I am working on a project for school that has us read in a text file that contains 8 lines of SSN and grades. I am not sure how to go about reading in the lines and differentiate between the SSN and grades in the calculations.
View 1 Replies
I have attached the file that I need to read into a data structure. In the example I am just printing it to the screen. This following code has worked for me before, but now isn't. I have tried in visual studios, and on unix, and neither are running it. I ultimately need it to run on unix.
Example file:
word
book
programming
Here is my function to read in the file.
ifstream file;
string line;
file.open("words.txt");
if(file.is_open()){
while(!file.eof()){
getline(file, line);
cout << line <<endl;
}
}
file.close();
Why this code outputs 7 lines (the last line twice) while the file contains 6 lines?
cout << "read msgfile
";
ifstream msgfile ("script1.msg");
while (msgfile.good()) //if not at end of file, continue reading {
// load vector with deffile
msgfile >> line;
vectormsgfile.push_back (line);
cout << line << "
";
}
msgfile.close();
I tried to read in a file that contain studentId(8 integer long) and GPA in the same line separated by a comma, but I couldn't. Example:
145453565, 4.0
34344443, 3.9
23454345, 3.4
12345678, 3.4
void studentRecord::loading(string filename) {
ifstream infile;
int studentId;
double GPA;
[Code] ....
I am suppose to make a program that will output a line for a specific age group,but everytime I execute the exe file it gives me the desired line and also the last line included everytime.Where did I go wrong with it including the last line everytime?
#include <iostream>
using namespace std;
int main() {
double age;
cout<<"Enter your age:";
cin>>age;
if (0<age && age <6)
[Code] ......
The program runs fine but i just want it to read the inputs from a text file rather than user manually entering it! what changes should i make in the codes..
Code:
#include<iostream.h>
#include<stdio.h>
#include<conio.h>
#include<math.h>
float friction,flow;
[Code] ....
I am trying to read numbers stored in a txt file to populate an integer array. The problem is that the numbers read from a file have to be treated as strings and then I am not able to put them in an integer array.
I tried the stoi function to convert the string in 'box' into an integer but I am getting an error.
Code:
#include <iostream>
#include <stdlib.h>
#include <fstream>
#include <string>
using namespace std;
int main() {
int amount=10;
int k[amount];
[Code] ....
I am trying to read a file line by line and then do something with the informations, so my method looks like this:
Code:
void open_file(char *link) {
FILE *file = fopen(link, "r");
if (file == NULL) {
fprintf(stderr, "Could not open file.
");
exit(EXIT_FAILURE);
[Code] ....
1) The first complain of valgrind is at the line where I use fgets and its telling me (invalid write of size x), but I have allocated my line to 56000 and the read line is shorter, why is there a write size error then :S?
2) at the line where I realloc where I try to shrink the space he's telling me: Address .... is 0 bytes inside a block of size 56000, But I know i need only this space so why is there a write over space error :S??
So I'm reading a file line by line and storing it backwards into a list. So if the file has has this format...
1
2
3
4
The code should store each line in a list as such...
4, 3, 2 ,1
Instead the code will store the last variable in all nodes. So the final list will look like this...
4, 4, 4, 4
Here is my code...
struct node *head = NULL;
int i;
while(read(in, &i, sizeof(int)) != 0) {
struct node *temp = malloc(sizeof(*temp));
temp->line = &i;
temp->next = head;
head = temp;
}
This is about reading a "txt file" and storing the contents in a variable. But i've got problems with it because normally, it is space delimited, that is, values separated by spaces are considered different values. How am I going to make C++ read the whole line including spaces?
View 14 Replies View RelatedIm trying to read from a file, line by line, with no specified number of values in the file. Check out my code:
int main() {
string x;
ifstream fin;
int count = 0;
char ch;
fin.open("CWC_Master.txt");
if(!fin)
[Code] .....
Now, this works great! However, its skipping some lines. And I dont know why. For example: Lets say that the input file is:
superman toy
sm2335
19.99
batman toy
bm5532
25.99
aquaman toy
am6786
26.00
Where it should output the above, instead it outputs every other one. Like:
superman toy
19.99
batman toy
25.99
aquaman toy
26.00
How can I fix my code so that it SIMPLY(i say simply because I am still a beginner coder) can read line by line?
I have to read the information about logic gates from a file. The file format is shown below:
Code:
gateOne = NAND(inpA, inpB)
gate2=NAND(1,2)
3 = NAND(23,25,26)
As, it can be seen from the above structure that whitespaces are not same everytime. So, to deal with this situation, i am using boost library to remove all whitespaces from the line which is being read and then try to find the name of gate and its input. My code is given below which is able to correctly find the gate names and its first input...but my code is not able to find the second, third and so on input names.
Code:
//C
#include <stdio.h>
//C++
#include <iostream>
#include <sstream>
#include <fstream>
#include <string>
#include <cstring>
#include <boost/algorithm/string/erase.hpp>
[Code] ....
How to read a file line by line and then later access them by doing something like
Code:
lines[0] //Line number one
...
lines[100] //Line number one hundred and one
lines[100][0] //L
lines[100][1] //i
lines[100][2] //n
lines[100][3] //e
lines[100][4] //
lines[100][5] //n
...
I have a text file (test.txt) with the following data:
01,05,25,20130728
01,06,25,20130728
01,07,25,20130728
01,08,25,20130728
01,05,25,20130728
01,05,25,20130728
01,05,45,20130728
01,05,65,20130728
01,05,85,20130728
01,05,35,20130728
01,05,25,20130728
01,05,35,20130728
I want to read this to one string called line. So far I have this code:
string line;
ifstream myfile ("/home/Test.txt");
if (myfile.is_open()) {
while (myfile.good()) {
getline (myfile, line);
for (int a = 0; a <= 335; a++) {
cout <<line.at(a);
} }
myfile.close();
}
so far its only printing the first line and then throwing an instance of 'std::out_of_range'
I can able to get the last line ten chars but i cant get if the last line is null.
here is my code
#include <cstdlib>
#include <iostream>
#include <fstream>
#include <sstream>
#include <string>
using namespace std;
int main(int argc, char *argv[]) {
[Code] ....
here with i have enclosed my file where i am pick my last ten chars ...
Attached Files : log.txt (4.8 KB)
I'm trying to add line numbers to a text editor I'm building but not having much luck. I'm trying to find a way around building something massive with a picture box next to my textbox etc. I'm tried adding VS Basic to my references and searching for the linenum_rtf.cs but I can't seem to find it under existing items.
View 4 Replies View RelatedFirst of all I need to know how to read from file.
Second, I need to read line by line from the file.
For example, the file contains:
8H 3S TH 9D 5S
5D KD 9H 4D 3D
8C TD 5D QS 2C
I wanna use array, so I need to store 8H in array[0], 3S in array[1], until 5S get stored in array[4].
I need to read the first line, the the second, and then the third.
so the data file is a .txt that is going to be pre-written like this:
numbers:
562
444223.123321 312233.31222 3232323.31122
332231.323223 333232.32323 3232322.32233
am i reading the txt correctly? why are the numbers so weird when i "cout" to check?
#include <iostream>
#include <cmath>
#include <cstdlib>
#include <fstream>
#include <sstream>
#include <ctime>
#include <stdlib.h>
using namespace std;
int main() {
double mb1; //mass body 1
[code]....
I currently need separating my Prime numbers in group for my assignment. I absolutely do not know how to do this. I am able to find out if the number I used is prime and see how many prime number there are between 1-100 and then 1-1000 (168 primes) and so on. The thing that I need to do is find the number of prime numbers between 101-200, 201-300, 301-400, and so on until 901-100 and have it show on screen. Here is the exact assignment that I’m supposed to find out:
Assignment:
Write a C++ program to calculate and display the number of primes from 1 to 100,000, separated in groups of 100, 10 groups per line. To be more precise, on the first line of output, display the number of primes between 1 and 100, 101 and 200, etc., up to 901 to 1000. Then display the average primes per group. For example, there are 168 primes from 1 to 1000, so the average number of primes per group of 100 (or percentage) is 16.8. Then repeat the process for the groups of 100 between 1001 to 1100, 1101 to 1200, etc., for all groups of 1000 all the way up to 100,000. Your results should be as presented below, under testing.
Testing:
The output of your program should be the following, according to my calculations. Each group (g1, g2, etc.) is the number of primes in a group of 100 numbers. For example in line 1, g1 is the group from 1 to 100, g2 is the group 101 to 200, etc. For line 2, g1 is the group 1001 to 1100, g2 is 1101 to 1200, and g10 is the group from 1901 to 2000.
g1 g2 g3 g4 g5 g6 g7 g8 g9 g10 Average Primes
----------------------------------------------------------------
25 21 16 16 17 14 16 14 15 14 16.8 for 1 to 1000
16 12 15 11 17 12 15 12 12 13 13.5 for 1001 to 2000
14 10 15 15 10 11 15 14 12 11 12.7 for 2001 to 3000
12 10 11 15 11 14 13 12 11 11 12.0 for 3001 to 4000
…
…
…
7 10 5 10 7 11 7 6 11 8 8.2 for 97001 to 98000
7 5 9 9 11 8 7 8 12 11 8.7 for 98001 to 99000
8 11 8 8 7 9 8 10 10 8 8.7 for 99001 to 100000
Total number of primes from 1 to 100000: 9592
Average primes per 1000: 95.92
Percentage of primes from 1 to 100000: 9.59
Here is my code that I have done so far:
#include <iostream>
#include <string>
#include <cmath>
using namespace std;
bool isPrime(long candidate);
long primeCount (long start, long end);
[Code] ....
how to read the next line in the file. I think I need to use a for loop, but not sure how to implement it.Lets say my input.txt file has three names:
Sally
Tom
Sugar
I can get Sally, but not tom as yet. fgets also gets me to the same place.
Code:
int main(){
char str_1;
FILE * ifp = fopen("input.txt", "r");
fscanf(ifp, "%s", &str_1);
printf("%s", &str_1);
return 0;
}
My file has these lines.I try to remove extra line in the end, in notepad/gedit, however, after saving it automatically adds up there.
one
two
three
Code:
void help::read_ref(const char* file_name){
std::ifstream file_handle;
file_handle.open(file_name);
std::string line,name;
getline(file_handle,line);
while(!file_handle.eof()){
[code]......
when I print size of map, it comes out to be an extra then what is should be.
std::map<std::String,std::string> ->is my map
on the contrary if I use Code: file_handle >> line; I get correct number of entries in map.
My doubt: getline, automatically finds and in last, it finds a , why it doesn't end the iteration?
I have faced this issue many number of times.
Code: line[0]=='>' I am making this check, then also, I get a null string as key in my map.
I have printed key with their index, using Code: map iterator .
I'm currently working on making a program that is run through a GUI run through the command line. The program basically takes an app file and a boot file and runs it through a bunch of functions and generates a new outfile. Anyway I'm new to C and can't figure out how to code it so I can type the two file paths into the command line and read them into the function. Is it possible to do this within the "if else" statement?
Code:
int main(int argc, char *argv[]){
const char * const SrcFilePath;
const char * const SRecordPath;
const char * const FopIspFilePath;
[Code] ....
finding the last line of the code? I have a program with two functions that open and display a joke.txt and punchline.txt file. My joke function (which reads the entire file) works fine. The punchline function, however, does not.
void displayPunch(fstream &file)
{
char ch;
string fileLine;
bool isLine = true;
file.seekg(0L, ios::end);
while(isLine)
{
file.seekg(-1L, ios::cur);
[code]....
The file, punchline.txt, has a bunch of garbage strings with one real string at the end. I need extract and display only the final line of that file.
I know how to do it in C, but in C++?
Here is my code. Let the variables be of type double.
Code:
while(infile) // Will read the last line twice
{
if(!N)//Read first line of file
{
infile >> d;
infile >> N;
infile >> epsilon;
infile >> t;
[Code] .....
i would like to read the content of a text file data.txt (line by line ) directly from the command line using this command: a.exe < data.txt.
What could be the c++ code to read/get the content of these lines (without using ifstream). The treatment of the lines is not a problem for me but i really don't know how to access the content of the file from the c++ code
My question is how can i read one line from a ".txt" file? To be more clear, i'm trying to write a hangman game. Therefore I'm trying to get words from a "wordlist.txt" file i created. I know a little bit about ifstream, ofstream and fstream. So my function i created to get a random line from this txt (not-completed yet since i don't know how to get that randomized line);
void grw() {
int line;
srand (time(NULL));
line = (rand() % 7972) + 1;
ifstream wordlist;
wordlist.open("wordlist.txt");
}
I created a variable called 'line' for the line number and randomized it (there are 7972 words in ".txt" file). So what i want to do now is to get the word on that line.
