i am trying to do a button with red line around it, i don't know exactly how do it.
i am understanding i need to take the DC with GetDC and i have to use a pen, but i cannot see any red line.
I'm programming with VS2010, for windows 7. The user likes to use the windows classic theme, and I discovered that BS_MULTILINE style isn't working as I expect. When a button is pressed in the classic theme, it looks like there is a temporary margin added that causes the text to wrap only when the button is pushed. It works fine with any other theme.
View 1 Replies View RelatedI was loaded a bmp file in my mfc window and stored rgb data in a file.My image size is 320x240.
Is possible to pick a single point (location) from that bmp image (Not the whole window)?
i like to plot a line graph using the pointed single line data using the stored file data?
here R is X Axis and G & B is Y Axis.
If i have 2D array of data means how can i plot the line graph?
How can a mulitline string be read line by line
ex: str = "PERIOD="week"
DAY="day"
TIME="time"";
I'm getting this when I compile my program. Then, when the program runs I get an error. I assume it is because I have the warning for this problem. How can get around this error.
warning C4172: returning address of local variable or temporary
Code:
#include <iostream>
#include <cstring>
using namespace std;
[Code]....
I want to read a file and replace a particular line in a file.
Ex:
temp.txt file contains below
FilePath1: xxxxxxxxxxxxxxxxxxxxxxxxx
FilePath2: xxxxxxxxxxxxxxxxxxxxxxxxx
FilePath3: xxxxxxxxxxxxxxxxxxxxxxxxx
Mode: 1
Here My requirement is replace the 4th line Mode: 2 instead of Mode: 1.
I was used seek method like below,
Code:
CStdioFile SaveFile;
CString strFilePath;
strFilePath = _T("C:Sara emp.txt");
if (SaveFile.Open(strFilePath, CFile::modeCreate | CFile::modeNoTruncate | CFile::modeReadWrite), &fileException) {
[Code] ....
The above code not working correctly.
i got 2 arrays, how would i print 10 numbers per line, so that would be 5 numbers from each array.
array1[40];
array2[40];
array1 array2// array1 array2// array1 array2 // array1 array2 // array1 array2
array1 array2// array1 array2// array1 array2 // array1 array2 // array1 array2
array1 array2// array1 array2// array1 array2 // array1 array2 // array1 array2
...... and so on
how can i put this in a loop?
and so on but there are 80 elements so i cant go one by one.
Code:
/** Add a feature to a (mutable) LV2 feature array. */
static inline void
suil_add_feature(LV2_Feature*** features,
unsigned* n,
const char* uri,
void* data) {
for (unsigned i = 0; i < *n && (*features)[i]; ++i) {
if (!strcmp((*features)[i]->URI, uri)) {
[Code] ....
suil_add_feature is used to add features to an existing array of pointers to type LV2_Feature. Initially, the array gets searched to see if the feature already exists. If it doesn't, the existing array gets increased by one element which then gets initialized to the new LV2_Feature value. Resizing is done using realloc()
I'm having a problem when I build a Debug version. The first 5 times I call suil_add_feature() realloc() ends up calling _realloc_dbg() (in dbgheap.c) and everything works fine. But on the sixth call, realloc() calls _realloc_base() (in realloc.c) which brings everything crashing down. I assume that _realloc_base() is intended for the normal (non-debug heap). So this particular app is somehow linking to both the debug and non-debug runtime modules.
If I was building using the VS IDE I could probably figure this out - but although my compiler is MSVC, my build environment is waf, which I'm a bit unfamiliar with. I'm guessing I need to add some lines to my waf script to let it know that it shuld ignore the non-debug runtime libraries when building a Debug version.
Can I achieve this by adding /NODEFAULTLIB to the linker options or is it more complicated than that?
Any good algorithm for calculating the closest points/distance between two line segments? I use some pretty general code: [URL] ....
which seems widely used and advertized on the web and works in most cases but seems to often fail horribly when line segments are nearly parallel. I've been messing with the SMALL_NUM value for division overflow to no avail. The calculated distance can still vary widely when nearly parallel.
I managed to isolate a specific incident where this happens in my code. The distance between segments P1P2 and Q1Q2 changed abruptly in one timestep from 1.05 mm to 0.90 mm (yarn radius = 1 mm), causing abrupt compression spikes. In reality the distance in the original timestep is definitely also around 0.90 mm but is not calculated as such. I find that the values of s and t (s=0 for P1, 1 for P2, t=0 for Q1, 1 for Q2) for the closest points are originally 0 and 0 (as well as in the previous time steps) and then change abruptly to 0 and around 0.29 in the new time step. What it should be, I still need to check out.
P1 = (0.012711 ,-0.000688 ,-0.001097);
P2 = (0.012895 ,-0.000686 ,-0.001133);
Q1 = (0.012676 ,-0.000689 ,-0.000999);
Q2 = (0.012859 ,-0.000687 ,-0.001034);
P1new = (0.012712, -0.000689, -0.001095);
P2new = (0.012895, -0.000687, -0.001131);
Q1new = (0.012676, -0.000690, -0.000996);
Q2new = (0.012859, -0.000688, -0.001032);
Results when calculating self contact of 15000 line segments in a few tens of fibers, one big mess:
Any better algorithm/corrections?
I want to read sentence from command line. I open some program which run in command line and I have to wait for that program process. So , I don't know when process success .I can't type next command if can't read sentence from command. I use
Code:
wprintf(GetCommandLine());
but it show
"C:UsersPKRUdocumentsvisual studio 2010ProjectsVirus ScanDebugMyProgram
How to read sentence from Command line with MFC?
I've spent some time trying to performance test various methods of loading / accessing a file, either into memory or through a memory mapped file, but I am having some trouble.
FILE * pFile;
std::ifstream ifs;
MapViewOfFile
I'm have trouble because Windows appears to cache the file, so I am getting very mixed results. Sometimes a huge file (100's MB's) will load quickly, other times almost instantly.
How to stop Windows from doing whatever it's doing, so I can see the real time taken to load/access a file from disk?
My program allow user to draw lines and the user should know the length of the line that he draw in centimeter (.cm)
I did use
SetMapMode(MM_LOMETRIC) function to convert the device units into logical units
and it works correctly but I don't know how the line length will appear to the user to let him draw in correct length
I think to make the length appear on the mouse when the user draw but I don't know how I calculate and display it.
I have a text file name fruit.txt that contains the following information of fruit id, fruitName and fruitQuantity.
Code:
1:pear:30
2:apple:20
3:banana:24
4:orange:15
5:watermelon:35
If let's say I key in 2, it will search for the id=2 and delete the whole line and the id of banana which is orignially 3, will become 2 and orange which is orignally 4 will become 3 etc.
I researched on how it can be done and most suggested to put inside a vector and fout the line.
I know how to put the values in the vector but how should I go about searching for the id and if the id is found it will delete that line inside the file.
Code:
ofstream fout;
ifstream readFile("fruit.txt");
while (getline(readFile, line)) {
[Code]....
I am suppose to make a program that will output a line for a specific age group,but everytime I execute the exe file it gives me the desired line and also the last line included everytime.Where did I go wrong with it including the last line everytime?
#include <iostream>
using namespace std;
int main() {
double age;
cout<<"Enter your age:";
cin>>age;
if (0<age && age <6)
[Code] ......
Actually the below program is for Dispersal Algorithm called Rabin-IDA; this algorithm divided the data into N pieces and then recombine it from M pieces (such that M<N).
Thus, the below program needs command line arguments,which entering by Project properties/Debugging. this argument is file name, where the program performing spitted the file into N files, and then recombine it from M divided files, and put it on another file which should also passing its name as argument .
Now my question is, How can i make this program enter the file name by keyboard??(i mean enter the files name by user from screen not as command line arguments) ... In another word, How I can exchange ?
Code:
argc == 3
and
Code:
argc == 2
To enter file name ? i mean what i should do to in
Code:
rabin.split(argv[1])
To pass my file name by use keyboard not Project properties/Debugging?)
the below code is just the main function of program, and the whole of it in this link [URL] .... Information Dispersal Algorithms Rabin-IDA.
Code:
#include "include.h"
void __cdecl _tmain(int argc, TCHAR *argv[]) {
DWORD ini=GetTickCount();
try {
if( argc == 3 ) //recombine
[Code] ....
I know I should use getline() function but how exchange argv[] ?
this is my C# code
System.IO.Directory.SetCurrentDirectory
("C:/Users/fahime/Documents/Visual Studio 2010/WebSites/MyWebSite/UserFiles/ProblemAnswers/");
Process.Start("cmd.exe", @"/k ""C:Program Files (x86)Microsoft Visual Studio 10.0VCvcvarsall.bat"" x86");
[Code] .....
I want to compile my cpp code file with visual studio cmd
How can I create in my C++ program so a user can paste a text and then choose a character on specific line and place?. The above thing isn't that important. I just want to place a character on a specific line and place.
I mean something like this:
Enter a character:
You choosed " / "
On which line do want the character?
You choosed "Line 1 and 2"
Where do you want the the to appear on the line? (left or right)
You choose left.
Results:
Line 1. / hello
Line 2. / hello
How to get this thing to work. All i need to do is ask user to input a name and then it brings out the line from the .txt file containing the information.
For example in my case I'm doing a member search function I'm required to ask user to input the name of the customer and then print out all the details (which consumes 1 text line in the .txt file)
Here is the code, This is the write to text file method (100% working)
Code:
cout << "Customer Name: ";
cin >> name;
// ...
ofstream myfile("customer.txt", ios::app);
[Code] .....
I need to write a ANSI program to print out each command line argument on a separate line using a for-loop. also it need to print the name of the executable .so far I have
Code:
#include <stdio.h>
int main(int argc, char **argv) {
int i;
printf("")
[code]....
l need to write a program which writes out its command line arguments in reverse order one per line. The output from the program should look like this:
% a.out Two roads diverged in a yellow wood
wood
yellow
a
in
diverged
roads
Two
I am trying to read a file line by line and then do something with the informations, so my method looks like this:
Code:
void open_file(char *link) {
FILE *file = fopen(link, "r");
if (file == NULL) {
fprintf(stderr, "Could not open file.
");
exit(EXIT_FAILURE);
[Code] ....
1) The first complain of valgrind is at the line where I use fgets and its telling me (invalid write of size x), but I have allocated my line to 56000 and the read line is shorter, why is there a write size error then :S?
2) at the line where I realloc where I try to shrink the space he's telling me: Address .... is 0 bytes inside a block of size 56000, But I know i need only this space so why is there a write over space error :S??
So I'm reading a file line by line and storing it backwards into a list. So if the file has has this format...
1
2
3
4
The code should store each line in a list as such...
4, 3, 2 ,1
Instead the code will store the last variable in all nodes. So the final list will look like this...
4, 4, 4, 4
Here is my code...
struct node *head = NULL;
int i;
while(read(in, &i, sizeof(int)) != 0) {
struct node *temp = malloc(sizeof(*temp));
temp->line = &i;
temp->next = head;
head = temp;
}
I need to read lines from one file and copy them line by line into another file using dynamic memory allocation. It compiles but gives me a seg fault. Why/How?
Code:
int main(){
FILE *fp1;
FILE *fp2;
FILE *i;
fp1=fopen("file1","r");
fp2=fopen("file3","w+");
[Code] ....
There are numbers of lines connected to each other. I've extracted the line start point and end points but i am confused how to compare the end point of one line with the start point of adjoining line.
View 2 Replies View RelatedI'm using fgets which will read a single line at a time, but unlike fgets I don't want it to return the new line char ( ) ?I want to be able to use printf to display the lines next to each other.
View 7 Replies View RelatedI have a text file (test.txt) with the following data:
01,05,25,20130728
01,06,25,20130728
01,07,25,20130728
01,08,25,20130728
01,05,25,20130728
01,05,25,20130728
01,05,45,20130728
01,05,65,20130728
01,05,85,20130728
01,05,35,20130728
01,05,25,20130728
01,05,35,20130728
I want to read this to one string called line. So far I have this code:
string line;
ifstream myfile ("/home/Test.txt");
if (myfile.is_open()) {
while (myfile.good()) {
getline (myfile, line);
for (int a = 0; a <= 335; a++) {
cout <<line.at(a);
} }
myfile.close();
}
so far its only printing the first line and then throwing an instance of 'std::out_of_range'