Just using Find in my source code to look for variables or whatever, works once or twice then just stops - Doesn't find anything even if it's there. If I restart VS it works again, but not for long.
View 1 RepliesI am trying to enter data to a structure some 8 times, but not able to do so. Here is my code.
Code: #include<stdio.h>
struct _Timer {
unsigned int HH;
unsigned int MM;
}Time[8];
[code]...
But when I enter any data and press enter , the .exe file stops working and not able to enter data.
I'm having troubles with this program I made. Put it simply, it's a basic program using Queues. Whenever I try to input a value, my compiler(Dev C) suddenly stops working. The .exe file crashes and I've no way on how I can execute my program.
Code :
#include<iostream>
using namespace std;
int *queue;
int rear, front, queueSize;
void enqueue();
void dequeue();
void display();
[Code] ....
I'm making an apllication which needs to play .wav file when user type something inside QTextEdit. I made some code but after minute or less the sound stops, so I made silly workarround. After 30 clicks I invoke sound->stop(); and then the loop start again, that works, but it's not good, can you give better solution. Here is my code:
Code:
int count = 0;
bool MainWindow::eventFilter(QObject *o, QEvent *e){
if(e->type() == QEvent::KeyPress)
{
tipka->play();
tipka->seek(0);
[Code]...
Why is my program outputting zero for the variable pop?
Code:
#include <iostream>
int main(void){
using namespace std;
//capture data
cout << "Enter the world's population: ";
[Code] ....
It's obviously not std::cout, but I'm thinking its the way I'm operating on long?
Here your supposed to create a program that takes in information and formats it into three columns.
I can't seem to use the float variable unitprice with decimal places here for, if I try to use %.1f and type in an input, the program seems to skip over the second scanf function, not allowing me to put input into the third scanf function as the program runs before I can.
I can use %f on its own and it works but this creates too many zeroes(and you're supposed to set the currency limit to $99999.99).
Code:
#include <stdio.h>
int main(void) {
int itemno, month, year, day;
float unitprice;
[Code]....
So the output should look like three columns. It's just the float that is the issue here....
As I was testing it, the program suddenly stopped giving an output. Here is the code:
#include <iostream>
using namespace std;
int main() {
cout << "Ten people ate breakfast with you this morning. Each of them " <<
"had pancakes.
Please enter how many pancakes each of the ten people " <<
"ate.
" << endl;
[Code] ...
The while loop after int glutton does not work and seems to stop the program. I replaced the "glutton" in the cout with "testing testing" and it still did not work. However, when I commented out the loop, it appeared. Finally, it can't be what's inside the loop, because I commented that out too, and it still didn't work.
the program is of an address book. the syntax is all fine, and the initial menu of options does show up. but once you punch in the cin, the program just stops.
View 9 Replies View RelatedI'm currently trying to work with more than one form, but I didn't succeed yet. What I need is quite simple: Once the program runs, a small form appears first asking "what would you like to do" with corresponding buttons for each option. Each button loads a new different form for a different task. So basically I need to open and close forms, also having two forms loaded at the same time (pop-up style) would be great for certain purposes.
I still haven't figured how to do it properly. I'm currently using VC++ 2008 and my project is a Windows Forms Application.
FloodFill is not working. I am using Visual C 6.0 in windows 7 environment. Its not filling a triangle.
My code is:
Code:
void CFloodFillExView::OnDraw(CDC* pDC) {
CFloodFillExDoc* pDoc = GetDocument();
ASSERT_VALID(pDoc);
// TODO: add draw code for native data here
CPoint Pt[7];
Pt[0] = CPoint(300, 400);
Pt[1] = CPoint(200, 300);
[code]....
I am currently working on a c++ project that will input students and process their grades. I encountered a problem and my code stops executing after the getScores function. Im not sure what the problem is, but im guessing its something within the function and the loops.
//Name: getScores
//Description: Will get scores for student
//Parameters: None
//Return: testScore
double getScores()
[code]....
i wrote a little program with fseek. It works good till it reaches the first fseek(). Then it crashes and stops responding.My code:
ifstream inp("myfile.txt");
if(!inp.is_open()) return false;
inp.close();
FILE *f;
fopen("myfile.txt","rb");
[code].....
Dialogue box in the program is displayed but button will not respond. I created dialogue box using resource wizard,
Code in Resource.rc for dialogue box is generated as below
IDD_DIALOG1 DIALOGEX 0, 0, 131, 69
STYLE DS_SETFONT | DS_FIXEDSYS | WS_POPUP | WS_VISIBLE | WS_CAPTION | WS_SYSMENU
EXSTYLE WS_EX_APPWINDOW
CAPTION "Test dialogue"
FONT 8, "MS Shell Dlg", 400, 0, 0x1
BEGIN
DEFPUSHBUTTON "That is Good",IDOK,30,35,66,25
[Code] .....
Any way to create a variable using a variable in the name? So E.g. if you wanted to create an int named nr(x), and x was 1, you would get an int variable named nr1? How would you do this?
View 10 Replies View RelatedI have a slider control on a dialog box. I am playing a video file and slider moves according to the video elapsed. Suppose I have set the slider range to 100. Now till some point say 90, the slider moves to the point wherever I click the mouse. but at the last point in between some range say 90 - 100 (to the end of the slider), if I click the mouse button anywhere, slider jumps to the end.
I am using a TimeLine control where user can add more than 1 video (1, 2, 4, 8, 10 , 50 etc......), If I use only one video, slider moves as per the video progression.....Issue arises when I add more than 1 video and click on the start button, slider starts moving....Now when I drag the slider to any position or I click the mouse button anywhere on the slider control, slider thumb moves to that position and immediately jumps back to some other position. This is the Issue, I am facing.
share some sample code where slider is moving with the video showing the progress of the video.
I want to implement a functionality similar to VLC player. Wherever user clicks the mouse, slider moves to that point.
My code is below:
Total Interest ends up as my last Monthly Payment amount instead of adding up all Interest Paid - What am I doing wrong?
Total Paid isn't calculating correcly either - What am I doing wrong?
I suspect both are very similar problems. I've tried several different calculations, but cannot figure this out.
#include <iostream>
#include <cmath>
using namespace std;
double GetMonthlyIntrest (double OpenBalance,double rate);
bool ContinuePgm();
int main () {
double StartingBalance,rate,amount,OpenBalance,IntPmt,TotalInt=0.0,GrandTotal=0.0;
[code]...
I have a CDHtmlDialog app in which am trying to add a CSS media query in the HTML file as shown below, but it doesn't work.
@media (max-width:20em) {
table, thead, tbody, tfoot, th, td, tr { display:block; }
tr + tr { margin-top:1em; }
}
The same CSS works fine if i open in a browser like IE, FireFox, Chrome. But inside the CDHtmlDialog app this doesn't work.
I am using Visual Studio 2012 for development and have IE 11 installed in my machine.
The below code is working fine in VS2008 and not working in VC6.0 (taking garbage values) this code is for converting hex values to string.
sending Input string is : 727332333263 required output: rs232c
DWORD AsciiToString(LPCTSTR f_chInputChar, LPTSTR f_chOutputChar) {
long ch;
int i,j;
TCHAR tmp[2];
int len = _tcslen(f_chInputChar);
[Code] ....
I keep having problems with CMFCPropertySheets. I now have it embedded in a resizable dialog and the property sheet and page gets resized when dialog is resized all that is working fine.
Problem is OnSize is being called when the dialog is being resized NOT when it has finished resizing so the values reported in cx and cy is the old size not the size AFTER resizing. What could be causing this? Isn't OnSize call AFTER the size has been changed and OnSizing called WHILE the size is being changed?
I have a list control that needs to take up full rect in each page and when the dialog is maximized it stays at previous size even though the sheet and page have both maximized as they should.
I ran a trace on the OnSize even for both the sheet and page and OnSize is being called during the sizing and not after it has already been sized like it is supposed to.
I downloaded Visual Studio 2013 on a new laptop. On my old one I could press things like ctrl + F7 to compile and ctrl + F5 to start without debugging however now it isn't responding when I type those commands. Nothing happens at all. How to change this? I googled "keyboard shortcuts not working in Visual Studio 2013" but per the usual Google comes up with garbage search results that do not pertain at all.
View 1 Replies View RelatedI can't get tooltips to show up for the windows I want in my CFormView derived class. I have copied the code from the MSDN entry on EnableToolTips(). But only two windows respond with a tooltip:
CONTROL "Tree1",IDC_TESTPLANS,"SysTreeView32",TVS_HASBUTTONS | TVS_HASLINES | TVS_EDITLABELS | TVS_SHOWSELALWAYS | WS_BORDER | WS_HSCROLL | WS_TABSTOP,1,36,85,91
CONTROL "Tab1",IDC_TABCMD,"SysTabControl32",0x0,101,0,239,181
Other windows do not respond. For these windows my function designed to catch the TTN_NEEDTEXTW and TTN_NEEDTEXTA messages is not called. Windows such as
LISTBOX IDC_TESTPLANNAMES,0,119,48,40,LBS_SORT | LBS_NOINTEGRALHEIGHT | WS_VSCROLL | WS_TABSTOP
PUSHBUTTON "",IDC_BTN_COPY,105,177,24,24,BS_ICON
Why wouldn't the messages be sent for those windows? I'm using the code
ON_NOTIFY_EX_RANGE(TTN_NEEDTEXTW, 0, 0xFFFF, &CCntlrView::OnTtnNeedText)
ON_NOTIFY_EX_RANGE(TTN_NEEDTEXTA, 0, 0xFFFF, &CCntlrView::OnTtnNeedText)
(CCntrlView is the name of my class derived from CFormView.) And as I pointed out, I'm using the code straight from the example given in MSDN for CWnd::EnableToolTips(), with the only difference being that all my controls are created in the rc file as shown above.
I'm having problem using the click event in a web browser control. I have a control called CIEBrowser that implements a Web control. Here a message_map:
Code:
IMPLEMENT_DYNCREATE(CIEBrowser, CWnd)
BEGIN_MESSAGE_MAP(CIEBrowser, CWnd)
ON_COMMAND_RANGE(ID_IEHOME,ID_IESTOP, OnToolBarCmd)
ON_UPDATE_COMMAND_UI_RANGE(ID_IEHOME,ID_IESTOP, OnUpdateToolBarCmd)
ON_NOTIFY_EX_RANGE(TTN_NEEDTEXTW, 0, 0xFFFF, OnToolTipNotify)
ON_NOTIFY_EX_RANGE(TTN_NEEDTEXTA, 0, 0xFFFF, OnToolTipNotify)
END_MESSAGE_MAP()
I want to implement a derived class called CFulltextCtrl.
Code:
IMPLEMENT_DYNCREATE(CFulltextCtrl, CIEBrowser)
BEGIN_MESSAGE_MAP(CFulltextCtrl, CIEBrowser)
ON_WM_PAINT()
ON_WM_HELPINFO()
END_MESSAGE_MAP()
I have a dialog with a control using this CFulltextCtrl. I can create and show the html perfectly inside the form. But all links inside this control don't work (scenario 1). If I create a form who have a control of the type CIEBrowser, the EXACTLY same html code works perfectly (scenario 2).
In particular, I need that when I click in one link, execute a method called OnClick, who performs all that I need, just like in scenario 2.
This is my DISPATCH_MAP in the derived class (CFulltextCtrl):
Code:
BEGIN_DISPATCH_MAP(CFulltextCtrl, CIEBrowser)
DISP_FUNCTION_ID(CFulltextCtrl,"HTMLELEMENTEVENTS2_ONCLICK", DISPID_HTMLELEMENTEVENTS2_ONCLICK,
OnClick, VT_EMPTY, VTS_DISPATCH)
DISP_FUNCTION_ID(CFulltextCtrl,"HTMLELEMENTEVENTS2_ONKEYDOWN", DISPID_HTMLELEMENTEVENTS2_ONKEYDOWN,
OnKeyDown, VT_EMPTY, VTS_DISPATCH)
DISP_FUNCTION_ID(CFulltextCtrl,"HTMLELEMENTEVENTS2_ONKEYUP", DISPID_HTMLELEMENTEVENTS2_ONKEYUP,
OnKeyUp, VT_EMPTY, VTS_DISPATCH)
END_DISPATCH_MAP()
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
using System.IO.Ports;
[Code] ....
How to pick date / time when serial port starts reading , and also when reading stops ?
I'm programming with VS2010, for windows 7. The user likes to use the windows classic theme, and I discovered that BS_MULTILINE style isn't working as I expect. When a button is pressed in the classic theme, it looks like there is a temporary margin added that causes the text to wrap only when the button is pushed. It works fine with any other theme.
View 1 Replies View RelatedThe code is bulit for the x64 platform with unicode enabled.
Code:
class CameraExporter : public UtilityObj {
static INT_PTR CALLBACK DlgProc(HWND hWnd, UINT msg, WPARAM wParam, LPARAM lParam);
};
void CameraExporter::BeginEditParams(Interface* ip,IUtil* iu) {
[Code] .....
Error2error LNK2019: unresolved external symbol "public: static __int64 __cdecl CameraExporter::DlgProc(struct HWND__ *,unsigned int,unsigned __int64,__int64)" (?DlgProc@CameraExporter@@SA_JPEAUHWND__@@I_K_J@Z) referenced in function "public: virtual void __cdecl CameraExporter::BeginEditParams(class Interface *,class IUtil *)" (?BeginEditParams@CameraExporter@@UEAAXPEAVInterface@@PEAVIUtil@@@Z)e:Jackydocumentsvisual studio 2010ProjectsCameraExporterCameraExporterCameraExporter.objCameraExporter
I have a std::map<int, foo>
what's the ideal way to get an iterator to the item that has the largest key (int) smaller than a given value.
basically, the item before upper_bound(). I can use upper_bound() and then decrement, but it needs special cases for both end() and begin(), and in the case of end() I'm not sure how I get it to the last item in the map, afaik, we're not allowed to decrement end().
Code:
auto it = mymap.upper_bound(x);
if (it==mymap.begin()) // first item in the map is already too large. reject
NotFound();
else if (it==mymap.end())
[Code] .....
// here it points to largest item smaller than x.
I can iterate over the entire map and do a compare, but then I pretty much loose the benefit of the binary search.