I tried to read in a file that contain studentId(8 integer long) and GPA in the same line separated by a comma, but I couldn't. Example:
145453565, 4.0
34344443, 3.9
23454345, 3.4
12345678, 3.4
void studentRecord::loading(string filename) {
ifstream infile;
int studentId;
double GPA;
[Code] ....
I just wrote a code that reads in a text file called "policies.txt" which looks like this:
Pol1 M N 20 100000 1 .04 99
Pol2 F S 30 100000 1 .05 99
Pol3 M S 72 750000 1 .03 99
Pol4 F N 45 1000000 1 .05 99
This works perfectly fine, but what if I want each element of the table to be separated by commas. For example:
Pol1,M,N,20,100000,1,.04,99
Pol2,F,S,30,100000,1,.05,99
Pol3,M,S,72,750000,1,.03,99
Pol4,F,N,45,1000000,1,.05,99
or better yet, what if I want it to not matter whether the columns are separated by commas or spaces? is there any way to do this? If there is no way to read in both comma-separated and space-separated elements simultaneously then I would prefer just comma, rather than the space separated which my code is able to read now. What modifications would I have to make to my code to make this work? This is my code to reference.
double ratesmn[86] = {
#include "MaleNonSmoker.txt"
- 1
};
double ratesms[86] = {
#include "MaleSmoker.txt"
[Code] ....
I am attempting to read in a file that has 4128 sets of 21 numbers separated by commas and write it into an array. I now know that in order to use fseek, I have to make my array a character array, but I need my function to read in decimals (ex: 0.172635). I'm reading in
0.102598,0.000000,0.000000,0.000000,0.000000,0.307 793,0.000000,0.410391,0.102598,0.000000,0.102598,0 .102598,0.000000,0.000000,0.102598,0.102598,0.8207 83,0.000000,0.000000,0.000000,0.000000
and keep getting numbers like 48 49 50.
Code:
void CSread(char filename[100], char array[22], char array2[22], unsigned int arraysize)
{
char genename[32];
double temp = 0;
FILE *CSfile;
CSfile = fopen(filename, "r");
");
[code].....
I'm trying to enter an 'x' and 'y' coordinate on only one line separated by a comma. But I keep getting a syntax error. Here are the lines of code I'm using. This has to be simple. What am I doing wrong with this code?
Code:
cout<< "Please enter the x and the y coordinates of the first point,"<<endl;
cout<< "use a comma to separate them. " <<endl<<endl;
cin>> "You entered: " >>x1>>",">> y1 >>"for the first point" >>endl;
I'm trying to read names separated by a comma using array.
For example, the expected input would look like the following:
Juila,Francisco
Adams,Wong
I know you can use getline function and set the delimiter to comma. So like ....
getline(cin, lastName, ','); getline(cin, firstName);
But the program only read the last name and ignore the firstname.
I have been trying to read a comma separated .txt file into an array and print it to console in C++. The txt file consists of two columns of double type data. For some reason the program runs, but gives blank output in the console. I want to know if I am doing something wrong. So far this is what I have:
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
int main() {
int i=0;
double x[10];
double y[10];
string line;
[Code] .....
TinyGPS::TinyGPS()
: _time(GPS_INVALID_TIME)
, _date(GPS_INVALID_DATE)
, _latitude(GPS_INVALID_ANGLE)
[code]....
I am wondering about the constructor. I see there appears to be nothing inside of TinyGPS::TinyGPS() as far as parameters go and that that declaration is followed by a ":". First I'm wondering as to the meaning of the colon. As well with the variables defined after the ":" I see some "(0)" and I am wondering as well to the exact meaning of the "(0)". Are those variables being defined as parameters separated by ","?
How to enter person's last name and first name separated by space and comma.
For example henry smith---
Output-->>smith,henry
I have attached the file that I need to read into a data structure. In the example I am just printing it to the screen. This following code has worked for me before, but now isn't. I have tried in visual studios, and on unix, and neither are running it. I ultimately need it to run on unix.
Example file:
word
book
programming
Here is my function to read in the file.
ifstream file;
string line;
file.open("words.txt");
if(file.is_open()){
while(!file.eof()){
getline(file, line);
cout << line <<endl;
}
}
file.close();
Why this code outputs 7 lines (the last line twice) while the file contains 6 lines?
cout << "read msgfile
";
ifstream msgfile ("script1.msg");
while (msgfile.good()) //if not at end of file, continue reading {
// load vector with deffile
msgfile >> line;
vectormsgfile.push_back (line);
cout << line << "
";
}
msgfile.close();
I am working on a project for school that has us read in a text file that contains 8 lines of SSN and grades. I am not sure how to go about reading in the lines and differentiate between the SSN and grades in the calculations.
View 1 Replies View RelatedI have a file with data in lines separated by commas and im trying to print out specific lines and specific parts of data from that line. I need to isolate lines where the first column of data reads '$CPGAR' and print out specific data columns.When I print out the strings I get random data and my strcmp to isolate lines isnt working? Im very new to this, heres a sample of my program:
while (!feof(gpsH)) {
char word1[10],word2[10],word3[10],word4[10],word5[10],word6[10],word7[10],
word8[10],word9[10],word10[10],word11[10],word12[10],word13[10];
char a[6] ="$CPGAR";
/* read data line */
fgets(gpsS,10,gpsH);
[Code]...
I am trying to read a file line by line and then do something with the informations, so my method looks like this:
Code:
void open_file(char *link) {
FILE *file = fopen(link, "r");
if (file == NULL) {
fprintf(stderr, "Could not open file.
");
exit(EXIT_FAILURE);
[Code] ....
1) The first complain of valgrind is at the line where I use fgets and its telling me (invalid write of size x), but I have allocated my line to 56000 and the read line is shorter, why is there a write size error then :S?
2) at the line where I realloc where I try to shrink the space he's telling me: Address .... is 0 bytes inside a block of size 56000, But I know i need only this space so why is there a write over space error :S??
So I'm reading a file line by line and storing it backwards into a list. So if the file has has this format...
1
2
3
4
The code should store each line in a list as such...
4, 3, 2 ,1
Instead the code will store the last variable in all nodes. So the final list will look like this...
4, 4, 4, 4
Here is my code...
struct node *head = NULL;
int i;
while(read(in, &i, sizeof(int)) != 0) {
struct node *temp = malloc(sizeof(*temp));
temp->line = &i;
temp->next = head;
head = temp;
}
This is about reading a "txt file" and storing the contents in a variable. But i've got problems with it because normally, it is space delimited, that is, values separated by spaces are considered different values. How am I going to make C++ read the whole line including spaces?
View 14 Replies View RelatedIm trying to read from a file, line by line, with no specified number of values in the file. Check out my code:
int main() {
string x;
ifstream fin;
int count = 0;
char ch;
fin.open("CWC_Master.txt");
if(!fin)
[Code] .....
Now, this works great! However, its skipping some lines. And I dont know why. For example: Lets say that the input file is:
superman toy
sm2335
19.99
batman toy
bm5532
25.99
aquaman toy
am6786
26.00
Where it should output the above, instead it outputs every other one. Like:
superman toy
19.99
batman toy
25.99
aquaman toy
26.00
How can I fix my code so that it SIMPLY(i say simply because I am still a beginner coder) can read line by line?
I have to read the information about logic gates from a file. The file format is shown below:
Code:
gateOne = NAND(inpA, inpB)
gate2=NAND(1,2)
3 = NAND(23,25,26)
As, it can be seen from the above structure that whitespaces are not same everytime. So, to deal with this situation, i am using boost library to remove all whitespaces from the line which is being read and then try to find the name of gate and its input. My code is given below which is able to correctly find the gate names and its first input...but my code is not able to find the second, third and so on input names.
Code:
//C
#include <stdio.h>
//C++
#include <iostream>
#include <sstream>
#include <fstream>
#include <string>
#include <cstring>
#include <boost/algorithm/string/erase.hpp>
[Code] ....
How to read a file line by line and then later access them by doing something like
Code:
lines[0] //Line number one
...
lines[100] //Line number one hundred and one
lines[100][0] //L
lines[100][1] //i
lines[100][2] //n
lines[100][3] //e
lines[100][4] //
lines[100][5] //n
...
I have a text file (test.txt) with the following data:
01,05,25,20130728
01,06,25,20130728
01,07,25,20130728
01,08,25,20130728
01,05,25,20130728
01,05,25,20130728
01,05,45,20130728
01,05,65,20130728
01,05,85,20130728
01,05,35,20130728
01,05,25,20130728
01,05,35,20130728
I want to read this to one string called line. So far I have this code:
string line;
ifstream myfile ("/home/Test.txt");
if (myfile.is_open()) {
while (myfile.good()) {
getline (myfile, line);
for (int a = 0; a <= 335; a++) {
cout <<line.at(a);
} }
myfile.close();
}
so far its only printing the first line and then throwing an instance of 'std::out_of_range'
I can able to get the last line ten chars but i cant get if the last line is null.
here is my code
#include <cstdlib>
#include <iostream>
#include <fstream>
#include <sstream>
#include <string>
using namespace std;
int main(int argc, char *argv[]) {
[Code] ....
here with i have enclosed my file where i am pick my last ten chars ...
Attached Files : log.txt (4.8 KB)
I have prepared a file through the use of following code
Code:
fprintf(file2, "%i %i %i %i %i %i
",
msg_id,
msg_size,
msg_period,
msg_deadline,
msg_producer,
msg_comsumer
);
As one can see, this file has tab separated integer entries. The file is written correctly, let us call this file "msg.txt".
I face the problem when I read this file, using fgets as follows:
Code:
char singleMessage[100];
while( fgets(singleMessage, sizeof(singleMessage), file ) )
{
puts(singleMessage);
sscanf(singleMessage, "%i %i %i %i %i %i
",
&first, &second, &third, &fourth, &fifth, &sixth);
fprintf(stderr, "first: %d, second: %d, third: %d, fourth: %d, fifth: %d, sixth: %d
",
first, second, third, fourth, fifth, sixth);
}
but fgets only retrieves until the first, i.e, if the first line in the file reads:
788004425
fgets returns only 78.
Does it have to do with how the file was written in the first place.
First of all I need to know how to read from file.
Second, I need to read line by line from the file.
For example, the file contains:
8H 3S TH 9D 5S
5D KD 9H 4D 3D
8C TD 5D QS 2C
I wanna use array, so I need to store 8H in array[0], 3S in array[1], until 5S get stored in array[4].
I need to read the first line, the the second, and then the third.
how to read the next line in the file. I think I need to use a for loop, but not sure how to implement it.Lets say my input.txt file has three names:
Sally
Tom
Sugar
I can get Sally, but not tom as yet. fgets also gets me to the same place.
Code:
int main(){
char str_1;
FILE * ifp = fopen("input.txt", "r");
fscanf(ifp, "%s", &str_1);
printf("%s", &str_1);
return 0;
}
My file has these lines.I try to remove extra line in the end, in notepad/gedit, however, after saving it automatically adds up there.
one
two
three
Code:
void help::read_ref(const char* file_name){
std::ifstream file_handle;
file_handle.open(file_name);
std::string line,name;
getline(file_handle,line);
while(!file_handle.eof()){
[code]......
when I print size of map, it comes out to be an extra then what is should be.
std::map<std::String,std::string> ->is my map
on the contrary if I use Code: file_handle >> line; I get correct number of entries in map.
My doubt: getline, automatically finds and in last, it finds a , why it doesn't end the iteration?
I have faced this issue many number of times.
Code: line[0]=='>' I am making this check, then also, I get a null string as key in my map.
I have printed key with their index, using Code: map iterator .
I'm currently working on making a program that is run through a GUI run through the command line. The program basically takes an app file and a boot file and runs it through a bunch of functions and generates a new outfile. Anyway I'm new to C and can't figure out how to code it so I can type the two file paths into the command line and read them into the function. Is it possible to do this within the "if else" statement?
Code:
int main(int argc, char *argv[]){
const char * const SrcFilePath;
const char * const SRecordPath;
const char * const FopIspFilePath;
[Code] ....
finding the last line of the code? I have a program with two functions that open and display a joke.txt and punchline.txt file. My joke function (which reads the entire file) works fine. The punchline function, however, does not.
void displayPunch(fstream &file)
{
char ch;
string fileLine;
bool isLine = true;
file.seekg(0L, ios::end);
while(isLine)
{
file.seekg(-1L, ios::cur);
[code]....
The file, punchline.txt, has a bunch of garbage strings with one real string at the end. I need extract and display only the final line of that file.