I want to autogenerate employee id when user enters details of employee
Conditions:
User Selects Department which should be used as prefix.
A new Sequence of numbers must be generated for each department
Example:
DeptA0001
DeptA0002
Again DeptB new seuquence must be started
DeptB0001
DeptB0002...
Ok, so this assignment is to create a structure that allows input for up to 6 employees that then makes a 6 structure array showing Employee ID, Employee Last Name, Employee Pay Rate, Employee Hours Worked, Employee Pay, and Total Gross Pay for All Employees.
I don't have a printf yet for total gross, but right now I am just trying to tackle the input. Obviously I am not doing it right because although gcc complier is not giving errors the program is not ending when I type 'q' (sentinel issue) or when I reach 6 employees. It just continues input forever. Here is my code so far:
Code:
//Cameron Taylor
#include <stdio.h>
#define MAXARRAY 6
struct Record{
int idnum;
char lname[20];
double pay_rate;
[Code] ........
Okay, I'm not entirely certain where my code is messed up, but when I run the console it asks if I want to add Employee information and then it just skips through everything when I say yes.
#include <iostream>
#include <iomanip>
#include <string>
[Code].....
refer to this image: [URL]
program for calculating overtime payment of an employee?
I have written a program that stores employees in a database object. You can Add, hire, fire, promote, demote, and display employees. The program uses an interface, a database class, and an employee class with member functions.
The strange behavior is in my switch statement in interface.cpp. I have a '#' that represents a command line. Add and Display functions are ok, but if I hire, fire, promote or demote. It will display '##' for the next input. I ran the debugger and after hire/fire/promote/demote is called, the first if-statement goes to 'else' and I'm trying to figure out why.
Note: main() calls mainMenu() to run the program
// interface.cpp
#include <iostream>
#include "database.h"
#include "display.h"
void mainMenu() {
displayMenu();
Database* employeeDatabase = new Database();
[Code] .....
Here are the two classes...
// database.cpp
#include <iostream>
#include <vector>
#include <memory>
#include "employee.h"
#include "database.h"
using namespace std;
[Code] .....
I am having some trouble with my class assignment. We need to write a C program that will calculate the employee salary. There are 5 employees that will need to be calculated. We are required to use a loop also.
So far this is what I have but I am receiving errors when running the program.
#include <stdio.h>
int main() {
int clock_num; /* employee clock number */
float gross; /* gross pay for week (wage * hours) */
float hours; /* number of hours worked per week */
float wage; /* hourly wage */
/* Prompt for input values from the screen */
printf ("This is a program to calculate gross pay.
[code]....
getting output from my code when I compile, the codeblocks ide doesnt show any errors it just doesn't give me any out put when I compile?
Here is my code:
#include <iostream>
#include <string>
#include <iomanip>
using namespace std;
//
//CLASS DECLARATION SECTION
[code].....
This refers to an ATL COM DLL project. I can successfully create a class hierarchy of objects, ie. say, one class is the TEAM, which then holds other objects, say, a leader and a secretary, both of which are Employee Classes . Here goes my question:
a) In the Team.h header file I declare m_pLeader as a CComPtr<IEmployee>
Code:
classATL_NO_VTABLE CTeam :
public CComObjectRootEx<CComSingleThreadModel>,
public CComCoClass<CTeam, &CLSID_Team>,
public IDispatchImpl<ITeam, &IID_ITeam, &LIBID_BUOBJ05Lib, /*wMajor =*/ 1, /*wMinor =*/ 0>
{
private:
CComPtr<IEmployee> m_pLeader;
CComPtr<IEmployee> m_pSecretary;
b) The Employee Class is defined within this ATL COM project.
c) In the Team.cpp file, I create an instance in the FinalConstruct code, the focus is on the CEmployee
Code:
HRESULT CTeam::FinalConstruct(){
CComObject<CEmployee>* pLeader;
HRESULT hr=CComObject<CEmployee>::CreateInstance(&pLeader);
if (FAILED(hr))
return hr;
m_pLeader=pLeader;
// ..same for secretary...
return S_OK
}
d) Here comes my QUESTION: How must I proceed if the Employee object was part of another ATL COM DLL, that is it would be described in another DLL that I would now like to reuse? I guess I need to
1. Have the other DLL's idl-, tlb, and h file in my project folder. Let me name it "other.h, other.idl, other.tlb"
2. Both h- and cpp-file must have an #include "other.h" statement -- please correct if I am wrong..
3. ...but how must in the Team's h- and cpp-files the statements be (assuming the class in the "other" Dll is Member (instead of Employee? I know the following code will NOT work, so I am asking how it should be correctly?
Code:
private:
CComPtr<IMember> m_pLeader;
4. and in cpp file for:
Code:
CComObject<CMember>* pLeader;
HRESULT hr=CComObject<CMember>::CreateInstance(&pLeader);
[/code]
The program that I have written below is working. It calculates a number of payroll type variables and most recently the net pay average (All this is working 100%).
My problem is that I need to add first and last employee names to the program but every time I do this I end up ruining the working program. I've successfully added first and last names to similar programs in the past(ones that make use of an array and while loop) but never to a program that uses functions (I always have problems doing this).
My question is what codes do I use to add a first and last name variable and where do I put those codes within my program so it runs/displays correctly.
I think the coding must be similar to what I've used in the past charr and of course firstname[i] and lastname[i] lines.
Current Input File:
16454025.00
89324020.00
71044012.50
28164026.00
53874021.00
67804013.50
56414011.25
90006025.00
90015020.00
90025523.00
Ideal input file (would include names) Example.
1645 Bob Smith 40 25.00
Syntax:
#include <iostream>
#include <iomanip>
#include<fstream>
using namespace std;
//function prototypes
int readalldata(long int[], int[], float[], const int);
void findovertimehours(int[], int[], int);
[Code] .....
So I'm trying to make an employee list that holds the information so I can then delete or add from that array. I'm getting some errors regarding overloading function.
#include "employeelist.h"
const Employee & employeelist::operator [](int index) const {
return ( (this->Employees)[index] );
} Employee & employeelist::operator [](int index) {
return ( (this->Employees)[index] );
[Code] .....
How to search for a word in a text file and replace it with a new one. Such as employee address, or first name, etc.
Here's my code:
#include <iostream>
#include <string>
#include <fstream>
using namespace std;
int main(){
ifstream inFile; //declare ifstream as inFile and ofstream as outFile
[Code] ....
It is under choice 3, most of my program runs correctly but I am just stuck at this part.
I have tried different programs and nothing works for this.Write a program that will read the gross salary of an employee and calculate the net
View 1 Replies View RelatedWrite a payroll program that prompts for the number of hours an employee worked, as well as the employee’s pay rate. If the employee worked for 40 hours or less, the gross pay is calculated by multiplying the number of hours worked by the pay rate. If the number of hours worked by the employee exceeds 40 hours, the employee should receive regular pay for the first 40 hours, and receive time-and-a-half pay for the hours in excess of 40. Display the calculated gross pay on the screen.
Continue to prompt for similar data for more employees and have the gross pay of each employee displayed, until there is no more employee data to process. Then display “Good Bye”.
Your solution must be separated into three source files (Interface, Implementation, and Test)
I am writing a employee payroll program using structures. My program is running but its only showing some of the data.
HERES MY CODE
Code:
#include <iostream>
#include <cstdio>
#include <fstream>
#include <string>
#include <iomanip>
#include <cstring>
using namespace std;
const int SZ = 20; // size of arrays to hold scores
struct payrollStruct {
[Code] ....
And it doesn't show anything from txt file
Code:
40.0 10.00 A1234 Jane Adams
50.0 10.00 L8765 Mary Lincoln
25.5 10.85 W7654 Martha Washington
52.0 15.75 A9876 John Adams
45.0 25.00 W1235 George Washington
[Code] .....
Can not even say this is the error as it is giving me 45 errors. l am writing code which accept employee type based on calculating the miles traveled in a year,my code is based on type of employee, number of vacation days used and no of sick days used.
#include <iostream>
#include <iomanip>
#include <conio.h>
class employee {
int emp_type;
float emp_vacation;
[Code] ....
I have a project that I am working on and I have gotten stuck. I am getting a couple errors and would like to see how I can complete the program. Not very long of a program at that. My instructions are:
Write a program to calculate averages. Create a method named ReadData that will load a two dimensional array, named scoresArray, with the following data from a file:
132475.889.392.3
435686.383.498.3
479090.177.376.9
839373.976.389.3
556397.378.478.9
832987.365.377.2
271767.989.379.3
ReadData will have one argument, the scoresArray.
Create a method named DisplayAverages that will display the emplyee number (number starting 1324, 4356 etc) and the average of the three test grades. DisplayAverages will have one argument, the scoresArray. Your output should closely resemble the following.
Student #Test1Test2Test3Average
132475.889.392.385.8
etc, etc
Round averages to one decimal place. Passing arguments is important for this program. No global variables are allowed, except for the streamReader and the streamWriter. The scoresArray must be declared in Main and passed as an argument to the methods ReadData and DisplayAverages.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using LibUtil;
using System.IO;
using System.Text.RegularExpressions;
[Code] ....
When I run the following just to see where I am getting I get the following error:
UsersJoeDocumentsVisual Studio 2013ProjectsCIS110Program12Program12Prog
ram12Dat.txt was opened
Unhandled Exception: System.IndexOutOfRangeException: Index was outside the boun
ds of the array.
at Program12.Program.ReadData(Double[,] scoresArray) in c:UsersJoeDocument
sVisual Studio 2013ProjectsCIS110Program12Program12Program.cs:line 66
at Program12.Program.Main() in c:UsersJoeDocumentsVisual Studio 2013Proj
ectsCIS110Program12Program12Program.cs:line 24
Press any key to continue . . .
What am I missing here? I believe I have passed the arguments properly, but I am unable to declair the array within the bounds of the array?
i tring to write a employee payroll code with functions and read data from the txt. file and also bubble sort that sorts and displays starting from employees last name and calculations.
//txt file//
Hours Pay rate empID first name last name
40.0 10.00 A1234 Jane Adams
50.0 10.00 L8765 Mary Lincoln
25.5 10.85 W7654 Martha Washington
52.0 15.75 A9876 John Adams
45.0 25.00 W1235 George Washington
40.25 55.00 L9087 Abraham Lincoln
30.0 9.75 T9876 William Tell
42.5 12.50 M7654 Missy Muffett
30.0 10.00 P8765 Peter Piper
and here is my code
Code:
#include <iostream>
#include <cstdio>
#include <fstream>
#include <string>
#include <iomanip>
using namespace std;
const int SZ = 55;
void tellUser();
[Code] .....
here are the errors the are giving
Code:
payroll.cpp: In function "int bubbleSort()":
payroll.cpp:52:8: error: "lastpos" was not declared in this scope
payroll.cpp:52:18: error: "numemp" was not declared in this scope
payroll.cpp:56:10: error: "swapmade" was not declared in this scope
payroll.cpp:57:16: error: "i" was not declared in this scope
[Code] ....
Write a program in C++ that calculates the amount to be paid to an employee based on the hours worked and rate per hour. A user will enter hours worked and rate per hour for an employee. Your program should have a function payCheck that calculates and returns the amount to be paid. The formula for calculating the salary amount is as follows: for the first 40 hours, the rate is the given rate (the rate that a user has entered); for hours over 40, the rate is 1.5 times the given rate.
I had write my own coding, but it keeps error. it is okay. But i still don't think i could share here? Still running... I will update my coding for you alls to check for any syntax or logic error. The problem is i need to calculate if the employee work for more than 40 hours which 1.5 times.
Code:
#include <stdlib.h>
#include <stddef.h>
#include <string.h>
#include <stdio.h>
#include <iostream.h>
using namespace std;
int main(void) {
char *empname, *test, *final_output;
[Code] .....
My goal is to create a loop that keeps taking user input over and over until the user doesn't enter anything into 'cin >>', leaves the line blank, and simply presses the ENTER key to move on, at which point the program is supposed to break out of the loop and continue on with the rest of program execution. Something like this:
Code:
do {
cout << "
Enter a name: ";
cin >> input1;
if (input1.empty())
[Code] ....
As you can see, I've already tried using the empty() function, but that didn't work, the program simply stays in the loop and doesn't break out, no matter how many times I press enter. It just keeps prompting me to enter a name. I've also tried using something like
Code: if (input1 == "")
but that doesnt work either. How do I break out of this loop?
So I've run into the following problem. My goal is to create a loop that keeps taking user input over and over until the user doesn't enter anything into 'cin >>', leaves the line blank, and simply presses the ENTER key to move on, at which point the program is supposed to break out of the loop and continue on with the rest of program execution. Something like this:
do {
cout << "
Enter a name: ";
cin >> input1;
if (input1.empty()) {
[Code] .....
As you can see, I've already tried using the empty() function, but that didn't work, the program simply stays in the loop and doesn't break out, no matter how many times I press enter. It just keeps prompting me to enter a name. I've also tried using something like
if (input1 == "")
but that doesn't work either. How do I break out of this loop?
I am writing a program for a class where the user enters their age, how much money they have, and their full name. I know that I have to use the getline method to get the user's full name, and I know that I have to use cin.ignore() before that code, but i'm not sure why I have to use cin.ignore()?
View 1 Replies View RelatedThis is the problem :- Write a program that keeps reading integers until user enters -1, then it prints the maximum and the minimum among all numbers (-1 should be ignored).
View 14 Replies View RelatedI have my Reverse Polish calculator compiling and everything but for the assignment I need to handle a few exceptions that I can't seem to get. First off I'm trying to make the program exit if the user enters only "0" but since the input i'm using is string, I cant figure out how to code
"If the first node is 0 and the next node = NULL, return true"
Here is my code:
#include<iomanip>
#include<iostream>
#include<stdlib.h>
#include<stdio.h>
#include<string>
#include<sstream>
using namespace std;
class Stack {
[Code] .....
If a user enters a string of boolean algebra it will ouput the table.
I have input parsing, cycling through the combinations, and outputing working. However once i parse the input I am not sure what to do with it. I have thought of having it write the parsed input to a new file as a function and then use that function, but that seems bad.
How to dynamically create the function, how to implement it.
BTW This is a console function, if that changes anything.
I'm trying to create a piece of code similar to the code I have created on the new username section which will allow me to put certain restrictions on how my new users log in i.e the password length and the the need for a numeric digit. I also need storing my new members details in my previously created array.
case 'N': //Set up new user
Console.Write("
Create new Member details
");
Console.Write("
Create new Username
must be 8 characters, all letters, 1 Capital letter");
[Code] ....
You are required to write a program for a Used Car Dealer company. In the system you need to maintain the cars’ inventory and details. Each car in the company contains the following details:
• Car Registration Number
• Car Make or Brand
• Car Model
• Car Colour (eg. Silver, Black , Red)
• Year of manufacturing (The year the car was manufacture)
• Engine Capacity (in cc)
• Transmission (manual or automatic)
• Cost of the car (SGD)
The Car Registration Number is in the format of AAA1234 or AA1234A or A1234A which is accordance to the Malaysia car registration format. The A alphabet is in accordance to the registration number for respective in Singapore. (eg. AEW9829 or W1212Y or MCD1177). Note the A and the 1234 total count in the registration number can be less than 3 like AT9829 or BHY280. The Car Make is for the identifying the manufacturer of the car like Honda, Toyota, Proton..etc. The Car Model is to represent the Manufacturers’ respective model like Honda City, Honda Civic, Honda Accord, Toyota Vios, Toyota Camry … etc.
You are required to create menu and operations for:
1) Create a new Car account
2) Edit existing Car account details
3) Remove a car account from the system
4) Search for cars in the system (based on Car Make, Model, Year of manufacturing or Price)
5) Check total inventory in the system