this is the code I tried in my code block 10.05.....tried code for removing all white space from a line of a txt file. this is my code it runs but i cant get the result i need.
#include <iostream>
#include <conio.h>
#include <fstream>
#include <string>
[Code].....
Write a program that opens a file and counts the whitespace-separated words in that file.?
My code that i wrote for this example is as follows...
#include <iostream>
using namespace std;
#include <iostream>
#include <string>
#include <fstream>
int main() {
string filename = "Question 1.cpp"; // File name goes in here
[Code] ....
Is this correct or am i missing something?
Question is : Write a program that opens a file and counts the whitespace-separated words in that file.?
my answer is :
#include <iostream>
using namespace std;
#include <iostream>
#include <string>
#include <fstream>
int main() {
string filename = "Question 1.cpp"; // File name goes in here
[Code] ....
Now I am not sure if im suppose to get a msg saying : The file "Question 1.cpp" has 0 words.
im wondering is the question that im being asked, asking me to input a string of words and then the compiler when it builds and runs the program counts the word spaces.?
So I have a text file named test.txt on the root of my c:/drive.
I finally managed to arrays working and reading into them, but when I started looking at the data in the array I noticed that stringstream was not "grabbing" a specified space. LINES 83-88
The text file contains the following (note that there is an intentional space after the first word):
I ' m s o r 0 y 4 D a v e , 5 12 12 12 3 7 f 11 2 i d 5 8 1 c 5 n 10 t 5 7 17 2 3 h 7 2 .
I need that space to be caught in the steam, there will always be only one space after a various first word, but I need it in my array and stringstream doesn't catch it.
if you need to run it, just copy the text to a file named c:/test.txt
When you run the code, you will see after the 3rd iteration it skips the space, is there a way to change this, so I can focus on the decryption algorithm??
#include <iostream>
#include <fstream>
#include <vector>
#include <string>
#include <stdio.h>
#include <sstream>
#include <cctype>
bool is_number(const std::string& s){
std::string::const_iterator it = s.begin();
[Code] ...
I've got myself a 2d array
int[,] map = new int[100,100];
I've populate that will a bunch of 1's and 0's. The 1 represents a wall, and a 0 is dirt.
I'm looking for a way to clean up my blank spaces outside of my walls. Any algorithm I can use to identify these big areas and replace them with a '1'
for (int y = 1; y < map.GetLength(1) - 1; y++) {
for (int x = 1; x < map.GetLength(0) - 1; x++) {
// Inside here is where I was hoping to archive my work
bool draw = true;
foreach (Room room in rooms)
[Code] ....
Attached is an example of my output.As you will be able to see, there is a lot of brown. I want to fill the brown with walls, but leave space for a path between the rooms.The 'draw' bool is true when I'm outside of a room, just so I don't start throwing walls inside my room.
Example of what the array would look like (for those who don't know)
int[,] map = new int[100,100]
{
{0,1,1,1,1,1,0},
{0,1,0,0,0,1,0},
{0,1,0,0,0,1,0},
{0,1,0,0,0,1,0},
{0,1,0,0,0,1,0},
{0,1,1,1,1,1,0},
};
I'm doing a project that takes in a input file with Quarterback statistics. It has their name, team, completions, sacks, touchdowns, etc. It has 16 different variables in all (17 if you count first/last name as two). So I'm trying to read them and I can't figure out how to jump to the new line after it's read the file and put the information in the variables I've created.
#include <iostream>
#include <fstream>
using namespace std;
ifstream din;
void openFile() {
[Code] ....
That's the program I've written. The loop keeps displaying the first line of the file over and over. How can I get it to go to the second line, then the third, then fourth, etc? I need it to display all the lines of the file until it reaches the end of the file.
General Purpose: Delete all "white spaces" in text file, until the read-in char is _not_ a whitespace (mark as start of text file).
Problem: Cannot seem to shift char's over properly. (I think my problem is the inner loop - however other code may lead to this problem - I do not know)
Code:
#include <fstream>
#include <iostream>
using namespace std;
bool trimWhiteSpace(fstream &file, char * charMemoryBlock) {
if (!file.is_open()) {
[Code] ....
I have a measuring board that writes a .txt file in the following format:
board number;type;NUL;channel;measured value;date and time
DS207;5000007;NUL;0;20251;11.07.2013 12:30:02 MESZ
DS207;5000007;NUL;1;10159;11.07.2013 12:30:02 MESZ
DS207;5000007;NUL;4;27.18;11.07.2013 12:30:02 MESZ
DS207;5000007;NUL;0;20233;11.07.2013 12:35:02 MESZ
DS207;5000007;NUL;1;10149;11.07.2013 12:35:02 MESZ
DS207;5000007;NUL;4;27.31;11.07.2013 12:35:02 MESZ
DS207;5000007;NUL;0;20256;11.07.2013 12:40:02 MESZ
...
I would like to extract and analyse the data but the data behind the NUL entry is not accessible for me maybe due to the fact that NUL normally marks the end of a line. Is there a method to remove the NUL entries in this text file?
I have a text file (test.txt) with the following data:
01,05,25,20130728
01,06,25,20130728
01,07,25,20130728
01,08,25,20130728
01,05,25,20130728
01,05,25,20130728
01,05,45,20130728
01,05,65,20130728
01,05,85,20130728
01,05,35,20130728
01,05,25,20130728
01,05,35,20130728
I want to read this to one string called line. So far I have this code:
string line;
ifstream myfile ("/home/Test.txt");
if (myfile.is_open()) {
while (myfile.good()) {
getline (myfile, line);
for (int a = 0; a <= 335; a++) {
cout <<line.at(a);
} }
myfile.close();
}
so far its only printing the first line and then throwing an instance of 'std::out_of_range'
I can able to get the last line ten chars but i cant get if the last line is null.
here is my code
#include <cstdlib>
#include <iostream>
#include <fstream>
#include <sstream>
#include <string>
using namespace std;
int main(int argc, char *argv[]) {
[Code] ....
here with i have enclosed my file where i am pick my last ten chars ...
Attached Files : log.txt (4.8 KB)
I have been trying to make a small program that I will be using in a larger program that will make the user press space to see the next line of output.
Not exactly sure what I'm doing wrong, but I'm pretty sure that I need to put the space that the user would enter into an output file, and the read the input file
It runs, but it doesn't allow me press space before showing the next line.
I added a getline(cin, charVar) before, but I got a whole bunch of errors.
#include <iostream>
#include <string>
#include <cctype>
#include <cstdlib>
#include <fstream>
using namespace std;
// function for dialouge
[Code] ....
I have a .txt file which I want to read from and then write a new text file, this time with sorted lines. It is easy to sort one value, but what about sorting entire lines based on one value?
I want to sort the lines based on the FIRST value.
Example text file contents:
values;data
5.01 100
2.9 342
2.69 43534
10.1 43
6.8 45324
Output: Text file containing
2.69 43534
2.9 342
5.01 100
6.8 45324
10.1 43
It's easy to do this if there was only 1 number on each line, but I do I sort all the lines based on the first number in each line?
How can i delete a line from a file created using a C++ program?Can i get a code sample.
View 1 Replies View RelatedThe program i wrote can run but did not work. I want to delete a line from the textfile "StaffList.txt" but when i cin the name, for example "Ben". After the program ran finished and i open the textfile, the name "Ben" and the whole line is still inside the textfile! I have created the "temp.txt" file before i run the program.
//information inside the "StaffList.txt"
James S1325685J12580
Peter S8856325K52650
Ben S1025639Z85250
Ken S9052365B74100
Marry S9352654I75320
John S7754852H99630
Jenny S7042525L74530
May S1256985G15960
Betty S1135565K56360
Kyle S9545530A1234100
[code]....
I need to store the last 3 deposit that I have in my deposit. I have few option but i dont which would be easy
1.Store all deposit to the text file (store always in a new line), and display the last three deposit from the text file.
dep 1 - 60
dep 2 - 40
dep 3 - 100 print 100
dep 4 - 50 print 50
dep 5 - 50 print 50
2. I think this option is more difficult, when it reach deposit 4, to get rid deposit 1
So when i make a deposit 4, the deposit 1 get's ride
dep 2 - 50
dep 3 - 100
dep 4 - 70
Right now i can only display one deposit (last one), then i close the program and run again and i make another deposit it overwrites a new deposit.
My code.
To show sure my deposit that has been made.
double depSave () {
int option;
float dep1,dep2,dep3;// Declare your variables
dep1 = dep2 = dep3 = 0; // Set them all to 0
system ("cls");
string path = "deposit.txt"; // Storing your filename in a string
[Code] ....
Where is says "save deposit" in comment that where it saves to the deposit text file, that going to be output to the depSave function.
I am making a script to read the latest from a text file. It picks up the line by numbytes in fseek, but the data line may vary and numbytes not be accurate, how can I fix this?
And another problem is that the line has, date, time, value, separated by space, how to read that line and put these 3 information in variable?
#include <stdio.h>
#include <conio.h>
int main() {
FILE *arq;
char Line[100];
char *result;
int tam, i;
// Opens a file for READING TEXT
arq = fopen("temp.txt", "rt");
[code].....
I'm trying to make a simple phonebook app that can show contacts, add, and delete. I'm pretty new to C++ and fstream functions, deleting a line in my bool erase() function?
#include <iostream>
#include <conio.h>
#include <string>
[Code].....
I have a text file like this
0 1 2 C
10 1 2 S
7 1 2 C
11 1 2 S
9 3 43 C
10 3 43 S
1 3 43 C
101 3 43 S
with this code
ifstream in("fout2.txt");
if (in) {
vector<string> lines;
string line;
while (getline(in, line))
[Code] ....
I obtain this result
0 1 2 C
1 3 43 C
10 1 2 S
10 3 43 S
11 1 2 S
101 3 43 S
7 1 2 C
9 3 43 C
but i want a result like this :
0 1 2 C
1 3 43 C
7 1 2 C
9 3 43 C
10 1 2 S
10 3 43 S
11 1 2 S
101 3 43 S
I have attached the file that I need to read into a data structure. In the example I am just printing it to the screen. This following code has worked for me before, but now isn't. I have tried in visual studios, and on unix, and neither are running it. I ultimately need it to run on unix.
Example file:
word
book
programming
Here is my function to read in the file.
ifstream file;
string line;
file.open("words.txt");
if(file.is_open()){
while(!file.eof()){
getline(file, line);
cout << line <<endl;
}
}
file.close();
I am writing a program for AES Encryption which is all but done as far as that the program encrypts the text and prints the encrypted text in the command prompt:
void main() {
int a;
unsigned char CipherKey[16] = {0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C};
unsigned char PlainText[16] = {0x32, 0x43, 0xF6, 0xA8, 0x88, 0x5A, 0x30, 0x8D, 0x31, 0x31, 0x98, 0xA2, 0xE0, 0x37, 0x07, 0x34};
for(a=0;a<16;a++)
[Code] ....
Encrypted text output on command prompt = 39 25 84 1d 02 dc 09 fb dc 11 85 97 19 6a 0b 32
However, my project asks to "read blocks of data from a data file". Therefore I need to alter the main function to read the following arrays from a data file.
Unsigned char CipherKey[16] = {0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C};
unsigned char PlainText[16] = {0x32, 0x43, 0xF6, 0xA8, 0x88, 0x5A, 0x30, 0x8D, 0x31, 0x31, 0x98, 0xA2, 0xE0, 0x37, 0x07, 0x34};
Firstly, I don't know how to take each individual part in the data file to store into each byte in the array i.e. 0x2B into CipherKey[0] of the array.
Secondly, How do I deal with the fact that each byte is in hexidecimal? How should my data file look?
this is what my data file Input.dat looks like at the minute:
0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C
0x32, 0x43, 0xF6, 0xA8, 0x88, 0x5A, 0x30, 0x8D, 0x31, 0x31, 0x98, 0xA2, 0xE0, 0x37, 0x07, 0x34
The first line being the CipherKey array and the second being PlainText. I'm not sure if the '0x' or the commas are required.
I basically want to take the data from a file, store them in arrays in the program itself, encrypt the Input array PlainText and create a new file with the encrypted output array stored in it (I will deal with this part of the program after I get the input file done first).
Why this code outputs 7 lines (the last line twice) while the file contains 6 lines?
cout << "read msgfile
";
ifstream msgfile ("script1.msg");
while (msgfile.good()) //if not at end of file, continue reading {
// load vector with deffile
msgfile >> line;
vectormsgfile.push_back (line);
cout << line << "
";
}
msgfile.close();
I'm reading from stdin a line. With that line, I should open a new textfile with the first letter of that line on a certain directory. My code is the following :
Code:
int main() {
char line[BUFSIZ];
FILE *ptr_file;
int x;
while(fgets(line,BUFSIZ,stdin) != NULL){
[Code] ....
char caminho[] is the directory in which I want to create the text file and chave will be the first letter of the line in stdin.
How am I supposed to use strcat to get these two together in a string to then use ptr_file =fopen(caminho, "w");
I build this function in my C++ code. I run the on a UNIX box, build HTML file to use in Windows.
In HTML file building code, I have only a string variable hold the contents of this text file (from unix) & add it into HTML file.
The issue is that when I view the HTML file on windows, it shows all the lines in the text file as one line. I think it lost the CRLF.
My question is when I add lines from text file (reading one line at a time) in UNIX, how do I maintain CRLF ( ) in the stringstream variable so that it will display on HTML in Windows properly, all the lines as it is in unix.
I am aware UNIX uses for line end.
string TextFileToString(string filename) {
string line;
stringstream dosString;
ifstream inFile;
[Code] ......
I'm trying to make a program that will search for a line in a text file using a non default delimitor at the start of the line. An example line in the text file would be as follows:
F Mary Smyth, 19, United Kingdom
I have been able to use the find function to search for and return the 'F' character but would like it to then display the whole corresponding line. Is this possible with the find function?
ifstream readFromFile("data.txt");
string Destinations[1] = {"F "};
string data;
while(!readFromFile.eof()){
getline(readFromFile,data);
[code]...
I am working on a project for school that has us read in a text file that contains 8 lines of SSN and grades. I am not sure how to go about reading in the lines and differentiate between the SSN and grades in the calculations.
View 1 Replies View RelatedI tried to read in a file that contain studentId(8 integer long) and GPA in the same line separated by a comma, but I couldn't. Example:
145453565, 4.0
34344443, 3.9
23454345, 3.4
12345678, 3.4
void studentRecord::loading(string filename) {
ifstream infile;
int studentId;
double GPA;
[Code] ....
