I create a loop that would repeat itself many times a second? Trying to do extremely basic graphics with a grid and system("cls") every time I run a command, but it still looks very jumpy. I realize system calls are evil. Any way to get rid of this too.
View 1 RepliesRepeat the vowel Problem 3 (0 / 0)Write a program that will repeat k times each single occurrence of a vowel in the input file "sp.txt" to a new file "output.txt". The first line of the input file contains only the parameter k. The first line (containing the parameter k) should not to be written in the output file.
I wrote the code but i cant figure out something. i read the file, i found the vowels but then i cant print them.
Code:
#include <stdio.h>#include <string.h>
#include <ctype.h>
#define MAX 100
int checkvowel(char c)
[Code].....
So I have a programming assignment.
Code:
#include <stdio.h>
int main(void)
{
int input;
int sum;
int i;
int t;
[Code] .....
So you input an integer ex) 30
the printing of t =(i+i)+1 and i++ is carried out until i=30, which is when the sum of all the t's is printed.
If the value you entered is not an integer, the loop ends.
I'm supposed to do this with one while loop, and no more. I can't use the for loop either.
How can I do this?
How can i repeat a loop based on the number inputted by the user?
View 4 Replies View RelatedI have been trying to make a program that asks for username and password, and if it is wrong it will loop back to the top. But i only want it to loop a set number of times, how can i do this? This is my code so far
string username;
string password;
cout << "Enter username: ";
getline(cin, username, '
[Code] ....
Assume all variable are declared correctly, the following for loop executes how many times?
for (i = 0; i <= 20; i++)
cout << I;
I think 20 but am not sure.
I tried my best but I can't figure out the problem. At the last part of "createArray", I output the final array created. I mean it to repeat once but then it repeat more times than I expect. createArray is an iterative function. If it repeats 3 times, than at last the array created which fulfil the criterion would be printed out 3+1 times.
I am trying to create an array with 3 numbers 5 times, resulting in a 2D array. The 3 numbers in a array are picked from 0 - 5. I enter createArray(5,3,5). Then these 5 arrays are compared with each other to see if there are repetitions. If there are, the whole process begins again, 5 arrays with 3 numbers each will be picked again and compared with each other. If there are no repetitions at last, there 5 arrays would be printed out.
void deleteArray(int** array){
delete[] array;
}
int** createArray(int simu_times, int randomrun,int numberofrun){
vector<Int_t>fChosenRun;
int** Array = new int*[simu_times];
[Code] ....
I'm having trouble getting my loop to work correctly. If I iterate the for loop once it works as expected and displays proper output. When I try to iterate two times or more the program gets stuck in an infinite loop.
testData8.dat:
Code:
12 9
13 756
The function uses a "for" loop to print the given character the number of times specified by the integer.
How can I make a for loop to do that?
So.. my code looks like this:
// cpp : Defines the entry point for the console application
//
#include "stdafx.h"
#include <iostream>
using namespace std;
void printMyInteger(int myInteger, char myChar) {
[Code] ....
So.. here is my error:
Error1error C2143: syntax error : missing ';' before ')'d:workspaceuniversity ools for games and animationworkshopsweek 6week 6week 6week 6.cpp101Week 6
Error2error C2143: syntax error : missing ';' before ')'d:workspaceuniversity ools for games and animationworkshopsweek 6week 6week 6week 6.cpp101Week 6
3IntelliSense: expected an expressiond:workspaceuniversity ools for games and animationworkshopsweek 6week 6week 6week 6.cpp107Week 6
I am writing for loop with a switch so that scores can be inputted in by a judge. The issue that I am running into is that I will put out an the text then the test happens and the code puts out the switch statement 5 times with random number. Here is what I have written.
Code:
int main() {
int diver;
int option;
int Judge;
cout << "Enter Divers Name:";
[Code] ....
what i think i need to create 2 int for the FOR loop to do the encryption but how am i to do it meaning the actual encryption itself what is that i check with?Also i think i need more than just the #include <stdio.h> library due to the file functions that i will need or is C having them built in? Also what is that about the program doing all this from DOS?
Create 2 programs with the names encrypt and decrypt that will encrypt and decrypt files respectively.The encryption and decryption will be done through a command line of DOS and the program should be as follows: encrypt file1 file2 key and decrypt file1 file2 key
Where:
file1 is the source file
file2 is the destination file
key is the word with which we encrypt/decrypt file1
So when the user executes the command encrypt f1 f2 sunnyday the program will create a file with the name f2 which will have the contents of f1 encrypted with the key sunnyday.When the user executes the command decrypt f1 f2 sunnyday the program will create a file with the name f2 which will have the contents of f1 decrypted with the key sunnyday.
If the user gives a wrong key the program will continue to decrypt file1 but since the key is wrong the results will be unexpected.Finally the program must print the corresponding error messages in case of errors for example (There is no file 1).The program is expected to work corectly with not only plain text files but executable (exe) files etc.Also The program must be fully commented.
Note: The way the encryption will work is yours to choose but it is recommended that you encrypt every letter of the file with every letter of the key with the (start to finish and begin) technique meaning that if the key has 8 letters then the first leeter of the file will be encrypted with the first letter of the key, the second letter of the file with the second of the key, ..., the ninth letter of the source file with the first letter of the key, the tenth letter of the source file with the second letter of the key etc.
In order to create 10 different zipcode where should i put the loop I tried put loop at every function it does not work and I tried put under the main method it create exactly 10 same zipcode here is my coding only create one zipcode
#include <iostream>
#include <stdio.h>
#include <stdlib.h>
#include <ctime>
#include <cmath>
using namespace std;
class Zipcode {
[Code] ...
So, I'm relatively new to programming.
I want to create a loop (for, while, do while) which can run the Collatz Conjecture when I give it any number.
The Collatz Conjecture consists of two functions (3n+1 for odd numbers and n/2 for even numbers) and it states that when applied to any positive number, the outcome will ultimately be 1. think of a loop/pseudocode to apply to this.
I want to create a specific number of for loops each in another loop, as in example:
for(i=0;i<9;i++)
{
for(j=0;j<9;j++)
{
for(k=0;k<9;k++)
{
//some stuff
}
}
}
In this example there are 3 loops, but what if i want to create e.g. 10 such loops, and program reads a number of loops from a txt? It is needed for checking numbers.
I need to create a loop to return a minimum value using a boolean variable but don't quite understand how to format my algorithm.
#include <iostream>
using namespace std;
int main() {
bool first = true;
while (first) {
cout << "Enter a number (X to exit): ";
int num;
[Code]....
I know its jacked up any comments in the code would be great I need to finish the program but also understand it.
I'm having a little trouble writing program that on remove all repeat characters and leave only the non repeated characters. This is want I have so far.
#include <iostream>
#include <cstring>
#include <string>
unsigned repeatingCharCount(char const* s) {
std::string unique ;
const unsigned length = std::strlen(s) ;
[Code]...
How can I get the array to repeat itself after it hits 9?
So like this 0,1,2,3,4,5,6,7,8,9,0,1,2,3,4,5,6,7,8 and so on?
#include <iostream>
using namespace std;
int main() {
const int arraySize = 20;
int arr1[arraySize] = {0,1,2,3,4,5,6,7,8,9};
[Code] ....
I created a very basic program which contains a vector (my vector) that holds 0, 1 and 1. This program compares each element in the vector. If the element after the one currently being compared is equal to it, it outputs "repeat found!" Now this all works perfectly, but my next step was to erase the repeated one. Everything was working up until the delete step. I get a weird error that says "vector iterator not dereferencable" .
// vector::begin/end
#include <iostream>
#include <vector>
using namespace std;
int main () {
vector<int> myvector;
[Code] ....
everything works it just how am i repeat for the next word not exiting the program.
// Word Jumble
// The classic word jumble game where the player can ask for a hint
#include <iostream>
#include <string>
#include <cstdlib>
#include <ctime>
using namespace std;
int main() {
enum fields {WORD, HINT, NUM_FIELDS};
[Code]...
I have a method that changes a canvas color after set intervals, e.g. start timer, 5 seconds green, 3 seconds red, then stop. This functionality is provided in the interval method. The problem I'm trying to achieve is getting this sequence to repeat for a set number of iterations.
I tried to solve this by setting up a counter after the timer is stopped but the code keeps repeating indefinitely by starting and stopping over and over instead of the max of 6 iterations I had set. In debugging the problem, I watched the value of 'i' and when the 'if' statement is set to false. The 'if' statement gets set to false after 7 iteration as expected but the start(); keeps getting called.
void myTimer_Tick(object sender, EventArgs e) {
//Assign text box string value to a time span variable.
TimeSpan workTm = TimeSpan.ParseExact(wrkString, @"hh : mm : ss : fff", CultureInfo.InvariantCulture);
TimeSpan restTm = TimeSpan.ParseExact(rstString, @"hh : mm : ss : fff", CultureInfo.InvariantCulture);
// update the textblock on the display
// with hh, mm, ss, ms
ms = myStopwatch.ElapsedMilliseconds;
[Code] .....
I have a structure for 4 divisions, and can't figure out how to loop through it.
So I ended up writing everything for times.
If I had 500 divisions I wouldn't be able to get away with it!
How can I have the structure in array form so I can fill it via looping?
/*Headers*/
#include <iostream>//needed 4 input/output
#include <iomanip>//needed to round
#include <string>//needed 4 strings
using namespace std;//global namespace to avoid name clash
struct division {
[code].....
Here is my code for a simple game. paste it and try it.
#include <iostream>
#include <string>
#include <ctime>
#include <cstdlib>
using namespace std;
int main (void) {
stringg[4],
[code]...
What they do (enter 4 actions)?
";
for (int ai = 0; ai < 4; ai++)
getline(cin, a[ai]);
cout << "
Where is happening (enter 4 locations)?
";
for (int li = 0; li < 4; li++)
getline(cin, l[li]);
for (int c = 0; c < 4; c++)
cout << g[rand() % 4] << " and " << b[rand() % 4] << " are " << a[rand() % 4] << " from a " << l[rand() % 4] << endl;
return (0);
}
At the end in the 4 lines some of the names, actions and locations repeat. How do I make them to not repeat and use every name that you will enter? do I need random_shuffle? How can I integrate it in my code?
I have an array matrix called tmat,,and i know that in every row of tmax there are values which repeat two times...and am writing a code to extract the values WHICH DOES NOT REPEAT into another matrix called tcopy...the codes compiles fine...and it writes nicely to file...but without the desired result...
One last question...how can i get the array tcopy written to file in the form 5x3...and not all the figures in line one after the other? i mean i wish to see the matrix like a matrix on file..not like a list of numbers....
Code:
#include <iostream>
#include <fstream>
#include <vector>
using namespace std;
const int R = 5;
const int C = 5;
[Code] ....
Write a program which is used to calculate GPA based on the grades from different courses Input by the user. User should be able to enter as many course unless they choose to quit. Once the user has completed entering the data, the program should be able to provide a feedback on the GPA. Where A=4, B=3, C=2, D=1.
View 1 Replies View RelatedThis is probably a very basic question, but I need to create two vectors and then loop through the vectors and output each pair that is found.
The user will input min1 and max1 with step1 for the first vector and min2 and max2 and step2 for the second vector. Then the loops will go through and return the combinations will return each pair of the two vectors.
So if I input min1=1 and max1=10 and step1=1 and same for vector two the return would be:
[1,1]
[1,2]
.
.
.
[10,10]
This is for part of a homework assignment, but I can't continue on the assignment without first getting this simple part to work.
I've got most of the program to work but its printing to the screen 5 times and I only want it to print once.
Eg:
cos1512: 57.00%
mat1512: 86.50%
inf1520: 65.10%
cos1521: 78.40%
inf1505: 89.10%
but I get:
Semester Marks:
================
cos1512: 57.00%
mat1512: 57.00%
inf1520: 57.00%
cos1521: 57.00%
inf1505: 57.00%
cos1512: 86.50%
.....
My code:
#include <iostream>
using namespace std;
class Module {
public:
void setModules(string module1, string module2, string module3, string module4, string module5);
void setMarks(int aMark1, int aMark2);
int updateMarks();
[Code] .....