Visual C++ :: Debugging - Revisiting Same Memory State?
Oct 31, 2013
When running my code in Visual Studio, there is a particular point in the code where my program is crashing. To debug this, I am adding a break point in Debug mode just before that point, and observing what happens as I step through the code. However, to get to this break point in the code takes about a minute of running the program. So I'm wondering if there is a tool in Visual Studio to reload the state of a program's memory from a previous run, so that I can immediately get to the break point without having to wait for a minute each time?
View 6 Replies
ADVERTISEMENT
May 10, 2014
I am making a MFC application with VC++2012 with receiving data from Serial Port and the data is stored in a Listbox, then after processing (convert into numbers) and get these data to draw a sine wave on the chart. (I intend to make a virtual oscilloscope).
Everything works ok at the beginning, but after receiving about 300 items or above (in the Listbox) the value seem stucking (or lagging) and work very slowly.
I receive data by the SerialPort_DataReceived() method, and process of converting and drawing chart also in this method, I think this makes the system overload!!
View 1 Replies
View Related
Aug 12, 2013
I have a crash on a application the customer machine i couldn't reproduce it yet on my machine... all i have is the error message
The Instruction 0x0070478b referencing to the memory 0x00000000 could not be written.
And that's all i have how do i track that instruction on my program from that address? is it possible?
View 4 Replies
View Related
Nov 4, 2012
I see there's something called a manifest file but VS C++ EXPRESS seems different than non-express. The solutions I've seen show applets/tabs that I don't have in Express.
In one of my physical DEBUG folders are some .manifest. files and some a .res and .rc file.
I know you need to edit the XML and change asInvoker to requiredAdministrator (or something like that).
The confusing part is if I go into Project Properties, MANIFEST TOOL caret/tree, under INPUT AND OUTPUT, it shows this .manifest file is OUTPUT. It's as if it rewrites it every time with some defaults? I have edited it, but I see it's back to asInvoker. There is a spot to put in a ADDITIONAL manifest file (or .res file).
Does a manifest somehow affect the physical .exe file (something is imbedded in it??)?
How do I change my project to make sure that the .exe always runs as Admin? Will doing this ALSO allow me to DEBUG it in VS C++ EXPRESS without having to do anything different (play with manifest or run VS outright with Admin level)?
View 2 Replies
View Related
Dec 20, 2012
I am debugging a library. I can step into the code however the watch window doesn't show the values of any variables. It will display a message in the value field:
Code:
m_pParentCXX0017: Error: symbol "m_pParent" not found
Interestingly it does show values for local variables in that function but not member functions. Most of my data members are member function though that I want to debug. I am using VS2010.
View 3 Replies
View Related
Mar 16, 2013
I've been trying to figure out how to implement a way to save this board state throughout a user's inputted path. At the end, I need the output to print out the board states (user's path) of how he or she got the puzzle solved. This puzzle is the 15 Puzzle; but we have it to change by the user's input on what size they want to play (3x3 to 5x5). How to save the board state of each user input, then print those out in order from beginning to solved puzzle state. Subsequently, I would also need transferring the board state to change with using a vector to store the size based on user input. How to proceed, using a first search to solve the puzzle from the current board's state.
calculations.h
Code:
/*Calculations set as a header to keep compiling simple and faster*/
#ifndef calculations
#define calculations
int solved[5][5];
void initialize(int board[][5], int);
void slide(int board[][5],int move,int);
bool isBoardSolved(int board[][5],int);
[Code] .....
View 6 Replies
View Related
Feb 18, 2013
what is the empty state of queue?
View 5 Replies
View Related
Jan 23, 2014
I want to create command line game in Linux but I don't know to get the key state. I heard of getch() but that stops the program.
View 1 Replies
View Related
Mar 27, 2014
I thought that an operator performs a permanent change in a local variable. For example, if x is 00000000 00000000 00000000 00000011 (a 32 bit unsigned integer that resolves to value of 3) and p is 2, in the expression "return (x >> p) | (x << (s - p))", the right shift would permanently change x to 0 and the time we evaluate x again in "(x << (s - p))", x will already be 0. If that's the case, then this function doesn't make sense. This function makes it seem like that the >> and << operators do not change the value of x. It makes it seem like first we right shift x to 0 and then left shift by 20 bits to make x 11000000 00000000 00000000 00000000. If that's the case, then the function does exactly what it is supposed to do (rotate the bits). So which is it?
unsigned int rightrot(unsigned int x, unsigned int n) {
size_t s = sizeof(x) * CHAR_BIT;
size_t p;
if(n < s)
p = n;
[Code] ....
View 2 Replies
View Related
Mar 17, 2013
I'm getting an error message that I can't seem to fix. The error clearly states that during the link aspect of the debugging and build there is an error that says that the stdio.h file is either missing, invalid or corrupt. When I try to program using any of the other headers I'm getting the same error. The files are there I can see them in the include folder, so I'm asking what can I do to fix all these headers and beware I am a beginner at programming and using any kind of compiler.
This is the error I receive.
1>------ Build started: Project: hello, Configuration: Debug Win32 ------ 1>LINK : fatal error LNK1123: failure during conversion to COFF: file invalid or corrupt ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped =========
This is the compiler I am required to use for an online course and all instruction is given for the Microsoft visual 2010 express edition. Also the only file I think that's being referenced is the #include <stdio.h>.
View 1 Replies
View Related
Apr 11, 2013
I have a code that I'd like to debugg it.
Question
1 - What is the correct command line to use the debugger ?
2 - Do I need to install additional software for the debugger ?
if yes what it's name?
I use ububtu 12.4compiling command: gcc abc.c -lpthread -o abc
View 3 Replies
View Related
Jul 16, 2013
Notes: Im Using SDL, Im using Codeblocks to code
Ive narrowed down my crashing problem ( using printf's ) to a malloc call I had to use printf's because when i ran the program in Codeblocks debugging mode, it did not crash and ran fine, but when i ran it normally, it would crash, giving me this error:
fatal signal segmentation fault (sdl parachute deployed)
Inside my code, I created a malloce function that checks malloc for me ( so i dont have to do it )
( general.h )
void* malloce ( size_t size )
{
printf ( "start malloce %i
", size );
[Code]....
funny thing is that i called this malloce function about 20 times before it hits this part of the code, it is unknown behavior to me!
View 10 Replies
View Related
Oct 7, 2014
I am remaking this code for my gain, and it seems that I cant debug the error..
Are there any comments on the structure of the code? Why are there errors in calling the functions?
#include <iostream>
#include <cmath>
#include <iomanip>
[Code].....
View 6 Replies
View Related
Oct 13, 2014
I have a bug and when I debugged in some point i needed to know whats inside my char **grid , when i hold mouse over this variable in debug mode i can only see hex or address.. ! i cant see my values grid is 10 * 10 table which hold a number from 1 to 3 .... is there any way for me to see whats inside ?
I'm using visual studio 2013 ultimate ....
View 2 Replies
View Related
Feb 13, 2014
The purpose of the code is to read in state names, say california and print CA. However, if it was a state with two words, it would read in only the first letter of each. I.E New Hampshire would be NH.
here's my code:
#include <iostream>
#include <iomanip>
#include <cctype>
[Code].....
I am able to get the one word states and tried getting the two word states but it doesnt work.
View 1 Replies
View Related
Apr 20, 2013
I am making a finite state machine for a lab. I have here a 2 files with the code for the FSM. I know it isn't finished yet, I know what needs to be put in. The only things I would need help on are the errors that I get.
Warrior.h
#ifndef _WARRIOR_
#define _WARRIOR_
#include "State.h"
[Code]....
View 1 Replies
View Related
Mar 28, 2015
I am supposed to take the three string lines from a text file and then individually reverse them and state whether or not they are a palindrome. I have the three lines from the text file into string variables already but I am not sure on how to reverse them and then see if they are the same reversed(palindrome)
Here is my code so far -->
#include <iostream>
#include <string>
#include <cctype>
[Code].....
EDIT: Ignore line 123 and down in the code. That was merely test code and will not be used.
View 7 Replies
View Related
Apr 15, 2013
I want to know what was wrong with my code when I submitted. It's a Traveling Salesperson Problem, and the code is complete for the most part. I just can't seem to find what's causing the segmentation fault even after attempting to debug with gdb. Something is supposed to be wrong with line 76, but I don't see how my arrays are messing up. I've looked through this code countless times, and I know I'm just missing something small. I just don't want to end up making whatever mistake I made on this again in the future.
Code:
#include <stdio.h>
#include <stdlib.h>
#define SIZE 20
[Code]....
View 9 Replies
View Related
Oct 6, 2014
I have something like this
string rid = row.Cells[0].Value.ToString();
string identification = row.Cells[9].Value.ToString();
IDLabel.Text = "ID: " + rid + " <Identification: " + identification + ">";
I checked that while identification has a value, the IDLabel.Text was run just fine, but if identification has null value, IDLabel.Text was skipped totally...
View 13 Replies
View Related
Aug 14, 2013
It's common to see the following macros:
Code:
#define DEBUG_NEW new(__FILE__, __LINE__)
#define new DEBUG_NEW
and overloading operator new for debugging purposes. It usually works but there is a problem when use operator new syntax in code instead of directly use new. I can change my code but i can't change third party's code. Something like this:
Code:
int* j = static_cast<int*>(::operator new(sizeof(int)));
It's not common, but it appears occassionally.With that syntax, new macro generates compilation errors.
Is there any way to fix this problem?
View 2 Replies
View Related
May 2, 2013
Question: State the values of each of these int variables after the calculation is performed. Assumed that, when each statement begins executing, all variables have the integer value 5.
a) product *= x++;
b) quotient /= ++x;
What is the answer for a and b?
View 4 Replies
View Related
May 5, 2014
I am trying to initialize this chunk of code without it starting at the main menu in my state program:
boost::asio::io_service io_service;
tcp::resolver resolver(io_service);
tcp::resolver::query query(argv[1], argv[2]);
tcp::resolver::iterator iterator = resolver.resolve(query);
chat_client c(io_service, iterator);
boost::thread t(boost::bind(&boost::asio::io_service::run, &io_service));
char line[chat_message::max_body_length + 1];
This code came from a example at the boost example list: URL.....I want the networking to start when the multiplayer state initializes. This is how my program basically looks like:
//Main.cpp
main() {
if (!quit) {
while( handleing_events ) {
CurrentState->handleEvents();
[code].....
I tried to put the stuff in extern at states.h, and initialize it at Multiplayer(), but in handleEvents & ~Multiplayer, it says "c" is not defined...
View 8 Replies
View Related
Oct 17, 2013
In the following code example of the State Design Pattern, in the main code at the bottom it defines an instance of class Machine, and then calls Machine::off;. Why doesn't it instead call fsm.off;?
Machine fsm;
Machine::off;
Then I tried imitating that by adding a class Abba, and then doing:
Abba a;
Abba::DoStuff();
but that didn't work. Why?
Full code example:
// StatePattern.cpp : Defines the entry point for the console application.
//
#include "stdafx.h"
#include <iostream>
using namespace std;
class Machine {
class State *current;
[Code] ....
View 3 Replies
View Related
Dec 11, 2014
I'm supposed to create a circular buffer that reads an input file and outputs data after running though basically an integral equation. Everything my be referenced by pointers. When I build I am being told segmentation fault: 11. From what I have gathered that means there is a problem with my memory allocation correct? I'm including the custom header file and the main.c as well.
header file :
#ifndef FSM_H
#defineFSM_H
#define INPUT_BUFFER_LENGTH 2
#define OUTPUT_BUFFER_LENGTH 2
#define INITIAL_INPUT {0,0}
#define INITIAL_OUTPUT {0,0}
[Code] .....
View 1 Replies
View Related
Apr 15, 2013
I have written my code, but can't seem to figure out why it doesn't enter the while loop and start asking for Input.
Code:
#include <iostream>
#include <string>
using namespace std;
int main(){
//declare variables
string cityName = "";
string stateName = "";
[Code] ....
View 3 Replies
View Related
Feb 18, 2013
I have a JPEG in memory as a char* and a bytesize, if I save it to disk with a .jpg extension it's a perfect JPEG file. The thing is, I don't want to save it unless it's a minimum width/height. I got it into memory using a socket recv() call. What should I do ?
View 6 Replies
View Related
