this is my C# code
System.IO.Directory.SetCurrentDirectory
("C:/Users/fahime/Documents/Visual Studio 2010/WebSites/MyWebSite/UserFiles/ProblemAnswers/");
Process.Start("cmd.exe", @"/k ""C:Program Files (x86)Microsoft Visual Studio 10.0VCvcvarsall.bat"" x86");
[Code] .....
I want to compile my cpp code file with visual studio cmd
I'm working on windows and I'd like to know how to compile the C file to a different path.
What I mean is : the basic compile command is :gcc Hello.c -o Hello_E
I'd like to create the "hello_E" in a different path.Something like this:
gcc Hello.c -o C:Program FilesPellesCC_programsExe_filesHello_E
I'm working on a project that's got a lot of moving parts, from feedback from a position sensor to real-time video editing. The script that runs the sensor is in C++, and the API for the video editing software (vMIX) is executed with HTTP protocol. I'm hoping to use that C++ script to control the video software (as some of the editing is dependent on particular feedback from the sensor), and wanted to see how to execute a HTTP command from a C++ script.
View 3 Replies View Relatedi wrote the c program for command line arguments,but i don't know how execute c program through command prompt
i did like this
d: cin>
then how should i proceed for execution
I want to execute one command using batch file but non of below code is working. Following are codes for executing batch file, First trial:-
STARTUPINFO si;
PROCESS_INFORMATION pi;
ZeroMemory( &si, sizeof(si) );
si.cb = sizeof(si);
ZeroMemory( &pi, sizeof(pi) );
if( !CreateProcess( NULL,
"cmd /C sa.bat",
[Code]....
Non of above code is working for me but when open same batch file using double click it work like I expected.
Following is content of the file,
C:windowssystem32wusa /uninstall /kb:2718695 /quiet /forcerestart
Command use to uninstall internet explorer 10 an install internet explorer9.
Actually the below program is for Dispersal Algorithm called Rabin-IDA; this algorithm divided the data into N pieces and then recombine it from M pieces (such that M<N).
Thus, the below program needs command line arguments,which entering by Project properties/Debugging. this argument is file name, where the program performing spitted the file into N files, and then recombine it from M divided files, and put it on another file which should also passing its name as argument .
Now my question is, How can i make this program enter the file name by keyboard??(i mean enter the files name by user from screen not as command line arguments) ... In another word, How I can exchange ?
Code:
argc == 3
and
Code:
argc == 2
To enter file name ? i mean what i should do to in
Code:
rabin.split(argv[1])
To pass my file name by use keyboard not Project properties/Debugging?)
the below code is just the main function of program, and the whole of it in this link [URL] .... Information Dispersal Algorithms Rabin-IDA.
Code:
#include "include.h"
void __cdecl _tmain(int argc, TCHAR *argv[]) {
DWORD ini=GetTickCount();
try {
if( argc == 3 ) //recombine
[Code] ....
I know I should use getline() function but how exchange argv[] ?
In Windows, if you open a command prompt, there are a bunch of keywords like, 'chdir', 'copy', ...
What I'm trying to figure out is how to use that COPY command in c++ code. I want to use the COPY command with the options (/a, /b, ...).
Whenever i run this on Visual Studio, it keeps exiting with code 0
Code:
#include "stdafx.h"
#include "stdio.h" // NULL defined here
#include "stdlib.h" // malloc function here
#include <string.h> //for handling strings
#include <ctype.h>
char reg_num[21]; //used in get_new_value
[Code] .....
I am facing a problem in C++,I want to execute a command in Command prompt from a specific path.I am able o select a path and execute cmd.exe using the function ShellExecute but the problem is after selecting the path I am not able to execute the command, the command is appearing on another command prompt.
View 4 Replies View RelatedI have a Third Party MS-DOS program, RUN.EXE
RUN.EXE do the following:
1. Read FILE.INP as input file and run its code execution.
2. When finish, RUN.EXE will produce FILE.OUT as the output of its code execution.
3. However, if calculation made in the code execution come to unsatisfied condition, RUN.EXE will terminate without producing FILE.OUT or partially produce FILE.OUT.
I want to write a program using MFC which I can set a several input case. The program should be able to:
1. Call RUN.EXE.
2. Wait for RUN.EXE to exit.
3. Continue with other code.
I can't modified RUN.EXE. I can't have RUN.EXE callback my program to let know it finish its work.
Are there any functions to call RUN.EXE, a MS-DOS program? Are there any way for the program to check if RUN.EXE finish its work and exited?
This is my problem in my subject programming but i dont how to use Array in windows form ... If i run my code i want my Data in listview would not be disappear if i close the form ...?
View 1 Replies View RelatedCode:
/** Add a feature to a (mutable) LV2 feature array. */
static inline void
suil_add_feature(LV2_Feature*** features,
unsigned* n,
const char* uri,
void* data) {
for (unsigned i = 0; i < *n && (*features)[i]; ++i) {
if (!strcmp((*features)[i]->URI, uri)) {
[Code] ....
suil_add_feature is used to add features to an existing array of pointers to type LV2_Feature. Initially, the array gets searched to see if the feature already exists. If it doesn't, the existing array gets increased by one element which then gets initialized to the new LV2_Feature value. Resizing is done using realloc()
I'm having a problem when I build a Debug version. The first 5 times I call suil_add_feature() realloc() ends up calling _realloc_dbg() (in dbgheap.c) and everything works fine. But on the sixth call, realloc() calls _realloc_base() (in realloc.c) which brings everything crashing down. I assume that _realloc_base() is intended for the normal (non-debug heap). So this particular app is somehow linking to both the debug and non-debug runtime modules.
If I was building using the VS IDE I could probably figure this out - but although my compiler is MSVC, my build environment is waf, which I'm a bit unfamiliar with. I'm guessing I need to add some lines to my waf script to let it know that it shuld ignore the non-debug runtime libraries when building a Debug version.
Can I achieve this by adding /NODEFAULTLIB to the linker options or is it more complicated than that?
I want to read sentence from command line. I open some program which run in command line and I have to wait for that program process. So , I don't know when process success .I can't type next command if can't read sentence from command. I use
Code:
wprintf(GetCommandLine());
but it show
"C:UsersPKRUdocumentsvisual studio 2010ProjectsVirus ScanDebugMyProgram
How to read sentence from Command line with MFC?
I'm working on a Hash Table implementation and after fixing all the errors and finally getting it to compile and link correctly, I am met with a black screen upon execute.
main.cpp
#include <stdio.h>
#include <string.h>
[Code]....
I tried inserting a debug statement in the main() function to see, and it wouldn't even print out the message "debug me" on the screen.
I am using Code::Blocks on Windows with the mingw32-g++.exe compiler. Here is my build log:
mingw32-g++.exe -Wall -g -c D:MediaDesktopHashElement.cpp -o objDebugElement.o
mingw32-g++.exe -Wall -g -c D:MediaDesktopHashHashTab.cpp -o objDebugHashTab.o
mingw32-g++.exe -Wall -g -c D:MediaDesktopHashmain.cpp -o objDebugmain.o
mingw32-g++.exe -Wall -g -c D:MediaDesktopHashStudent.cpp -o objDebugStudent.o
mingw32-g++.exe -o binDebugHash.exe objDebugElement.o
objDebugHashTab.o objDebugmain.o objDebugStudent.o -mwindows
Output size is 1.06 MB
Process terminated with status 0 (0 minutes, 2 seconds)
0 errors, 0 warnings (0 minutes, 2 seconds)
I'm trying to read in a file specified in the command line but I'm having some trouble. The command line entry specifies the inputfile preceded by '<' and the output file preceded by '>' like so
./program -v < input_file.cmd > output_file.cmd
This is what I've got so far.
int main(int argc,char* argv[]){
string strv="-v";
string input="<";
string output=">";
string str;
string input_file;
const char* in=input_file.c_str();
[Code] .....
This compiles ok, but when i run it using :
./program -v < test1.cmd
I get a segfault, if i cout argc it returns '2' where i would expect for this command line entry, I 'd get 4.
I'm not yet outputting to file, just to the screen so im not specifying an output file yet.
I'm currently working on making a program that is run through a GUI run through the command line. The program basically takes an app file and a boot file and runs it through a bunch of functions and generates a new outfile. Anyway I'm new to C and can't figure out how to code it so I can type the two file paths into the command line and read them into the function. Is it possible to do this within the "if else" statement?
Code:
int main(int argc, char *argv[]){
const char * const SrcFilePath;
const char * const SRecordPath;
const char * const FopIspFilePath;
[Code] ....
i would like to read the content of a text file data.txt (line by line ) directly from the command line using this command: a.exe < data.txt.
What could be the c++ code to read/get the content of these lines (without using ifstream). The treatment of the lines is not a problem for me but i really don't know how to access the content of the file from the c++ code
My program takes in an input file from the command line and converts the string from the file into a linked list and then depending on the command it will manipulate the string to either reverse the list, print the list, or take a character out...I'm having trouble taking a character out, my code compiles fine but doesn't change the string at all
Code:
#include <stdio.h>
#include <stdlib.h>
#define SIZE 1024
[Code]....
I have code that creates an index file created from a data file of records.
#include <iostream>
#include <fstream>
#include <map>
#include <sstream>
#include <string>
#include <iomanip>
using namespace std;
class Record {
[Code]...
I now need to write a second program that allows the user to enter a command on the Linux command line such as
search 12382 prog5.idx
and returns the information for the record with that key. The code I included for the index file is correct and works properly, but how to write the second program.
Here is the index file created by the first program:
8: blank 0 $ 0.00
12165: Item16 30 $ 7.69
12345: Item06 45 $ 14.20
12382: Item09 62 $ 41.37
12434: Item04 21 $ 17.30
16541: Item12 21 $ 9.99
21212: Itme31 19 $ 8.35
34186: Item25 18 $ 17.75
41742: Item14 55 $ 12.36
The top line is a dummy record, the first number is the size of the file.
I need to write a ANSI program to print out each command line argument on a separate line using a for-loop. also it need to print the name of the executable .so far I have
Code:
#include <stdio.h>
int main(int argc, char **argv) {
int i;
printf("")
[code]....
l need to write a program which writes out its command line arguments in reverse order one per line. The output from the program should look like this:
% a.out Two roads diverged in a yellow wood
wood
yellow
a
in
diverged
roads
Two
i am using visual studio 2010 for my work. Which header file contains the mmap and munmap functions? i am trying to map a file into the memory.
View 1 Replies View RelatedI'm trying to create a program that will show what the 12th digit of a UPC code would be. However, once the user enters the first 11 digits the program doesn't execute the last call of printf. The program compiles with no issues.
Code:
#include<stdio.h>
int main() {
int o1, e2, o3, e4, o5, e6, o7, e8, o9, e10, o11, oddsum, evensum, twelve;
printf
[Code] .....
I am using visual studio 2012.....in below code i m writing data in to a test.txt file but i dont know with which key file stop accepting char...i tried ctrl+z and ctrl+d but not working ....
Code:
#include<stdio.h>
#include<conio.h>
main(){
char ch;
FILE *ptr;
[Code] ....
I write a program which now works perfectly well. However, I want to make it run at the right time automatically, instead of waiting for a user to start it when needed.
The basic problem is, that in a WinPE environment an exe is running. Unfortunately it would need critical input, which must be inputted perfectly. So, I wrote a program which gets the data and sends it to the other app, by bringing it to the front and presses the keys needed using SendInput().
However, this program should wait for it's cue, then get on the inputting part. It's cue should be the point where the program waits for the first user input with this displayed on the last line:
Text:
My question is: how to listen and check whether the last line displayed is "Text:"?
I've tried with AttachConsole(), but for some reason it opens a new console window. I checked and the PID I'm using is the console window's, so I don't know why that happens.
The few lines I'm trying with:
HWND hwnd = FindWindow(NULL, "Administrator: Command Prompt");
SetForegroundWindow(hwnd);
SetFocus(hwnd);
DWORD process_id;
GetWindowThreadProcessId(hwnd, &process_id);
[Code] ...
Please don't criticize the first line. I know it can be ambiguous, but I modified it, When actually using it, the exe name will be in the title, so it will be unique.
The problem is with the first "Type and Run," where the code looks like this:
Code:
/* print_it.c--This program prints a listing with line numbers! */
#include <stdlib.h>
#include <stdio.h>
void do_heading(char *filename);
int line = 0, page = 0;
[Code] ....
I am using the gcc compiler in Ubuntu 12.04 LTS and I get the following error:
Code:
print_it.c: In function "main":
print_it.c:36:15: error: "stdprn" undeclared (first use in this function)
print_it.c:36:15: note: each undeclared identifier is reported only once for each function it appears in
print_it.c: In function "do_heading":
print_it.c:49:16: error: "stdprn" undeclared (first use in this function)
I was told that "stdprn" can be recognised by a DOS based compiler and the book says I can try using "stdout" instead. It looks like this now:
Code:
/* print_it.c--This program prints a listing with line numbers! */
#include <stdlib.h>
#include <stdio.h>
void do_heading(char *filename);
int line = 0, page = 0;
[Code] .....
It compiled OK with the gcc compiler but I only get this when I run the program:
Code:
Proper Usage is:
print_it filename.ext
I am not sure whether I should continue looking into this but even when I tried compiling and running it on Windows, the .exe file won't even launch. The other ones do but this first one doesn't.
Questions:
1. What should be done to make this program run?
2. Even though the book says "don't care" if the reader does not understand the items (It's Day 1/Lesson 1), I would still like it to run as I don't want to experience compiling and running problems in the future. Should I even bother doing this section of the book or is it obsolete and should be skipped?