C++ :: How To Control Speed At Which A Loop Loops Based On Outside Variable
Feb 20, 2015
I'm using an animation program. In this program I've simulated a particle system. The particles are flying around at different and varying speeds. I've attached birds to the particles and I want to be able to control each bird's flapping animation based on its velocity; so birds moving faster will be flapping faster.
Initially, the bird's flapping animation is controlled by a parameter that goes from 0 to 100%. So not only do I need to drive the speed at which the animation goes from 0 to 100%, I need to set it on a loop so once it reaches 100%, it loops back to 0%. I'm extremely new to code so I don't think it would be wise for me to even provide a jumping off point, not that I could.
View 8 Replies
ADVERTISEMENT
Feb 16, 2014
In Particular:
N3337 wrote:86) this ensures that a top-level comma operator cannot be reinterpreted as a delimiter between init-declarators in the declaration of __range.
What in the world would be a valid example of when this might occur? (IE one that isn't blatantly misusing the quirks of the language).
This topic can also serve as a review topic on this presentation as well: [URL] .....
View 10 Replies
View Related
Aug 7, 2014
explain Range based for loops ?
View 7 Replies
View Related
Oct 22, 2012
Here is an imgur link to my current homework. [URL] .....
As you can see on there I have them listed on which ones are supposed to be sentinel and which ones are supposed to be count control loops. This is currently what I have:
Code:
#include <iostream>
#include <cmath>
#include <iomanip>
#include <fstream>
using namespace std;
void main() {
int count = 0;
int sum = 0;
[Code] ....
This class has me stumped currently and I am having a hard time breezing through the class at my instructors speed. So I don't want to get too far behind.
Right now this program is giving me an error that opens CMD and gives me infinite lines of "0's".
View 14 Replies
View Related
Jan 16, 2013
i have two loops ie.
if (n==null)
{
do loop 1
}
else //(n=!null)
{
do loop2
}
now i have to update the above code, with a single loop ie. when n==null or n!=null do the loop 1
how can i update.?
can i do like this
if(n==null ||n=!null)
{
do loop 1
}
is || operator above does the job what i expected
View 4 Replies
View Related
Apr 25, 2014
(while)
T minus 10 and counting
T minus 9 and counting
T minus 8 and counting
T minus 7 and counting
T minus 6 and counting
T minus 5 and counting
T minus 4 and counting
T minus 3 and counting
T minus 2 and counting
T minus 1 and counting
Declare the following index before the while loop:
int index = 10;
Correctly code a while statement below using the variable index as defined above, to produce the output shown above.
So this is what my code looks like... I also have to convert this same loop into a do while and for loop. So if I can get this one right I think the others should come relatively easy.
while (int index >= 10) {
cout << "T minus " << index;
index--;
}
View 4 Replies
View Related
Apr 10, 2013
Consider:
Code: template<unsigned int N>
class Test
{
private:
[Code]....
I just cannot understand why (clearly, we are calling <0, 0>, not <0, 8>). If I replace "N" with 8, it works as expected (at least for the beginning of the loop). I only tested on MSVC.
View 5 Replies
View Related
Sep 18, 2014
I want to create a specific number of for loops each in another loop, as in example:
for(i=0;i<9;i++)
{
for(j=0;j<9;j++)
{
for(k=0;k<9;k++)
{
//some stuff
}
}
}
In this example there are 3 loops, but what if i want to create e.g. 10 such loops, and program reads a number of loops from a txt? It is needed for checking numbers.
View 2 Replies
View Related
Feb 22, 2012
I'm trying to make a percentage counter inside a loop, printing each completed percent of the loop as it goes. I've managed to write such code, but when I run it the percentage output breaks down (becomes negative!) for large loops. I have an example below.
Code:
#include <iostream>
#include <sstream>
#include <string>
#include <stdlib.h>
#include <stdio.h>
using namespace std ;
int main() {
[code].....
Compiling and running the above yields the output:
Code:
...1% ...2% ...3% ...4% ...5% ...6% ...7% ...8% ...9% ...10% ...11% ...12% ...13% ...14% ...15% ...16% ...17% ...18% ...19% ...20% ...21% ...-21% ...-20% ...-19% ...-18% ...-17% ...-16% ...-15% ...-14% ...-13% ...-12% ...-11% ...-10% ...-9% ...-8% ...-7% ...-6% ...-5% ...-4% ...-3% ...-2% ...-1% ...0% ...1% ...2% ...3% ...4% ...5% ...6% ...7% ...8% ...9% ...10% ...11% ...12% ...13% ...14% ...15% ...16% ...17% ...18% ...19% ...20% ...21% ...-21% ...-20% ...-19% ...-18% ...-17% ...-16% ...-15% ...-14% ...-13% ...-12% ...-11% ...-10% ...-9% ...-8% ...-7% ...-6% ...-5% ...-4% ...-3% ...-2% ...-1% ...0% ...1% ...2% ...3% ...4% ...5% ...6% ...7% ...8% ...9% ...10% ...11% ...12% ...13% ...14%...100%
If I change the value of N to 1e7 instead of 1e8, the output is correct however!
Code:
...1% ...2% ...3% ...4% ...5% ...6% ...7% ...8% ...9% ...10% ...11% ...12% ...13% ...14% ...15% ...16% ...17% ...18% ...19% ...20% ...21% ...22% ...23% ...24% ...25% ...26% ...27% ...28% ...29% ...30% ...31% ...32% ...33% ...34% ...35% ...36% ...37% ...38% ...39% ...40% ...41% ...42% ...43% ...44% ...45% ...46% ...47% ...48% ...49% ...50% ...51% ...52% ...53% ...54% ...55% ...56% ...57% ...58% ...59% ...60% ...61% ...62% ...63% ...64% ...65% ...66% ...67% ...68% ...69% ...70% ...71% ...72% ...73% ...74% ...75% ...76% ...77% ...78% ...79% ...80% ...81% ...82% ...83% ...84% ...85% ...86% ...87% ...88% ...89% ...90% ...91% ...92% ...93% ...94% ...95% ...96% ...97% ...98% ...99%...100%
View 5 Replies
View Related
Sep 8, 2013
I have to write a loop assigning a variable x to all positions of a string variable and I'm stuck. I don't have extensive experience with arrays and I'm also a bit confused about C-String. The problem is below.
"Given the following declaration and initialization of the string variable, write a loop to assign 'X' to all positions of this string variable, keeping the length the same.
char our_string[15] = "Hi there!";
(Please note this is a 'C-string', not C++ standard string.)"
View 5 Replies
View Related
Jan 4, 2013
how to use while loop to control sudden termination program of win32 console application ?
View 1 Replies
View Related
Apr 10, 2013
I would like to try out a range based for loop. I am using gcc 4.6.3. According to the link below, gcc 4.6.3 should allow me to use a range based for loop.
[URL]
However when attempting to run the code below, my IDE (Eclipse) reports the following error:
"error: #error This file requires compiler and library support for the upcoming ISO C++ standard, C++0x. This support is currently experimental, and must be enabled with the -std=c++0x or -std=gnu++0x compiler options:
int a[5] ={1,2,3,4,5};
for (int x : a) {
cout<<x;
}
If gcc 4.6.3 supports range based for loops why do I get this error?
View 1 Replies
View Related
Feb 13, 2013
I am working on my first RPG. Nothing fancy so far... I haven't developed a story or anything, just trying to get the gameplay hammered out. Anyway, I have a couple of NPCs and Items and I was wondering how I should program these interactive spots. I'm unsure whether I should loop the Room info or continue forward with if statements. With Items, I want to prevent the player trying to use the option to get the item again (after you pick up the item, the option is gone. Here are a couple examples of where I have the problem
else if(playerloc == 3)
{
cout << "There is a hooded figure in the corner. "
<< "The person waves you over.
";
[Code]....
What I want to do after the character interaction is complete is continue forward with the option to go south or east. I could return to the room menu, or continue by coding forward and allow the option to go east or south with more if-else-if chains..
In the next bit, I want to program the item to be picked up and then the treasure chest will be empty.
else if(playerloc == 5)
{
cout << "There is a treasure chest in the Northwest corner of this room.
"
[Code].....
View 1 Replies
View Related
Jun 24, 2014
I have one Tab called Tab4 and one main dialog box called CGrabDlg. The values of my variables are not updated when I change them.?
Here my constructor of my Tab :
Code:
CTab4::CTab4(CWnd* pParent /*=NULL*/)
: CDialogEx(CTab4::IDD, pParent )
, iFilter1(_T("F1_350"))
[Code]....
View 14 Replies
View Related
Apr 23, 2014
In the traditional for loop, you could make the loop start again by resetting the int value
for (int i = 0; i < 10: ++i){
//Do something
i =0;
}
Then it would start the loop again. However I can not seem to find a way to do this with the range based for loop. Is there anyway to force a range based for loop to start from, i = 0 ?
for(const auto &i : vec){
//Do something
//Restart for loop
}
View 9 Replies
View Related
Mar 24, 2014
I'm trying to increment the values in a vector, not the vector size, based on variable input. Basically I have a vector of size 10, and all of its values are initialized at zero. The program counts the frequency of numbers 0-9 in a four digit user input. This is what I have (I want it to work so badly but the compiler says that I'm using a pointer to a function used in arithmetic):
for (int i=0; i < num_slots; ++i) {
++guess_frequency[guess[i]];
}
I just want to know if you can increment values within a vector:
E.g.
change
0 0 0 0 0 0 0 0 0 0
to
1 0 0 0 2 0 0 1 0 0
View 6 Replies
View Related
Oct 21, 2014
How can i repeat a loop based on the number inputted by the user?
View 4 Replies
View Related
Sep 27, 2013
Write an interactive text based menu interface (using a loop) that will allow the user to
Enter a task or assignment Display all of the tasks that are in the file Find a task by Course Quit For each task, you need to keep track of:
Course Name that it is for (e.g., CS162)
Description of the assignment (e.g., Finish Lab 2)
Due date (e.g., 9/26/2009)
Allow the program to keep looping until user wants to quit. When the program starts, it should load the tasks from external file ("tasks.txt") into memory. When user enters the three items of a task, the program needs to read them in, save them in memory and eventually write them to the external data file ("tasks.txt"). The file format could look like: (The ';' is used as a delimiter or field seperator.)
Some Implementation Requirements:
Write at least four functions WITH arguments for this assignment. Use struct named Task to model task Use array of structs to model the collection of tasks. Hint: In this assignment, the description and course name may have multiple words in it. Therefore, you now SHOULD read using the 3 argument version of get. Watch out. When using the 3 argument version of get you need to make sure to remove the delimiter or newline. Therefore, anytime you read (even a confirmation message), make sure to eat the newline! Make sure to have a delimiter written between each item in the file – like a newline. This will be important when you read the information back from the file.
This is my code so far:
#include <iostream>
int main()
{
char cname[25],desc[20];
[Code]....
View 1 Replies
View Related
May 24, 2014
I have researched quite extensively, experimented, and still cannot seem to change the properties of a control on an active winform from a user control.
So I have a user control which populates each dynamically added tab page in a tab control.
I have a textbox in the user control which I would like to type in, capture the text_change event, and change the text of the label in the winform.
View 14 Replies
View Related
Apr 25, 2014
How do I bind a DATE column in a DataGridView Control to a DatePicker control (using C#)? I already have the DataGridView control bound to a database stored procedure which takes a DATE value as a parameter and selects joining table based on the results.
View 7 Replies
View Related
Feb 6, 2013
I'm writing a program to sum up the even numbers in between 1 and 100, using a while loop. At the beginning of my program, I initialize a variable "sum" to 0, and a variable "temp" to 1. Afterwards I enter a loop where I determine if "temp" is even or not, and if so add it to sum. However, at the end of my program, when I print "sum", I get a result of 0. Below is my code.
Code:
#include <stdio.h>
int main(void)
{
int sum = 0, temp = 1;
}
[code]...
View 4 Replies
View Related
Jan 19, 2014
for (int raw1=0;raw1<4;raw1++){
for (int column2=0;column2<4;column2++){
unsigned char temp=0x00;
for (column1=0;column1<4;column1++){
int z1=7;
int p1[8]={00000000};
unsigned char temp2;
[Code] ....
When I print the variable output_mix_column inside the for loop as shown in the code, it prints the right output, but when I print it outside the for loop, it changes its value ....
View 1 Replies
View Related
Nov 22, 2014
#include <iostream>
#define show(variable) std::cout << #variable << " = " << variable << std::endl;
class LivingBeing {
protected:
struct Speed {
[Code] ....
Though the above works, memory is being wasted for speed types that do not pertain to many animals (a snail only crawls, a human never flies, etc...). Saving and loading their files will involve a lot of useless zeros. The problem seems simple, but I can't think of a good redesign to encapsulate speed properly for each of the many, many types of animals. Note that main() works with speed from the base class LivingBeing.
Should there be polymorphic Speed types within each Animal subtype? Then there will be a lot of identical Speed subtypes (e.g. many animals can only swim).
Something like:
class AnimalsThatOnlySwimOrCrawl : LivingBeing {
protected:
struct Speed : LivingBeing::Speed {
int swimmingSpeed, crawlingSpeed;
virtual void increase() override {swimmingSpeed *= 2; crawlingSpeed *= 2;}
[Code] .....
View 10 Replies
View Related
Feb 16, 2012
Any example code to convert a velocity vector to speed in C++?
View 2 Replies
View Related
Aug 1, 2013
Code:
#include <stdio.h>
int main(void){
int a=0;
for(;a<=10;)
int b;
return 0;
}
I have got a code like this. I don't expect to get an output but just assumed I would see the command screen until I terminated it. What I want to do is just declare a variable b in a endless loop. But what I got from the compiler is this error: error: expected expression before 'int'. I am using Code::Blocks and I think the compiler is GCC.
View 4 Replies
View Related
Apr 28, 2013
I have a problem with my code which I can't work out:
double Mi = 200*pow(10,30);
cout << "
Enter accreted mass increment in solar masses
";
cin >> dm;
cout << "
[Code] ....
Basically the loop works, but gives the wrong results.
I need, at the end of the loop, to sort of "redefine" Mi as "Mi + Macc". I then need it to repeat the loop, and at the end add another Macc so that Mi becomes "Mi + Macc + Macc", etc.
View 5 Replies
View Related
