I am using matlab R2o11 in which the programming medium is c++. I am having these variables=
T=373 t0 376
V=0.09 to 1
P=T/V
I just need a result showing ... First it should take T=373 and solve the equation using all volume values. Then it takes another temperature and do the same.
I am creating a program that solves the quadratic equation ax^2 + bx +c.
I have this program almost complete except the output of the equation in the function called display_quadratic. I need the program to display the variables a,b,c in the equation ax^2 + bx + c but I am having 2 problems. My first problem is that I cannot get the right addition and subtraction signs for the equation.
For instance, if the program had the values for a,b,c as 2,2,3
it will display 2x^2 2x 3
How can I get it to display 2x^2 + 2x + 3? or if it was negative like 2x^2 - 2x - 3?
My next question is how do I get to not display the coefficients that are 1?
I had an if-else statement but no matter what I created it would overlap with another statement and print out twice. Here is the code:
Code:
#include <stdio.h>
#include <stdlib.h>
#include <math.h>
void display_quadratic (float a, float b, float c);
float root1(float a, float b, float c);
[Code] ......
I have a small project for school due today but i cant get my head around programming
Ive to create a program where ive to get the values from the user and add them to an equation. I have also to add a selection statement where it will ask for the material being tested which will have its value set in the program.
I am having trouble with calculating the volume of a cone
Assignment: Using the knowledge you already have, create, build, run, and correct if necessary a program that will calculate the volume of a cone. Insert into your code values for diameter of the base and the height. Use variables, constants, literals, and mathematics as necessary.
The formula for the volume is:
1/3 π x Radius2 x Height
Hint: you will need to add to your program two lines where appropriate:
#include <cmath>
const double PI = 2*acos(0.0);
Here is my current code:
#include <iostream>
using namespace std;
int main () {
//diameter of the base
float diameter = 3;
[Code] ....
I have a problem: solve the system of equations by the Gauss-Jordan methods with pthreads. I have a big matrix A (for example 2000x2000), so i must solve Ax = b. Before I devide matrix to number of threads and each thread must work only with his peace of matrix.
Code:
#include <iostream>
#include "synchronize.h"
#include <pthread.h>
using namespace std;
typedef struct _ARGS {
int thread_count;
int thread_number;
[Code] .....
I write it on Ubuntu, and when I compile [g++ main.cpp -o main -lpthread -lm] the it works good(for example, if in 1 thread I get time_of_working = 10 sec, on 2 threads time_of_working = 5.4, i.e. about 2 times faster ), if I compile like this [g++ main.cpp -o main -lpthread -lm -O3] it is only 1.2-1.3 times faster.
Using a for loop, construct two 100 element arrays, x and y, such that element i of x stores the value sin(2*pi*i/100)) and the corresponding element of y stores cos((2*pi*i/100)). Print the values stored in the elements of x and y as you calculate them.
I have attempted to solve it but I'm not sure why the value 0 is only being printed, maybe I haven't assigned sin(2i/100)) and cos((2i/100)) to the arrays properly?
Code:
#include<stdio.h>
#include<stdlib.h>
#include<math.h>
int main () {
[Code] .....
I need to make a program which solove difference between two interested times in format hh:mm i made it but it doesn't give me right answers for all times for example it can't solve times like 23:50 and 0:15 and it says that difference is 23:35 and no 00:25
View 3 Replies View RelatedMy task I am trying to accomplish is write a program for C++ that numerically solves a quantum harmonic oscillator. I have a routine that I am trying to implement into this program that iterates through a matrix and finds it eigenvalues, however, I do not know how to put it all together to make it work. Code is below:
Code:
//Compiler flags and numerical constants
#include <iostream>
#include <math.h>
#define L 10.0
#define N 200
using namespace std;
[Code] ....
Here is the code:
#include <iostream>
using namespace std;
int main(int argc, char * argv[])
{
double foo [5][5];
This is the warning:warning: extended initializer lists only available with -std=c++0x or -std=gnu++0x...It's referring to the boldened part.
I'm am trying to get info from a file and put it into three arrays but it isn't working.
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
void sort(ifstream& infile){
[code]....
I'm making a simple airline reservation. I have two list boxes one has the section (A, B, C, etc) and the other rows (1, 2, 3, etc). I used two different arrays to put the values into the list box via form unload. The problem I can't seem to figure out is how can I update these seats and inform the user if a seat is taken or not. Lets say a customer takes A-1 (only seat taken). If I try to add someone else there it will inform me that seat is taken and to select another one. If all the seats are taken it'll tell me to put customer into the waiting list.
Also one more thing is that each row has 3 seats, so A-1, A-2, A-3 for example. If say A-1, A-2 are taken when I push a button show remain seats it should show A-3 only. I have a lot od struggle using arrays.
#include<iostream.h>
#include<conio.h>
class sum {
int a,b,ans;
public:
void geta() {
cin>>a;
[Code] ....
I'm still pretty new to classes so what am i doing in this code that is wrong.
#include <iostream>
#include <stdlib.h>
#include <time.h>
#include <string>
using namespace std;
class BunnyInfo{
[Code]...
I am trying to create a program that will give me an value for a chosen from the user array ut I believe the program I've made does not recognize the values of the previous arrays. (Here is my program):
#include<stdio.h>
int main() {
int n;
int i;
int j;
float c;
float a[10000];
[Code] ....
There must be problem cause every value I give n(only for n=1 the answer is correct) the result is "a[n] is -inf"
I working on an assignment that processes an array of structs. In the main function I am attempting to declare an array of Author structures with 3 elements. It is supposed to be initialized to set all of the string fields (the names and book titles) to "NONE", and the double fields (the prices) to zero. This is supposed to be done in one statement, not using loops. Here is what I have.
struct BookInfo struct Author
{ {
string title; string authorName;
double price; BookInfo books[SIZE] //SIZE = 3
}; };
//prototype for function to print the content of array on screen
void showInfo(Author a[], int size);
[Code] .....
I was under the impression that an array can only hold the values of one data type. So doubles and strings in the same array doesn't make sense to me. However, that's the example my teacher drew up. The error keeps telling me that there are too many initializer values.
I wrote this code for a homework assignment, everything runs fine but the function void percent_votes (line 66) isn't calculating properly, it outputs 0.00 for each value. I have tried everything I can think of to try and make it work.
Here is the assignment: Write a program that allows the user to enter the last names of five candidates in a local election and the number of votes received by each candidate. The program should then output each candidate's name, the number of votes received, and the percentage of the total votes received by the candidate. Your program should also output the winner of the election.
Here is the code I have written:
#include <iostream>
#include <string>
#include <iomanip>
#include <cmath>
[Code].....
I cant get with part of it is wrong, i want to sum every row, too.
// Color Number.cpp : Defines the entry point for the console application.
//
#include "stdafx.h"
#include<conio.h>
#include<iostream>
[Code].....
What i try to do is to write a code which reads some specific values from a file and stores them in an array. My File looks like this
Code:
XFOIL Version 6.96
Calculated polar for: Myfoil
1 1 Reynolds number fixed Mach number fixed
xtrf = 1.000 (top) 1.000 (bottom)
Mach = 0.000 Re = 0.200 e 6 Ncrit = 4.000
}
[code]...
I am trying a program with that takes tree arrays of same even lengths and adds the values at odd indexes and save at even index of 3rd array and voice versa........
what will be the logic i have tried it a lot of time not worked................
I have a problem with my assignment. I would like to ask how to transfer positive and negative values from array temperature to arrays positive and negative?
#include <iostream>
#include <iomanip>
using namespace std;
int main(){
int n=0, d=0, temperature[20], sum;
int positive[], negative[];
float avg;
[code]....
have to do an election program in C.
There are 7 candidates and 365 votes in total. I need to do this using an array of structures. I need to read from a text file each of the names of the candidate and the number of votes they get. At the end i need to output the winner of the election.
Here is a sample of my code so far
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
struct candidates {
char name[20];
int votes;
[code]....
Here is a sample of my text file:
Robert Bloom
John Brown
Michelle Dawn
Michael Hall
Sean O’Rielly
Arthur Smith
Carl White
1 2 4 5 1 2 3 4 4 1 2 3 7 4 4 5 3 7 7 7 7 7 7 7 7 7
Each candidate gets +1 vote for their number electionCandidate[0] for each one he gets one vote and so on for the rest. 365 voters in total.
I was able to input the name for each Candidate from the text file. Now the problem is putting each vote to the corresponding candidate. Also any vote that is above 7 is a spoilt vote which i am trying to count in the above code. The code compiles but it crashes.
I am using while(!feof) but it seems that its not working or this is not the correct way.
I've been working on an assignment that deals with newspaper advertisements. I have two arrays:
categoryCode (the code for the advertisement's category such as pets, cars, etc) and
numWords (number of words in the ad).
The arrays are dynamic.
My assignment has the category listed each time there is an ad associated with it and then its number of words for that ad. If this were a real-world issue I would want my output to list each category only once despite how many ads were in it, list how many individual ads are in the category, and its total number of words for the ads in that category. When using parallel arrays, is there a way to do this?
Let's say I have categoryCode with three elements {5, 5, 7} and numWords {10, 12, 15}.
How would I make the numWords add together only when the categoryCode values are the same?
I would want the output to print:
Category 5 Ads 2 Words 22
Category 7 Ads 1 Words 15
rather than how my instructor is having us do it like this:
Category 5 Words 10
Category 5 Words 12
Category 7 Words 15
I think I'm getting hung up because my mind is confusing the element's location in the array with the element's actual value and I'm probably making this harder than it should be. How would I compare the categoryCode values in a dynamic array? If it were a fixed size I think I could just compare categoryCode[0] to categoryCode[1] and so on, right? But in this case I'm not sure how I would go about that.
I'm working on a homework assignment that asks me to roll two die a user given number of times, find the roll sums, and a few other things. I'm working on it one module at a time and I'm running into two big problems so far.
The first problem is that my int variable rolls changes to a number within the random number generator range of numbers after I run rolldie. I got around this by making a const equal to the user entered value of rolls just so that I could continue developing the program.
My second problem is that the values of the arrays resultsOne[] and resultsTwo[] are changed after running findsum(). Why this is happening and I even tried passing them as const, but that changed nothing. We just started learning about passing arrays to functions, so there might be something big that I'm missing.
Code:
#include <iostream>
#include <cstdlib>
using namespace std;
void rolldie(int resultsOne[], int sizeOfresultsOne, int resultsTwo[], int sizeOfresultsTwo);
void findsum(int resultsOne[], int sizeOfresultsOne, int resultsTwo[], int sizeOfresultsTwo, int tossSums[], int sizeOftossSums);
[Code] ....
I need to write a function that will merge the content of two sorted arrays of type double values. The function should not assume that both its input parameter arrays are the same length.
Here is my program so far - I know there is alot of errors and mistakes:
Code:
#include<stdio.h>
void merge(int firstArray[],int secondArray[],int size) {
int mergedArray[size],i=0,j=0,k=0;
while(i<size||j<size) {
if(i==size) {
[Code]...
My assignment is writing Madd Libs game. I still do not understand how to store inputted strings or values to arrays. I need explanation of collecting inputted data to arrays.
#include "stdafx.h"
#include<stdio.h>
//#include<string.h>
int main(void) {
char string[37] = {' '};
char adjective1[15];
[Code] ....
n the requirements it says this;
-create a get and set for height, width, length.
-A default parameterized constructor = 1
-A method to resize the box
-A method to get the volume of the box
-A method to convert the object to a string
My Questions:
The 3 parts I am confused by are the default parameter constructor, the re-size the box and the method to convert to string. For the default parameter part I figured making length, width and height = to 1 would work, but I'm pretty sure thats not what I'm supposed to do.
This is the main file
#include "box_class.h"
#include <iostream>
using namespace std;
int main() {
double length;
double width;
double height;
double volume;
[Code] ......