So, I'm relatively new to programming.
I want to create a loop (for, while, do while) which can run the Collatz Conjecture when I give it any number.
The Collatz Conjecture consists of two functions (3n+1 for odd numbers and n/2 for even numbers) and it states that when applied to any positive number, the outcome will ultimately be 1. think of a loop/pseudocode to apply to this.
I have to write a program that uses negative numbers in a conjecture algorithm. The program terminates when a number is reached that was already outputted. I can not get it to work and I have been racking my brain for a week.
#include <iostream>
using namespace std;
int main() {
int x[1000], y[1000], i=0, j=0, count=0, w=0, z[1000], t = 0;
[code]....
what i think i need to create 2 int for the FOR loop to do the encryption but how am i to do it meaning the actual encryption itself what is that i check with?Also i think i need more than just the #include <stdio.h> library due to the file functions that i will need or is C having them built in? Also what is that about the program doing all this from DOS?
Create 2 programs with the names encrypt and decrypt that will encrypt and decrypt files respectively.The encryption and decryption will be done through a command line of DOS and the program should be as follows: encrypt file1 file2 key and decrypt file1 file2 key
Where:
file1 is the source file
file2 is the destination file
key is the word with which we encrypt/decrypt file1
So when the user executes the command encrypt f1 f2 sunnyday the program will create a file with the name f2 which will have the contents of f1 encrypted with the key sunnyday.When the user executes the command decrypt f1 f2 sunnyday the program will create a file with the name f2 which will have the contents of f1 decrypted with the key sunnyday.
If the user gives a wrong key the program will continue to decrypt file1 but since the key is wrong the results will be unexpected.Finally the program must print the corresponding error messages in case of errors for example (There is no file 1).The program is expected to work corectly with not only plain text files but executable (exe) files etc.Also The program must be fully commented.
Note: The way the encryption will work is yours to choose but it is recommended that you encrypt every letter of the file with every letter of the key with the (start to finish and begin) technique meaning that if the key has 8 letters then the first leeter of the file will be encrypted with the first letter of the key, the second letter of the file with the second of the key, ..., the ninth letter of the source file with the first letter of the key, the tenth letter of the source file with the second letter of the key etc.
In order to create 10 different zipcode where should i put the loop I tried put loop at every function it does not work and I tried put under the main method it create exactly 10 same zipcode here is my coding only create one zipcode
#include <iostream>
#include <stdio.h>
#include <stdlib.h>
#include <ctime>
#include <cmath>
using namespace std;
class Zipcode {
[Code] ...
I create a loop that would repeat itself many times a second? Trying to do extremely basic graphics with a grid and system("cls") every time I run a command, but it still looks very jumpy. I realize system calls are evil. Any way to get rid of this too.
View 1 Replies View RelatedI want to create a specific number of for loops each in another loop, as in example:
for(i=0;i<9;i++)
{
for(j=0;j<9;j++)
{
for(k=0;k<9;k++)
{
//some stuff
}
}
}
In this example there are 3 loops, but what if i want to create e.g. 10 such loops, and program reads a number of loops from a txt? It is needed for checking numbers.
I need to create a loop to return a minimum value using a boolean variable but don't quite understand how to format my algorithm.
#include <iostream>
using namespace std;
int main() {
bool first = true;
while (first) {
cout << "Enter a number (X to exit): ";
int num;
[Code]....
I know its jacked up any comments in the code would be great I need to finish the program but also understand it.
This is probably a very basic question, but I need to create two vectors and then loop through the vectors and output each pair that is found.
The user will input min1 and max1 with step1 for the first vector and min2 and max2 and step2 for the second vector. Then the loops will go through and return the combinations will return each pair of the two vectors.
So if I input min1=1 and max1=10 and step1=1 and same for vector two the return would be:
[1,1]
[1,2]
.
.
.
[10,10]
This is for part of a homework assignment, but I can't continue on the assignment without first getting this simple part to work.
I have a struct called Array and I'm to create a function to create a dynamic array that's fill with randomly generated integers from 0 to 50 (inclusive) and a function to destroy the array for freeing its memory. Below the code that I have written so far.
Code:
* Struct */
typedef struct {int *pArray; //the dynamic array
int length; //the size of the dynamic array}Array;
/* Function to create a dynamic array */
Array *initializeArray (int length) {int i;
}
[code]....
I need to create a project that create a automated backup of a file.
i will get the file from C:/Folder/file.exe and move for a other created folder, but.. in every time that user make this backup, a folder will be created with year, month and date, like: C/Folder2/2014/April/16:42/file.exe.
We are making a program--but every time we input a value for scanf, the following for loop does not work and the program quits without displaying the for loop's function. We are not getting any errors.
View 11 Replies View RelatedI have tried to submit this topic before but i didn't submit my whole code and it was removed. So here it is. All I am trying to do is load form2 from form1 then back to form1 from form2 for a certain number of times the get out of the loop. I am new to C-Sharp and it seems as though I cant seem to figure out a way to do this.
Here is form1 and form2 code. I have commented out a few things I have tried.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
[Code]....
Code:
#include <stdio.h>
#include<ctype.h>
void try5t(){
char choice;
int choiceint;
[Code] .....
Loop is repeated an additional time as shown in the screenshot:
For my data-structures class, I am attempting to create a binary search tree template to be used to create an AVL tree. I've written a Generic_Tree template for the BST to inherit from, and before I jump into implementing the AVL tree I'm testing the BST member functions. Everything was compiling fine until I added the BST insert() function. Now, I'm getting the following error message from my linker:
undefined reference to 'BST<void>::insert(int, void*)'
Stemming from the call in main line 16.
my makefile compiles with:
g++ -Wall -g Generic_Tree.cpp BST.cpp barfing.cpp main.cpp
Generic_Tree:
template < typename NODE_DATA, unsigned MAX_KIDS >
class Tree {
protected:
struct NODE {
NODE_DATA* contents;
Tree* child[MAX_KIDS];
Tree* parent;
[Code] ....
I'm use to c and havn't used classes or templates before (except for declaring instances of them). The whole syntax is mystifying to me,.
Given a for loop:
int i;
for(i = 0; i < 1000; i++)
;
How many nanoseconds, or microseconds or milliseconds does it take for each iteration? And why do some use it as a timer mechanism?
I already made a nested for loop into a while loop (below this) and now I'm trying to make the outer for loop into a do while loop, but it's not working.
#include <iostream>
using namespace std;
int main () {
int len;
int j;
int i;
[Code]....
And I can't make this code do the same thing. It stops after one loop, instead of continuing to the end. Why won't the loops continue?
#include <iostream>
using namespace std;
int main(){
int len;
cout << "Enter a number: ";
[Code] ....
I need to convert the following while loop:
count = 1;
while (caloriesForItem != 0, count != numberOfItems )
{
cout<<"Enter the calories: ";
cin >> caloriesForItem;
totalCalories += caloriesForItem;
count++;
}
This is what I have come up with:
totalCalories += caloriesForItem;
for (count = 1; caloriesForItem != 0; count != numberOfItems)
{
cout<<"Enter the calories: ";
cin >> caloriesForItem;
count++;
cout << "Total calories eaten today = " << totalCalories << endl;
}
However the output is not the same?
I've been programming for a while but. I've never made or used a DLL before.
Edit: In eclipse.
I have an assignment that asks me to implement a variant of the classic bouncing balls program.
'Each ball should start off at the top of the screen with a random speed in the x direction. Whenever a ball hits a screen boundary it should bounce off at an angle equal to the impact angle and lose some speed. Eventually each ball should come to a rest at the bottom of the screen. Five seconds after coming to a rest a ball should be removed from the screen.'
'Your code must keep track of objects (balls) by placing the object data structures in a linked list. You need to create your own linked list implementation. Below is a brief description of the object programming interface: CreateObject - Create a new object. The function accepts as input parameters a pointer to the SDL screen, a pointer to a model triangle array, and a variable telling the size of the model triangle array. The function returns a pointer to a new object data structure. The model triangle array specified as input parameter should not be shared across objects. (Not sharing the model triangle array allows e.g. objects to have different colors.)
Perform the necessary memory allocation and copying.DestroyObject - Free object. The function accepts as input parameters a pointer to an object data structure. The function should free all memory allocated to represent the object (memory allocated for the model triangle array and the object data structure itself).
Drawobject - Draw object on screen. The function accepts as input parameters a pointer to an object data structure. The function must draw the object on the screen by calling DrawTriangle on each of the model triangles. Remember to update scale, translation, etc., in each triangle data structure before invoking DrawTriangle.
Hint: Do not make the bouncing algorithm too complex. Bouncing a ball off a vertical or horizontal surface can be accomplished without resorting to calculating impact angles.'
The function I'm stuck at, is the first one - createobject.
My first aim is to get one ball on the screen.
Code:
// Create new object
object_t *CreateObject(SDL_Surface *screen, triangle_t *model, int numtriangles)
{
object_t *object = malloc(sizeof(object_t));
object->model = malloc(sizeof(sphere_model));
object->screen = SDL_Surface;
memcpy(*model, object->model, sizeof(object_t));
return object;
// Implement me
}
This is what I've done so far.
I am trying to create a box outside my 9x9 array. However, my box did not cover up everything.
Code:
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <conio.h>
#define row 19
#define col 19
[Code] ....
I need to create a UML class diagram for this code
private:
GradedActivity *grades[NUM_GRADES];
public:
void setLab(GradedActivity *activity)
{ grades[LAB] = activity; }
#include<iostream.h>
#include<time.h>
#include<conio.h>
[Code].....
I'm trying to make a database that stores the information without overwrite it. I want this program to store the client’s selection in somewhere that doesn't change and also that creates a new storage for the new value any time the client enters a new selection instead of overwriting it. I did something like that in my code but any time the program runs again and the client enters a new selection, the client’s selection is overwritten with the new value. I don’t know if it’s possible to do that (store the client’s selection in somewhere where doesn't change) with C++. I've been reading and I think I can create a database for my program.
THIS IS MY CODE:
#include <iostream>
#include <string>
using namespace std;
// FUNCTIONS
[Code]...
I'm trying to find out how to create and use DLL's in eclipse.
I know general C++, library but i cannot figure out DLL's.
How to create a folder in mfc ..
View 1 Replies View RelatedI am trying to create a OCX from a C++ dll., Here's the scenario I have a C++ dll and this dll needs to be called in VB.net program my boss want's me to create an OCX out of this.
C++ dll and use it in a VB.net class library, apparently I have created an OCX but it requires a form but the VB.net program is a class library.