I am unable to input the correct form for matrices multiplication. I have an exam tomorrow in which I need to use this.
Code:
#include <stdio.h>
#include <conio.h>
int main() {
float a[10][10], b[10][10], c[10][10];
int i, j, k, l, n=0, m=0, x=0, y=0, sum=0;
printf("Enter the number of rows and collumns of the first matrix");
scanf("%d %d", &n, &m);
[Code]...
when i am running this program no errors are being shown but as soon as i press ctr+f9 to run the program my tc++ window closes.....
Code:
#include<stdio.h>
#include<conio.h>
void multiply(int m1[50][50],int ,int,int m2[50][50],int ,int );
void main() {
int i,j,m,n,p,q,m1[50][50],m2[50][50];
[Code] ....
I am trying to change label text on button click, the way label.text = "string" work well before but not in this case. I tried to put this on other method and it work..it is just not working on the button that I would like to fire..
C# code :
protected void btnTotalGroupMember_Click(object sender, EventArgs e) {
string s = "there";
string[] words = s.Split(' ');
foreach (string word in words) {
Label1.Text = s;
[Code] ...
Program is to add two fractions together like so..
This program adds fractions. ‘Y’ continues, any other key exits program
===================================================
Enter numerator 1 ==> 1
Enter denominator 1 ==> 3
Enter numerator 2 ==> 1
Enter denominator 2 ==> 6
1 1 1
--- + --- = ---
3 6 2
-----------------------------------------------------
Continue? Y or N! ==> n
My question is that i need each input to be a number.
if a character is entered i want it to output something like..
This program adds fractions. ‘Y’ continues, any other key exits program
===================================================
Enter numerator 1 ==> 1
Enter denominator 1 ==> a
You need to enter a number here.
Press any key to continue.
and then clear the part where the letter was entered.
This program adds fractions. ‘Y’ continues, any other key exits program
===================================================
Enter numerator 1 ==> 1
Enter denominator 1 ==>
This is my code and it's not giving me the right output
Code:
#include <stdio.h>
int main() {
int dim;
int i, row, col;
// inputting matrices dimensions
int M0, M1, M2;
[Code] ....
The output should give me this:
Input 2
Correct Output 2 5 4 10
Ok so This is what the output of the program should be.
enter the count of input integers: 1
The count of the integers must be two or more. Please enter a valid number : 3
Enter integer #1 : 2
Enter integer #2 : -1
Enter integer #3:5
The positive numbers entered and their squares are:
2 4
5 25
My Code :
//header files
#include<stdio.h>
#include<ctype.h>
#include<string.h>
#include<math.h>
[Code].....
I would like to print a multiplication table, with the dimension n given as input. I attached how the table looks like for n=7.
How do you output the character "-" in that sequence? The first and last numbers have 13 "-" characters before and after them, but the numbers in between have 8 "-" characters.
List<Byte> Pt_split(string plain) {
List<Byte> pb = new List<Byte>();
// Byte p;
string p;
int temp = 0;
if (plain.Length % 2 != 0)
[Code] ....
I am trying to make a program that will read in input in the following format:
| ...text... || ...more text... || ...still more text...|
i.e. every bit of "text" that gets read in is bracketed on either side by the "|" character.
The buffer that i read them into can be of a maximum length of 101 (100 characters plus a terminating null character); this is how I am currently reading in the input:
char readString [100 + 1];
while ( fscanf(infile, "|%1000[^|]|", readString) ){
/*... manipulate readString ...*/
}
How might I design this program so that, should any of the text appearing between the "|" characters exceed 100 in length, it exits and returns a warning?
So I'm supposed to write something that will output a multiplication table from two user input integers between 2 and 10.
For example it should display like this is the user inputs 4 and 5
1 2 3 4 5
2 4 6 8 10
3 6 9 12 15
4 8 12 16 20
I was hinted to used two for loops and this is what I have thus far, what I can't figure out is how to display it like the example.
#include <iostream>
using namespace std;
int main() {
int num1;
int num2;
cout << "Enter two numbers between 2 and 10." << endl;
[Code] .....
So I'm writing a program that will read a text file and it will do certain "functions" the text file will be like a game, and the program will be able to run many different games. The problem i'm having is in one of the "functions" i believe it's the one meant to get a correct choice from a file and a user input and put them into strings, it gets the wrong input. I know this because i tested both strings the "function" writes too. it gets the correct file answer but the user input is always "c" for some reason.
#include "stdafx.h"
#include <iostream>
#include <iomanip>
#include <fstream>
#include <string>
#include <stdlib.h>
using namespace std;
int progfiles() {
[Code] ....
This is the code, most likely the section that is surrounded with "///" contains the problematic "functions." This is the command Line output...investigate why they're dieing or continue on your journey?(i-investigate/c-continue) got input and answer
i
c
i
Press any key to continue . . .
The got input and answer are tests to make sure it got both, the first 'i' is my input, the 'c' is what it says my input is, and the 'i' is the correct answer from the file. this is the part of the file that the program reads to get that output
"1 Do you want to go investigate why they're dieing or continue on your journey?(i-investigate/c-continue) 2 8 i 7 3 4 You continue on picking up speed to get to the egg first.. and.. Oh No, You accidentally bumped into the walls! 2 12 5 1 You go over, and as you realize the walls are acidic and that's why the other sperm are dieing.. 2 6"
The following program takes user input into two arrays and should then determine how many items are different by comparing them with a loop. The comparison always show zero correct answers.
#include <iostream>
using namespace std;
const int QUESTION = 20;
//class for testing grades
class TestGrader {
[Code] ....
Whats wrong with my code, I wasn't able to input for Lastname field.
#include <iostream.h>
#include <windows.h>
HANDLE console = GetStdHandle(STD_OUTPUT_HANDLE); // For gotoXY() function
COORD CursorPosition;
[Code]....
I'm having some problems with Input to an array from a file. I think that i need to make a new array for every instance of the loop but i can't figure out how.
Participator class
void Participator::read(ifstream &stream){
getline(stream, name);
getline(stream, address);
stream >> paid;
}ParticipatorRegister class
void ParticipatorRregister::readFromFile(){
[Code]...
Something is wrong when i try to pass the struct as a input argument
Code:
#include <stdio.h>
#include <string.h>
#define MAX 20
void printBook(cataT book);
int main(void){
typedef struct cataT{
[Code]...
I am trying to extract unsigned values from an input stream. I expect the extraction to fail when an invalid character is extracted. It fails correctly when I try to extract an unsigned int from "abc", but when I try to extract an unsigned in from "-1", the extraction succeeds, and the max unsigned int value is extracted (as if -1 were cast to unsigned int). I would expect the '-' to cause the extraction of an unsigned value to fail.
The code I am using is below.
#include <iostream>
#include <sstream>
#include <string>
#include <limits>
int main() {
unsigned int value = 8;
std::string negString = "-1";
[Code]...
Is this standard behavior for an istream extractor?
I am trying this in both Linux (gcc 4.4.3) and in windows with Code::Blocks (whaterver came with CB 13.12, apparently gcc 4.7.1)
I'm having issues trying to input data from a .txt file into my array program. The whole program takes the name, # of goals and assists, adds them together to get points, and then puts in a given + or - rating. The program works except for the data input.
Also, this is an alphabetical "Unsorted" list, but is there a way to order the list based on point value and be able to display that as well as a separate "Ordered" list?
#include <iostream>
#include <iomanip>
#include <fstream>
#define NUM_PLAY 30
using namespace std;
int buildArrays(int[], int[], int[]);
void printArrays(string[], int[], int[], int[], int);
[Code]...
And this is the .txt file. Order is Players Name, Goals, Assists, Plus/Minus rating. The points are added when points = goals + assists (Should be in the main coding above).
Bryan_Bickell 2 5 +2
Brandon_Bollig 0 0 0
Dave_Bolland 4 2 -1
Sheldon_Brookbank 0 0 -1
Daniel_Carcillo 0 1 +3
[Code]...
I'm trying to write a program that takes input from the user (thats a char) and outputs it to the monitor in hex form.The program is meant to continuously take input from the user then output to the monitor in hex form until an EOF is detected this triggers the program to close.The following code does this except that I get a lower case 'a' at the end of each output.I think the 'a' has to do with the enter key and if that is the case how can i tell the program to ignore this input from the user.
Example: input from user: ABC output to monitor: 41 42 43 a
Code:
#include <stdio.h>
int main(void) {
char myChar;
while(EOF != (myChar = getchar())) {
printf("%x ",myChar);
}
system("pause");
return 0;
}
Figure this out using [TURBO C]
Create a program that will let the user input an amount in the form (367). The Program should determine the no. of coins for each dominations : 50,25,10,5,1. (using Turbo C)
How to print a year like DIGITAL CLOCK NUMBER for any input four digit number ...
For example if input 1000 the output should be 1000 but each number should look like this in the block form for example number 0 is, don't mind those stars, i did not know to print it here, that is number zero ...
======
=****=
=****=
=****=
======
How can I write program that can convert an input string into a form that only the first letter of the string is a capital letter and the rest is lower-case?
View 3 Replies View RelatedI have a non form class. I want to update label/ check status of check box etc.. in non form class ( here resides functions that contains logic). How can i do that ?
View 4 Replies View RelatedI hav created mdi parent form that contain one user control. I want to access that user control from one of the child form
View 4 Replies View RelatedThis is more of a Application Design question, Let's say I have Form1(Login), this is opened from Program.cs, when the user enters details, the Event Handler makes a instance of a class, adds the data and stores the instance within Program.cs class.
So the best thing to do here, is to close the Form1(Login) and open Form2(Main) via Program.cs so that I can send the List<Login> object with my Login instance objects to said form. This form will remain open throughout the applications use as it's like the main GUI for all the programs functions.
When I close this form, I may want to save some information before the application is terminated, so I may as well store the Login instances in Program.cs anyway.
Main stepping stone: Multiple (usually around 3 max) users can login this system if need be, which will mean closing Form2(Main) and then opening Form1(Login) so that once Form1 is closed it can recreate the From2(Main) form and pass the new List<Login> to that form.
What's the best way to do this, at the moment i'm creating the Form2 instance like so:
//....
//Detect the Login form being closed
loginForm.Closed += new EventHandler(OnLoginClosed);
//...
//Open the main form when the login is closed
private void OnLoginClosed(object sender, EventArgs e)
[Code] .....
This seems like it will work and do the job, but is there a better and cleaner way? The List<Login> will be passed to Forms which are created via Form2(Main) as this information will be needed. It's just that ive been told not to use Forms for too much data containment.
I have a form with 2 text boxes (Email and Password)
The user fills in the text boxes and clicks on the Log in button. The code behind the log in button does the following, First connects to a table (Users) in phpmyadmin. Next runs a SQL query (SELECT * FROM `users` WHERE Email = '" + sEmail + "' AND Password = '" + sPassword + "'") sEmail being the variable created from the text entered in Email text box and the same for password.
Next if the record count == to 1 it opens up the main menu form and if the record count == 0 it fails and the user does not get to the main menu.
All of the above is fine and working however what I want to do is take over a variable from the log in form to the other forms.
The code is below for the sign in button as all my code is behind that (I think this may be where I'm going wrong).
public partial class WelcomeForm : Form{
public static string connStr = "server = localhost; " +
"database = ppw5; " +
"uid = James; " +
"pwd = buster;";
[Code] .....
And the Main menu form where I'd like to take a variable over with me, lets assume the variable is the UserID from the database table that I pull from the dTable I created.
public partial class MenuForm : Form {
//Call the CloseProgram class and create a new method called ClassClose.
CloseProgram ClassClose = new CloseProgram();
WelcomeForm User = new WelcomeForm();
public MenuForm() {
InitializeComponent();
[Code] .....
I have a program which when a button is clicked on Form1 it runs a vision system operation on an image in a window on a Form1. There are also other buttons on the Form1 which can change things like threshold levels so the inspection can be run again with different settings. It all works fine but I want to change it to remove the buttons from Form1 so that when the user clicks on a button on Form1 it opens up another form, Form2, and all the buttons which were on Form1 are now on Form2 and the image analysis should run on Form1 when the buttons are used on Form2. I have taken over all the code from Form1 to Form2 and I'm trying to make this happen by creating a new oject on Form1 which calls a method on Form2 which contains the code which was in Form1 and called when the button was clicked on Form1 - not working!! I have a constructor in Form2 but I think I have become monumentally confused.
This was the code which was on Form1 when the inspection button was clicked.
private void cmdInspectOnce_Click(object sender, EventArgs e)
{
iReturn = VisionSystem.InvModeSet(IpeEngCtrlLib.I_MODE.I_EXE_MODE_ONCE);
if (_imgEngines!=null && _imgEngines[0]!=null)
_imgEngines[0].cmdInspectOnce();//InvModeSet(IpeEngCtrlLib.I_MODE.I_EXE_MODE_ONCE);
}