I want to send data from a file via winsock. The problem is that the only first line in the file is send.
Client
#include <iostream>
#include <winsock2.h>
#include <fstream>
#include <string>
#pragma comment(lib,"ws2_32.lib")
#define SERVER "127.0.0.1" //ip address of udp server
[Code] ....
Client:
Code: ....
string cmd = "dir c:filequeue > ";
string outputFilePath;
outputFilePath.append(getTempPath());
outputFilePath.append(" est.txt");
cmd.append(outputFilePath);
system(cmd.c_str()); // dir c:filequeue > %temp% est.txt
string content = get_file_contents(outputFilePath.c_str());
send(s, content.c_str(), content.length(), 0); I'm executing the "dir" command to get a listing of Folders/files of one Folder. Then I read the Output of the file and send it over winsock to the Server.
Now, the Problem is, I don't know how I can handle the recv properly, cause I have to set the buffer size without knowing, how much data is actually transfered. Sometimes maybe no files are in c:filequeue, sometimes a 100k.
So I tried to make recv as a Loop:
Server:
Code: ...
while (rc != SOCKET_ERROR) {
printf("
#");
gets(buf); //please no discussion about gets, I will Change this later ;)
if (strcmp(buf, "ls") == 0){
send(connectedSocket, "LIST", 4, 0);
[Code] .....
now it works, but as the recv blocks, it will never leave the Loop, even when the Transfer is finished.What should I do?
I believe I could make unblocking sockets, but that's a bit complicated. Isn't there an easier solution, with malloc'ing the buffer or a Signal when to leave the recv Loop?
This question is kind of a continuation of Winsock Sending X264 Nal Unit. I was finally able to solve that problem, turns out in the end I was missing a memcpy(). Now my current issue is, when I try to decode the received packets, I am shown a bunch of errors. I have attached a picture with my decoding errors. So since I am using a reliable multicast socket, which doesn't guarantee order of delivery. My initial thought is that I am getting packets out of order.
So my question is, how would I attach a packet header to my current data? Could I get away with sending the header separately? Similar to what I am doing with the nal length. If I do attach my header to the packet data, what is a good way to delimit the two?
Server:
#include <WinSock2.h>
#include <WS2tcpip.h>
#include "wsrm.h"
#include <Windows.h>
#include <stdio.h>
#include <stdint.h>
#include <iostream>
#include "x264Encoder.h"
[Code] ....
My client is just reading packets into a vector, because decoding it right away was too slow. So I thought that might have been an issue, so I decided to read in 200 packets just for testing purposes.
Attached image(s)
I am currently trying to send a x264 nal unit using WINSOCK with a reliable multicast socket. It isn't decoding properly, and my initial thought is I am not receiving all the bytes correctly. I was hoping some fresh eyes can provide insight on errors or any improvements. I have seen some topics about this subject, and they showed sending entire structs with the socket. However, I am concerned about endianess so I am trying to stay away from that approach. I have commented out the decoding part, until I am confident that I am receiving the nal unit properly.
Server:
#include <WinSock2.h>
#include <WS2tcpip.h>
#include "wsrm.h"
#include <Windows.h>
#include <stdio.h>
#include <stdint.h>
#include <iostream>
#include "x264Encoder.h"
If I have a text file named, stuff at a specified path in the c : drive, how do I send the contents of this file to another computer using the Internet?
View 5 Replies View RelatedHow to send a keystroke or a mouse event to another running process in Ubuntu? I want to write a C program that reads data from the USB port sent by AVR Micro Controller board continuously.In response to that it checks the data received and sends a command to another process running on the computer? Example,when the program reads 101 from the USB port it sends left mouse button down to the VLC media player window that is currently running?
View 1 Replies View RelatedWhen server send data then client receive that data, in C# windows services where data receive continuously (Using IP Address and port number) . This below code writing in console application . i want implement same logic in windows service side. but i want data receive continuously.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
[Code]....
Above code write in console application, same logic implementing in windows service, but i want data receiving continuously
why this code works only for file of smaller data. When I try to send for istance a image, the image arrive corrupted.
Client:
//read all file
byte[] vett = File.ReadAllBytes(s);
//read filename
[Code]....
I use SmtpClient's SendAsync method,when after send mail, i delete the file ,tip The process cannot access the file because it is being used by another process.
System.Net.Mail.MailMessage msg = new System.Net.Mail.MailMessage();
SmtpClient client = new SmtpClient();
string attachmentPath="c:\test.jpg"
if(attachmentPath != "") {
[Code] .....
I have make a code for simple chatting for single client but i want to make it for multiple client. what i need to modify in the code?
server.c
int main(int argc, char *argv[]) {
struct sockaddr_in localaddr,remoteaddr;
SOCKET s,ns;
char send_buffer[80],receive_buffer[80];
int n,bytes,addrlen;
memset(&localaddr,0,sizeof(localaddr));
[Code] .....
I'm trying to understand winsock with c++. Let's assume I have a 2 working applications, one is the client and one the server:
Client: I can enter a command, for example chat or filetransfer, it will then switch into this specific mode where I can enter commands like uploading a file, send a message etc.
Client
Code: ....
while (rc != SOCKET_ERROR) {
printf("
#");
gets(buf);
if (strcmp(buf, "CHAT") == 0){
// start chat mode
[Code] .....
I'm in a recv/send loop and I'm using streams...so basically all the data is being sent/received there. Now, if I want to upload a file, I send a FILETRANSFER String to the server. Then I will probably need another loop that receives file requests from the client. The server will need more details about the file, like the path, name, size...
Now, my question is, what's the best practise for something like that? I'm having problems understand how I can send 3 different values from the server to the client and how he will receive them in the right order store them in variables. And also, after sending something to the server, in some cases, the client will have to wait for the server to answer.
Is there a good example of a similar application?
Code:
#include <algorithm>
#include <winsock.h>
void some_func() {
int result = std::min (0, 16384);
}
Okay, but the above code consistently gives me error C2589: '(' : illegal token on right side of '::'. I'm building with VC8. If I don't #include <winsock.h> the code compiles correctly but it doesn't matter if I #include <winsock.h> before or after including <algorithm>
I guess it might be due to one of my #defines but I've tried the code in a very minimal program and I still get the error.
send(sConnect, (userinput, key), 256, 0);
sConnect is already predefined as a socket
Key is a character array of [32]
Userinput is a character array of [256]
How can you send both of them at the same time using the send function without having to create a separate connection?
I am trying to write my files to another subfolder . Below is my program.
Code:
cat th6.c
#include <pthread.h>
#include <stdio.h>
#include <string.h>
#define SIZE 8
#define NUMELM 8
[Code] ....
I observe my filename along with directory as text in the new file created in sublfolder. This is output.
[cporgs/apue/threads]: mkdir first
[cporgs/apue/threads]: ./a.out test.txt first
test.txt -- first/test.txt
dfdfdfdfdfdfdf-14
dfdfdfdfdfdfdf-14
in thread test.txt first
[cporgs/apue/threads]: cat first/test.txt
dfdfdfdfdfdfdffirst/test.txt
[cporgs/apue/threads]: cat test.txt
dfdfdfdfdfdfdf
I could not able to get from where this filename and folder is getting added.
My problem is that I've created a Client and Server program in which they communicate. The Client is an SDL Application that allows you to play as a movable character IF YOU ARE CONNECTED TO THE SERVER. If not, You're unable to play. THIS WORKS!
However, Only one client is able to play on my server?? Anyone elses' window freezes and they are not allowed to play (As if not connected to the server). Here is my server code.
Code:
#include <iostream>
#include <winsock2.h>
#include <vector>
#include <process.h>
#include "Included/pthread.h"
#define MAX_THREADS 5
bool gamerunning = true;
[Code] ....
I'm having troubles allowing more than one client to play on the server.
Ben has been administering a MBTI personality test. Now he has all the responses, but the task of scoring and compiling results seems daunting. The personality test* is a series of 70 questions for which the available responses are ‘A’ and ‘B’. Based upon the answers to the 70 questions, a personality profile is determined, categorizing the degree to which the responses place the person on four scales:
Extrovert vs. Introvert (E/I)
Sensation vs. iNtuition (S/N)
Thinking vs. Feeling (T/F)
Judging vs. Perceiving (J/P).
Each of the 70 questions relates to one of the four scales, with an ‘A’ response indicating the first of the corresponding pair (E, S, T, or J) and a ‘B’ indicating the second (I, N, F, or P). For instance, an ‘A’ response on the question: At a party do you:
A. Interact with many, including strangers
B. Interact with a few, known to you indicates an Extrovert rather than an Introvert; just the opposite for a ‘B’.
For this test, each question is designed to influence one of the four scales as follows:
questions 1, 8, 15, 22, 29 … are used to determine E/I,
questions 2, 9, 16, 23, 30 … and 3, 10, 17, 24, 31 … to determine S/N,
questions 4, 11, 18, 25, 32 … and 5, 12, 19, 26, 33 … to determine T/F, and
questions 6, 13, 20, 27, 34 … and 7, 14, 21, 28, 35 … to determine J/P.
Notice these come in sequences of “every 7th” question.
The goal of the test is to determine which end of each of the four scales a person leans, and to thus classify him/her based on those leanings (e.g., as ENFJ, INTJ, etc.). Since Ben would also like an indication of how strongly the test taker fell into each of the four, the program should print the percentage of ‘A’ responses for that scale.
Input for this program should come from a file responses.txt. The first line of the file will contain a single integer, n, indicating the number of test results to follow. Each of the following n lines will contain the first name of the test taker, a single blank, his/her last name, a single blank, then the 70 responses he/she gave on the test. Although the test instructions indicate that the results are most valid when all questions are answered, sometimes respondents leave questions blank. In that case, a dash appears at the corresponding place in the list of responses.
Output for the program should be written to the file types.txt. It should include a well-formatted report listing, for each test taker, his/her name, the percentage of ‘A’ responses in each scale, and the resulting personality type. A tie within a scale should result in a dash (‘-‘) for that part of the personality type.
I am trying to stream data to a file, and then return to the file to add further data. When I add data the second time, I then want to update the value of the second byte in the whole file. I can't seem to do this!
Here is my sample code:
Code:
int a = 1;
int b = 2;
int c = 3;
int d = 4;
int e = 5;
int f = 6;
int g = 7;
int x;
fstream out1("file.dat", ios::out | ios::binary | ios::trunc);
[code]....
The output I get is "1, 2, 3, 4, 5, 6", but I want to be getting "1, 7, 3, 4, 5, 6", because in "out2", I seekp to the second integar entry, and change it to "7".
I have also tried using ios::ate in the constructor for "out2", but this gives me the out put "4, 7, 6, 6, 6, 6", which is suggesting that when I create my fstream object "in", any seekg commands are relative to the beginning of the "out2" stream, rather than the "out1" stream.
I need to find inverse of a matrix data in binary file should be used to form matrix.its not finding inverse correctly rest is working good.
Code:
#include <stdio.h>
void createbin();
void display();
void inverse();
int main()
{
createbin();
display();
inverse();
[Code] ....
I want to input data into text file while not deleting the original data in the file and I use something as
ofstream writefile;
writefile.open("example1.txt");
if (writefile.is_open()) {
for(j=0; j<N; j++) {
[Code] ....
But this will delete the original data.
#include <iostream>
#include <fstream>
using namespace std;
int main() {
int r = 0;
int c = 0;
int num[17][15] = { 0 };
[Code] ...
// Here is my code for displaying the data from the text file into a 2d array and height next to it, but I am not able to diaplay the height from 60 to 76 next to the row of the 2d array, as shown in the table below. This is my program:
Recently the health authorities have listed a new way to calculate the body mass index (BMI) of an individual.
Values of 20 – 24 are classified as normal, 25-29 as overweight, and 30-34 as heavy.
The table below is a portion of a typical BMI table.
BMI:202122232425262728293031323334
Height:
60102108113118123128133138143149154159164169174
61106111116122127132138143148153159164169175180
.
.
.
MY task is to write a program that does the following things:
1.Produce the table by reading in the data from bmi.txt (on Moodle) into a 2-D array.
2. Display the table neatly on the screen, with row and column headings. The BMI should go from 20 to 34. The height should go from 60 to 76 inches.
3. Prompt the use for their height (in inches) and their weight.
4. Make the program print the closest BMI.
If their weight is lower than the values on the table, use 20 as the BMI.
If their weight is higher than the values on the table, use 34 as the BMI.
5.Loop the program so the user can find more BMI’s.
I'm reading from a file the middle column of data (Volts) where my test file "AP.txt" is opened by my program. Here is a segment of the data:
time Volts dV
49552 -66.20183 -0.01556807
49553 -67.76025 -0.01556495
49554 -69.30704 -0.01533247
49555 -70.81799 -0.0148486
49556 -72.26774 -0.0141133
49557 -73.63226 -0.01315276
49558 -74.89141 -0.01201764
Since the calculation I performed gives me -71.77 Volts, I need to match this value to the time that this occurs closest to using my program, and output the time that this occurs at.
Here is my program so far:
int main()
{
std::ifstream inFile;
inFile.open("AP.txt");
ofstream results_file ("maxvaluewithinput.txt");
float TimeAtdVMax = 0;
float VoltsAtdVmax = 0;
[Code]...
If you're curious, this program isn't for homework. It's part of the independent learning on C++ I'm doing for a Master's Thesis; the program will eventually model the APD90 of a ventricular action potential.
I am very very new to C++. A bit of background. I have been writing in excel vba for large number crunching, and the code is now taking quite a while to run. A friend of mine suggested i start writing in C++, so i read up on it. And downloaded Code:Blocks.
My VBA Code is:
Sub arrayss()
Dim NameArray As Variant
Dim datarray As Byte
Dim DirectionArray As Variant
Dim WinArr As Variant
[Code] .....
Ultimately i would like to recode this to C++, but my first and probably silly question is how do i get the data from Excel to use in C++. I was thinking either to put the data in 3 csv files and convert into three Arrays in C++. Or maybe create a library of the data in C++. Ultimately it is speed i am looking for, so before i start recoding i wanted to start with the best way.
The data is like this in excel: (don't know how to create a table)
ABC DCA GFE THE
15 0 1 0 1
30 1 0 1 0
45 1 1 0
00 0 0 1
15 1 1 0
15 1 0 0 1
15 0 1 1 1
30 1 0 0
45 1 1 1
So the headers would be in one array, the 15's, 30's etc would be in another array and the 1's and 0's and Empty ( i need it to record an empty cell) would be in another array...
What's the problem with the following:
Code:
#define K 3;
int max(int a, int b) {
return a>b? a : b;
} int main() {
cout<<max(K, K+3);
return 0;
}
Why is it not allowed, and how is it different from:
Code:
int max(int a, int b) {
return a>b? a : b;
} int main() {
cout<<max(3, 3+3);
return 0;
}
I have a socket connection already set up, my thing is what would be the best way to send a packet through sockets? My teacher wants us to convert the packet to bits first before we send it. I think he wants something like this:
Code:
struct packet{
int header
int message
int flag
}clientpacket; m
My question is how do we covert this to bits, before sending it. One of my friends said we can create a char[] array the size of the struct as a buffer. will memcpy() change the struct to bits if I copy it to the buffer?
this is how is suppose to look in bits for the header field/column.
Field : header
Field size(bits): 8
data format: Unsigned int
value example: 1
Value in bits: 0000 0001
I am confused, I think I send a structure over the socket but I did not convert it to bits before I sent it .
I want to apply program to send matrix from client and server ,and return back a processed matrix ..
How I can do it using UDP ,it was easy to use tcp for that!?
Verify my Method . I am not getting expected output ..
Code:
int Amount=500;
send(newSocket,Amount,4,0);
close(welcomeSocket);
recv(clientSocket,Amount,4,0);
// Amount= ntohl(Amount);
printf("Data received: %d",atoi(Amount[0]));