpected results:
byte hex_arr[] = { 0x00, 0x01, 0xab, 0x90};
unsigned long i=0;
i = hex_arr[3] + (hex_arr[2] << 8) + (hex_arr[1] << 16) + (hex_arr[0] << 24);
the output is 4294945680
Correct output should be 109456
but when I try with byte hex_arr[]={0x00,0x00,0x0f,0xff};
it gives correct out put 4095
the correct output works until the hex values is {0x00,0x00,0x7f,0xff}
I'm a games/apps developer and right now I'm developing games/apps for iOS, Android and also PC / Facebook. I've also been working on C++ for some time but since I'm learning it all by myself, I still have some beginner doubts.
Is there any easy way to code a value conversion (for example an octal value to an actual number)?
Write a program in c++ to accept a number and convert this number into binary or hexa decimal or octal number according to the user choice using the concept of array.
View 6 Replies View RelatedYou enter decimal number into the program and what base you want. The integer part of the decimal is being handled fine, but the decimal is not.
For example, I enter 15.6847 and base 10, which means I'm going from base 10 to base 10. It spits out 68469999999999 for the decimal part. (Do not worry about the first block of numbers. The second block seperated from the first by a space is where the decimal will appear in order.)
#include <iostream>
#include <string>
#include <math.h>
using namespace std;
int baseConverter(int, int, int *, int *);
[Code] ....
How would you go about converting a decimal value to hex and then do math? Every example of converting decimal to hex that I have seen creates an array and I wouldn't be able to do math if I did that. Something like this.
15 decimal to hex F
17 decimal to hex 11
F hex + 11 hex = 20
I wanted to write a program to convert a number into a more readable format. It's like, if the input enters the number as 2361263 the output should be like 2,361,263. I went about this problem like extraction the number first and then if the count was equal to multiple of three i'd print ',' instead of the number.
But initially when i wrote the code for extracting a single digit from the number
Code:
#include<stdio.h>
void main() {
unsigned long long num=pow(2,50);
int count=0;
while(num!=0) {
int last_digit;
[Code]....
I know that I'd lose the number when i finish printing it, but still I only end up printing the entire number in reverse order.
As in if the input is 1234 the output is 4,321 which is not what i want.
One way of overcoming this problem is to store the values in an array and then reading then back from the end. But i wanted to know if there is a better solution than this? To extract the digits from the number in the same order as it is in the number
I had an exercise to convert from decimal to binary with base 2, it was simple simple i did the following:
Code:
#include <iostream>
#include <iomanip>
#include <cmath>
using namespace std;
void Conversion (int n);
[Code] .....
I then had an follow up exercise which was to replicate but for any base up to 10, i thought i would just have to replace 2 with a variable obtained from the user, however this did not work as i got an error saying too few arguments function but i cannot see why i am getting this.
Code:
#include <iostream>
#include <iomanip>
#include <cmath>
using namespace std;
float Conversion (int n, int b);
[Code] ......
The code should convert binary numbers to decimal but it doesn't..
Code:
#include <stdio.h>
#include <math.h>
#include <string.h>
int main()
{
[Code] ....
The goal of my program is to convert a decmial number to a binary number.First, the program gets an input to an array of chars, and the function translate_dec_bin converts this array to a decimal number through the strtoul function.The problem is that my program prints the binary number with an additional "0".For exmaple, for the input 1 - the program prints 01 instead of 1, for the input 3 - the program prints 011 instead of 11.
Code:
#include <stdio.h>
#include <stdlib.h>
#define MAX_LEN 20
void translate_dec_bin(char s[]){
char st[sizeof(unsigned)*20] = { 0 };
}
[code]....
What is the difference between the two functions below? I created the function in the top and my friend created the function in the bottom. I just want to know why the function with the while loop prints the binary numbers backwards. And the recursive function prints the binary numbers correctly.
void findBinary(int num) {
int remainder = 0;
while ( num > 0) {
remainder = num % 2;
cout << remainder;
num = num / 2;
[Code] .....
I have written this function.
void intToBase(unsigned int val,char *buff, unsigned int base) {
int digit = val%base;
if(val == 0)
return;
intToBase((val / base), buff + 1, base);
if(digit >= 0 && digit <= 9)
*buff = (digit + '0');
if(digit >= 10 && digit <= 15)
*buff = (digit + 'A' - 10);
}
This function is suppose to convert a decimal number (val) to any other base number and put it into a string (buff).
But the function puts the value in a opposite way, like if the answer is suppose to be "123" i get this "321".
Note: the function must be recursive and i can't use loops.
This was an exercise from a book (convert a character string into a floating point value). It seems to work with both negative and positive decimal numbers.
It basically get each digit from the string multiplies by 10 to hold the place, and then adds the next to the result, if that makes sense.
Then determines where the decimal and null character are to figure out what to multiply by (1/1000 or whatever) to determine where the decimal should go. The variable names dealing with this part of the program aren't accurate names right now.
My question is, the output, is always putting 6 zero's. So if the argument is .95, Ideally the output should say .95 and not .950000, even though the value is still correct.
I know there the %.2f to determine the amount of decimals, but the amount of decimals in these instances would be varying depending on the argument sent to the function.
So, if 600.158 was sent as an argument, only 3 decimals would be displayed, as opposed to two from the previous example. Is there a way to do this?
Code:
// Function to convert a string to an integer
#include <stdio.h>
double strToFloat (const char string[])
[Code].....
So I am trying to write a program that converts roman numerals into decimal numbers. I so far have come up with:
Code:
#include <stdio.h>
#include <ctype.h> // importing the tolowerfunction
//variables
int decimal, total;
char numeral[];
[Code] .....
But each time I compile it, it times out as if it were hitting an infinite loop. I have a feeling that I am not passing an individual character to the roman_to_decimal function but am unsure why.
I understand most of program below. Essentially, we have strings that we want to convert from hex values to decimal equivalents. We check if first two characters of string are 0x or 0X, which signifies hex format. If our hex string consists of solely digits like 0x25, then the processing is simple. We take the digit assign it to answer variable, and for each additional position in the hex base-16 system, we multiply the digit by 16.
Now if the hex string is something like 0x2A, then for 'A', the hexalpha_to_int() function is called, since we are able to find 'A' in the hexalpha string, we take the value of 'A', which is ascii 65 divide it by 2 and add 10 to it: 65/2+10=42.5. This doesn't make sense. What is the purpose of this logic right here: 10 + (i / 2).
Code:
#include <stdio.h>
#include <stdlib.h>
int hexalpha_to_int(int c){
char hexalpha[] = "aAbBcCdDeEfF";
[Code] ....
I need to write a code in c++ , to input decimal number and the output to be number in Scientific notation with 32 bits .
View 1 Replies View RelatedI am trying to make a program that will convert a list of binary numbers from a file into decimal and print the decimal to the screen. I have no problem doing the conversion, the problem comes up when our teacher wants the input file in a format as such:
3
10110101
11111111
10101010
The first number is supposed to tell the program how many different 8bit strings it is going to have to convert, and then the following lines are those binary numbers.
I am not very experienced with file inputs, and I know how to open files and read lines in.. The problem is, how to say "ok the first line says 3, so now I have to convert the next 3 lines" . I am assuming it is just a simple loop that I am missing....
I am very new to programming and have been working on a program that can receive decimals or binary numbers and convert them. The decimal --> binary works fine. For some reason I cannot figure out I cannot get the "BinaryToDecimal" function to perform. By putting a "printf" into the for-loop.
Code:
#include <stdio.h>#include <string.h>
#include <math.h>
char* ReverseString (char _result[]) {
int start, end, length = strlen(_result);
char swap;
for (start = 0, end = length-1; start < end; start++, end--)
[code]....
I have a code and am asked to modify it so that it will take as input as unsigned binary number up to 16 digits in length and convert it into its equivalent decimal number and output that decimal number.
All I know is that I use library function strlen() in <cstring> to calculate the length of the input string.
I also know I have to use something called pow(2,4);
//pow (); is found in cmath
I was told to use sum = sum >>16-l; (l is the length of />/>
#include <iostream>
using namespace std;
int main() {
[Code]....