Visual C++ :: OnSize Handler Not Working As Expected
Nov 6, 2013
I keep having problems with CMFCPropertySheets. I now have it embedded in a resizable dialog and the property sheet and page gets resized when dialog is resized all that is working fine.
Problem is OnSize is being called when the dialog is being resized NOT when it has finished resizing so the values reported in cx and cy is the old size not the size AFTER resizing. What could be causing this? Isn't OnSize call AFTER the size has been changed and OnSizing called WHILE the size is being changed?
I have a list control that needs to take up full rect in each page and when the dialog is maximized it stays at previous size even though the sheet and page have both maximized as they should.
I ran a trace on the OnSize even for both the sheet and page and OnSize is being called during the sizing and not after it has already been sized like it is supposed to.
View 6 Replies
ADVERTISEMENT
Apr 23, 2013
I have a global var (m) with an initial value 5.
I have a template class (A) that derives from a either a base class that has a member (_A1.m) or not (_A0), based upon it's template parameter. class (A) has a member function (fn) returns the value of (m) as it understands what (m) is.
However, this gives different results compared with a non-template class in a similar scenario. I'm expecting that if derived from _A1, that m should be taken from the base class scope and if derived from _A0, it should be taken from the global one.
Here is the code for your amusement:
int m = 5;
class _A0 {
public:
_A0(int) {
[Code] ....
This compiled using g++ 4.5.3 and 4.6.3 with the same results:
Global value of m is: 5
B0 class has no internal m member. Object resolves m internally with value 5
B1 class has internal m member. Object resolves m internally with value 3
A<_A0> class has no internal m member. Object resolves m internally with value 5
A<_A1> class has internal m member. Object resolves m internally with value 5
View 2 Replies
View Related
Dec 16, 2013
[URL] ....
My calculation function will not work like i wanted it to. It gives me 0 or a crazy number.
this is the function here:
the entire code is on the link:
double calculations(data&avgs) //Calculates the students grade into a final grade
{
int avg1;
int avg2;
int avg3;
int lab1;
[Code] ....
View 12 Replies
View Related
Jan 24, 2014
I use a SEH handler in my code, like this:
__try
{
.. Some codes ...
}
__except(
EXCEPTION_EXECUTE_HANDLER
)
{
TRACE(_T("Exception"));
}
but get the following compiler errors:
1>e: est.cpp(3310): warning C4509: nonstandard extension used: 'CMyClass::Test' uses SEH and 'iterator' has destructor
1> e: est.cpp(3290) : see declaration of 'iterator'
e: est.cpp(3450): error C2712: Cannot use __try in functions that require object unwinding
View 2 Replies
View Related
Oct 8, 2012
I have subclassed CFileDialog. I need to select both file and folder on certain case only. Suppose I have a folder selected and it is containing desired file type. Then in such situation, On clicking open button will not open the selected folder. But just close the CFileDialog with IDOK.
For doing this I need to provide my own implementation for Open button handler. I am not getting how I can do this.
View 5 Replies
View Related
Sep 15, 2014
I have two menu items. When item 1 is disabled, I want item 2 to be disabled as well. In the OnUpdate handler of menu item 1, I have tried to use "t_pMenu = pCmdUI->m_pMenu;", "t_pMenu = pCmdUI->m_pSubMenu;" and "t_pMenu = pCmdUI->m_pParentMenu;" but I always get NULL t_pMenu. How can I achieve this purpose?
Code:
void CDummyView::OnUpdateMenuItem1(CCmdUI* pCmdUI)
{
if(m_bShowMenuItem1) {
pCmdUI->Enable(TRUE);
[Code]....
View 14 Replies
View Related
Dec 4, 2014
I need to set signal handler for my process. As the signal is related with the process on system level I have faced the problem. My program consists several classes. They are connected together. But it doesn't metter in this case. The problem is that I need to access to member and methods of the class from my signal handler. For instance , I have class named Foo at it has some members and methods.
So from my handler I need to call its function and change members. I understand that compiler should know that this class instances will exist during all program execution. I have tried to set static member class Foo instance in another class , but this didn't solve the problem. How to correctly implement signal handling in such case.
Here is example of my code
class MyContainer {
private:
std::vector<Foo> container;
public:
int removeFromContainer(Foo* aFoo) {
[Code] ....
View 1 Replies
View Related
Sep 27, 2012
I'm currently trying to work with more than one form, but I didn't succeed yet. What I need is quite simple: Once the program runs, a small form appears first asking "what would you like to do" with corresponding buttons for each option. Each button loads a new different form for a different task. So basically I need to open and close forms, also having two forms loaded at the same time (pop-up style) would be great for certain purposes.
I still haven't figured how to do it properly. I'm currently using VC++ 2008 and my project is a Windows Forms Application.
View 5 Replies
View Related
Jan 21, 2014
FloodFill is not working. I am using Visual C 6.0 in windows 7 environment. Its not filling a triangle.
My code is:
Code:
void CFloodFillExView::OnDraw(CDC* pDC) {
CFloodFillExDoc* pDoc = GetDocument();
ASSERT_VALID(pDoc);
// TODO: add draw code for native data here
CPoint Pt[7];
Pt[0] = CPoint(300, 400);
Pt[1] = CPoint(200, 300);
[code]....
View 9 Replies
View Related
Dec 4, 2014
I am writing my program on C++ language. I have one promblem. I need to set signal handler for my process. As the signal is related with the process on system level I have faced the problem.
My program consists several classes. They are connected together. But it doesn't metter in this case. The problem is that I need to access to member and methods of the class from my signal handler. For instance , I have class named Foo at it has some members and methods.
So from my handler I need to call its function and change members.
I understand that compiler should know that this class instances will exist during all program execution.
I have tried to set static member class Foo instance in another class , but this didn't solve the problem.
What is correct approach to do this. How to correctly implement signal handling in such case.
Here is example of my code
Code:
class MyContainer{
private:
std::vector<Foo> container;
public:
int removeFromContainer(Foo* aFoo) {
[Code] .....
View 4 Replies
View Related
Feb 3, 2013
Dialogue box in the program is displayed but button will not respond. I created dialogue box using resource wizard,
Code in Resource.rc for dialogue box is generated as below
IDD_DIALOG1 DIALOGEX 0, 0, 131, 69
STYLE DS_SETFONT | DS_FIXEDSYS | WS_POPUP | WS_VISIBLE | WS_CAPTION | WS_SYSMENU
EXSTYLE WS_EX_APPWINDOW
CAPTION "Test dialogue"
FONT 8, "MS Shell Dlg", 400, 0, 0x1
BEGIN
DEFPUSHBUTTON "That is Good",IDOK,30,35,66,25
[Code] .....
View 14 Replies
View Related
Jul 3, 2013
I have a slider control on a dialog box. I am playing a video file and slider moves according to the video elapsed. Suppose I have set the slider range to 100. Now till some point say 90, the slider moves to the point wherever I click the mouse. but at the last point in between some range say 90 - 100 (to the end of the slider), if I click the mouse button anywhere, slider jumps to the end.
I am using a TimeLine control where user can add more than 1 video (1, 2, 4, 8, 10 , 50 etc......), If I use only one video, slider moves as per the video progression.....Issue arises when I add more than 1 video and click on the start button, slider starts moving....Now when I drag the slider to any position or I click the mouse button anywhere on the slider control, slider thumb moves to that position and immediately jumps back to some other position. This is the Issue, I am facing.
share some sample code where slider is moving with the video showing the progress of the video.
I want to implement a functionality similar to VLC player. Wherever user clicks the mouse, slider moves to that point.
View 13 Replies
View Related
Sep 19, 2014
My code is below:
Total Interest ends up as my last Monthly Payment amount instead of adding up all Interest Paid - What am I doing wrong?
Total Paid isn't calculating correcly either - What am I doing wrong?
I suspect both are very similar problems. I've tried several different calculations, but cannot figure this out.
#include <iostream>
#include <cmath>
using namespace std;
double GetMonthlyIntrest (double OpenBalance,double rate);
bool ContinuePgm();
int main () {
double StartingBalance,rate,amount,OpenBalance,IntPmt,TotalInt=0.0,GrandTotal=0.0;
[code]...
View 3 Replies
View Related
Feb 21, 2014
I have a CDHtmlDialog app in which am trying to add a CSS media query in the HTML file as shown below, but it doesn't work.
@media (max-width:20em) {
table, thead, tbody, tfoot, th, td, tr { display:block; }
tr + tr { margin-top:1em; }
}
The same CSS works fine if i open in a browser like IE, FireFox, Chrome. But inside the CDHtmlDialog app this doesn't work.
I am using Visual Studio 2012 for development and have IE 11 installed in my machine.
View 1 Replies
View Related
Sep 22, 2012
The below code is working fine in VS2008 and not working in VC6.0 (taking garbage values) this code is for converting hex values to string.
sending Input string is : 727332333263 required output: rs232c
DWORD AsciiToString(LPCTSTR f_chInputChar, LPTSTR f_chOutputChar) {
long ch;
int i,j;
TCHAR tmp[2];
int len = _tcslen(f_chInputChar);
[Code] ....
View 5 Replies
View Related
Oct 3, 2013
Just using Find in my source code to look for variables or whatever, works once or twice then just stops - Doesn't find anything even if it's there. If I restart VS it works again, but not for long.
View 1 Replies
View Related
Feb 6, 2015
I downloaded Visual Studio 2013 on a new laptop. On my old one I could press things like ctrl + F7 to compile and ctrl + F5 to start without debugging however now it isn't responding when I type those commands. Nothing happens at all. How to change this? I googled "keyboard shortcuts not working in Visual Studio 2013" but per the usual Google comes up with garbage search results that do not pertain at all.
View 1 Replies
View Related
Sep 16, 2014
I can't get tooltips to show up for the windows I want in my CFormView derived class. I have copied the code from the MSDN entry on EnableToolTips(). But only two windows respond with a tooltip:
CONTROL "Tree1",IDC_TESTPLANS,"SysTreeView32",TVS_HASBUTTONS | TVS_HASLINES | TVS_EDITLABELS | TVS_SHOWSELALWAYS | WS_BORDER | WS_HSCROLL | WS_TABSTOP,1,36,85,91
CONTROL "Tab1",IDC_TABCMD,"SysTabControl32",0x0,101,0,239,181
Other windows do not respond. For these windows my function designed to catch the TTN_NEEDTEXTW and TTN_NEEDTEXTA messages is not called. Windows such as
LISTBOX IDC_TESTPLANNAMES,0,119,48,40,LBS_SORT | LBS_NOINTEGRALHEIGHT | WS_VSCROLL | WS_TABSTOP
PUSHBUTTON "",IDC_BTN_COPY,105,177,24,24,BS_ICON
Why wouldn't the messages be sent for those windows? I'm using the code
ON_NOTIFY_EX_RANGE(TTN_NEEDTEXTW, 0, 0xFFFF, &CCntlrView::OnTtnNeedText)
ON_NOTIFY_EX_RANGE(TTN_NEEDTEXTA, 0, 0xFFFF, &CCntlrView::OnTtnNeedText)
(CCntrlView is the name of my class derived from CFormView.) And as I pointed out, I'm using the code straight from the example given in MSDN for CWnd::EnableToolTips(), with the only difference being that all my controls are created in the rc file as shown above.
View 12 Replies
View Related
Mar 18, 2015
I'm having problem using the click event in a web browser control. I have a control called CIEBrowser that implements a Web control. Here a message_map:
Code:
IMPLEMENT_DYNCREATE(CIEBrowser, CWnd)
BEGIN_MESSAGE_MAP(CIEBrowser, CWnd)
ON_COMMAND_RANGE(ID_IEHOME,ID_IESTOP, OnToolBarCmd)
ON_UPDATE_COMMAND_UI_RANGE(ID_IEHOME,ID_IESTOP, OnUpdateToolBarCmd)
ON_NOTIFY_EX_RANGE(TTN_NEEDTEXTW, 0, 0xFFFF, OnToolTipNotify)
ON_NOTIFY_EX_RANGE(TTN_NEEDTEXTA, 0, 0xFFFF, OnToolTipNotify)
END_MESSAGE_MAP()
I want to implement a derived class called CFulltextCtrl.
Code:
IMPLEMENT_DYNCREATE(CFulltextCtrl, CIEBrowser)
BEGIN_MESSAGE_MAP(CFulltextCtrl, CIEBrowser)
ON_WM_PAINT()
ON_WM_HELPINFO()
END_MESSAGE_MAP()
I have a dialog with a control using this CFulltextCtrl. I can create and show the html perfectly inside the form. But all links inside this control don't work (scenario 1). If I create a form who have a control of the type CIEBrowser, the EXACTLY same html code works perfectly (scenario 2).
In particular, I need that when I click in one link, execute a method called OnClick, who performs all that I need, just like in scenario 2.
This is my DISPATCH_MAP in the derived class (CFulltextCtrl):
Code:
BEGIN_DISPATCH_MAP(CFulltextCtrl, CIEBrowser)
DISP_FUNCTION_ID(CFulltextCtrl,"HTMLELEMENTEVENTS2_ONCLICK", DISPID_HTMLELEMENTEVENTS2_ONCLICK,
OnClick, VT_EMPTY, VTS_DISPATCH)
DISP_FUNCTION_ID(CFulltextCtrl,"HTMLELEMENTEVENTS2_ONKEYDOWN", DISPID_HTMLELEMENTEVENTS2_ONKEYDOWN,
OnKeyDown, VT_EMPTY, VTS_DISPATCH)
DISP_FUNCTION_ID(CFulltextCtrl,"HTMLELEMENTEVENTS2_ONKEYUP", DISPID_HTMLELEMENTEVENTS2_ONKEYUP,
OnKeyUp, VT_EMPTY, VTS_DISPATCH)
END_DISPATCH_MAP()
View 5 Replies
View Related
Oct 17, 2013
I'm programming with VS2010, for windows 7. The user likes to use the windows classic theme, and I discovered that BS_MULTILINE style isn't working as I expect. When a button is pressed in the classic theme, it looks like there is a temporary margin added that causes the text to wrap only when the button is pushed. It works fine with any other theme.
View 1 Replies
View Related
Apr 26, 2014
I have a situation where I am accessing an ASP.NET Generic Handler to load data using JQuery. But since data loaded from Javascript is not visible to the search engine crawlers, I decided to load data from C# and then cache it for JQuery. My handler contains a lot of logic that I don't want to apply again on code behind. Here is my Handler code:
public void ProcessRequest(HttpContext context) {
JavascriptSerializer jsonSerializer = new JavascriptSerializer();
string jsonString = string.Empty;
context.Request.InputStream.Position = 0;
using (var inputStream = new System.IO.StreamReader(context.Request.InputStream))
[Code] ....
I can call the function : getUserControlMarkup() from C# but I will have to apply some URL based conditions while calling it. The contentType.typeOfContent is actually based on URL parameters.
If possible to send JSON data to this handler then how to do that. I am trying to access the handler like this:
HttpWebRequest request = (HttpWebRequest)WebRequest.Create(Common.host + "Handlers/SideContentLoader.ashx?typeOfContent=1&UCArgs=cdata");
HttpWebResponse response = (HttpWebResponse)request.GetResponse();
But its giving NullReferenceException in Handler code at line:
ContentType contentType = jsonSerializer.Deserialize<ContentType>(jsonString);
View 1 Replies
View Related
Jan 21, 2015
#include <iostream>
int ival1
int ival2=1
int summe
/* run this program using the console pauser or add your own getch, system("pause") or input loop */
int main() {
[Code] .....
If I compile it I've got these errors
[Error] expected initializer before 'int'
recipe for target 'rechnen.o' failed
View 14 Replies
View Related
Mar 29, 2014
I keep getting an error here and cant quite figure out why,
Code:
else if (mainMenu == 3){
cout << "Please make a selection" << endl
<< " 1) Withdraw from account" << endl
<< " 3) Back to main menu" << endl;
cin >> withdrawMenu;
if (withdrawMenu == 1){
[Code] ....
View 1 Replies
View Related
Jun 18, 2014
I wrote a program, that generates 20 random integers, and stores them in an array. Then I decided, to build more functions to it, i.e why not have it to display the lowest integer of an array. I created my function,
Code:
int minValue( int field[ ] )
and got my code in side, which (technically) works. In my main() function I'm calling
Code:
printf( "The smallest value of an array is: %d
", minValue( field[] ) );
and I'm getting an error trying to compile it.
Code:
randomArray.c:62:74: error: expected expression before ']' token
printf( "The smallest value of an array is: %d
", minValue( field[] ) );
View 2 Replies
View Related
May 26, 2014
This is what i have example code in c++:
#include <iostream>
class Foo{
public:
void bar(){
std::cout << "Hello" << std::endl;
[Code] ....
After compiling it is giving error as :
foo.cpp: In function ‘int Foo_max(Foo*)’:
foo.cpp:26:37: error: expected primary-expression before ‘int’
foo.cpp:26:46: error: expected primary-expression before ‘int’
View 6 Replies
View Related
Jan 21, 2014
This first Dowhile loop is saying "expected unqualified-id" at the do and while parts. What does that mean
do {
do {
do {
std::cout << "Give me a test result or grade from 0 to 100 for class"<< 1 << std::endl;
std::cin >> mathaverage[mathtestcount];
loopresult=1;
[Code] .....
View 2 Replies
View Related
