#include<conio.h>
#include<windows.h>
#include<stdlib.h>
#include<string.h>
#include<time.h>
#include <stdio.h>
void loading();
void gotoxy(int x, int y);
int color(int x);
[Code] ....
How to produce a loading bar with percent progress.
#include<conio.h>
#include<windows.h>
#include<stdlib.h>
#include<string.h>
#include<time.h>
#include <stdio.h>
void loading();
void gotoxy(int x, int y);
int color(int x);
void gotoxy(int x, int y);
[Code] ....
How to produce a loading bar with percent progress below.
Why does my progressbar percentage text disapear when progressbar starts loading?? Am I missing out anything?
int percent = (int)(((double)(progressBar1.Value - progressBar1.Minimum) /
(double)(progressBar1.Maximum - progressBar1.Minimum)) * 100);
using (Graphics gr = progressBar1.CreateGraphics()) {
gr.DrawString(percent.ToString() + "%",
SystemFonts.DefaultFont,
[Code] ....
I'm trying to make a percentage counter inside a loop, printing each completed percent of the loop as it goes. I've managed to write such code, but when I run it the percentage output breaks down (becomes negative!) for large loops. I have an example below.
Code:
#include <iostream>
#include <sstream>
#include <string>
#include <stdlib.h>
#include <stdio.h>
using namespace std ;
int main() {
[code].....
Compiling and running the above yields the output:
Code:
...1% ...2% ...3% ...4% ...5% ...6% ...7% ...8% ...9% ...10% ...11% ...12% ...13% ...14% ...15% ...16% ...17% ...18% ...19% ...20% ...21% ...-21% ...-20% ...-19% ...-18% ...-17% ...-16% ...-15% ...-14% ...-13% ...-12% ...-11% ...-10% ...-9% ...-8% ...-7% ...-6% ...-5% ...-4% ...-3% ...-2% ...-1% ...0% ...1% ...2% ...3% ...4% ...5% ...6% ...7% ...8% ...9% ...10% ...11% ...12% ...13% ...14% ...15% ...16% ...17% ...18% ...19% ...20% ...21% ...-21% ...-20% ...-19% ...-18% ...-17% ...-16% ...-15% ...-14% ...-13% ...-12% ...-11% ...-10% ...-9% ...-8% ...-7% ...-6% ...-5% ...-4% ...-3% ...-2% ...-1% ...0% ...1% ...2% ...3% ...4% ...5% ...6% ...7% ...8% ...9% ...10% ...11% ...12% ...13% ...14%...100%
If I change the value of N to 1e7 instead of 1e8, the output is correct however!
Code:
...1% ...2% ...3% ...4% ...5% ...6% ...7% ...8% ...9% ...10% ...11% ...12% ...13% ...14% ...15% ...16% ...17% ...18% ...19% ...20% ...21% ...22% ...23% ...24% ...25% ...26% ...27% ...28% ...29% ...30% ...31% ...32% ...33% ...34% ...35% ...36% ...37% ...38% ...39% ...40% ...41% ...42% ...43% ...44% ...45% ...46% ...47% ...48% ...49% ...50% ...51% ...52% ...53% ...54% ...55% ...56% ...57% ...58% ...59% ...60% ...61% ...62% ...63% ...64% ...65% ...66% ...67% ...68% ...69% ...70% ...71% ...72% ...73% ...74% ...75% ...76% ...77% ...78% ...79% ...80% ...81% ...82% ...83% ...84% ...85% ...86% ...87% ...88% ...89% ...90% ...91% ...92% ...93% ...94% ...95% ...96% ...97% ...98% ...99%...100%
is there api for using a progress bar with wininet
View 5 Replies View RelatedI am close to getting this......the progress bar for wininet client ftp
int index;
CString strText;
index = m_dir.GetCurSel();
m_dir.GetText(index,strText);
[Code] ....
the problem with my code is that trace toggle can only be turn on, not off and trace does not demarcate the (substring) in progress. how do i fix this?
#include <iostream>
#include <string>
#include <vector>
using namespace std;
void displayOptions()
[code]....
Is there a way to make a circular progress bar in WPF without using another library or NuGet Package?
Like a tutorial on how to make it from scratch?
Right now, I'm using the existing ProgressBar UserControl but it looks horrible especially after I change the Foreground color from Green to DarkBlue.
Am developing windows forms application where in my form am fetching data into list from some object which takes around 2 minutes to complete processing so meantime i want to show progress bar before starting process till it ends with percentage. I have return a code to do multitasking but it is throwing error as "Cross-thread operation not valid: Control 'listOrg' accessed from a thread other than the thread it was created on".
private void btnOrg_Click(object sender, EventArgs e) {
try {
// To report progress from the background worker we need to set this property
backgroundWorker1.WorkerReportsProgress = true;
[code]....
I am running a windows forms project. on the form there is a datagridview, a progress bar, a textbox and two 2 buttons.
The two buttons are used to navigate through the records(one for next record and the other for previous record) the textbox displays the record that is being currently viewed.
How can I link the progress with the database or in this case the datagridview and when the next button is pressed it increments and when the previous button is clicked it decrements and also the progress to be fully filled when the last record is reached ?
For a project I'm working on, I need to be able to download a file from an FTP server and store it to a predetermined location with a predetermined name. No user interaction should be needed. Because the file is rather large, and I need the main program to remain responsive, this is going to need a progress dialog.
I could write all this myself and use the MFC wininet wrappers (CInternetSession et al) to do the downloading, but... Explorer already has this, and IE has such a dialog also. It doesn't seem unreasonable to assume those dialogs are available via some API.
Is a "FTP download with dialog" available as a windows API, or do I really need to write all this myself ?
I'm having problems with progress bar when using a big number in set range. For numbers below 50000 it works very well but for big numbers like 100.000 it doesn't work, it makes 2-3 rounds of animation
Code:
int number= 50000; // 50k works well but if i put 100k it won't work (it will animate 2-3 rounds instead of complete one)
progressbar1.SetRange(0, number);
progressbar1.SetStep(1);
for (int i = 0; i < number; ++i) {
listcontrol1.InsertItem(i, _T("whatever"));
progressbar1.StepIt();
}
What's wrong with the code ?
I'm making a quiz game in c++. I've already completed it. But now I've thought of creating a profile and saving the progress for the user so when he enters his name the game continues frm where he had saved it.
View 3 Replies View RelatedI have a module that pings the network to find available devices using threading.
the money line:
var valids = range.AsParallel().AsOrdered().Where(ip => ip.Ping()).ToList();
The problem is, I need to display a progress bar while this function runs. I have the progress bar implemented with a background worker, but it won't update while the ping module is executing. I *think* it's because I'm using the available threads for the ping module.
When the user clicks a button, I need the ping module to run while the progress bar updates, or even just set IsIndeterminite to true. What would be the best way to accomplish this?
[URL]
According to my project instructions, I have to make a "validation on the delete button, that before a record can be deleted it will check to see if the count of "In-Progress" orders for that product is 0. If it is greater than zero, it should not allow this record to be deleted."
So far I have on the code behind page:
protected void btnDeleteProduct_Click(object sender, EventArgs e)
{
DataView dv = (DataView)SqlOrders.Select(DataSourceSelectArguments.Empty);
[Coe].....
The professor said I have to: "As for getting the count, check your notes and book, specifically looking at SQL and the Aggregate functions. There is a function we talked about in class called "Count(OrderID)" and set the where clause to check for the productID.
What is the traditional way to monitor a blocking subroutine that is using a file stream as its input? That is, what is the traditional way to make a progress meter in the console?
Say I have a function that takes in a filestream and works with it. Suppose this file stream has a position and length property like in C# FileStream:
Code:
void sub (filestream file)
{
//read a bit of the stream, which advances stream cursor position
//do something
//repeat until all of file stream has been used up
}
Presumably the function is chomping along the file stream as it is doing some calculations serially on the file stream.Because the function is blocking, there is no way to access the file streams position and length in this thread. So naturally it seems like the best thing to do to monitor the progress of that function is to make another thread and pass it the file stream object as a parameter, and in this separate thread, monitor the distance between filestream's position and length to determine how much of the file stream has been used up, and every second or so output the amount of file stream used onto the console.
I created class called students which suppose to store students names of in array but when I call the display function it display only the first name. but I want it to display names depending on the array size.
#include <iostream>
#include <sstream>
using namespace std;
const int SIZE=5;
[Code]....
I would like to make a program that automatically launches and loads a file when a file of that file type is double clicked within windows. As said I am unsure where to look for some information as to how to do that, and so turn to you all. Is there a simple way of doing such a thing without using any external libraries, if so, a simple tutorial or link to a reference for this; if there is no way of doing this without externals what would be a small and simple to use library for this?
View 2 Replies View RelatedWhat's the best performance library for loading images in PNG?
View 5 Replies View RelatedAlright i have my program and it loads the vector fine and even puts the vector into a txt file but when it comes to lloading it again im not sure if it works or not
#include <iostream>
#include <string>
#include <fstream>
[Code]....
The program is supposed to read in a text file, load it into an array and assign a character to each number in the array (so for this I'm thinking I'll be creating 2 arrays, an int array with the numbers read in from the file, and a char array with the characters assigned to the numbers). It will then print these two arrays. It's then supposed to go through the initial int array and search for any numbers whose values differ from their neighboring values by more than one, if such a value is found, it's supposed to give the number the value of the average of it's neighboring values. It's supposed to make all these corrections and then assign characters to these corrected numbers and print out both arrays.
How to load the array from the file. My textbook seems to do a good job of covering arrays and files, but it doesn't really bring them together and talk about building arrays from files. Here is what the file looks like, the first number is the size of the array.
10
7 6 9 4 5 4 3 2 1 0
6 5 5 5 6 5 4 3 2 1
6 5 6 6 7 6 8 4 3 2
1 5 6 7 7 7 6 5 4 3
5 5 6 7 6 7 7 6 5 9
5 6 7 6 5 6 6 5 4 3
5 6 7 9 5 5 6 5 4 3
5 5 6 7 6 6 7 6 5 4
5 9 5 6 7 6 5 0 3 2
5 5 5 5 6 5 4 3 2 7
And here is the code I have so far:
#include <iostream>
#include <fstream>
using namespace std;
[Code]....
When I attempt to compile this (I'm working on a Linux system), I'm getting several errors:
prog1.cpp: In function ?int main()?:
prog1.cpp:37: error: expected unqualified-id before ?[? token
prog1.cpp:39: error: ?numArray? was not declared in this scope
prog1.cpp:39: error: expected primary-expression before ?]? token
I have this game that I have to make modifications to, it compiles without errors but when I run the game it breaks. Im not very experienced with c++ but im assuming theres an error because it cant find or load the mesh, when it runs, visual studio breaks at the mesh.cpp line 638
View 14 Replies View RelatedWhat is the most efficient (fastest) way to load data from a file on HDD to RAM? (which would allow to only load a limited section of that file - eg. load only half of the file etc.)
View 3 Replies View RelatedI am trying to copy the stats from the save file "lol.txt" to main. I posted what the contents of the file below, but for some reason the I get for output jiberish and I cannot seem to figure out why.
#define _CRT_SECURE_NO_WARNINGS
#define MAX_NAME 31
#include <stdio.h>
int main(void){
char sName[MAX_NAME];
[Code] .....
I have a function that essentially takes a screen shot and saves a pointer to it as a structure. I would like to use the same structure for bitmaps that I load from files.
Code:
typedef struct _BITMAPCAPTURE {
HBITMAP hbm;
LPDWORD pixels;
INT width;
INT height;
} BITMAPCAPTURE;
BOOL CaptureScreen(BITMAPCAPTURE* bmpCapture) {
[code].....
The handle to the bitmap, as well as the width and height are all easy enough to get but I'm unsure of how to get the pixels.
I know this is more simple than I am making it out to be. I have a solar panel hooked up to an 8-Bit ADC and linked into my Microprocessor. I am trying to take the Binary readout from the ADC and convert it to a decimal number to be displayed on the boards LCD display. I am wiring the ADC to PORTA on my Motorola Freescale Board. This is for a final project for my electronic systems class due on Monday...
View 3 Replies View Related
