Code:
// declaration
template<class T>
class GetValue {
void Initialize(std::string fileName);
};
[Code] ....
I understood that GetValue<D3DXVECTOR3>::Initialize was not defined.
How can I reuse the GetValue::Initialize method in every derived classes from GetValue, such as GetD3DXVECTOR3, GetD3DXMATRIX, GetOpenGLVector3 etc ...
Assignment: Design a class to store measurements. The class should have two data items, feet and inches, both integers. The class must make sure that the number of inches never gets below zero or above 11. If inches is outside that range, adjust feet accordingly. (Yes this means feet might be a negative number.)
Create a default constructor and one which receives one integer, a number of inches.
Overload the following operators: addition, subtraction, equality, inequality, incrementation (both pre and post) (should add one to inches), and output (in the form of: F’I”)
Code:
#include <iostream>
using namespace std;
class measurements {
private:
int inches;
double feet;
[Code] ....
I am getting a LNK2019 error and an LNK1120 errors:
Error 1 error LNK2019: unresolved external symbol _main referenced in function ___tmainCRTStartup
Error 2 error LNK1120: 1 unresolved externals
My code won't run properly. The error says unresolved externals.
#include <iostream>
#include <cstring>
using namespace std;
char again;
void reverse(char*);
[Code] ....
I am trying to add in a few 3rd party libraries to an existing project solution. I have no source code or knowledge on how the libraries were built (i.e. what run-time library was used). I have recieved the following errors and warnings:
1>CAPS_LIB.lib(PCEfunc.obj) : MSIL .netmodule or module compiled with /GL found; restarting link with /LTCG; add /LTCG to the link command line to improve linker performance
1>libcmt.lib(getenv.obj) : error LNK2005: _getenv_s already defined in MSVCRT.lib(MSVCR90.dll) ***There are multiple of these errors
1>LINK : warning LNK4098: defaultlib 'MSVCRT' conflicts with use of other libs; use /NODEFAULTLIB:library
1>MSVCRT.lib(cinitexe.obj) : warning LNK4098: defaultlib 'libcmt.lib' conflicts with use of other libs; use /NODEFAULTLIB:library
1>libcmt.lib(crt0.obj) : error LNK2001: unresolved external symbol _main
1>C:Program Files (x86)BCI 2000 v3progRelWithDebInfo..CAPSVRInterface.exe : fatal error LNK1120: 1 unresolved externals
CAPS_LIB.lib is one of the libraries I am trying to add in and it seems to be the one causing the problem. I believe I have added in all three libraries into the project solution correctly, but I can't seem to find a solution to these errors.
I'm getting unresolved link errors when I attempt to compile.
dNode.h
#ifndef DNODE_H
#define DNODE_H
template <class T>
class dNode {
[Code] ....
ERROR:
Error1error LNK2019: unresolved external symbol "public: __thiscall dStack<double>::dStack<double>(void)" (??0?$dStack@N@@QAE@XZ) referenced in function "void __cdecl stack_test(void)" (?stack_test@@YAXXZ)main.objprog09
Error2error LNK2019: unresolved external symbol "public: virtual __thiscall dStack<double>::~dStack<double>(void)" .......
When I compile the program, I get errors I've never seen before. Here's my program:
Header File
#ifndef BINARYTREE_H
#define BINARYTREE_H
#include <iostream>
using namespace std;
[Code] ....
And my errors
1>main.obj : error LNK2019: unresolved external symbol "public: void __thiscall BinaryTree<class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > >::insertNode(class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >)"
[Code] ....
My program will not run because of error LNK2028 "unresolved token" and error LNK2019 "unresolved external signal" and I do not know why. My teacher says that I need to make the constructor and display functions display class variables in different formats, but I do not know what to do with that. Here are my 3 files:
Header take 2.h:
#pragma once
#include <iostream>
#include <string>
using namespace std;
class Heading {
private:
string company, report;
[Code] ....
Here are the errors:
Error1error LNK2028: unresolved token (0A0003C9) "public: __thiscall Heading::Heading(void)" (??0Heading@@$$FQAE@XZ) referenced in function "int __cdecl main(void)" (?main@@$$HYAHXZ)c:UsersOwnerdocumentsvisual studio 2012ProjectsClassLibrary2ClassLibrary2Source1.objClassLibrary2
[Code] ....
I'm trying to implement a simple template array class, but when i came into the operator< i actually have to use a template :
my code is something like :
template<typename _Type, std::size_t _Size>
class array {
public :
[Code] ......
but i am having an error of shadows template param 'class _Type' is it w/ the name conflict between the array template parameter and the function template parameter ?
Error1error C2955: 'DoubleLinkedListInterface' : use of class template requires template argument listdoublelinkedlist.h10
Error2error C2244: 'DoubleLinkedList<T>::DoubleLinkedList' : unable to match function definition to an existing declaration doublelinkedlist.cpp7
Error3 .cpperror C2244: 'DoubleLinkedList<T>::~DoubleLinkedList' : unable to match function definition to an existing declaration 12
.h
#pragma once
#include "DoubleLinkedListInterface.h"
#include "Node.h"
#include <iostream>
[Code]....
I have a generic template class with another template in one of its types. Now I want to specialize one of its methods for a particular (template) class, which leads to a compile error, however.
Here is the example:
#include <stdio.h>
template<typename Type>
class Obj1 {
public:
void ID() { printf("Object 1, size = %zu
[Code] .....
GCC ends with:
:35:27: error: type/value mismatch at argument 2 in template parameter list for ‘template<class Type, template<class> class O> class Foo’
:35:27: error: expected a class template, got ‘Obj2<Type>’
What is wrong with the specialization? Can it even be achieved and how (if so)?
how I want the code to look. Only problem is it doesn't work (Line 11). I have some experience with templates but I'm not a pro.
Basically I want the "Channels<3>" to be a type that I can use to specify a Cable with similar to vector<float/int> it would be Cable<Channels<2 or 3>>.
What have I messed up with the syntax?
#include <iostream>
#include <vector>
using namespace std;
[Code].....
I'm trying to create a public and static field in a class called ResourceManager. But when trying to access the field even from inside the class it wont work. I'm getting this error message:
Error 1 error LNK2001: unresolved external symbol "public: static int ResourceManager::num" (?num@ResourceManager@@2HA)
Here's my code:
ResourceManager.h
Code:
class ResourceManager {
public:
static int num;
static void loadContent();
[Code] .....
I'm using Visual Studio 2012.
I have a class like this
PHP Code:
template<class X>
class A {
X m_x;
public:
X* foo();
X* bar();
//others are not related to X
};
I would like to get rid of
PHP Code: template<class X>
For class level but still use it for members. Like this
PHP Code:
class A {
X m_x;
public:
template<class X>
X* foo();
template<class X>
X* bar();
//others are not related to X
};
However, I am still stuck at
PHP Code: X m_x;
Let me put it into the code snippet:
/**
This class build the singleton design pattern.
Here you have full control over construction and deconstruction of the object.
*/
template<class T>
class Singleton
[Code]....
I am getting error at the assertion points when i call to the class as follows:
osgOpenCL::Context *cxt = osgOpenCL::Singleton<osgOpenCL::Context>::getPtr();
I tried commenting assertion statements and then the debugger just exits at the point where getPtr() is called.
How to initialize a static member of a class with template, which type is related to a nested class?
This code works (without nested class):
#include<iostream>
using namespace std;
struct B{
B(){cout<<"here"<<endl;}
};
template<typename Z>
[Code] ,....
I'm making a minimal spanning tree class that inherits a graph class, both are templated. This is my mstree.h so far:
#ifndef _MSTREE_H_
#define _MSTREE_H_
#include "graph.h"
namespace MSTreeNameSpace
[Code]...
and I keep getting these errors:
mst.h:9:25: error: expected template-name before ‘<’ token
class MST : public Graph<T>
^
mst.h:9:25: error: expected ‘{’ before ‘<’ token
mst.h:9:25: error: expected unqualified-id before ‘<’ token
I am trying to pass a class as a type to a template class. This class's constructor needs an argument but I cannot find the correct syntax. Is it possible?
Here is an example of what I described above. I did not compiled it, it is for illustrative purpose only. And of course argument val of the myData constructor would be doing something more useful than simply initializing an int....
template <class T>
class templateClass {
templateClass() {};
[Code]....
My real code would only compile is I add the myData constructor:
myData () {};
and gdb confirmed that it is this constructor that get called, even with dummy(4).
My goal is accessing c++ objects within c by using wrapper and externals. To get the pointer to the c++ object I use a type "void *".
But i get an error while linking: undefined reference to "create_mycpp".
Should I take an other way to access c++ objects?
Code:
//-------------------------------------
//mycpp.cpp
#include "mycpp.h"
Mycpp::void func(int i)
{
i += 1;
[Code] ....
std::cout << "Hello C++ programmers!" << std::endl;
I am trying to create a LinkedList (and then, an ADT stack; // yes, I cannot use the STL stack because the teacher won't let me), and I am getting some weird error when I create a ListNode and declare LinkedList (which has the ListNodes!) a friend of it.
Here is my header-file code for both classes:
ListNode.h
#ifndef LISTNODE_H
#define LISTNODE_H
#include "LinkedList.h"
[Code]...
The errors I am getting are:
error: 'LinkedList' is not a class template
I have tried forward-declaring LinkedList in the ListNode.h file, but I get this error:
error: 'ListNode' does not name a type
Are there any other possible solutions to this problem; // without having to resort to crazy stuff like having a .h file #include a .cpp file, or even declaring and defining ALL OF MY CODE in the .h files???
I have this class templates And This UML.I have to write this function +operator=(source: Array<ElemType, SIZE>): Array<ElemType, SIZE> but I do not know how to start the declaration / or start the function. I have to return a template but I do not know how to do it,
UML
Array<ElemType, SIZE>
-elements: ElemType[SIZE]
+Array()
+Array(source: Array<ElemType, SIZE>)
+operator=(source: Array<ElemType, SIZE>): Array<ElemType, SIZE>
+operator==(other: Array<ElemType, SIZE>): Boolean
+operator!=(other: Array<ElemType, SIZE>): Boolean
<<L-value>>+operator[](index: Integer): ElemType
<<R-value>>+operator[](index: Integer): ElemType
[code]....
I want to use a template function of a class.
This is my code:
#include "Comparison.h"
#include <iostream>
using namespace std;
int main(int argc, char** argv) {
Comparison c;
[Code] ....
But I get the error message:
main.cpp:10: undefined reference to `int Comparison::max<int>(int, int)'
refer to the code below, the attribute class is created with the value type and default value, but why it doesn't work for std::string?
#include <string>
#include <iostream>
using namespace std;
[Code].....
The code below references to a header file and implementation .cpp file, which are not important. My question is what is the proper way to use a constructor in a main file. I have been getting "invalid use of" errors when using letters.Pair(a,b), where Pair(T a, T b) is a constructor that accepts arbitrary type T of variables 'a' and 'b'. So I played around a bit and suddenly found a syntax that works. I need verification for the syntax below:
#include <iostream>
#include "pair.h"
#include "pair.cpp"
[Code].....
Are the comments with the asterisks correct? As in this is always the way you initialize and assign? So letters.Pair(a, b) is not the right way to use constructors?
I have the following class header in library, but when i initialize in main the class, i have an error unresolved external symbols. So the class is not exported as it should.
Code:
template <typename Key, typename Value>
class UTILITIES_EXPORT MyMap : public QMap<Key, Value>
{
public:
MyMap() : QMap<Key, Value>() { }
[Code]....
The following program is designed to demonstrate class templates. The program will evaluate postfix expressions input to the console by pushing them in a stack, and then popping them and evaluating them as such, (ex. entering 3 4 + would equal 3+4 = 7).
The code is below. We are not to modify it, but to fill in the blanks, the places filled in indicated with two asterisks for a line, and one on each side for a part of a line. If I didn't know what to enter (if anything), I put three ?s. If you want to copy and compile for yourself, look for all the *s and ?s.
1) I'm turning up all sorts of errors in the main program file (prog5.cpp) having to do with stacktype.cpp. It has been removed from the program, as it is included at the end of stackType.h. Most of them are "cannot convert 'this' pointer from StackType to StackType<stack> &'. How do I fix that?
2) The program supposedly lacks a default constructor, and it keeps turning up that 's' is an array of unknown size (do I call StackType or stack or what?).
stackType.h Code: #pragma once// Catherine Stringfellow and Trey Brumley
// A Stack is a data type, which stores values in an order where values are added to the top of the stack when pushed,
// and when popped, remove and return the value from the top of the stack.
// Class specification for Stack ADT in file StackType.h
using namespace std;
static const int MAXITEMS = 50;
[code].....
I have a list of numbers in an array created by a class template
Code:
#include <iostream>
#include <fstream>
#include <string>
#include <iomanip>
using namespace std;
const int CAPACITY = 20;
template <class T>
class A
[code].....