I create a list of vectors (a vector of n vectors of m elements).
std::vector <std::vector <int> > vsFA (n, std::vector<int>(n));
How I assign values? I try below, but not worked
void armazenaFA( std::vector <int> &vFA) // this function only knows about vFA
{ vsFA[n] [m]= simTime().dbl();
OR
vsFA[n].push_back(simTime().dbl());
}
I am writing code to access vector elements as, to print first "n" elements of vectors out of its total N elements at a time.
For example, Total vector elements : N= 23
Want to print n elements at time : n =3
How this can be explored using vectors?
we conform to the ISO C standard and this snippet of code : Code: vector<tree*> *leaves = new vector<tree*>[num_threads]; where num_threads is specified from command line arguments so not dynamically allocating it violates the standard.
Let's also assume num_threads is greater than one.
What I want to do is scan each vector in leaves for duplicates. If any two vectors in the set have matching addresses, they both immediately go onto the "unsafe" pile and will no longer be subject for testing.
If a vector clears one vector, we test it against the others in the set.
So if we have 3 vectors, A, B and C we test A against B then A against C. For efficiency, we then then just test B against C.
Like I said, I want a "safe" and "unsafe" pile. Every vector in "safe" is fully unique while every vector in "unsafe" is not unique.
I thought about just using a for-loop to loop through leaves and then iterate through each element but I'm not sure if that'll work just right out of the box.
I can't compile this code as I am at work and the computers are security protected, So i''l have to wait until i get home to test this, but I am pretty sure I am wrong. The problem is I have to create two vectors with 10 elements and input random numbers into it, then pick one of the elements of the second vector at random and append it to an element from the first vector at random. This has to be done 10 times and the I am assuming i have to print the 10 results. This is what I have:
#include <cstdlib>
#include <ctime>
#include <iostream>
using namespace std;
int main() {
vector<int> random (10);
[Code] ....
This is probably a very basic question, but I need to create two vectors and then loop through the vectors and output each pair that is found.
The user will input min1 and max1 with step1 for the first vector and min2 and max2 and step2 for the second vector. Then the loops will go through and return the combinations will return each pair of the two vectors.
So if I input min1=1 and max1=10 and step1=1 and same for vector two the return would be:
[1,1]
[1,2]
.
.
.
[10,10]
This is for part of a homework assignment, but I can't continue on the assignment without first getting this simple part to work.
I am unable to imagine implementation of deque as it promises random access,insertion and deletion at both ends in constant time.
If a deque is implemented as vector of vectors how it can do 'random access' & 'insertion/deletion at the front' in constant time?
I thought that C++0x made it possible for vectors to be initialized with an initializer list, such as:
Code: vector<vector<string> > vv {{"hello", "goodbye", ""}};
I tried this syntax in both VS 2010 & VS 2012 Express For Desktop, and I get the same error in both compilers:
compiler error: non-aggregates cannot be initialized with initializer list
To put the code above in context, I'm going to have a .txt file with hundreds of thousands of string arrays, in initializer list format, such as:
{"string","string","string","","",""},{"string","string","string","","",""},{"string","string","string","","",""}...and so on
The first 3 strings in each array will be non-zero in length, and the last 3 strings in each array will be empty, as shown above.
I want to be able to cut and paste the arrays right into the declaration, either with:
string arrayOfArrays[0][6] = {{"string","string","string","","",""},{"string","string","string","","",""},{"string","string","string","","",""}...and so on };
or
vector<vector<string> > vecOfVectors = {{"string","string","string","","",""},{"string","string","string","","",""},{"string","string","string","","",""}...and so on };
I know I can do the first, but apparently the second declaration method with vectors won't work. I would like to work with vectors, but I'm not sure about the initialization. The .txt file will be what it is, so the initialization will have to be able to work with its 'array-like initializer' format.
I need manipulating a set of containers. I created a vector that contained vectors of objects:
std::vector< std::vector<Terrain> > mapArray(num1, std::vector<Terrain>(num2));
where num1 and num2 are arbitrary numbers. and Terrain is the class of objects I'm trying to store.
I want to be able to use push_back on both the main vector and the vectors within the mapArray vector but I'm unsure of how to target the inner vectors with push_back. How to dynamically store a 2D array of objects.
How would you search through the a list of vectors? I have a upper case letter at the start of the lists and corresponding lower case letters in vectors how would I search through it to see how many times the corresponding lower case letter was repeated?
View 1 Replies View RelatedBasically I need to make a program which asks for a business name and then keeps asking for more until user doesn't want to. Once more than 1 business is enter it should display the business and sort it alphabetically and keep displaying them each time another is added. I am lost on how to store the added business, sorting it and displaying the list.
Here is what I have so far.
#include <iostream>
#include <string>
#include <algorithm>
#include <vector>
using namespace std;
int main () {
string business_name;
char selection;
[Code] .....
Say I have 5 vectors of unsigned char each of size 5. I want to take the max of each index and store it in a new vector. What is the most optimal way to accomplish this?
My slow code:
Code:
vector<unsigned char> vec1;
vector<unsigned char> vec2;
vector<unsigned char> vec3;
vector<unsigned char> vec4;
[Code]....
I want to add 2 vectors to print out so that there on the same line. What I am trying to make is an inventory system that will use 2 vectors to keep the pounds of the item and list the 2 vectors on one line.
(I am using Microsoft Visual C++ 2010 Express)
Like this:
0. empty 0
1. empty 0
2. empty 0
etc...
Right now it looks like this:
0. empty
0. 0
The code:
#include "stdafx.h"
#include <iostream>
#include <vector>
#include <string>
#include <fstream>
#include <cmath>
using namespace std;
int main() {
vector<string> inv;
[Code] ....
I have a vector I want to add book titles to, then i want to print my updated vector. This is best I have come up with but the program fails at the getline line. why?
string book;
cout << "Enter book to add: "<< endl;
getline(cin, book);
books.push_back(book);
for(int i = 0; i < books.size(); ++i) {
cout << i+1 << ". " << books[i] << endl;
}
My question is not in c++ programing , but because my aim is to make code that calculate the three angles between two vector i ask my question here
So as the title i have three point that create two vector and I want to get the angles in x,y and z of the point2
I used crosproduct that give me one angle without axe , I don't know in which axe this angle
My aim is the three angles for the 3 axes ....
I can't figure out the error in this code; it compiles but returns rubbish.
serge
#include <iostream>
#include <iterator>
#include <vector>
#include <algorithm>
[Code] ......
I try to use quaternion to rotate one(and later more!) 3d-vectors in a general manner.
i read in wikipedia, that the general calculation goes with:
vector_rot = quaternion * vector * quaternion_compl.conj.
I used the class of irrlicht [URL] .... to do the calculations.
there is no premade function in this class to rotate vectors through this quaternions, so i just tried to it this way:
irr::core::vector3df v1(1,0,0);
irr::core::quaternion a1(2,3,4,6);
a1.normalize();
irr::core::vector3df result2(a1.X*v1.X*(-a1.X),a1.Y*v1.Y*(- a1.Y),a1.Z*v1.Z*(-a1.Z));
result2 should then be the rotated vector, but it does not work. i dont know how to explicitely write down the rotation specification in this topic.
I'm trying to make it like a game. You would fire your gun, then have the option of reloading. If you run out of ammo and try to fire...it will automatically come out of your cache. Anyone who played a 3rd or first person shooter knows what I mean. I thought vectors would be the best course of actions since they can remove and add elements with ease. One of the many problems I have is subtracting the Hand Guns current ammo (size) from its maximum (capacity) to see how much to A. push_back into the clip and B. pop_back out of the cache. Can size() and capacity even be subtracted? Here's the code with what I believe to be all the possibilities.
#include<iostream>
#include<vector>
using namespace std;
int main(int argc,char** argv) {
vector<int> HG_cache (36,1);
vector<int> HG_clip (12,1);
char user_input;
[code]....
The following code works perfectly with "normal" C++
#include <iostream>
#include <vector>
int main() {
std::vector <std::string> hello {
[Code] ....
This prints "HELLO" on the screen. A function a bit more like NCurses is:
for (std::vector <std::string>::const_iterator it = hello.begin(); it != hello.end(); it++) {
std::string temp = *it;
std::cout << temp.c_str() << std::endl;
}
This still works with "normal" C++. Now, how do I get this working with NCurses? I tried
#include <curses.h>
#include <string>
#include <vector>
int main() {
initscr();
[Code] ....
But this just gives me an empty screen.
This is possibly more of an algorithm question rather than c++ related.Suppose I have two vectors:
std::vector<double> first = {1.0,2.01,3.05,4.05};
std::vector<double> second = {1,2,3,3,4}; // very similar except no decimals and a second "3"
And now I want an algorithm that will tell me how similar these two vectors are. That is, I want to know how much of first is similar to second.
I am trying to use push back in a 2D vector but I don't know how to. This is what I have:
vector <vector <BigInt> > matr;
for (BigInt i=0;i<rij;i++) {
for (BigInt j=0;j<kolom-1;j++) {
matr.push_back().push_back((i+1)^(pow-j));
}
}
I quickly invented something but that doesn't work obviously. it should be equivalent to this: (the only problem in the code below is that those indexes don't exist yet that's why I need push_back())
for (BigInt i=0;i<rij;i++) {
for (BigInt j=0;j<kolom-1;j++) {
matr[int(i)][int(j)]=(i+1)^(pow-j);
}
}
I my code i have a base struct ...
Then others structs made ...
struct base{};
struct a1 : base {
int a;
int b;
[Code] ....
Now i must deposit all these containers(maybe & of containers) in another vector...
How i can do that? Can i write
vector<vector<base*> > all;
all.push_back(&v1);
all.push_back(&v2);
I have a vector of vectors declared as:
vector<vector<int>> v;
My program works fine with a small number of insertions to v. However, with a huge number of insertions my program stops working without telling me the reason... I guess that vectors might not grow after a certain size (im not sure)
1. What is the maximum size that a vector of vectors can grow?
2. I'm using Microsoft visual studio 2012, Is their anything I can do with the settings to increase the size of my vector? something beyond 1000000 rows?
I've seen code examples for assigning 2 dimensional vectors, but I haven't seen code for assigning more than that. I tried to create a 3 dimensional vector, and the only code the IDE didn't complain about was
int x = 2;
int y = 2;
int z = 2;
vector < vector < vector <string> > >stringvec;
stringvec.assign(x, vector <string>(y), vector <string>(z));
Would this be the correct way of producting a vector[2][2][2]?
I have a doubt and I have two vectors to a function.
A vector is (int *, const int) and the other is (string *, const int) and want to spend the two vectors and unite in a single function
A vector is passed to a function, but spending two vectors and join I cannot find the turn.
try (int *, const int, string *, const int)
But only understands the former as I do
I have a CSV file that is formatted in the following way. The top row contains headers and the data is below. I have opened the file (sec2011) in Numbers on Mac and saved it as a csv. I would like to read each of the columns into a vector, but I can not get the code to even open the file.
secid,date,low,high,close,volume,return,cfadj,open,cfret,shrout
101310,03JAN2011,181.21,186,184.22,5331413,0.023444,12,181.37,12,448837
101310,04JAN2011,183.78,187.6995,185.01,5033144,0.004288,12,186.15,12,448837
ifstream infile("sec2011.csv");
if (!infile) {
cerr << "Couldn't open file!"<<endl;
return 1;
This code always returns the Couldn't open File text.
What am I doing wrong. I know the above code doesn't put the data into vectors, but I can't even get the file to read.
I'm trying to solve Project Euler 16 where you have to calculate 2^1000. SO I made a program that would solve multiplying a number b a single digit factor through manual multiplication in a vector, just to test things out.
The problem is when I take things out of main and try to make a separate function, the original number is never multiplied.
Here's my code with functions...
/*Using vectors manually to multiply a number to a positive power.*/
#include <iostream>
#include <vector>
using namespace std;
void print_vector(const vector<int>& v);
[code]....
Here is the other code, not using functions but even if I use an extra for loop to multiply by the same factor several times, it still does the same thing.
/*Using vectors manually to multiply a number by two (or any single digit factor).*/
#include <iostream>
#include <vector>
using namespace std;
void print_vector(const vector<int>& v);
[code]....