C++ :: Payroll Program - Number Of Hours An Employee Worked / Pay Rate
Oct 5, 2014
Write a payroll program that prompts for the number of hours an employee worked, as well as the employee’s pay rate. If the employee worked for 40 hours or less, the gross pay is calculated by multiplying the number of hours worked by the pay rate. If the number of hours worked by the employee exceeds 40 hours, the employee should receive regular pay for the first 40 hours, and receive time-and-a-half pay for the hours in excess of 40. Display the calculated gross pay on the screen.
Continue to prompt for similar data for more employees and have the gross pay of each employee displayed, until there is no more employee data to process. Then display “Good Bye”.
Your solution must be separated into three source files (Interface, Implementation, and Test)
Write a program in C++ that calculates the amount to be paid to an employee based on the hours worked and rate per hour. A user will enter hours worked and rate per hour for an employee. Your program should have a function payCheck that calculates and returns the amount to be paid. The formula for calculating the salary amount is as follows: for the first 40 hours, the rate is the given rate (the rate that a user has entered); for hours over 40, the rate is 1.5 times the given rate.
I had write my own coding, but it keeps error. it is okay. But i still don't think i could share here? Still running... I will update my coding for you alls to check for any syntax or logic error. The problem is i need to calculate if the employee work for more than 40 hours which 1.5 times.
ok so i did a program that will take the number of hours worked in a week annd the number of dependents ans inputs and then outputs the workers gross pay, each withholding amount, and the net take home pay per week.
The Program should come out as this:
Regular Hours :34 Overtime hours: 0 gross pay : $323.00 social tax: 19.38 federal tax: $45.22 Statte tax: $16.15 Number of dependents covered: 2 additional health insurance expence: $0
Net take home pay: $236.25
The employer pay rate is 9.50 the employer worked 34 hours "regular hours 40 or less" if any hours are paid at over time rate of one and one half time that from the gross pay, 6% of social is with held, 14% form federal income, 5% from state income, 6$ per week from union dues, and if worker has 3 or more covered dependent, then an additional 10$ is wothheld to cover the extra cost of health insurance
heres my program:
#include <iostream> using namespace std; int main () { int regHours; // Regular Hours float hourlyPay, gross, otime, socialtax, federaltax, statetax, uniondues, dep, health; // gross income, overtime, social tax, federal tax, state tax, union dues, depen covered, health insurance
[Code] .....
the program runs but theres still errors in it, it did not make some of the calculations right.
What formula do I use to calculate overtime hours if there was over time? What formula do I use to take out union dues from total income? How to I set the number of independents covered to match the health cost if it was 3 or more?
Create a class to store a value that represents number of hours worked and number of days worked. Must ensure that the two representations are always consistent. I have to create 2 files, I'm pretty sure: a .cpp and a .h
This is what I have so far for my .h file (I know it's NOT functional...yet):
#include <iostream> using namespace std; class NumDays { private: double hours; double days;
[Code] ...
I don't know how to start / create this .cpp file to define the variables.
I am writing a employee payroll program using structures. My program is running but its only showing some of the data.
HERES MY CODE
Code: #include <iostream> #include <cstdio> #include <fstream> #include <string> #include <iomanip> #include <cstring> using namespace std; const int SZ = 20; // size of arrays to hold scores struct payrollStruct {
[Code] ....
And it doesn't show anything from txt file
Code: 40.0 10.00 A1234 Jane Adams 50.0 10.00 L8765 Mary Lincoln 25.5 10.85 W7654 Martha Washington 52.0 15.75 A9876 John Adams 45.0 25.00 W1235 George Washington
i tring to write a employee payroll code with functions and read data from the txt. file and also bubble sort that sorts and displays starting from employees last name and calculations.
//txt file// Hours Pay rate empID first name last name 40.0 10.00 A1234 Jane Adams 50.0 10.00 L8765 Mary Lincoln 25.5 10.85 W7654 Martha Washington 52.0 15.75 A9876 John Adams 45.0 25.00 W1235 George Washington 40.25 55.00 L9087 Abraham Lincoln 30.0 9.75 T9876 William Tell 42.5 12.50 M7654 Missy Muffett 30.0 10.00 P8765 Peter Piper
Code: payroll.cpp: In function "int bubbleSort()": payroll.cpp:52:8: error: "lastpos" was not declared in this scope payroll.cpp:52:18: error: "numemp" was not declared in this scope payroll.cpp:56:10: error: "swapmade" was not declared in this scope payroll.cpp:57:16: error: "i" was not declared in this scope
Can not even say this is the error as it is giving me 45 errors. l am writing code which accept employee type based on calculating the miles traveled in a year,my code is based on type of employee, number of vacation days used and no of sick days used.
#include <iostream> #include <iomanip> #include <conio.h> class employee { int emp_type; float emp_vacation;
I have a project that I am working on and I have gotten stuck. I am getting a couple errors and would like to see how I can complete the program. Not very long of a program at that. My instructions are:
Write a program to calculate averages. Create a method named ReadData that will load a two dimensional array, named scoresArray, with the following data from a file:
Create a method named DisplayAverages that will display the emplyee number (number starting 1324, 4356 etc) and the average of the three test grades. DisplayAverages will have one argument, the scoresArray. Your output should closely resemble the following.
Round averages to one decimal place. Passing arguments is important for this program. No global variables are allowed, except for the streamReader and the streamWriter. The scoresArray must be declared in Main and passed as an argument to the methods ReadData and DisplayAverages.
using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading.Tasks; using LibUtil; using System.IO; using System.Text.RegularExpressions;
[Code] ....
When I run the following just to see where I am getting I get the following error:
UsersJoeDocumentsVisual Studio 2013ProjectsCIS110Program12Program12Prog ram12Dat.txt was opened Unhandled Exception: System.IndexOutOfRangeException: Index was outside the boun ds of the array. at Program12.Program.ReadData(Double[,] scoresArray) in c:UsersJoeDocument sVisual Studio 2013ProjectsCIS110Program12Program12Program.cs:line 66 at Program12.Program.Main() in c:UsersJoeDocumentsVisual Studio 2013Proj ectsCIS110Program12Program12Program.cs:line 24 Press any key to continue . . .
What am I missing here? I believe I have passed the arguments properly, but I am unable to declair the array within the bounds of the array?
My objective is to write a payroll program that among other things sorts the net pay by using pointers. I've already written most the program and have written a working program that sorts the net pay just not by pointers. So What I'll be posting below is my program so far without the pointer sort function.
What I need to do to finish my program is figure out how to add pointers to sort net pay into it.
#include <iostream> #include <fstream>//file input output stream #include <iomanip> #include <string> using namespace std; //function prototypes int readalldata(long int id[], string fname[], string lname[], int hoursworked[], float hourlyrate[], int n);
input values : a. Name of Employee b. Position in the company c. No. of hours worked d. No. of overtime hours e. rate per hour
formula: basic pay = number of hours worked x rate per hour ot pay = overtime hours x 150% of rate per hour gross pay = basic pay + ot pay tot deduc = tax + sss + med
tax can be computed based on the following table: basic pay tax 10000 or less 1% of basic pay 10001-15000 2% of basic pay 15001-20000 3% of basic pay 20001-30000 4% of basic pay 30001 or more 5% of basic pay
sss = 10% of basic pay med = 6% of basic pay
net pay= gross pay - total ded
*The payroll should have at least 5 employees in it.*
I'm working on a payroll program and I'm having problems that are causing calculation errors.
My input file is 1234FredJones4025.00 2345 TerrySmith6010.00
The errors I get are from the regular pay, over time pay, gross pay, tax amount and net pay calculations. They all look similar to this (6e+002). I believe they are occurring because regular pay isn't calculating correctly and the rest depend on that for their calculations. However, I can't see why regular pay isn't calculating correctly.
#include <fstream> #include <iostream> #include <iomanip> using namespace std; class payroll{ ifstream fin; char employeeid[100];
I am having some trouble with my class assignment. We need to write a C program that will calculate the employee salary. There are 5 employees that will need to be calculated. We are required to use a loop also.
So far this is what I have but I am receiving errors when running the program.
#include <stdio.h> int main() { int clock_num; /* employee clock number */ float gross; /* gross pay for week (wage * hours) */ float hours; /* number of hours worked per week */ float wage; /* hourly wage */ /* Prompt for input values from the screen */ printf ("This is a program to calculate gross pay.
The program that I have written below is working. It calculates a number of payroll type variables and most recently the net pay average (All this is working 100%).
My problem is that I need to add first and last employee names to the program but every time I do this I end up ruining the working program. I've successfully added first and last names to similar programs in the past(ones that make use of an array and while loop) but never to a program that uses functions (I always have problems doing this).
My question is what codes do I use to add a first and last name variable and where do I put those codes within my program so it runs/displays correctly.
I think the coding must be similar to what I've used in the past charr and of course firstname[i] and lastname[i] lines.
Current Input File: 16454025.00 89324020.00 71044012.50 28164026.00 53874021.00 67804013.50 56414011.25
90006025.00 90015020.00 90025523.00
Ideal input file (would include names) Example. 1645 Bob Smith 40 25.00
The program is showing zero in output section ....
Code: #include <iostream> #include <cstdio> #include <fstream> #include <string> #include <iomanip> using namespace std; const int SZ = 55;
[Code] ....
The output:
Code: First Last Employee Hours Rate Regular Overtime Gross Name Name Number Worked of Pay Pay Pay Pay ============================================================== Jane Adams A1234 40.00 10.00 0.00 0.00 0.00 Mary Lincoln L8765 50.00 10.00 0.00 0.00 0.00 Martha Washington W7654 25.50 10.85 0.00 0.00 0.00 John Adams A9876 52.00 15.75 0.00 0.00 0.00 George Washington W1235 45.00 25.00 0.00 0.00 0.00 Abraham Lincoln L9087 40.25 55.00 0.00 0.00 0.00 William Tell T9876 30.00 9.75 0.00 0.00 0.00
This program in not completed. I am creating a large program in order to calculate a company's weekly payroll. For now I am filling in the separate functions piece by piece before the rest of the program is completed.
Right now I am trying to use separate functions to call other functions. I need to ask the user for the file name and then open the file. I am no longer getting any compiler errors however when I run the program all it displays is "Welcome."
So it's not actually calling the NameTheFile function and the OpenTheFile function. It just says "Welcome" and then closes down. Why is it doing this?
I am making this program for a class and it works fine except for the daily interest rate for the checking account is off. The daily interest for the savings computes perfectly. The monthly interest rate for savings is 6% and for checking 3%.
Account.h
#ifndef ACCOUNT_H #define ACCOUNT_H #include <iostream> #include <string> using namespace std; const int DAYS_PER_MONTH = 30;
I use ffmpeg codes in my C++ app and would like to control the bit_rate parameter for VIDEO there. I tried to change its value in work (via ost->st->codec->bit_rate = 150000), but ffmpeg did not wish to change it.
The server(and not the clients) will connect to the clients and just send a message. The idea is to be able to connect at each client a different time.
e.g every 10mins connect at client 1 every 2mins connect at client 2 every 1hour connect at client 3 and so on...
So how to implement this ? Should i create a new child process for each connection and what about the timing ? A pseudo code also will work.
The question involves me writing a program using a overloaded function to calculate the Weekly rate of employees but they get paid hourly and weekly. I get this error but do not know why,
#include <iostream> using namespace std; int calcWeeklyPay(int paidWeekly, int annualSalaryWeekly) //Returns the Weekly salary of weekly paid Employees int calcWeeklyPay(int paidHourly, int annualSalaryHourly) //Returns the Weekly salary of Hourly paid Employees
I have a problem requiring me to : enter loan amount: Enter interest rate: Enter length of loan (years)
It wants me to input the minimum amount for the loan, and the minimum interest rate. and then output a table that has 5 loan amounts across the top in $10000 increments and 4 interest rates along the side in .25% increments.
#include <iostream> #include <iomanip> #include <cmath> using namespace std; int main () { double loan, interest, length, payment,ti; //Enter loan price
I am currently working on a lab for my intro to programming class and the lab is asking for a long distance call calculator. Based on the times that you start your rate will change. If the call starts from 00:00 to 07:59, Rate = $0.07. If the call starts from 08:00 to 18.59, Rate = $0.12. Lastly if the call starts from 19:00 to 23:59, your rate is $0.28.
Then on the output you must show the start time, end time, rate, and total cost of the call.
My confusion is on the end part of the code (the output).
I know you have to use the % operator to convert minutes to hours, but I don't completely understand it which is why I am here. How does the modulus do that? And how will it go over to the next hour if the call starts at 1:35 and ends after 30 minutes (2:05)?
Here is what I have so far.
#include <iostream> #include <string> using namespace std; int main() { float callStart, minutes; double cost; char choice('Y'); string rate;
I'm currently working on a program that calculates shipping charges. However I'm stuck, whenever I compile the program the total amount at the end always comes up as my flat rate variable and not the total calculated number.
