C/C++ :: Accommodate Double-size 8 Bytes In 4 Bytes Pointer In 32bit System?
Mar 15, 2015how to accommodate double-size:8 bytes in 4 bytes pointer in 32bit system.
View 1 Replies
ADVERTISEMENT
C++ :: Exceeded 32bit Register Value Exceeds 4 Bytes
May 28, 2014My question, What happens when with the 32 bit register value exceeds 4 bytes while programming in c++? Im interested in encryption.
Im programming and doing some calculations. The hex value "0xFA062F2F" multiplied by "6D" sends it over "0x6A74A21703", which exceeds 32bit.
My problem is while programming in C++, I do some calculations such as above, and I get the hex value "0xC0000001" which should be "0x6A74A21703". I made sure that I use long long as my interger type.
How can I overcome this problem with programming.
C++ :: Why Address Of Object Is 6 Bytes And Not 8 Bytes On 64 Bit Linux
Mar 24, 2013Code:
int i12 = 1001;
cout << i12 << " " << &i12 << endl;
gives the result: 0x7fff0d065098
It's 6 bytes, but I'd expect the address to be 8 bytes on my 64 bit machine. I am using Ubuntu 12.04, GNU compiler.
So, why the address is 6 bytes and not 8 bytes?
Visual C++ :: Convert 8 Bytes Into Double And Back?
Sep 5, 2013I receive a byte stream. The first 8 bytes contain an Identification number. I receive at first the lowest byte and at the end the highest byte of the number. How can I transform this into a double value and later back into the bytestream? In the past I hard only 2 Byte values and there I could use things like MAKEWORD and HIBYTE and LOWBYTE to convert the values
View 4 Replies View RelatedC Sharp :: Split A File In Equal Size According To Its Bytes
Apr 10, 2013how to split a file in equal size and when clicking on split button it split the files as well as encrypt split parts and the size information are automatically stored in groupbox and save all splitted files in folder.
View 1 Replies View RelatedC/C++ :: Sizeof (struct) Returns 6 More Bytes Than Actual Struct Size?
Sep 14, 2014#include <stdio.h>
#define MAX_USERS 20
struct {
char ID[10];
char Name[40];
int Pos;
[Code] .....
I was attempting something weired with address to move data around when I discovered that the size of the array is not what I expected. I am passing this structure as &Users to a function that declares it as a void *, then I can deal with chunks of data (memmove) and not have to worry about index or things like that. However...sizeof is returning something I do not understand.
C :: How To Split Int Into 2 Bytes
Oct 23, 2013Im using some motors which run off PWM pins.Theres a High byte and Loq byte register (PWMH,PWML).I have an int which i need to put into these registers but i dont know how???so for example
int:84 -> PWMH=0x00 , PWML=0x54
int:310 -> PWMH=0x01 , PWML=0x36
int:11588 -> PWMH=0x2D , PWML=0x44
C/C++ :: How Many Bytes / Bit In A String
Nov 2, 2012How many bytes in a string ....
How many bit in a string ...
C++ :: The Value Of 8 Bytes For Unsigned Integers
Jan 26, 2014I'm confused about the actual value of 8 bytes for unsigned integers.
The below code suggests the value is 13217906525252912201:
#include <stdio.h>
#include <inttypes.h>
typedef uint64_t byte_int_t;
int main(void){
byte_int_t t;
printf("%" PRIu64 "
", t);
}
./runprogram
13217906525252912201
However, when I use a calculator, I get a different value: 2^64= 1.8446744e+19
So I was wondering is this really 8 bytes? So I try below test and it produces 8, as expected:
#include <stdio.h>
#include <inttypes.h>
typedef uint64_t byte_int_t;
int main(void) {
byte_int_t t;
printf("%u
", sizeof(t));
return 0;
}
So why does C and my calculator provide two different results?
C++ :: Reading Bytes Without Bit Loss
Apr 13, 2013I need to read repeatedly data from a MPEG2 file to the buffer of 188 bytes and analyse data bit by bit.
I have the problem with correct bytes reading from file. In my code listed below I have two methods for that.
First one is lossing this bytes which in hex_base mode have 0 at the begining, eg: 03, 0F, etc.
The second method based on read function which need to have buffer as a char (lenght > 1 byte). Because of that I receive different values from that from file in some cases.
How can I properly read such file?
Code:
#include <iostream>
#include <fstream>
#include <stdlib.h>
#include <windows.h>
using namespace std;
int main() {
fstream plik_in;
[Code] .....
C++ :: Printing Out Bytes Of A File
Sep 4, 2012I am encoding some information in a binary file, and I want to check what I am doing by printing out all the bytes that represent the file.
This is being done by opening a pointer to the file with fopen, reading in each byte of data as a char, and then writing this char to the screen.
I have some image files (e.g. "image.jpg"), whose structure I know, so that I can test my program.
When I print out the chars, they are initially correct, and follow the structure of the file as expected.
However, after about 40 bytes, I find that every subsequent character is ' ' i.e. a blank character.
I then created a CharToBin function, which allows me to print out the actual bits in the char. When doing this, it shows that all the bits are 1 for the characters. i.e. most of the file is represented by 1's, which is clearly not correct.
This happens on all the image files I have tested, and furthermore, on several other non-image files. They all start printing out ' ' after a while. However, all these files are fine and not corrupted, e.g. the image files display correctly.
Code:
#include <fstream>
#include <iostream>
#include <sstring>
#include <string>
#include <stdio.h>
using namespace std;
string CharToBin(char ch) {
bool bits[8];
for (int i = 0; i < 8; i++)
[Code] ....
C++ :: Streaming Bytes Into Integer
Sep 4, 2012I have a FILE stream, and I want to create a function that streams a specified number of bytes (up to four bytes) and returns the value of this, as an integar.
For example, supposing that my FILE has the following data, in hex: 74 C8 02 33 F2 7B....... I then want to stream three bytes and store this as an integar. So, I want to stream "04 08 02". The data stored in the integar should then be "00 74 C8 02", because I have not streamed anything into the first byte. By converting the hex to dec, the integar should then be of the value 7653378 (if it is unsigned).
To try to achieve this, I have written the following function. I create an integar and initialise it to zero, then take each byte from the stream, and OR it with my integar. Then, I shift the integar left by 8, and read the next byte, and so on.
The problem is, when I convert "c" to "c_int", it adds on a load of 1's to the left of the "c" data. This then means that the OR comparison changes all those bits in my integar to 1.
How to solve this? I am also wondering whether there is a much more simple way of doing this, rather than having to write my own function....
Code:
int StreamFileToInt(FILE *fp, int num_bytes) {
char c;
int c_int;
int x = 0x0000;
for (int i = 0; i < num_bytes; i++) {
[Code] ....
C++ :: How To Convert Bytes To ASCII
Feb 7, 2014How can I convert bytes to ASCII?, I read wikipedia about UTF-8 and I understood a little bit about add or split bytes to change the value.
Now I have those bytes
0xC7 0xE6 0xC2 0x91 0x93 0x7B 0xCE 0x01
And I found a program (DCode) that convert to 64 bits little-endian, supposedly those bytes in ASCII is this.
lun, 08 julio 2013 04:28:17 UTC <---
C :: Checking How Many Bytes Are Remaining In A File?
Feb 22, 2013while bytesremaining >=8 do something;
if bytesremaing <8 then something else .
I am new and don't know how to code for this.
C :: How To Read In Nine Bytes And Check To See If There Is A Match
Feb 22, 2013and see if the first three match a list then read in three more behind those that were left and perform a similar test on them and keep going?
View 8 Replies View RelatedC :: Program To Convert Bits To Bytes
May 13, 2013I made this program to convert bits to bytes, because I'm so sick of seeing ISP's advertise speeds in megabits, which I consider an intentional attempt to decieve :P And I think I've finally understood how the return value of scanf works since the last time I posted here, so my program can check to see if an integer was entered before processing the input, but I'm stuck on how to make the whole program start over if an integer is not entered. I have a hunch it would involve a loop, but I can't figure out how to make the program start over at "How many mb do you need converted?" if an integer is not entered into scanf..Here is the code I have so far:
Code:
#include <stdio.h>
int main () {
int b, mb, kb, Byte, kB, mB, gB;
char term;
}
[code]....
and my program makes the assumption for now at least, that mb will be inputted because that's the unit of measurement that i usually see advertised, and i didn't bother making an if statement to print a conversion in terms of gigabytes because i've never heard of a connection that fast :P
C++ :: Breaking A Float Into Bytes For Binary I/O
Aug 12, 2013I'd like to know how I could break a float into individual bytes for binary use.
Sounds simple, but it seems as though the compiler doesn't realize everything is just a series of bytes.
C++ :: How To Create Character Array That Has 128 Bytes
Sep 23, 2014m_sName-- character array shall be 128 bytes
How do i create a character array that has 128 bytes?
C++ :: Deleting Certain Bytes From Binary File?
May 26, 2013How to delete certain bytes from middle of a binary file?
Those bytes are in fact of a struct.
One approach I found was to re-write the whole data except the struct I want to delete. But may be its not good one if file size is in gb and I will have to write complete data again.
C# :: How To Combine Two Bytes In Int32 To Get Original Value
Jan 6, 2015how to combine two bytes (each byte is 8 bits wide) in order to get the original value. I am displaying values(from 0 to 500)sent from my microcontroller on the GUI.I can successfully display values from 0 to 255 as this requires just sending a byte. However sending values from 256 to 500 requires sending two bytes. The problem I am having is that I was unable to re-combine the received two bytes in order to get the original value. Below are my lines of code:
int main( void ) // this is the main function inside the microcontroller {
sei();
USI_TWI_Master_Initialise();
Spi_Master_Init();
while(1) // I am using this loop to send 500(111110100) {
Transmitt_Receive(244);//this function sends LOW BYTE of 500(11110100)
_delay_ms(1000);
[code]....
When I combined the two bytes using the above arrangements, instead of getting 500 my GUI displayed 62708.I got the same result when I used BitConverter.
value3 = BitConverter.ToInt32(val,0);
C++ :: How To Read Single Bytes From Wifstream
Apr 27, 2013I want to read a single byte from a wifstream. With an ifstream I would use read(), but given that the char type for an wifstream is wchar_t (2 bytes), this is also being used by read(), so how can I read a single byte from such a stream?
View 3 Replies View RelatedC++ :: Write Process Memory Bytes
Apr 8, 2014Writing bytes to external process to remove a detour that the program does
this is what im trying it fails
HANDLE Handle = OpenProcess(PROCESS_ALL_ACCESS, false, ProcessId);
BYTE btLdrLoadDll[] = { 0x8B, 0xFF, 0x55, 0x8B, 0xEC };
if (!WriteProcessMemory(Handle, (BYTE*)((DWORD)GetProcAddress(GetModuleHandle("ntdll.dll"), "LdrLoadDll")), &btLdrLoadDll, sizeof(btLdrLoadDll), NULL)) {
CloseHandle(Handle);
std::cout << "
Failed to write Bytes to memory. Press enter to exit.";
[Code] ....
an also using the right address like this fails
WriteProcessMemory(Handle, (BYTE*)0x77C64F9F, &btLdrLoadDll, sizeof(btLdrLoadDll), NULL)
C/C++ :: Reading Hexadecimal Bytes From A File?
Jan 19, 2014#include <stdio.h>
#include <stdlib.h>
int main(int argc, int * argv) {
char buffer[16];
FILE *fp;
unsigned long long test;
unsigned char key[16];
fp = fopen("D:key.txt","r");
[code].....
i searched for a code for reading bytes from a file and i found this one but when i run the program, it doesn't return the bytes written in the file, it returns another bytes / what is the problem?
C/C++ :: Read Bytes From A Data File
Dec 5, 2014I am a member of a group still developing the Microprose European Air War game. We have the source code and permission to do this. As the code dates back to 1998 I use Visual Studio 2006.
I have written many programs in Visual basic, and have the following one to read the airbase value in the "targets.dat" file. The file has a four byte header containing the number of tatgets, and a 32 byte data block containing the data for each target.
Private Sub Command1_Click()
List1.Clear
Dim nt As Long
Dim a4() As Long
Open App.Path & " argets.dat" For Binary Access Read As 1
'read and display the number of targets
[Code] ....
Despite many attempts I cannot write the C equivalent of this code into the eaw.exe source. All I really need to know is how to open the 'targets.dat' file and how to get the value of a byte (or integer, or long) at a given position as in the "Get #1, k, a4(n)" line.
C/C++ :: How To Convert Bytes Of Data To String
Jan 24, 2014How to convert bytes of data to string using c programming , I searched but i didnt get appropriate one .
Example : 112131(bytes) to string ("some sample")
Visual C++ :: Array Of Bytes To String
Feb 22, 2013Using a table with the 256 bytes as strings, said table is used as a reference in the 2 functions of this code. Functions who make the conversion such as the title establishes, and in the inverse way too.
The main advantage is that you don't need any knowledge about managing bytes with c++..
Code:
#include <windows.h>
#include <stdlib.h>
#include <stdio.h>
char* hextabla[] = { //256 BYTES
"00","01","02","03","04","05","06","07","08","09",
"0A","0B","0C","0D","0E","0F","10","11","12","13",
[Code] ....
I leave the project in MSVCPP 6, see attachment...
It's ready to compile in 'Release' mode.