I am having some trouble performing this. I am not sure, if my unsigned char arrays are null terminated, but I don't think so. Here is my code: They are supposed to be byte arrays of size 16.
int setkey(unsigned char* ky) {
printf("INSIDE POLY-DEL ... key byte array passed in HEX:
");
int i;
for (i = 0; i < (int)16; i++)
I have an embedded microcontroller system communicating with a similar system by radio. The api for the radio requires data to be transmitted as an unsigned char array. It will always transmit a positive integer in the range 0 to 255.When I receive the data I am having difficult in extracting this positive integer.
Code: unsigned char rxData[4]={'1','2','3',''}; int inVal=0;
//want to assign inVal whatever number was transmitted
E.g. 123
I've been at this for a week and have tried at least 10 different approaches including the use of the atoi(), copying the absolute value of each element of rxData into another char array, reinterpret_cast, and others.
I need fastest method to reverse order of bytes in my char array.
For example i have:
unsigned char buf[8]; // consider data stored in buf is 88 77 66 55 44 33 22 11 // how to reverse it to: 11 22 33 44 55 66 77 88 // currently i can do it by equal assignment , i make another buf like: unsigned char buf_ok[8];
[Code] ....
// This does reverse the bytes as i want but its very slow , i am looking for fast method ..
Where col is a 'vec4' struct with a double[4] with values between 0 and 1 (this is checked and clamped elsewhere, and the output is safely within bounds). This is basically used to store rgb and intensity values.
Now, when I add a constant integer as a pixel value, i.e.:
buffer_rgb[i] = ((unsigned char)255;
Everything works as it should. However, when I use the above code, where col is different for every sample sent to the buffer, the resulting image becomes skewed in a weird way, as if the buffer writing is becoming offset as it goes.
You can see in the 'noskew' image all pixels are the same value, from just using an unchanging int to set them. It seems to work with any value between 0-255 but fails only when this value is pulled from my changing col array.
Whole function is here:
// adds sample to pixel. coordinates must be between (-1,1) void Frame::addSample(vec4 col, double contrib, double x, double y) { if (x < -1 || x >= 1 || y < -_aaspect || y >= _aaspect) {
I am having problems copying outputs of the above code into other unsigned char other[32]. I need to keep the output of dev/urandom for backup. But, when I try to assign the values by memcpy(other, key, 32), the values do not match. The same problem happens by assigning values index by index in a loop.
I have this function in a class: and a private declaration: how can I copy the parameter "ProductName" to allowedProductName. I tried all combination and I can't get it to compile.
I am trying to assign the integer value to unsigned char array. But it is not storing the integer values. It prints the ascii values. Here the code snippet
The values which are stored in uc[] is ascii values.I need the integer values to be stored in uc[]. I tried to do it with sprintf. but the output is not as expected. if I print the uc[i] it should diplay the value as 0,1,2....99.
How do you use char instead of unsigned to calculate numbers? This is using char only and nothing else.
Step 1: I ask the user to enter a number. Step 2: User enters a number. Step 3: Number user entered is going to be that number squared or cubed or w/e.
For example; "Enter a number: " 3 " Number you entered multiplied four times: " 81 (Since (3)*(3)*(3)*(3) = 81)
Another example; "Enter a number: " 5 " Number you entered multiplied four times: " 625 (Since (5)*(5)*(5)*(5) = 625)
Code: Char num; cout << "Enter a number"; cin >> num; cout << "Number you entered multiplied four times: " << (num)*(num)*(num)*(num) << endl;
I came across some code and it's not clear why it is casting an unsigned char * to another pointer type only to free it right after. Here are the relevant structures:
As you can see, _Edge_Message has a *msg field, but in the function below, they cast it to the other two structure types inside the case blocks of the switch statement only to free it. What is the point or advantage of doing this?
Code: void _edje_message_free(Edje_Message *em) { if (em->msg) { int i; switch (em->type) {
The characters show up in the list box as short unreadable characters. like it is chopped.
If i change to : Sendmessage(hndl, listboxupdate,0 , (LPARAM)&buf[15]);
Then I can see readable valid strings of up to 50 characters and then empty unreadable characters afterwards. I tried all kinds of things , including using CString, still did not work.
Now i want to convert this into a unsigned char pointer.
unsigned char * pBMPHeaderData;
I already got the raw image data in another unsigned char buffer.
unsigned char* pRawBMPData;
Now i want to make a complete BMP image by adding the header info and raw data into a new unsigned char pointer. For this i need to convert the BITMAPINFO struct into a unsigned char *
How can i write a function that will read an "unsigned integer" into a variable of type "unsigned short int"? i can not use cin >> inside the function.. so i am looking for atleast a hint!
how is the best way to free unsigned pointer array allocated with cmallc?
Code:
uint8_t *buf; buf = cs_calloc(ca->len + 13);
i do like this , but i know this is not quite right , since i got compile warning passing argument 1 of ‘free’ makes pointer from integer without a cast
Code:
for (i = 0; i < ca->len + 13; i++) { free(buf[i]); buf[i] = NULL; }
free(buf); do i need to free each element of array like above?
I am trying to write down in binary format an array of unsigned int values but i get the following compilation error :
: In function ‘int CIndex(std::fstream&, std::fstream&, std::fstream&, std::fstream&)’: ./src/IndexBuilder/index.cpp:23:26: error: no matching function for call to ‘std::basic_fstream<char>::write(int*, long unsigned int)’ ./src/IndexBuilder/index.cpp:23:26: note: candidate is: /usr/include/c++/4.6/bits/ostream.tcc:184:5: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::write(const _CharT*, std::streamsize) [with _CharT = char, _Traits = std::char_traits<char>, std::streamsize = long int]
This is the part the is not working:
Code: // uia is : unsigned int * uia; // then I have allocated the space for it // load it with unsigned int's // k is the number of variables in my array
o.write(uia,sizeof(unsigned int)*k); But thsi should be so simple and strait forward.... in c i do it as :
Code: fwrite(uia, sizeof(unsigned int), k , fp); but since i would need to convert fstream to FILE* i decided to do it c++ way.
I've made a code to check whether or not a save file has been created correctly, but for some reason it always returns this line: readdata[qa]=='1' as true. in which qa is the counter I use in a for loop and readdata is a character array consisting of 50 characters that are either 0, 1 or 2.
this is the entire code:
#include <iostream> #include <fstream> #include <string> using namespace std;
[Code]....
at first is also went wrong at line 22 and also returned that as true, but then I added brackets and it worked.
I am trying to concatenate two words from a file together. ex: "joe" "bob" into "joe bob". I have provided my function(s) below. I am somehow obtaining the terminal readout below. I have initialized my memory (I have to use dynamic, dont suggest fixing that). I have set up my char arrays (I HAVE TO USE CHAR ARRAYS (c-style string) DONT SUGGEST STRINGS) I know this is a weird way to do this, but it is academic. I am currently stuck. My file will read in to my tempfName and templName and will concatenate correctly into my tempName, but I am unable to correctly get into my (*playerPtr).name.
/* this is my terminal readout joe bob <- nothing is put into (*playerPtr).name, why not? joe bob joe bob seg fault*/ /****************************************************************/ //This is here to show my struct/playerInit
So I wrote a program to turn a binary file's data into an unsigned character array for inclusion in an executable. It works just super.
I'm wondering how I can write a program that will perform this operation on every file in a directory and all it's sub-directories so that I can I can include everything I need all at ounce.