I have the following code which attempts to assign a u_int8 array of 256 to an unsigned char[256]:
Code:
unsigned char testData[256]=pSample->data;
I get the compilation error:
error C2440: 'initializing' : cannot convert from 'const uint8_t [256]' to 'unsigned char [256]'
What is the safe way to cast or convert here?
I am having some trouble performing this. I am not sure, if my unsigned char arrays are null terminated, but I don't think so. Here is my code: They are supposed to be byte arrays of size 16.
int setkey(unsigned char* ky) {
printf("INSIDE POLY-DEL ... key byte array passed in HEX:
");
int i;
for (i = 0; i < (int)16; i++)
[Code] .....
i wish to generate all possible key combinations ranging:
HEX: "0F FF FF FF FF FF FF FF" TO HEX: FF FF FF FF FF FF FF FF
i also test each key after incrementing by 1, for test i want the key to be a an unsigned char[8]
key start rang and end range can be initialize/declare in any format.
Problem is if :
unsigned char key[] = {0x0F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
then i can not increment this key by +1 , though if i initialize this key in decimal as:
unsigned long long key = 1152921504606846975;
then i can increment the key in for loop by key++ but then i cant convert it back into unsigned char array
i want to achieve something like this :
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
unsigned char key[] = {0x0F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
int main()
{
[code]...
In my programer i also have function that test each key but key has to be unsigned char...
How do I convert a variable of type unsigned char to string.
View 9 Replies View RelatedI have an embedded microcontroller system communicating with a similar system by radio. The api for the radio requires data to be transmitted as an unsigned char array. It will always transmit a positive integer in the range 0 to 255.When I receive the data I am having difficult in extracting this positive integer.
Code:
unsigned char rxData[4]={'1','2','3',''};
int inVal=0;
//want to assign inVal whatever number was transmitted
E.g. 123
I've been at this for a week and have tried at least 10 different approaches including the use of the atoi(), copying the absolute value of each element of rxData into another char array, reinterpret_cast, and others.
I need fastest method to reverse order of bytes in my char array.
For example i have:
unsigned char buf[8];
// consider data stored in buf is 88 77 66 55 44 33 22 11
// how to reverse it to: 11 22 33 44 55 66 77 88
// currently i can do it by equal assignment , i make another buf like:
unsigned char buf_ok[8];
[Code] ....
// This does reverse the bytes as i want but its very slow , i am looking for fast method ..
I'm having a pretty weird problem. I've created an unsigned char array for an image buffer:
buffer_rgb = new unsigned char[_w * _h * 3];
memset(buffer_rgb, 0x0, sizeof(unsigned char)* _w * _h * 3);
And I add pixel color values to it like so:
buffer_rgb[i] = ((unsigned char)(col[0] * 255));
buffer_rgb[i + 1] = ((unsigned char)(col[1] * 255));
buffer_rgb[i + 2] = ((unsigned char)(col[2] * 255));
Where col is a 'vec4' struct with a double[4] with values between 0 and 1 (this is checked and clamped elsewhere, and the output is safely within bounds). This is basically used to store rgb and intensity values.
Now, when I add a constant integer as a pixel value, i.e.:
buffer_rgb[i] = ((unsigned char)255;
Everything works as it should. However, when I use the above code, where col is different for every sample sent to the buffer, the resulting image becomes skewed in a weird way, as if the buffer writing is becoming offset as it goes.
These two images illustrate the problem:
tomsvilans.com/temp/140803_render_skew.png
tomsvilans.com/temp/140803_render_noskew.png
You can see in the 'noskew' image all pixels are the same value, from just using an unchanging int to set them. It seems to work with any value between 0-255 but fails only when this value is pulled from my changing col array.
Whole function is here:
// adds sample to pixel. coordinates must be between (-1,1)
void Frame::addSample(vec4 col, double contrib, double x, double y) {
if (x < -1 || x >= 1 || y < -_aaspect || y >= _aaspect) {
[Code] .....
I have a bitmap header information in the struct
typedef struct tagBITMAPINFO {
BITMAPINFOHEADER bmiHeader;
RGBQUAD bmiColors[1];
} BITMAPINFO
The total size of this is 1080.
Now i want to convert this into a unsigned char pointer.
unsigned char * pBMPHeaderData;
I already got the raw image data in another unsigned char buffer.
unsigned char* pRawBMPData;
Now i want to make a complete BMP image by adding the header info and raw data into a new unsigned char pointer. For this i need to convert the BITMAPINFO struct into a unsigned char *
So the new buffer will be,
unsigned char * pCompleteBMPIMageData = pBMPHeaderData + pRawBMPData;
how to do this?
I am writing code to multiply two int arrays and in my one function i am trying to convert the char array into an int array. I have tested many parts however i can not find the problem.
Code:
struct integer* convert_integer(char* stringInt){
struct integer *converted = malloc(sizeof(struct integer));
int length, i, *ints;
ints = (int *)malloc(10001 * sizeof(int));
length = strlen(stringInt);
printf("stringInt: %s with length of %d
", stringInt, length);
converted->size = length;
[Code]...
I want to convert int to char array for get the total of digits like this..
Code:
int total;
char charnum[2] = (char)total; //this is the problem
int num = 0;
for (int i = 0; i <2; i++)
{ num += charNum[i] -48;}
cout << num;
If total was 42 i want to get output as 6. for this purpose i want to convert int to char.
I am trying to assign the integer value to unsigned char array. But it is not storing the integer values. It prints the ascii values. Here the code snippet
Code: uchar uc[100];
for(i=0;i<100;i++)
{
uc[i] = i;
}
The values which are stored in uc[] is ascii values.I need the integer values to be stored in uc[]. I tried to do it with sprintf. but the output is not as expected. if I print the uc[i] it should diplay the value as 0,1,2....99.
Currently I have:
Code:
char my_array[4] = { '1', '2', '3', '4' };
how do I convert the above to a string of: "1234"
.I have this string that I need to convert into a 2d char array like this:
String str= "A,E,B,I,M,Y#N,R,C,A,T,S";
I know how to use delimiter and split string and I know how to convert but only from string to char[].I need something like this:
Input: String str= "A,E,B,I,M,Y#N,R,C,A,T,S";
Output: [A] [E] [B] [I] [M] [Y][N] [R] [C] [A] [T] [S]
Without lossing information?
View 14 Replies View RelatedHow to convert char array into double?,i.e. store char array values into a single double variable. Below is the code that i'm working. Im extracting the value "2255.1682" from char array gpsdata1. I used while loop, extracted the value and stored in "myChar", but i want to store it in double variable "lat1".
Code:
#include <stdio.h>
#include <stdlib.h>
int main(){
unsigned char gpsdata1[]="$GPGGA,091310.000,2255.1682,N,11356.3605,E,1,4,1.62,164";
char myChar;
double lat1;
[Code] .....
i want to convert in loop for example this
char number[]="54465465445646848640";
and in loop convert these element to int one by one.
How do I convert a string of unknown length to a char array? I am reading strings from a file and checking if the string is a Palindrome or not. I think my palindrome function is correct, but do I do something like char [] array = string.length(); ??
#include <iostream>
#include <fstream>
#include <string>
#include <cctype>
[Code].....
I'm writting program and need to convert int ot char array without simbol. I have tryed snprintf , but his returns array full of simbols if it is initilized elsware return full of garbidge. Is there any elegent way to aceave this? What I'm trying to aceave is liek this:
char buffer[10];
int temp = 1231423;
// Do conversation...
// After conversation char array should look like this
// 1 2 3 1 4 2 3 _ _ _
// without simbol
How do I convert just the number from position 4 to 15 from this char array and convert to int and save to variable
char numbers[]="54155444546546545643246543241465432165456";
the real char got 1000 digits this is just example how do i convert chars from numbers[4] to numbers[15] and save them as one number ? in this case i will get int x = 5444546546545643 as u can see char numbers as a example above
unsigned char key[32];
139 unsigned char rfseed[32];
173 f = fopen("/dev/urandom","rb");
174 fread(key,1,32,f);
175 fread(rfseed,1,32,f);
I am having problems copying outputs of the above code into other unsigned char other[32]. I need to keep the output of dev/urandom for backup. But, when I try to assign the values by memcpy(other, key, 32), the values do not match. The same problem happens by assigning values index by index in a loop.
how to convert an element of int type of an array to char type?
View 2 Replies View Relatedhow is the best way to free unsigned pointer array allocated with cmallc?
Code:
uint8_t *buf;
buf = cs_calloc(ca->len + 13);
i do like this , but i know this is not quite right , since i got compile warning passing argument 1 of ‘free’ makes pointer from integer without a cast
Code:
for (i = 0; i < ca->len + 13; i++)
{
free(buf[i]);
buf[i] = NULL;
}
free(buf); do i need to free each element of array like above?
I need to convert a string IP to an unsigned int (uint32), but however solutions I've found elsewhere have not worked (such as `atoi`).
When using `(uint32)"54.171.82.217 ";` : [URL] ....
When using `atoi("54.171.82.217");`: [URL] .....
How can I correctly convert the string version of the IP to the uint32 type?
when you convert 1.7 to unsigned int, it becomes 1 or 2?
View 9 Replies View RelatedI'm having trouble converting this binary search with an int array to use a string array..
Code:
#include <iostream>
#include <string>
using namespace std;
// Function prototype
int binarySearch(string [], int);
[Code] .....
I am trying to write down in binary format an array of unsigned int values but i get the following compilation error :
: In function ‘int CIndex(std::fstream&, std::fstream&, std::fstream&, std::fstream&)’:
./src/IndexBuilder/index.cpp:23:26: error: no matching function for call to ‘std::basic_fstream<char>::write(int*, long unsigned int)’
./src/IndexBuilder/index.cpp:23:26: note: candidate is:
/usr/include/c++/4.6/bits/ostream.tcc:184:5: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::write(const _CharT*, std::streamsize) [with _CharT = char, _Traits = std::char_traits<char>, std::streamsize = long int]
This is the part the is not working:
Code:
// uia is : unsigned int * uia;
// then I have allocated the space for it
// load it with unsigned int's
// k is the number of variables in my array
o.write(uia,sizeof(unsigned int)*k); But thsi should be so simple and strait forward.... in c i do it as :
Code:
fwrite(uia, sizeof(unsigned int), k , fp); but since i would need to convert fstream to FILE* i decided to do it c++ way.
and this is how i opened the file :
Code:
o.open (fileName.c_str(),std::ios::out|std::ios::binary);
