C++ :: Read A File With 2 Numbers In It - Nested For Loop
Mar 17, 2013
I am attempting to read a file with 2 numbers in it. The first indicates the number of rows the second, the number of columns. So for a file (Data.txt) that contains the numbers 5 7, I want to display
0 0 0 0 0 0 0
1 1 1 1 1 1 1
0 0 0 0 0 0 0
1 1 1 1 1 1 1
0 0 0 0 0 0 0
and write that output to a file.I can display the correct number of rows and columns but I can't figure out how to display alternating rows of 0's and 1's.
#include <iostream>
#include <fstream>
using namespace std;
int main() {
ifstream inFile;//declare file
[code]....
View 5 Replies
ADVERTISEMENT
Nov 15, 2012
My program involves trajectory planning using cubic spline method for a robotic arm. In the process, I had to calculate joint angles for each point in the path. In the last few lines of the code I need to write the values for counter and theta1 into a text file which I called "Test.txt". I am doing this using a nested for loop(the counter runs until it reaches 19 and hence need 19 theta1 values corresponding to it). However, I can't get all the theta1 values transferred to the text file.The statement within my inner loop is wrong and don't know how to fix it.
for(i=0;i<num_via;i++){
current_time = GetTickCount();
//joint[0] = mult_joint[i][0];
//joint[1] = mult_joint[i][1];
//joint[2] = mult_joint[i][2];
//joint[3] = mult_joint[i][3];
[code]....
View 3 Replies
View Related
Apr 3, 2014
I wrote this code, and everything was working well, but part of the assignment is that it must include nested loops. Once I added the nested while loop, which is basically an if statement, my life was ruined. I am trying to nest a loop in the code that will basically tell the compiler that if the value "loopVol" were to exceed the value of "final" after adding an increment, to run the program for the "final". How can I do that?
Example:
initial = 10
final = 123
increment = 10
as of now, the program would stop at 120, but I want to nest a loop that will tell the compiler to calculate at the final if this happens.
#include <iostream>
#include <iomanip>
#include <stdio.h>
[Code]......
View 3 Replies
View Related
Mar 27, 2013
Write a program which reads a stream of numbers from a file, and writes only the positive numbers to a second file. The user should be prompted to enter the names of both the input file and output file in main(), and then main() will open both files. Another function named process() must then be called to read all the numbers from the input file and write the positive numbers to the output file. Note that you must pass the open stream variables for each file as arguments to the process() function, and that you need to (always) double check that the files opened successfully before using them.
This is what I have so far but its not working out!
#include <iostream>
#include <fstream>
#include <stdlib.h>
using namespace std;
int process(ifstream &inf, ofstream &outf);
[Code] ....
View 1 Replies
View Related
Mar 25, 2013
This code is used in scientific calculation for optimization problem.
Basically a particle is moving in a three dimensional space, its position is (x,y,z).
At each position, there is a fitness value associated with that position.
The fitness value is given by fitness(x,y,z) (code line 12~19).
We need to find out, when the particle moves around randomly, what is the highest possible fitness value.
To solve this, below code is used, and it produces correct result.
#define DIMENSION 3
#define MAXX 4
#define MINX 0
#define MESHsize 1
#include <iostream>
using namespace std;
float maxValue = 0.0;
[Code] ....
The output of the code:
[ fitness(0,0,0) = 0] [ fitness(0,0,1) = 1] [ fitness(0,0,2) = 4] [ fitness(0,0,3) = 9]
[ fitness(0,1,0) = 1] [ fitness(0,1,1) = 2] [ fitness(0,1,2) = 5] [ fitness(0,1,3) = 10]
[ fitness(0,2,0) = 4] [ fitness(0,2,1) = 5] [ fitness(0,2,2) = 8] [ fitness(0,2,3) = 13]
[ fitness(0,3,0) = 9] [ fitness(0,3,1) = 10] [ fitness(0,3,2) = 13] [ fitness(0,3,3) = 18]
..... so on
Answer: highest fitness = 27
Note: In this case, the values of x,y and z is integers from 0 to 3 inclusive.
For 3-dimensional space above, actually the code had run through 3 nested "for" loops.
Question: Above code works for 3-dimensional space. How to generalize the code, so that it works also for N-dimensional space, where N is an arbitrary integer?
( Note: possibly N = 30 )
View 19 Replies
View Related
Nov 3, 2014
I'm trying to output a pattern using loops. The pattern is a plus symbol made of 3 rows of 5 x's followed by 3 rows of 15 x's and finally 3 rows of 5 x's.
I can get the program to output all 9 rows with 5 x's but I don't know how to do the 3 rows of 15 in the middle. I have tried a while loop and also an if statement but nothing seems to work.
#include "stdafx.h"
#include <iostream>
#include <iomanip>
[Code]....
View 8 Replies
View Related
Oct 30, 2013
My function is only reading the first line of numbers even though I have the loop to keep returning to it in main(). How do I have it read from the file until it runs out of data to retrieve?
File being read
90 83 94
72 65 81
File being sent the data(Only the second average is correct, working on the first)
Student Information
Student IDGradeAverageLetter Grade
1895612
90 83 94
289
90 83 94
#include <fstream>
#include <iostream>
using namespace std;
ifstream infile;
ofstream outfile;
void grades(int&,int&,int&); // Grades from the input file
int myavg(int,int,int); // Calculates the Average of the 3 grades
[Code] .....
View 8 Replies
View Related
Mar 14, 2014
Code:
while(x==1){
for (i=0;i<j;i++)
{if (word1[i] == word2[i])
{prefix[i]= word2[i];
counter++;}
else
x=2;}
Basically after the 3rd run of the for loop, it encounters a contradiction. I want it to exit right there and then. Instead it continues to run the for loop. What can I do?
View 4 Replies
View Related
Feb 9, 2014
I was wondering how I could use a continue statement that continues in a nested loop. For example if I have
for (int i=0;i<amount;i++) {
for (int j=0;j<I[i];j++) {
for (int k=j+1;k<I[i];k++) {
if (P[i][j]+P[i][k]==C[i]) {
//What should be here?
}
}
}
}
If the condition is met then the most outer loop (in i) should continue to the next iteration.
If i simply fill in continue; in before the comment then it only continues the loop in k so that is not what I want.
View 5 Replies
View Related
Mar 13, 2013
How to make triangles using c++, in nested while loops.
The triangles were:
*
**
***
****
*****
******
*******
********
*********
**********
I have made a code for this:
int counter=1;
while (counter<=10){
int counter2=1;
while (counter2<counter){
[Code] .....
I was not quite sure about this one.
View 5 Replies
View Related
Jan 6, 2014
how to draw a flow chart for following nested loop?
for(int r=1;r<=5;r++){
for(int c=1;c<=r;++c){
cout<<c;
}
cout<<endl;
View 1 Replies
View Related
Feb 17, 2013
I'm writing a series of basic decipher programs and I have run into an issue where I get the correct answer when I start the loops at the iteration that contains the correct answer.
Code:
// generate key "words" with length of 3
for (int x = 0; x < 26; x++){
for (int y = 0; y < 26; y++){
for (int z = 0; z < 26; z++){
[Code] ....
This is the essence of the loop, I've attached the program in its entirety if necessary. Basically what happens is if I start the loops at x = 17, y = 7, z = 12, then I get the correct decipher shifts but if I start at 0,0,0 whenever it gets to that iteration (12,000 ish) the shifts are off by 2 or 3. "koq" should translate to "the" but im getting "dcz". Is this a simple bug in the or is something moving to fast for something else to keep up?
l3_ws.txt
main.cpp
View 1 Replies
View Related
Feb 28, 2013
What does the following nested loop output ?
count = 1;
while (count <= 11) {
innerCount = 1
while innerCount <= (12 - count) / 2) {
cout << " ";
innerCount++;
} innerCount = 1;
while (innerCount <= count) {
cout << "@";
innerCount++;
} cout << endl;
count++;
}
View 9 Replies
View Related
Jun 3, 2014
I would like to do something like this:
for (int i=0; i<5; i ++)
{
for (int j=0; j<5; j++)
{
//* CREATE A NEW FILE FOR WRITING * //
}
}
I don't know how to create a new file that doesn't get overwritten each time the loop runs.
View 13 Replies
View Related
Apr 20, 2014
The question is "Write a program that uses a while loop to read a set of integers from an input file called "data.txt" and prints the total number of even numbers read from the file."
Code below is the program I have created so far. I keep getting the window to pop up but not stay up so I am assuming I am doing something wrong.
#include <iostream>
#include <fstream>
using namespace std;
int main() {
std::fstream input("data.txt");
if (!input.is_open()) {
std::cout << "There was an error opening data.txt";
[Code]...
View 5 Replies
View Related
Oct 29, 2014
We were discussing how to find average time complexity of different algorithms. Suppose I've a the following nested loop
for(int i=0;i<n;i++)
{
min = i;
[Code].....
Now the outer loop will iterate N times. the inner loop will always iterate 3 times no matter what the value of N is. so the worst case time complexity should be O(n^2) but what about the average case and the best case? I mean in terms of searching we can figure out and distinguish between the worst,best and average as it depends upon the number of comparisons. But here how can the average and best case be different then the worst case.
View 13 Replies
View Related
Jan 20, 2014
So I have this problem with not being able to iterate over a vector in a nested for-loop. Here's the nested for-loop:
bool innerHit = false;
for (std::vector<Sprite*>::iterator outerIter = sprites.begin(); outerIter != sprites.end() && (!sprites.empty()); outerIter++) {
Sprite* spriteOne = *outerIter;
for (std::vector<Sprite*>::reverse_iterator innerIter = sprites.rbegin(); innerIter != sprites.rend() && (!sprites.empty()); innerIter++) {
Sprite* spriteTwo = *innerIter;
[Code] .....
What happens is, after having called the collisionDestroy-function and the program tries to execute the nest loop in the outer for-loop, it all crashes with the text "Expression: vector iterator not decrementable", which I understand is because the iterator will have already become useless. The question is: know this, how do I fix it? I can't seem to get a hang of it.
Here's the collisionDestroy-function (the collisionReaction does nothing but sets a few local variables):
void Enemy::collisionDestroy(std::vector<Sprite*>& sprites) {
for (std::vector<Sprite*>::iterator iter = sprites.begin(); iter != sprites.end(); iter++) {
Enemy* tmp = dynamic_cast<Enemy*>(*iter);
if (this == tmp && collisionType == 3 || collisionType == 1) {
sprites.erase(iter);
break;
}
}
}
View 14 Replies
View Related
Sep 28, 2014
I'm new to programming and i'm trying to do a certain task. I want to use a for loop to read certain data from a txt file and print them to a console. I'm trying to read student names and their grades.
Something like
3 // 3 represents the number of students.
George 97
Sarah 70
Maya 88
The data may vary but it's always in this format.
View 14 Replies
View Related
Nov 2, 2014
ok so I have three numbers in a file that I called in a function and I want to use all three numbers from that file in another function how can I??
View 9 Replies
View Related
Sep 20, 2013
I want to write a c++ code, which will read in a file like this:
A: 10
B: 20
C: 30
while in the code, I would need the value of A B C, how can I let the cin ignore the labels like A:?
of course, I can write a file as
10
20
30
.
.
.
and use cin>>A>>B>>C; to read in those
but in this way, when the number of values increase, it is really hard to remember who is who?
View 5 Replies
View Related
Mar 7, 2013
I am trying to get this code eventually to read in a maze file to move the smiley face around in. But right now my current snag is the yes or no to enter the for loop.
#include <iostream>
#include <windows.h>
#include <conio.h>
#include <time.h>
using namespace std;
int main() {
int name;
char ans;
[Code] .....
View 3 Replies
View Related
Mar 10, 2013
I'm having trouble with how to find the count and sum of all numbers.
The file, called question1.txt, contains numbers:
1
2
3
4
5
0
0
0
-2
-2
Here's my code:
Code:
#include <stdio.h>
#include <stdlib.h>
int main (void)
{
FILE* spIn;
FILE* spOut; //for output file
int numIn;
[Code]...
View 1 Replies
View Related
Jun 26, 2014
Ok here I have a program that reads a word from a text file randomly and matches it with the definition. The user has to guess what the word is according to the definition.
I'm having trouble with my for loop, I'm not getting any errors. But I just know something is off.
Here's my code:
#include <iostream>
#include <fstream>
#include <string>
#include <cstdlib>
#include <ctime>
using namespace std;
int main(){
int number;
int count = 0;
int numOfGuess = 0;
[Code] ...
This is words.txt:
apple#the usually round, red or yellow, edible fruit of a small tree
boat#a vessel for transport by water
horse#a solid-hoofed plant-eating domesticated mammal with a flowing mane and tail, used for riding
television#a system for transmitting visual images and sound that are reproduced on screens
soup#a liquid dish, typically made by boiling meat, fish, or vegetables, etc.
bottle#a container, typically made of glass or plastic and with a narrow neck
barber#a person who cuts hair
toast#sliced bread browned on both sides by exposure to radiant heat
radar#a system for detecting the presence, direction, distance, and speed of aircraft, ships, and other objects
red#of a color at the end of the spectrum next to orange and opposite violet
View 1 Replies
View Related
Nov 3, 2013
My project's goal is to read some numbers from input file,then create a grid.my input file is:
2 3
3 4 5
1 2 4
first line is rows and colums. second and third line the grid location values.My code is
#include <iostream>
#include <fstream>
#include <cstdlib>
#include <string>
#include<vector>
using namespace std;
[code].....
View 7 Replies
View Related
Apr 6, 2013
1. Construct a class diagram that can be used to represent food items. A type of food can be classified as basic or prepared. Basic food items can be further classified as meat, fruit, veg or Grain. The services provide by the class should be the ability to enter data for new food, to change data for food and to display existing data about food.
using this class definition write a main program to include a simple menu that offers the following choices:
1. Add food
2. Modify Food
3. Delete Food
4. Exit this menu
2. Read a list of numbers from a file and then print them out in reverse order. State whether the list is palindromic or not.
View 2 Replies
View Related
Nov 11, 2013
I need my program to read a list of numbers from and input file, random.txt, and calculate the following statistics on those numbers:
A. The number of numbers in the file.
B. The sum of all the numbers in the file.
C. The average of all the numbers in the file.
D. The largest number in the file.
E. The smallest number in the file.
#include <iostream>
#include <fstream>
#include <iomanip>
#include <string>
[Code]......
This is what I have so far but I'm not sure if it is right. I can't get the input file to open.
View 3 Replies
View Related
