C :: ANSI Program To Print Out Each Command Line Argument On Separate Line Using For Loop

Mar 5, 2013

I need to write a ANSI program to print out each command line argument on a separate line using a for-loop. also it need to print the name of the executable .so far I have

Code:

#include <stdio.h>
int main(int argc, char **argv) {
int i;
printf("")

[code]....

View 1 Replies


ADVERTISEMENT

C :: Program Which Writes Out Its Command Line Arguments In Reverse Order One Per Line?

May 7, 2013

l need to write a program which writes out its command line arguments in reverse order one per line. The output from the program should look like this:

% a.out Two roads diverged in a yellow wood
wood
yellow
a
in
diverged
roads
Two

View 9 Replies View Related

C++ :: Command Line Argument And Multiple Sum Digits

Mar 26, 2013

I'm fairly new to C++ and have been understanding until Ive hit this rock. Im trying to figure out how to indicate whether or not a first command line argument interpreted as an integer is a multiple of the sum of its own digits. I understand that logic as if you type 20 = 2(2+0) where 2 is a multiple and 3113 = 8 which is not a multiple but i feel hopeless trying to set it up. And here is my code.

Code:
#include <iostream>
using namespace std;
int main(int argc, char*argv[])
{

[Code] .....

View 1 Replies View Related

C++ :: Get Last Line Displayed By Another Command Line Window

Apr 14, 2013

I write a program which now works perfectly well. However, I want to make it run at the right time automatically, instead of waiting for a user to start it when needed.

The basic problem is, that in a WinPE environment an exe is running. Unfortunately it would need critical input, which must be inputted perfectly. So, I wrote a program which gets the data and sends it to the other app, by bringing it to the front and presses the keys needed using SendInput().

However, this program should wait for it's cue, then get on the inputting part. It's cue should be the point where the program waits for the first user input with this displayed on the last line:

Text:

My question is: how to listen and check whether the last line displayed is "Text:"?

I've tried with AttachConsole(), but for some reason it opens a new console window. I checked and the PID I'm using is the console window's, so I don't know why that happens.

The few lines I'm trying with:

HWND hwnd = FindWindow(NULL, "Administrator: Command Prompt");
SetForegroundWindow(hwnd);
SetFocus(hwnd);
DWORD process_id;
GetWindowThreadProcessId(hwnd, &process_id);

[Code] ...

Please don't criticize the first line. I know it can be ambiguous, but I modified it, When actually using it, the exe name will be in the title, so it will be unique.

View 4 Replies View Related

C :: Incorporate Command Line Arguments Into Program?

May 26, 2014

In the following program, I have gotten it to work with IO redirection (not shown in this particular code), and have made some minor adjustments to get it to work with file processing. The only thing I have to do now is get it to work with command line arguments, and am slightly lost (and I have looked into it).

I basically just need to take a text file from a certain directory and send it to my program. Would need two files, an input and output file.

main.c
Code:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "LAB_6B_7B.h"

[Code].....

View 8 Replies View Related

C/C++ :: Program That Can Merge Files From Command Line In Li

Sep 22, 2014

I have written a C++ program that is supposed to open two text files (prog2a.dat and prog2b.dat) and write the contents of a specified range of lines to an output file (outfile.dat). I wrote a program that based on the example we were given (to take lines 5-15 from the first file and lines 4-12 of the second file and merge them into the output file) works perfectly. However, after asking my professor for some clarification on another part of the assignment, I found out I have not done this correctly. I have the code written so that it will always output the range of lines I mentioned earlier, but the program is actually supposed to allow the user to merge the files from the command line using whatever range they want by typing in the following command:

prog2 in1 5-15 in2 4-12 outfile

But I'm not sure how to tweak my current program to allow this to be done.

Here is the code that I have written, keep in mind that this works properly for the way it is written, but not how it is supposed to work for the purposes of the command line (hopefully that makes sense):

#include <iostream>
#include <fstream>
#include <cstdlib>
using namespace std;
int main() {
// Create output file
std::ofstream outFile("outfile.dat", ios::out);

[Code] .....

Is there any simple way to make this work as I described using the command line? Also, I am supposed to break this up into three files, a header file, the program file, and a test file (the test file contains main() and should close the 3 open files and display any error messages), but I'm getting really confused as to what should go in the header file. I know the header file should contain class definitions and constructors, but don't really know how to make that work for this specific program?

View 13 Replies View Related

C/C++ :: How To Execute Program Through Command Line With Arguments

Aug 13, 2012

i wrote the c program for command line arguments,but i don't know how execute c program through command prompt

i did like this

d: cin>

then how should i proceed for execution

View 1 Replies View Related

C :: How To Test Program That Opens Files In Command Line

Mar 10, 2014

The below program is supposed to display the contents of all files listed in the command line. When I try to run the program I get the fatal error "Debug Assertion Failed" Expression: file != NULL. I've done some researching on the matter and I gather it might be because I don't have any files listed in the command line?

How to enter files in the command line! I opened the Command Window in Windows XP and tried typing in "C> argc" and "% argc" (argc being the name of the file containing the below program) without any luck.

Code:

#include <stdio.h>
#include <stdlib.h>
int main (int argc, char * argv[]) {
int ch; // int to hold EOF
int count;
FILE *fp;
for(count = 1; count <= argc; count++) // agrc loop

[Code]...

View 5 Replies View Related

C :: How To Print Strings On The Same Line Without Moving To Next Line

Mar 12, 2013

Just working up for the google coding contest to start soon and have been practising some of the test questions however i make correct algorithms but my output is rejected because of the fact that my strings are printed on a new line so i wish to know a method to print strings using a printf statement or any other function on the same line ...

View 3 Replies View Related

C++ :: Program To Search Index File Using Command Line In Linux

Oct 28, 2014

I have code that creates an index file created from a data file of records.

#include <iostream>
#include <fstream>
#include <map>
#include <sstream>
#include <string>
#include <iomanip>
using namespace std;
class Record {

[Code]...

I now need to write a second program that allows the user to enter a command on the Linux command line such as

search 12382 prog5.idx

and returns the information for the record with that key. The code I included for the index file is correct and works properly, but how to write the second program.

Here is the index file created by the first program:

8: blank 0 $ 0.00
12165: Item16 30 $ 7.69
12345: Item06 45 $ 14.20
12382: Item09 62 $ 41.37
12434: Item04 21 $ 17.30
16541: Item12 21 $ 9.99
21212: Itme31 19 $ 8.35
34186: Item25 18 $ 17.75
41742: Item14 55 $ 12.36

The top line is a dummy record, the first number is the size of the file.

View 19 Replies View Related

C/C++ :: Unable To Create A Program That Takes Command Line Arguments And Prints Last One

Jan 18, 2015

I'm just getting back into the swing of things after a long time of not programming. I'm trying to create a program which takes in command line arguments and prints the last one. My code is as follows:

#include <iostream>
#include <vector>
#include <string>
using namespace std;
int main() {
string x;
vector<string> arguments;

[Code]...

And the error message I receive, a simple but frustrating one, is as follows:

Enter arguments, enter STOP to stop: Segmentation fault...

View 1 Replies View Related

C++ :: How To Separate One Line Into Two (or More) Strings At The Tab

Nov 3, 2013

i'm reading from a text file which includes a dictionary in UTF8. it has the following structure:

word, bla "bla" translation

so there's a word and a translation seperated by tab. both can include any kind of charactars, excluding tab of course, especially blanks (found one code that claimed to seperate a string at tab, but also did at blank).

how can i seperate one line into two (or more) strings at the tab? i've been searching for a while, but can't find anything useful...

View 2 Replies View Related

C :: Print Listing With Line Numbers - Cannot Execute / Run Program

Feb 18, 2013

The problem is with the first "Type and Run," where the code looks like this:

Code:
/* print_it.c--This program prints a listing with line numbers! */
#include <stdlib.h>
#include <stdio.h>

void do_heading(char *filename);
int line = 0, page = 0;

[Code] ....

I am using the gcc compiler in Ubuntu 12.04 LTS and I get the following error:

Code:
print_it.c: In function "main":
print_it.c:36:15: error: "stdprn" undeclared (first use in this function)
print_it.c:36:15: note: each undeclared identifier is reported only once for each function it appears in
print_it.c: In function "do_heading":
print_it.c:49:16: error: "stdprn" undeclared (first use in this function)

I was told that "stdprn" can be recognised by a DOS based compiler and the book says I can try using "stdout" instead. It looks like this now:

Code:
/* print_it.c--This program prints a listing with line numbers! */
#include <stdlib.h>
#include <stdio.h>

void do_heading(char *filename);
int line = 0, page = 0;

[Code] .....

It compiled OK with the gcc compiler but I only get this when I run the program:

Code:
Proper Usage is:
print_it filename.ext

I am not sure whether I should continue looking into this but even when I tried compiling and running it on Windows, the .exe file won't even launch. The other ones do but this first one doesn't.

Questions:

1. What should be done to make this program run?
2. Even though the book says "don't care" if the reader does not understand the items (It's Day 1/Lesson 1), I would still like it to run as I don't want to experience compiling and running problems in the future. Should I even bother doing this section of the book or is it obsolete and should be skipped?

View 6 Replies View Related

C :: Read 15 Numbers And Display Each Number On Separate Line

Oct 21, 2014

Program to read in 15 numbers and display them as follows //each number on a separate line

Code:

# include <stdio.h>
# define MY_ARRAY 15
int main(){
int i ;
printf("please enter 15 numbers

[Code] ....

Error that i get from compiler:
Error E2062 array1.c 14: Invalid indirection in function main()
Error E2062 array1.c 19: Invalid indirection in function main()
both pointing to the separate "scanf"

View 6 Replies View Related

C :: How Can A Multi-line String Be Read Line By Line

Mar 7, 2014

How can a mulitline string be read line by line

ex: str = "PERIOD="week"
DAY="day"
TIME="time"";

View 2 Replies View Related

C :: Command Line Arguments

Jul 28, 2013

I am using visual studio 2010 c++ express for C/C++ programming but is novice here to take command line arguments..i did went to project->properties->debugging and specified there the command line arguments but it didnt work..i think i need to know the format to enter the arguments.

View 9 Replies View Related

C++ :: Command To Get A Line From The User

Sep 16, 2014

int get_command_line (char * sa) {
char * s;
char * l = fgets(s, 300*5, stdin);
int i = 0;
int j;
int n;

[Code] ....

The aim is to have the function return the number of arguments made after assigning each of the arguments to a c string stored in an array of five pointers. This is how I declare this:

int main(void)
int n;
char s0[300];
char s1[300];
char s2[300];
char s3[300];

[Code] ....

View 1 Replies View Related

C++ :: Using File From Command Line

Apr 13, 2013

I'm trying to read in a file specified in the command line but I'm having some trouble. The command line entry specifies the inputfile preceded by '<' and the output file preceded by '>' like so

./program -v < input_file.cmd > output_file.cmd

This is what I've got so far.

int main(int argc,char* argv[]){
string strv="-v";
string input="<";
string output=">";
string str;
string input_file;
const char* in=input_file.c_str();

[Code] .....

This compiles ok, but when i run it using :

./program -v < test1.cmd

I get a segfault, if i cout argc it returns '2' where i would expect for this command line entry, I 'd get 4.

I'm not yet outputting to file, just to the screen so im not specifying an output file yet.

View 8 Replies View Related

C/C++ :: How To Know Command Line Is Empty Or Not

Mar 13, 2013

I am writing a c++ program in Linux.. I am reading a line from commandline at run time using "getline(std::cin,str);". now, what i want is if i left the commandline as idle (terminal as idle), then i want to know that the commandline is empty... is it possible ???

View 4 Replies View Related

C++ :: Compiler Command Line Arguments

Jun 15, 2013

I have found this C++ online compiler (to use when I am at work): Compile and Execute C++ online

When you write and compile a program, on the right side (the "output" side), you can read this command line arguments:

$ g++ main.cpp -o demo -lm -pthread -lgmpxx -lreadline 2>&1

What is the meaning of the following arguments? -lm [link the math header file, right?]

-pthread
-lgmpxx
-lreadline

Any book (ebook, tutorial, printed book, whatever) where I can find all (absolutely all) these and other possible arguments?

View 2 Replies View Related

C :: Reading A File Through Command Line

Jul 11, 2013

I'm currently working on making a program that is run through a GUI run through the command line. The program basically takes an app file and a boot file and runs it through a bunch of functions and generates a new outfile. Anyway I'm new to C and can't figure out how to code it so I can type the two file paths into the command line and read them into the function. Is it possible to do this within the "if else" statement?

Code:
int main(int argc, char *argv[]){
const char * const SrcFilePath;
const char * const SRecordPath;
const char * const FopIspFilePath;

[Code] ....

View 4 Replies View Related

C :: Simple Command Line Arguments

Jan 22, 2013

I tried the exercise 5 on page 312 of King's Book C programming A modern approach second edition. Write a program named sum.c that adds up its command line arguments which are assumed to be integers . Running the program by typing :

sum 8 24 62 should produce the following input

Total : 94

Use the atoi function to convert each command line argument from string form to integer form

My solution is :

Code:

#include<stdio.h>
#include<stdlib.h>
int main(int argc , char *argv[])
{
int i , sum=0;
}

[code]...

It is running good without problems but I am wondering because it is very small solution with few lines of code.

View 7 Replies View Related

C :: How Command Line Arguments Work

Aug 17, 2013

I want to see how the command line arguments work. However I don't know how to enter this input. show me a method to see if my code works?

View 9 Replies View Related

C++ :: Parsing Command Line Parameters

May 19, 2013

I have to make a c++ program, in which with an algorithm I have to code a text from a file and write it to another file. The input should like this: "code forCoding.txt toBeWritten.txt" ; or like this: "decode toBeReadFor.txt toBeWrittenIn". I have done everything except one thig: It is says I have to be able to input parameter.

How should i write this? I read [URL] ....., but still dont get. The input of my program has to have 3 strings, so I guess argc should be 3, but I dont really get it. What should I have in my main about this parsing command line parameters?

View 4 Replies View Related

C++ :: Entering Command Line Arguments?

Jan 11, 2015

I am not sure how to enter command line arguments when I run the executable of the file below. I want check an make sure that only two arguments get into the main() before running the rest of the code. I'm using bash on linux.

An example that I have tried to test for 2 arguments in command line -arg1 arg2 > ./a.out This of course does not work

#include <stdio.h>
#include <stdlib.h>
#include <errno.h>

[Code].....

View 4 Replies View Related

C++ :: Command Line Arguments In VS2013

Apr 19, 2014

I know you go the the debugger and pass them in. I just need to know the syntax. I know &(ProjectDir) goes first because the text file is in the project directory but how do I pass the text file in as well. The file's name is "tester.txt".

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved