I tried to add 2 or more strings together but failed.
eg I would like to add "KK" & "LL" together by adding but it couldn't work.
string string_B = "KK";
string string_C = "LL";
string_A = string_B + string_C;
I was trying to solve a problem that required to add one hundred 50 digit numbers. Since there is no way to hold such a huge number. I read that storing them in strings is the way to go. I was caught midway while trying to do the same.
Here's the source code;
Code:
#include<stdio.h>
#include<string.h>
const char * addTwoStrings(char *number1,char *number2)
}
[code]...
And the text file is this. Code: 123465789 321654987 This isn't the exact huge number, but I wanted to try it out with lower number before trying out with the original huge ones.I am trying to store the numbers in a two-dimensional array. However when I and try to pass the single number as an parameter to the AddTwoStrings() method, It actually passes the entire number as such.
When I pass string[0],string[1] it should pass the first and second number from the files as the two numbers instead of the whole number as such.The function AddTwoStrings() doesn't do anything as of now, I encountered this error when I was testing the code till this part.
I'm trying to write an algorithm for a larger project that will take two strings which are both large integers (only using 10 digit numbers for the sake of this demo) and add them together to produce a final string that accurately represents the sum of the two original strings. I realize there are potentially better ways to have gone about this from the beginning but I am supposed to specifically use strings of large integers as opposed to a long integer.
My thinking was to take the two original strings, reverse them so their ones position, tens position, and so on all line up properly for adding. Then one position at a time, convert the characters from the strings to single integers and add them together and then use that sum as the ones position or otherwise for the final string, which once completed will also be reversed back to the correct order of characters.
Where I'm running into trouble I think is in preparing for the event in which the two integers from the corresponding positions in their strings add to a sum greater than 9, and I would then have carry over some remainder to the next position. For example, if I had 7 and 5 in my ones positions that would add to 12, so I would keep the 2 and add 1 to the tens position once it looped back around for the tens position operation.
I'm not getting results that are in any way accurate and after spending a large amount of time stumbling over myself trying to rectify my algorithm, I am not sure what I need to do to fix this.
#include <iostream>
#include <cstdlib>
#include <string>
[Code]....
You will have two file streams: an input file stream for the file to be normalized and an output file stream that contains the normalized file. You should issue an error message and exit the program if either file cannot be opened. Your program should prompt the user for the filename of the file to be normalized (the input file). The output filename should be the input filename with ".normal" added to it. For example, if the input file is "data.txt", the output file name will be "data.txt.normal".
Be careful to not leave an extra blank line at the end of your output file.
My question here is how do I rename the file that the user entered to have a ".normal" at the end of it? I was thinking along the lines of having to string names and changing the second string's name and use that as the output file. any examples cause I didn't exactly get that to work.
#include <iostream>
#include <fstream>
#include <string>
[Code]....
I was given a project to program a library catalog. One of the aspects is that we have to allow an administrator to add, modify, and delete books from the catalog. It was recommended to me to use vectors. So I initialized by hand a default book list, and now I want to be able to have an adminisistrator add books and then print the modified book list. Here is what I have got:
main () {
char yesorno;
string bookname;
vector<string> books;
[Code].....
I need to make a small program with a function with this prototype: void f(char *a,char *b) that adds two numbers represented as strings without using conversion operators or other tricks.
View 8 Replies View RelatedI just wanted to add strings in any base form (example 1101+100 = 10001 in base-2 but it could be added using any base-form like in base-3 to base-36) and I'm having a big trouble with my code because it gave me incorrect results.
addition(char st[], char st2[], int base){
int i, j, carry = 0, ans, len, o=0, z=1, l=0;
char final[50];
if(strlen(st)>=strlen(st2))
len = strlen(st);
else
len = strlen(st2);
[Code] ....
I am programming a translator, and I have it so that it detects words with spaces both in front of and behind them, so I did "string.append(space);" where space equals " ". That added a space to the end, but I still need a space added to the front.
View 1 Replies View RelatedI have a problem who must print the sentences who have lenght more than 20 characters. I dont know why, but it prints just the first words. Look what i made.
#include<stdio.h>
#include<conio.h>
int main()
[Code]....
For instance :
Give the number of sentences : 3
First sentence : I like the website bytes.com
Second sentence : I like more the website bytes.com
Third sentence : bytes.com
After I compile the program it should print the first two sentences.
Every time I run if(color=="1") it's supposed to add 1 to redTotal. However, every time I run if(color=="1") if get 1 for redTotal every time.
(Write a program that provides the option of tallying up the results of a poll with 3 possible values. The first input to the program is the poll question; the next three inputs are the possible answers. The first answer is indicated by 1, the second by 2, the third by 3. The answers are tallied until a 0 is entered. The program should then show the results of the poll—try making a bar graph that shows the results properly scaled to fit on your screen no matter how many results were entered.)
Code:
#include <iostream>
#include <string>
using namespace std;
int main()
[Code]....
I am new to c and I have come across a problem when adding other functions to a programme and printing the values. The question I am attempting to solve is :
The following function computes ex by summing the Taylor series expansion to n terms. Write a program to print a table of ex using both this function and the exp() function from the math.h library, for x = 0 to 1 in steps of 0.1. The program should ask the user what value of n to use.
double taylor(double x, int n) {
int i;
double sum = 1.0;
double term = 1.0;
for (i=1; i<=n; i++) {
/*Or we could have written: */
term = term * x / i; /* term *= x / i; */
sum = sum + term; /* sum += term; */
}
return sum;
}
My code is
Code:
#include<stdio.h>
#include<stdlib.h>
#include<math.h>
/*Taylor series for e*/
[code]....
code prints out the values for exp, but it gets stuck in the Taylor function and I'm not sure how to solve it.
So here is what i need i need a way i can add 3 variables one after the other example:
int a = 1;
int b = 2;
int c = 3;
//Here comes my problem
int d = a + b + c;
When I write it like thet d = 6 ,
but I need it to be 123,
int sum=82;
for(int i; i < sum.length; i++)
{
final=sum[i]+final;
}
I need getting the sum and adding the numbers together. for example 82 would be 8+2. I keep getting an error on this piece of code....
How would one add each value from an array? I'm working from a string but I was wondering if there was a way to loop through the string and add each value. This is what I have so far:
#include <iostream>
#include <cmath>
#include <string>
int main() {
std::string numbers;
int sum;
[Code] ....
I have the following code in sourceFile.cpp. functionA() is first called and inserted entires for key1, key2 and key3. Then functionB() gets called to use the vectors for the 3 keys. I want to free all memory after exiting functionC(). Among the three ways to put an entry into the map for the 3 keys, which is correct / better?
Class ClassA { ... }
ClassA *key1 = new ClassA();
ClassA *key2 = new ClassA();
ClassA *key3 = new ClassA();
[Code]....
Currently in development of a cookie clicker clone (for fun)
I am stuck at the idea of the "Cookies Per Second" thing.
Is there a way to implement a per second adder thing that doesnt actually effect the game play (eg even though the player may not be pressing C every second a cookie (or more) will be added, or if they can press C more than once a second, every second a cookie will be added... If you get what I mean).
Code is below if you would like to look />
MAIN.cpp
#include <iostream>
#include <conio.h>
#include <Windows.h>
#include "Shop.h"
#include "Varis mate.h"
[Code] .....
I need to input values for two arrays and then add the two with all of it being print visible. I have this so far but can not figure out how to add the two arrays.
#include <iostream>
using namespace std;
int main ()
{
{
int const ROWS = 3;
int const COLUMNS = 3;
int square[ROWS][COLUMNS];
[Code] .....
'm new to programing and I'm trying to get this program to add up a price of coffee to the add on extras such as cinnamon, etc. But once the program runs it doesn't add up the coffee price with the extras and I've been at it for hours...
Code:
#include <iostream>
#include <cstdlib>
using namespace std;
int main()
[Code] ......
This is my code without malloc. I need to change the array size so there is no max size for each matrix. I must dynamically allocate space for all arrays used. So I need to use malloc to create my arrays. So I cant use int A[rows][cols].
Code:
/* This program asks the user for 2 matrices called A and B, as integers, and displays their sum, C. The max dimension of each matrix is 100. */
#include<stdio.h>
// Construct function
void construct()
{
int m, n, i, j;// Variables
int first[100][100], second[100][100], sum[100][100];// Matrices variables
[Code]...
Im having a hard time understanding/using malloc. Should first, second, and sum be single pointers or double? How do I scan the matrix correctly? And how do I add them properly? Do I have to change my for loops?
Code:
/* This program asks the user for 2 matrices called A and B, as integers, and displays their sum, C. The max dimension of each matrix is 100. */
#include <stdio.h>
#include <stdlib.h>
// Construct function
void construct()
[Code]...
I am currently working on a program and Originally I was to create a bash program to extra information from youtube and create a table of users, views, titles, duration, etc. (I sent each to a txt file)..Then I was to create a C program to use the extracted information. In this case Users and read in the conents of user.txt and construct a linked list to hold the information. Then print from the Linked list.I managed to do that,
Code:
#include<stdio.h>
#include<stdlib.h>
#include<string.h>
#define LINE_LENGTH 100
void build_a_lst(), print_a_line(), print_lst();
void insert_at_end();
}
[code]...
What I have to do now is start reading in The other files and construct a table. And radix sort it by views. But to get to the radix sort part I get stuck on reading in all the files correctly and having the linked list hold them. I keep getting seg faults when I change my code.
I'd like to add a 'command' to my C program. For example if someone types 'get out' it closes the shell and quits. I want the 'get out' command to work like 'exit'. How do I write a code like this
Code:
char entry[15];
scanf("%[^
]", &entry);
if (entry = "get out")
do "exit";
I am trying to convert a string Input by user into an unsigned byte array.The data would be in hex form like :- "AE 1F 2C". I am thinking of using strtok to split the string into be " ". and then cast to (unsigned char *) . But for that I''ll have to prefix every element with 0X Is there any convenient way and elegant way to do this?
View 3 Replies View RelatedI am making a text based rpg for school and im having troubles with it. Ineed to add an inventory into my game and im not to sure as to where or how.. this is what i got for player
#ifndef PLAYER_H
#define PLAYER_H
//console Util.h includes <iostream> , <string> and <window.h> and defines
//the NOMINMAX macro. As a result of including ConsoleUtil.h, PLayer will
// also knaow about thoes objects.
#include "ConsoleUtil.h"
[Code] ...
I'd like to use the Big Integer Library [URL], but I have issues to use it. I'm using Xcode as compiler and I don't know how to include the library in my project files. When I drag all the files in the project directory and write the statement #include <BigInteger.hh> on the top of the declaration of the main function, even whiteout any other code, I get lots of build error on the .hh and .cc file.
how to include the library on my project.
I have a basic question regarding 2d vectors. The following code makes a 2d vector and fills it with a matrix of integers. The vector tempVector3 gets added as a new row to the matrix. But what if I wanted to add the tempVector3 as a new column instead. How would this be done in the simplest way?
#include<iostream>
#include<vector>
int main(){
std::vector<std::vector<int>> numbers;
std::vector<int> tempVector1;
tempVector1.push_back(2);
[Code] ....
I am writing a program to list the 8 planets, then you select which planet you want. it gives you the mass of the planet, the radius, then you use the mass and radius of the planet to find the surface area (sphere formula) and the density of the planet. Along with those options, you have to add and delete a planet from the list and then sort them alphabetically. All i am having trouble with is the adding and deleting part. The code the adding and deleting from the list would go in cases 9 and 10.
heres my code as of this point.
#include <iostream>
#include <cmath>
#include <vector>
#include <algorithm>
#include <set>
using namespace std;
void print(const std::string& item) {
[Code] ....
