I am wanting to have a text file which is named with the user input and appended with .txt.
cout << "Please enter a new filename for storing new coordinates in: ";
char name[50];
ofstream output;
cin.getline(name, 50);
output.open(name + ".txt");
Get an error with this code on ".txt".
I am writing a simple file/text parser to read a config file for some code I am working on. It's dead simple and not particularly smart but it should get the job done. The code reads a config file:
Code:
readlength=2500000
start=0
finish=25000000
cutoff=20000
samplingfreq=250000
poles=10
filterpadding=500
}
[code]....
Here is where it gets wierd. You'll notice that there is an unused variable (filepath) in the config struct. This variable is not referenced or used anywhere in the code, ever. Yet if I comment out the declaration of char filepath[1024], the code segfaults partway through the read_config() function.
My best guess is that there is a buffer overflow elsewhere and it just so happens that the memory allocated for filepath happened to be there to catch it up until now, but I can't work out where it might be happening. With the declaration commented out, the read_config() function gets as far as reading the "padding" variable before it crashes. Yet when the declaration is there, then all the variabled are read correctly and everything seems to work.
Can i edit records stored in file without rewriting whole file again .?
View 1 Replies View RelatedCode to write data(Double type e.g 12345.67891) in text file like pattern given below. Remember to put tab between each column.
-----------------------------------------------------
Column1 Column2 Column3
Value 1 Value 2 Value 3
Value 4 Value 5 Value 6
Value 7 Value 8 Value 9
----------------------------------------------------
& Also how to read data from this file.
[URL] when I try to write my output to a file. I am building a life insurance premium calculator with c++. What my calculator does is read in a text file called "policies.txt" containing a number of different policies. For example:
Pol1 M N 20 100000 1 .04 99
Pol2 F S 30 100000 1 .05 99
Pol3 M S 72 750000 1 .03 99
Pol4 F N 45 1000000 1 .05 99
And using this, it creates a single premium. Once the calculator calculates the premium of each policy, I want it to write out the premium amount of each policy to a textfile called "output.txt". The problem is that when I check my "output.txt" file, only the premium for the last policy shows up. It only reads:
Premium for Pol4 is 220384
When I want it to read:
Premium for Pol1 is 14101.6
Premium for Pol2 is 14221.2
Premium for Pol3 is 582391
Premium for Pol4 is 220384
How come only the last policy is showing up? and is there any way to make all four policies appear in my output text file? Here is my code:
double ratesmn[86] = {
#include "MaleNonSmoker.txt"
- 1
};
[Code]....
My program involves trajectory planning using cubic spline method for a robotic arm. In the process, I had to calculate joint angles for each point in the path. In the last few lines of the code I need to write the values for counter and theta1 into a text file which I called "Test.txt". I am doing this using a nested for loop(the counter runs until it reaches 19 and hence need 19 theta1 values corresponding to it). However, I can't get all the theta1 values transferred to the text file.The statement within my inner loop is wrong and don't know how to fix it.
for(i=0;i<num_via;i++){
current_time = GetTickCount();
//joint[0] = mult_joint[i][0];
//joint[1] = mult_joint[i][1];
//joint[2] = mult_joint[i][2];
//joint[3] = mult_joint[i][3];
[code]....
fstream ifs;
ifs.open ("data.str", ios::binary | ios:ut);
char *data1 = "data1";
char *data2 = "data2";
ifs.write(data1, strlen(data1));
ifs.write(data2, strlen(data2));
when i this,data2 is not going under data1, i thought each write starts on a new line?
I want to write a single line to a file and upload it as a .txt file to a server directory . I know the traditional way to upload a local file to a server
public bool ftpTransfer(string fileName){
try {
string ftpAddress = "test.com";
string username = "test";
string password = "test";
[Code] ....
is there anyway to change this so that I can write the contents of the file through the program and upload it directly without having a local file?
I'm new to C and encountered a weird problem. Here's the code:
int main(){
char name[]="";
readname(name) ;
printf("The filename is: %s
",name);
printf(name);
[Code] ....
I compile this with no problem, but gives "File could not be opened". the strcmp tells me name and "snazzyjazz.txt" are not equal. but when I print them I get the same output.
I'm trying to make a program that you input your login info and it writes that info to a text file. Then, later on once I get my problem fixed, the program will read the info to the user. my code is as follows(the input part is a bit lengthy):
// Password Log
#include <iostream.h>
#include <fstream.h>
#include <string>
#include <time.h>
using namespace std;
ofstream login;
[Code] ....
What my problem is when I choose "Input new login info" it automatically inputs I have no clue, and calls next program.
I am trying to establish a connection between client and server to send a file to the server from a client. I have been successfully able to send files to the server but i am facing a problem with the the filename whenever i try to send any string to the server and use it in naming the filename at the server side, the string is successfully concatenated but it saves the filecontents in the filename.
for example: i am sending a file hello1.txt to server and the server has to save it as abcxyz.txt as i am sending the "xyz" from the client. BUT Whenever i am doing this ,the file saves as abcxyzfilecontents.txt If i saved in the .txt file "you123" ,my file at server side would save as abcxyzyou123.txt
Here are my codes:
Know that the server code implements a multi threaded server. The functionality to be discussed is defined in myfunc
Code:
server.c:
#include <stdlib.h>
#include <stdio.h>
[Code].....
I wrote a program to write text contents to file stream through fputs, the file stream address was changed in the middle of writing text content to the stream (11% text content have been put into the file stream), that cause the file stream pointer can be evaluated problem and raise exception on stream validation code in fputs library function, my question is what things could go wrong to make file stream pointer changed its address to something else or a NULL pointer if the file stream have not been flushed and closed.
View 5 Replies View RelatedI was trying to make a program in C that could take Personality Information from the user and store it in a text file. Then, when asked, could compare the results to other entries in the so called "data-base" and tell which is the best match. I tried a whole lot but couldn't think of a proper way.
(Stings and File IO are not my strong points)
I am using Code Blocks 10.05 and the standard GCC compiler.
I'm having the upmost hardest time doing this program that basically validates the user's input with a text file. The text file is like so and below that is the work I have so far...
"user1"
"pass1"
"user2"
"pass2"
etc!
[Code].....
struct x
{
y *GetY(); //error: what is "y"?
struct y
{
};
};
Why does GetY have to be declared after struct y is declared? I thought order of class members in C++ did not matter? Does it have to do with the way parsing is done?
EDIT: It also doesn't work if I typename x::y *GetY();, which makes even less sense to me.
EDIT: It works if I forward declare, but this goes against everything I know about C++ classes...
Write a program to generate a report based on input received from a text file. Suppose the input text file student_status.txt contains the student’s name (lastName, firstName middleName), id, number of credits earned as follows :
Doe, John K.
3460 25
Andrews, Susan S.
3987 72
Monroe, Marylin
2298 87
Gaston, Arthur C.
2894 110
Generate the output in the following format :
John K. Doe 3460 25 Freshman
Susan S. Andrews 3987 40 Sophomore
Marylin Monroe 2298 87 Junior
Arthur C. Gaston 2894 110 Senior
The program must be written to use the enum class_level :
enum class_level {FRESHMAN, SOPHOMORE, JUNIOR, SENIOR } ;
and define two namespace globalTypes (tys and fys) for the function :
class_level deriveClassLevel(int num_of_credits) ;
The function deriveClassLevel should derive the class_level of the student based on the number of credits earned.
The first namespace globalType tys should derive the class level based on a two year school policy.
and the second namespace globalType fys should derive the class level based on a four year school policy.
Four Year School Policy:
Freshman 0-29 creditsSophomore 30-59 credits
Junior 60-89 creditsSenior 90 or more credits
Two Year School Policy:
Freshman 0-29 creditsSophomore 30 or more credits
NOTE : use ignore() function with ifstream objects whenever you want to ignore the newline character.
For example :
ifstream transferSchoolFile ;
transferSchoolFile.open("student_status.txt", ios::in);
while( !transferSchoolFile.eof()) {
getline(transferSchoolFile,name) ;
transferSchoolFile >> id >> credits;
transferSchoolFile.ignore(); //Used here to ignore the newline character.
….
}
I did this in parts so I got it working with a four year criteria without the user defined name spaces.
include <iostream>
#include <fstream>
#include <string>
using namespace std;
enum class_level { FRESHMAN, SOPHOMORE, JUNIOR, SENIOR };
[Code] ....
So that worked fine then I tried with name spaces -
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
enum class_level { FRESHMAN, SOPHOMORE, JUNIOR, SENIOR };
class_level classLevel;
[Code] ....
I know I have some stuff to mess around with but I am currently stuck with two errors, first -
Error1error LNK2019: unresolved external symbol _main referenced in function ___tmainCRTStartupC:UsersstephenDocumentsVisual Studio 2013ProjectsinputConsoleApplication1MSVCRTD.lib(crtexe.obj)ConsoleApplication1
then -
Error2error LNK1120: 1 unresolved externalsC:UsersstephenDocumentsVisual Studio 2013ProjectsinputDebugConsoleApplication1.exeConsoleApplication1
Program Description: Write a program to generate a report based on input received from a text file. Suppose the input text file student_status.txt contains the student's name (lastName, firstName middleName), id, number of credits earned as follows :
Doe, John K.
3460 25
Andrews, Susan S.
3987 72
Monroe, Marylin
2298 87
Gaston, Arthur C.
2894 110
Generate the output in the following format :
John K. Doe 3460 25 Freshman
Susan S. Andrews 3987 40 Sophomore
Marylin Monroe 2298 87 Junior
Arthur C. Gaston 2894 110 Senior
The program must be written to use the enum class_level :
enum class_level {FRESHMAN, SOPHOMORE, JUNIOR, SENIOR } ;
and define two namespace globalTypes (tys and fys) for the function :
class_level deriveClassLevel(int num_of_credits) ;
The function deriveClassLevel should derive the class_level of the student based on the number of credits earned.
The first namespace globalType tys should derive the class level based on a two year school policy.
and the second namespace globalType fys should derive the class level based on a four year school policy.
Four Year School Policy:
Freshman 0-29 creditsSophomore 30-59 credits
Junior 60-89 creditsSenior 90 or more credits
Two Year School Policy:
Freshman 0-29 creditsSophomore 30 or more credits
NOTE : use ignore() function with ifstream objects whenever you want to ignore the newline character. For example :
ifstream transferSchoolFile ;
transferSchoolFile.open("student_status.txt", ios::in);
while( !transferSchoolFile.eof()) {
getline(transferSchoolFile,name) ;
transferSchoolFile >> id >> credits;
[Code] ....
I know I have some stuff to mess around with but I am currently stuck with two errors, first -
Error1error LNK2019: unresolved external symbol _main referenced in function ___tmainCRTStartupC:UsersstephenDocumentsVisual Studio 2013ProjectsinputConsoleApplication1MSVCRTD.lib(crtexe.obj)ConsoleApplication1
then -
Error2error LNK1120: 1 unresolved externalsC:UsersstephenDocumentsVisual Studio 2013ProjectsinputDebugConsoleApplication1.exeConsoleApplication1
How to write speech to text application? Without any plugin all code by myself like Google or Microsoft SAPI or Apple Siri
View 16 Replies View RelatedI'm doing a project. And I want to give the user the ability to write methods just like you would regularly in c# during runtime and then use them during runtime. Is such thing even possible? If so how?!
View 12 Replies View RelatedI'm trying to output text to a window using sfml, but I don't know where to start. Using version 1.6 of sfml.
View 7 Replies View RelatedI want to open a command prompt from a console application in a separate window and write some lines of text in the new command prompt.
In the Below code it is not opening the new cmd and not writing the text...
Here is the code:
public static int Main(string[] args)
{
int retValue = 0;
try
{
ProcessStartInfo MyProcess = new ProcessStartInfo();
MyProcess.FileName = "cmd.exe";
[Code]....
I am writing a program for a class where the user enters their age, how much money they have, and their full name. I know that I have to use the getline method to get the user's full name, and I know that I have to use cin.ignore() before that code, but i'm not sure why I have to use cin.ignore()?
View 1 Replies View Related im writing a program that asks the user to input a number 1-10 and will transform it into the roman numeral of that number but it seems that its not after the user inouts the number nothing will output
#include <iostream>
#include<iomanip>
using namespace std;
[Code]....
I have a header file that declares some fields as private, I then have a class that I need to compare two of the objects' information for equality but neither of them are the calling objects. I cannot alter the header file. How would I go about comparing private data fields? I will enter a brief bit of code for clarity.
Code: // Header File
// stuff.h
class stuff
{
private:
int* arr[20];
int size;
};
bool equal (const stuff& a, const stuff& b);
[code].....
I am currently doing the assignment about linked list. Here are some details information about what I am doing.. This program is C++ and should run on Visual Studio 2010. And it contains three file, two datastructure header and one main cpp file.
This program is trying to arrange and show some sports records. The main program which contain the functions such as reading the result text file(each result text file contain several records of athletes), removing a file, arranging the totalresult and printing it out. And the main program is already given and I cannot overwrite it.
But when I finished and try to build the solution and run it, I am not able to run the program and it give me somethings like these...
warning C4172: returning address of local variable or temporary
error C2248: 'Datastructure1::Datastructure1' : cannot access private member declared in class 'Datastructure1'
see declaration of 'Datastructure1::Datastructure1'
see declaration of 'Datastructure1'
This diagnostic occurred in the compiler generated function 'Result::Result(const Result &)'
And I have tried to comment each function part of the header file and see if can run or not. But I still fail to do so. Here are my codes...
#ifndef DATASTRUCTURE1_H
#define DATASTRUCTURE1_H
class Datastructure1 {
Public:
Datastructure1( );
[Code] ....
There are two header files and look quite long. They are all some linked list functions . I have read and learn linked list data structure before I complete this programs. However, when I complete the functions required, the function cannot be compile....
this is the code:
Code:
#include <stdio.h>
#include <string>
#include <iostream>
using namespace std;
int main () {
int result,i,j;
[Code] ....
and it doesn't find it. it says the the word:"Users" is incorrectly formed universal character name ....