C++ :: Program That Simulate Card Game - Array Manipulation
Apr 26, 2013
Consider a program that simulates a card game, with multiple player hands and a deck to draw from. Each hand can use an array to represent the cards it contains; sometimes it is useful to also declare an additional variable for each hand (or deck) indicating exactly how many cards are present.
1) Describe a simple function that would manipulate both the array representing a hand and the number indicating the size of the hand.
2) Describe a simple function that might be able to manipulate the array without referring to the hand size variable at all.
3) Generally, if the array was passed as a parameter to a function, how often would the hand size be included as a parameter?
View 2 Replies
ADVERTISEMENT
Apr 23, 2013
I am struggling to finish up my game of War. There are a few problems I have ran in to. My shuffle function seems to work fine. I believe my problem lies within my game rules. When I run my code, the game usually plays all the way through but almost always ends in 'War'. I am struggling to get the game to restart after running once. I am not sure how to clear the list and start over.
Code:
#include <stdio.h>
#include <stdlib.h>
#include <math.h>
#include <time.h>
#include <Windows.h>
[Code] ....
View 4 Replies
View Related
Mar 26, 2013
I have an assignment where i am required to code up in C, a program to simulate a taxi rank that is implemented as a queue via an array that can hold up to a maximum of six taxis.When a taxi arrives, it joins the rear of the queue. When a taxi departs, the first taxi in the rank is used and its departure is logged.A "rolling menu" comprising integer codes as specified below is used until 0 is entered to exit the simulation. I've done this stage but now the next stage is asking me to implement the queue as a linked list. what the difference is between an array and a linked list and what is a linked list?
View 2 Replies
View Related
Mar 25, 2014
Basically i need to encrypt a message into ascii values & i also need to allow the user type some ascii values thus decrypting the values into characters that are placed within the code.
#include <iostream>
#include <iomanip>
#include <cstring>
#include <string>
using namespace std;
#define Q 2000
void main(){
char array1[Q]={"A gentle, dull flickering flame, burns in the marble hearth. Its dim light scarcely illuminates the small, cozy room with its quiet elegance. The dismal light plays softly causing shadows over the solitary figure of a wooden desk at which Allen was roaming through his memories. Thinking back in the past where he once had a friendship which was out righteously incredible. She was the girl of his dreams, in a way which she had everything he had ever sought out in a beautiful and clever girl. Most of all she had his heart. Her style was incredible in the way the outfits she would wear would match perfectly giving a deep vibrant lively feeling."};
int S[Q];
char S1[Q];
int x;
int i;
char e, d;
cin>>x;
if(x=d){
cin>>Q;
for(i=0;i<array1[Q];i++)
cout << S[i]<<endl;
for(i=0;i<array1[Q];i++)
cout << S[i]<<endl;
}
View 18 Replies
View Related
Jan 3, 2013
Array Manipulation - Transpose of a Square Matrix: This program reads a matrix (two dimensional array), displays its contents, transposes it and then displays the transposed matrix. And here's the code
Code:
#include <iostream.h>
const int arraySize = 3;
void readMatrix(int arr[][arraySize]);
void displayMatrix(int a[][arraySize]);
void transposeMatrix(int a[][arraySize]);
[Code] ....
When I compile the program it says 'mail' must return 'int' I think everything is right...
View 2 Replies
View Related
Aug 28, 2013
For a school homework i had to make a c++ program to generate a report card so i made this program
#include<iostream.h>
#include<conio.h>
void main()
{
[Code].....
The problem is that it does not take any values ps I have been learning C++ for 3 months so we don't have any arrays,at max we have iterations
View 5 Replies
View Related
Nov 14, 2013
Write a program that simulates coin tossing. For each toss of the coin, the program should print Heads or Tails. Let the program toss the coin 100 times and count the number of times each side of the coin appears. Print the results. The program should call a separate function flip that takes no arguments and returns 0 for tails and 1 for heads. [Note: If the program realistically simulates the coin tossing, then each side of the coin should appear approximately half the time.]
View 7 Replies
View Related
Jan 2, 2014
I want to get or view the SIM card number from the dongle (the dongle will b already connected to the computer where the SIM card will be inserted into it) but the coding should be done by C programming / Language.
View 5 Replies
View Related
Sep 9, 2013
i was reading trying to get it how to display the out put, all i got to is how to declare the arrays. How to start it also i saw some examples have " struct card"
the display should look like this:
2c 2h 2s 2d
3c 3h 3s 3d
4c 4h 4s 4d
5c 5h 5s 5d
6c 6h 6s 6d
7c 7h 7s 7d
8c 8h 8s 8d
9c 9h 9s 9d
10c 10h 10s 10d
Jc Jh Js Jd
Qc Qh Qs Qd
Kc Kh Ks Kd
Ac Ah As Ad
#include <iostream>
#include <iomanip>
using namespace std;
int main() {
int deck [13][4];
string suits [4] = {"h", "d","c","s"};
string values [13] = { "2", "3", "4", "5","6", "7"," 8" ,"9", "10"," J", "Q"," K" , "A"};
system ("pause");
return (0);
}
View 2 Replies
View Related
Mar 28, 2013
I am working on a c program which recovers jpeg files from .raw file of a memory card. My code is here-
Code:
#include<stdio.h>
#include<stdlib.h>
int main(void) {
File* inptr=fopen("card.raw","r")
if(inptr==NULL)
[Code]...
But while compiling it I get this error-
Makefile:2: *** missing separator. Stop.
View 2 Replies
View Related
Sep 13, 2014
I would like to make a program for calculating the total price of a game station, and a game. I made a program like this for just the price of a game in class, but I want to make one that does the game system as well.
View 7 Replies
View Related
Oct 17, 2013
Create a line class using a linked list that acts as a queue (first in, first out) both enqueue and dequeue. Complete the line class so that customers can be added or removed from the line. Implement the line as a linked list of customer objects that you have developed yourself or use the vector class.
View 2 Replies
View Related
Jun 8, 2014
I have not been using pointers that long i most of my stuff has not needed them but now they do i need to learn how to use them more. I'm writing a program that simulates the squares most landed on(for fun) and i cant get a method to work because of an array pointer.
The error is no matching function for call to 'GameLoop::Loop(int, int (*)[4])'
Here is the latest version of the code. I've been editing a lot of things so there might be some stupid errors but I've tring everything.
rolling.h and rolling.cpp are just some dice function they are working perfect.
main.cpp
#include <iostream>
#include "Rolling.h"
#include "GameLoop.h"
Rolling Roll;
GameLoop Game;
[Code] ....
View 2 Replies
View Related
Oct 22, 2014
Write a program to simulate a deck of 52 playing cards.
Represent your deck as a 2D Array where the value in the cell is the position of the card in the deck. Represent the names for the suits and faces as an array of Strings.
Write an algorithm to shuffle the deck.
Display the deck. For Example:
1 Jack of Spades
2 Deuce of Diamonds
3 Three of Diamonds
4 King of Spades
5 Eight of Clubs
6 King of Diamonds
7 Six of Clubs
8 Six of Spades
9 Eight of Hearts
Deal two hands of five cards each. For Example:
****** HAND 1 ******
Jack of Spades
Three of Diamonds
Eight of Clubs
Six of Clubs
Eight of Hearts
...
Below is what I have so far. Dealing two hands and displaying it. How would I be able to do that?
#include <iostream>
#include <ctime>
#include <string>
using namespace std;
void shuffle(int[][2]);
int main()
{
int j,deck[52][2];
[Code]...
View 2 Replies
View Related
Apr 28, 2014
I need to program and simulate a 2 floor lift control system. How to do that ? I need to design its program only.
View 1 Replies
View Related
Oct 26, 2014
Write a program to simulate a deck of 52 playing cards.
Represent your deck as a 2D Array where the value in the cell is the position of the card in the deck.
Represent the names for the suits and faces as an array of Strings.
#include "stdafx.h"
#include <iostream>
#include <string>
[Code].....
The problem: I am trying to connect the 1d arrays to the 2d arrays. Right now when I write: cout << deck[3][5] << endl; The output answer is 45. How do I populate the 2d array with the 1d arrays so that when I cout deck[3][5] I get it to say "Six of Spades"?
View 8 Replies
View Related
Feb 13, 2013
I'm trying to implement 2d array to simulate linked list for stack and I faced several difficulties doing so.
How do I implement from Top to Bottom ordering? How do I check random index value for validity?
Source-code:
Code:
#include <iostream>
using namespace std;
int myTop, index, nex = -1;
int twoDimentionalArray[25][3], L[25];
[Code].....
And one more thing: how do I get straight 0 from 25 index in the first coulumn?
View 1 Replies
View Related
Dec 26, 2013
I'm making a flash card type console application using visual studios 2013. The flash cards contain character that I can display using unicode. So far I am looking at about 200 characters across 2 unicode blocks which I don't want to hard code into my arrays. I thought of initializing my arrays using a loop. The only problem is I don't know how to add in hexadecimal. So is there a way to initialize my array without having to input 200 values my self? Also is hexadecimal addition possible without me having to write a function for it?
View 3 Replies
View Related
Mar 3, 2013
I am having trouble understanding the mantissa of a floating point number. I have divided up the floating point number into the sign bit, the exponent and the mantissa, I have found the exponent, but I am not sure what to do with the mantissa? From what I have gathered so far i divide the mantissa by ten until I get a number between 1 and 10. after that i convert the number into a decimal with everything after the decimal point (or radix) being a fractional number. But when I do that on paper I dont get my intended number. How do i put the exponent and mantissa together to make a decimal from my floating point?
ex. input is 00111010000111111111011000001000
sign is 0
exponent is 01110100 which is 64+32+16+4-127=-11
mantissa is 00111111111011000001000 which would be 1.11111111011000001
When i convert that i get 1.99756622314 i dont know what to do with the -11 exponent and the answer i want is 6.1e-4
View 1 Replies
View Related
Jan 20, 2013
I'm trying to find the errors in my emulation of VGA VRAM concerning graphics modes.
(I'm testing it by doing plotting of all colors from x=0 to x=xsize-1 (where the color is relative, so 0=0 and xsize-1=maxcolor (in the case of 16 colors it's 15, etc.)))
VRAM Graphics management:
#include "headers/types.h" //Basic type support!
#include "headers/hardware/ports.h" //Basic PORT compatibility!
#include "headers/hardware/vga.h" //VGA data!
#include "headers/mmu/mmu.h" //For CPU passtrough!
#include "headers/hardware/vga_screen/vga_displaygeneration_crtcontroller.h" //For virtual width in bytes within VRAM!
[Code] .....
View 1 Replies
View Related
Dec 10, 2013
I need a large string vector for file content manipulation.
v1.max_size() gives me 153 391 689.
But if I make a test by looping a vector pushing back strings it crashes around 16 - 26 000 000 though I still have a lot of ram (1GB left).
How come and why isn't vector size limited by ram instead?
View 11 Replies
View Related
Mar 24, 2013
Why my output screen for this program does not want to stay open. It only opens for a split of a second and it's gone. The program is supposed to take numbers from a input file and display and save the manipulation in the output file. Here is the program.
Code:
#include<iostream>
#include<fstream>
#include<iomanip>
usingnamespace std;
[Code] ....
View 6 Replies
View Related
Feb 15, 2012
I have the following function I would like to convert to work with std:string. I don't understand QT strings at all.
Code:
void FromHexString(const QString &hexText, void* pData, int dataSize) {
for (int i = 0; i < hexText.length(); ++i) {
bool ok = false;
((uint8_t*)pData)[ i ] = hexText.mid( 2*i, 2 ).toInt( &ok, 16 );
}
}
View 1 Replies
View Related
Jan 29, 2013
I wrote a template class for Matrix manipulation. The compiler cannot compile the source and complains
Matrix.h:144:41: error: expected initializer before ‘const’
What is the problem of the code enclosed below?
#ifndef MATRIX_H
#define MATRIX_H
/**
* @file Matrix.h
*The Matrix template class written for simplify the matrix manipulation.
*/
#include <cassert>
using namespace std;
template<typename T>
class Matrix {
int rows,cols;
[Code] .....
View 6 Replies
View Related
Dec 5, 2012
I work on a system that communicates with other systems via messages. Those messages are defined in a spec and every word must be exactly as defined. To accomplish this Ada allows me to define the fields of my record to specific words in memory.
Code:
word = 4;
type Msg_Type1 is record
x: Some_Type;
y: Another_Type;
z: Another_Type;
end record;
[Code] ....
View 5 Replies
View Related
Dec 9, 2013
I'm writing a program to keep score of a game of bowling. Whenever I run the program, it comes up with the correct starting point, but whenever i type in the first number and click enter, the program stops running and it gives a return value of something similar to 3221225477. Here is my code. I think the problem might be that I'm not using pointers..? but I could be way off..I'm new to programming.
#include <stdio.h>
int main() {
int frame[10][3] = {{0,0}, {0,0}, {0,0}, {0,0}, {0,0}, {0,0}, {0,0}, {0,0}, {0,0}, {0,0,0}};
int frameOutcome[10], frameTotal[10], currentFrame = 0, totalScore = 0;
[Code] ....
View 1 Replies
View Related
