C/C++ :: How To Convert Bytes Of Data To String
Jan 24, 2014How to convert bytes of data to string using c programming , I searched but i didnt get appropriate one .
Example : 112131(bytes) to string ("some sample")
ADVERTISEMENT
C++ :: Read Byte Of Char Data And Convert It Into Text String Of Binary Data That Represents Hex Value
Dec 26, 2013I am writing a program where I need to read a byte of char data and convert it into a text string of binary data that represents the hex value...
i.e. The char byte is 0x42 so I need a string that has 01000010 in it. I've written the following subroutine....
------------- My Subroutine ----------------------------------------------------------------------
void charbytetostring(char input, char *output){
int i, remainder;
char BASE=0x2;
int DIGITS=8;
char digitsArray[3] = "01";
[Code] ....
When I submitted the byte 0x42 to the subroutine, the subroutine returned to the output variable 01000010... Life is good.
The next byte that came in was 0x91. When I submit this to the subroutine I get garbage out.
I am using a debugger and stepped through the subroutine a line at a time. When I feed it 0x42 I get what I expect for all variables at all points in the execution.
When I submit 0x91 When the line remainder = input % BASE; gets executed the remainder variable gets set to 0xFFFF (I expected 1). Also, when the next line gets executed..
input = input / BASE; I get C9 where I expected to get 48.
My question is, are there data limits on what can be used with the mod (%) operator? Or am I doing something more fundamentally incorrect?
C++ :: How To Convert Bytes To ASCII
Feb 7, 2014How can I convert bytes to ASCII?, I read wikipedia about UTF-8 and I understood a little bit about add or split bytes to change the value.
Now I have those bytes
0xC7 0xE6 0xC2 0x91 0x93 0x7B 0xCE 0x01
And I found a program (DCode) that convert to 64 bits little-endian, supposedly those bytes in ASCII is this.
lun, 08 julio 2013 04:28:17 UTC <---
C :: Program To Convert Bits To Bytes
May 13, 2013I made this program to convert bits to bytes, because I'm so sick of seeing ISP's advertise speeds in megabits, which I consider an intentional attempt to decieve :P And I think I've finally understood how the return value of scanf works since the last time I posted here, so my program can check to see if an integer was entered before processing the input, but I'm stuck on how to make the whole program start over if an integer is not entered. I have a hunch it would involve a loop, but I can't figure out how to make the program start over at "How many mb do you need converted?" if an integer is not entered into scanf..Here is the code I have so far:
Code:
#include <stdio.h>
int main () {
int b, mb, kb, Byte, kB, mB, gB;
char term;
}
[code]....
and my program makes the assumption for now at least, that mb will be inputted because that's the unit of measurement that i usually see advertised, and i didn't bother making an if statement to print a conversion in terms of gigabytes because i've never heard of a connection that fast :P
Visual C++ :: Convert 8 Bytes Into Double And Back?
Sep 5, 2013I receive a byte stream. The first 8 bytes contain an Identification number. I receive at first the lowest byte and at the end the highest byte of the number. How can I transform this into a double value and later back into the bytestream? In the past I hard only 2 Byte values and there I could use things like MAKEWORD and HIBYTE and LOWBYTE to convert the values
View 4 Replies View RelatedC++ :: How To Convert String To Double Without Changing Actual Data
Jun 3, 2013I have to convert string to double. i'm using "atof" function to achieve same.
I have string as "0.0409434228722337" and i'm converting with "atof" But i'm getting double value as "0.040943422872233702". Why it adds 02 additionally at the end?
More example :
"0.0409434228722337" converts to "0.040943422872233702"
"0.067187778121134" converts to "0.067187778121133995"
Is there any other possibility to convert string to double without changing data ?
C++ :: Convert String Variable For The Year To Integer Data Type
May 12, 2014My intent was to convert the string variable for the year to an integer data type. The code compiles but now cannot run on my system. I'm not sure what's going as to what the program is displaying.
Objective: Prompt the user for two years. Print all Comedy movies that were released between those two years.
#include <iostream>
#include <cstdlib>
#include <string>
#include <fstream>
#include <cctype>
using namespace std;
struct Movie {
string name;
[Code] .....
C/C++ :: Read Bytes From A Data File
Dec 5, 2014I am a member of a group still developing the Microprose European Air War game. We have the source code and permission to do this. As the code dates back to 1998 I use Visual Studio 2006.
I have written many programs in Visual basic, and have the following one to read the airbase value in the "targets.dat" file. The file has a four byte header containing the number of tatgets, and a 32 byte data block containing the data for each target.
Private Sub Command1_Click()
List1.Clear
Dim nt As Long
Dim a4() As Long
Open App.Path & " argets.dat" For Binary Access Read As 1
'read and display the number of targets
[Code] ....
Despite many attempts I cannot write the C equivalent of this code into the eaw.exe source. All I really need to know is how to open the 'targets.dat' file and how to get the value of a byte (or integer, or long) at a given position as in the "Get #1, k, a4(n)" line.
C/C++ :: How Many Bytes / Bit In A String
Nov 2, 2012How many bytes in a string ....
How many bit in a string ...
C/C++ :: Read A Line With 8 Bytes Of Data From A File
Jul 23, 2012How to read a line with maximum of 8 bytes from a line in a file.
Let say line has 10248 bytes in one single line and same repeats for remaining lines in the file.
I need to read the first 8 bytes of a line and go on read the last 2 bytes of the line and repeat the till end of file.
C/C++ :: Accommodate Double-size 8 Bytes In 4 Bytes Pointer In 32bit System?
Mar 15, 2015how to accommodate double-size:8 bytes in 4 bytes pointer in 32bit system.
View 1 Replies View RelatedVisual C++ :: Array Of Bytes To String
Feb 22, 2013Using a table with the 256 bytes as strings, said table is used as a reference in the 2 functions of this code. Functions who make the conversion such as the title establishes, and in the inverse way too.
The main advantage is that you don't need any knowledge about managing bytes with c++..
Code:
#include <windows.h>
#include <stdlib.h>
#include <stdio.h>
char* hextabla[] = { //256 BYTES
"00","01","02","03","04","05","06","07","08","09",
"0A","0B","0C","0D","0E","0F","10","11","12","13",
[Code] ....
I leave the project in MSVCPP 6, see attachment...
It's ready to compile in 'Release' mode.
C++ :: Class Template Convert Which Can Convert Itself To Any Data Type
Sep 23, 2012Code:
template<class T>
class Convert {
T data;
public:
Convert(const T& tData = T()) : data(tData)
[Code] ....
Why do we use operator? Is float and double function names below?
Code:
Convert<int>::operator<float> float();
Convert<int>::operator<double> double();
C++ :: Why Address Of Object Is 6 Bytes And Not 8 Bytes On 64 Bit Linux
Mar 24, 2013Code:
int i12 = 1001;
cout << i12 << " " << &i12 << endl;
gives the result: 0x7fff0d065098
It's 6 bytes, but I'd expect the address to be 8 bytes on my 64 bit machine. I am using Ubuntu 12.04, GNU compiler.
So, why the address is 6 bytes and not 8 bytes?
C# :: Unable To Implicit Convert Type Int To String Though Declared Variables As String
Mar 26, 2014Ok, so I'm writing this code and when I build it keeps saying cannot implicitely convert type int to string even though I declared my variables as string. Why is it giving me this error?
private static string Repair()
{
string result="";
string beep;
string spin;
Console.WriteLine("Does your computer beep on startup?:(y,n)");
[Code]...
C++ :: Convert And Return C Format String To String?
Jun 8, 2014heres the function:
string ToString ( const char * format, ... )
{
char buffer[256];
[Code]....
these function do the same of the sprintf() function. but instead we use a variable for add the result, i want to return the result. when i use it:
string f;
f=ToString("hello world");
gives me several errors:
"error: crosses initialization of 'std::string f'"
"error: jump to case label [-fpermissive]"
Visual C++ :: How To Convert UTF-8 String To Unicode String
Jun 15, 2013I am using Visual Studio 2008. I just wonder if there are any library function in Windows SDK or MFC, or from third-parties, that can convert a UTF-8 string into Windows Unicode string(used in CString object).
Can MultiByteToWideChar or ATL String conversion macro like A2W to the conversion?
C++ :: How To Convert Data Types
Jan 9, 2015How to convert these data types? i have an array of bytes in unsigned char[] array, and need to convert to const void* pointer.
View 3 Replies View RelatedC++ :: Convert A Value Into A String?
May 21, 2013I would like to convert a value into a string, and extract a value from a string. And then call these functions in the main.
template<class T>
string toString (T value) // convert a value into a string {
stringstream ss;
[Code[ .....
Are above functions correct? And how should I call in main?
int main() {
const int SIZE=10;
toString<int> intValue(SIZE); //seems not right
toString<double> doubleValue(SIZE); // seems not right
}
C++ :: Not Able To Read Data From Text File And Convert It To Integer
Mar 25, 2013I am trying to read an array values from Tmin.txt file. I take array size from user viz. number of raw & column and then, read the following data from Tmin.txt file which look like this:
20 40 20 25 30
20 30 40 20 25
20 40 20 25 30
20 30 40 20 25
30 40 40 30 40
I am using getline, and then converting it to int by using atoi. But my code is not working.
Code :
// reading a text file
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
[Code] ....
C# :: Receive Data From Serial Com Port In One Line And Convert To Int
Mar 8, 2014i have problem i make code that take data from serial com port for weighting machine it is ok working but it recieve data in more lines.I try to make it receive data in one line In code below i need to take weight fro weight bridge machine automatically by timer in visual studio 2005.it works but receive weight values in more lines. I need to receive weight in one line and automatically updated then convert t to integer
void Application_Idle(object sender, EventArgs e)
{
label3.Text = serialPort1.IsOpen ? "[Open]" : "[Closed]";
}
[Code].....
C :: Convert String To Arithmetic?
Mar 16, 2014I've got this string: Code: char * string = "2+2"; I want to get an integer value = 4 from this. How would I go about doing this.
View 1 Replies View RelatedC :: Convert String To Double
Mar 6, 2015I want to convert string to double. I refered this strtod() - C Library Function Example
Code:
#include <stdio.h>
#include <string.h>
int main() {
const char string[] = "$$GPRMC,013732.000,A,3150.7238,N,11711.7278,E,0.00,0.00,220413,,,A*68";
char term;
const char delims[] = ",";
}
[code]....
C++ :: Convert String To Char
Apr 30, 2013Is there anyway to convert std::string to char*?
Like:
std::string x="hello world";
char* y=x;
C++ :: Convert String IP To Unsigned Int
Nov 10, 2014I need to convert a string IP to an unsigned int (uint32), but however solutions I've found elsewhere have not worked (such as `atoi`).
When using `(uint32)"54.171.82.217 ";` : [URL] ....
When using `atoi("54.171.82.217");`: [URL] .....
How can I correctly convert the string version of the IP to the uint32 type?
C++ :: How To Convert Numbers To String
Sep 26, 2014I'm trying to get two numbers longer than long long int and add them together and multiply. I'm not sure how to convert the numbers to a string.
#ifndef BIG_INTEGER_H
#define BIG_INTEGER_H
#include "BigIntegerException.h"
class BigInteger {
private:
int biginteger[500];
int bigintegertwo[500];
[Code] .....