parsing integers and characters in same line.
I trying to parse g8,7.
{
token = strtok(NULL, ",");
token2 = strtok(NULL, "g");
}
I am trying to make 8 an integer so that i get two integers 8 and 7.
I already know how to get 7, but every time i do it i get (0,7) instead of (8,7).
I was loaded a bmp file in my mfc window and stored rgb data in a file.My image size is 320x240.
Is possible to pick a single point (location) from that bmp image (Not the whole window)?
i like to plot a line graph using the pointed single line data using the stored file data?
here R is X Axis and G & B is Y Axis.
If i have 2D array of data means how can i plot the line graph?
So I have this assignment to read a file in, malloc some arrays, run it through a perceptron and to display the final weights. I have the majority of it already written but this is only my third program in C and I'm more familiar with Java and Python than C.
The problem I'm having is when I read in command line arguments, I can't seem to parse integer values from the strings in argv[i] by using atoi().
I've included the piece of code where I'm trying to 'parse.' I understand atoi convers ascii to integer, but I don't understand if it just gives you the ascii code or the number that it actually represents. I attempt to use atoi on lines 33-35
The input arguments in the command line are:
bob in.csv 100 5 10
int main(int args, char* argv[]){
int ** ra; // array of array of pointers
FILE *ifp; // file pointer
char cc; // char var for reading input from file
int i = 0; // counter
[Code] ....
Here`s the text:
You have to expect the following input : an arbitrary amount of lines, each line consists of 5 int32 numbers. The full input will be terminated by an EOF.
E.g.:
1 2 3 4 5
6 7 8 9 0
...
You`re then supposed to convert the numbers to integers and do some calculations. I would know how to parse a single line of 5 numbers via scanf(). That`s easy, and that`s exactly what they did in class.
But how do i go about splitting the lines? What about the EOF? Even if could hack something together, by using errno or something, it would be way beyond what they are doing atm. The input is received via user input, ie stdin.
Are there any examples how to parse a matrix:
Code:
const string ABC = "
A B C D
A 1 -1 2 14
B 0 -2 -4 8
C 6 2 2 3
" so if i have it as a string stream and then loop through each line like this:
Code:
istringstream in (ABC);
for (string line; getline(in, line); ){
vector<char> vec(line.begin(), line.end());
for (int i = 0; i< vec.size(); i++)
cout << vec[i] << "
";
}
I get my strings chopped into characters. but how to chop it into "meaningful" characters so that -1 is not - and 1. is there any quick way for that to happen ??
Suppose I have read a line from an ASCII file with fgets(). Now I want to parse the line, which looks something like this: Code: # John Q. Public et al. 2014, to be submitted The name, "John Q. Public" is what I want. However, the name can be anything, consisting of 1 or more tokens separated by spaces. it could be "John" Or "John Public", or "Thurston Howell the 3rd", or etc... Bascially, I need to get the entire substring between the first hash mark, and the "et al" in the line. I tried this: Code: sscanf(line,"# %s et al.",name); But I can only get the first token (which, in this case, is "John").
View 2 Replies View RelatedI have to make a c++ program, in which with an algorithm I have to code a text from a file and write it to another file. The input should like this: "code forCoding.txt toBeWritten.txt" ; or like this: "decode toBeReadFor.txt toBeWrittenIn". I have done everything except one thig: It is says I have to be able to input parameter.
How should i write this? I read [URL] ....., but still dont get. The input of my program has to have 3 strings, so I guess argc should be 3, but I dont really get it. What should I have in my main about this parsing command line parameters?
I'm getting this when I compile my program. Then, when the program runs I get an error. I assume it is because I have the warning for this problem. How can get around this error.
warning C4172: returning address of local variable or temporary
Code:
#include <iostream>
#include <cstring>
using namespace std;
[Code]....
my professor just increased the problem by saying the time value should be passed as command line arguments can anybdy tell the code to parse time as command line arguments
View 10 Replies View RelatedWrite a program that reads four integers from a file ‘input.txt’.
The program will then create a single integer number from the four integers. The output of the program will be the single number and single number + 600.
#include <iostream>
using namespace std;
int main () {
int number , a;
cout<<"enter en integer number";
cin>>number;
cout<<"add 600 to the number"
cin>>a=number+600;
return 0;
}
I am trying to create program which will process command line arguments and define which functions should be run, with specific order and specific arguments. This is my first problem:
Code:
// proccessing_args.cpp : Defines the entry point for the console application.
//
#include "stdafx.h"
#include <vector>
#include <string>
#include <iostream>
#include <conio.h>
using namespace std;
int _tmain(int argc, _TCHAR* argv[])
[Code] ....
proccessing_argsproccessing_args.cpp(20): error C2143: syntax error : missing ',' before ':'
refers to the line with for. I copied the code form here [URL] .....
My question is on c++ strings. At the moment my program is reading input in one line at a time after the user presses enter.
I want to read multiple values in on a single line. Example: "apple banana orange end" ... How would I do this?
MAIN Code:
#include "Header.h"
#include "Orange.h"
#include <iostream>
#include <string>
#include <cctype>
using namespace std;
[Code] ......
How would i get the total amount of elements From the input file(The .dat file) and then store them in a variable?Here is an example to show you what i want. If a line on the .dat file looked like this
1 2 3 4 5 6 7
How would i find the total number of elements? For example the total number of elements in this line would be 7.
I took a month's break from programming, and got rusty. Here's the problem:
The character 'b' is char('a'+1), 'c' is char('a'+2), etc. Use a loop to write out a table of characters with their corresponding integer values:
a (tab) 97
b (tab) 98
...
z (tab) 122
I have been skimming and searching but dont know how to word the search just right to find what I need to know. I have written simple stuff with the support of tutorials like weight conversion or loops counting up to a set number. Nothing amazing. The other day I found out how to input and print a string rather than a single text character which i though was bad ass. I even got it to read multiple strings on a single line and found a way to read multiple lines. I can even format it to read both integers and characters on the same line as long as I know the predefined format.
On to my question... How do I read multiple lines with both carecters and integers. for instance:
nissan 1996
toyota 1998
or more comples like
nissan gtr 1996
toyota markii 1998
I want to use
int year;
char make[10]; maybe need to use char make[10][10]; for an array i would guess.
char model[10]; optional for the extra data
but reproduce what i read in a different order. say...
1996 nissan
1998 toyota
vice the original format.
this is what I have tried.
Code: scanf("%s %s", &make,&year);
//The way I seen to read multiple lines was on here
scanf("%[^/t]", %make);
But this wont let me separate the two into two differnet definded data types. Let alone use printf to display them in reverse order.
The code I have is below. Im able to print them all onto one line but I need to print 10 per line separated by commas and Im not sure how to do that ):
for (int i = 0; i < MAXVALUE; i++){
for (int j = 0; j < counts[i]; j++){
output << i << ",";
The code is supposed to convert characters from an array into their respective ascii integers, and append a 0 if the number is less than 3 digits long. It then supposed to put it all together into one string.
Code:
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
int main(void){
char file[] = "This is a test";
char *ptr = file;
int length = strlen(file);
int i, numbers[length];
[Code] .....
void printList(int list[],int cnt,int numsPerLine){
for(int i=0;i<cnt;i++){
cout<<list[i]<<" ";
if((i%numsPerLine)==0)
cout<<"
";
} }
So cnt is 20, numsPerLine is 10, and list[] is initialized with a const = 20
i%numsPerLine on the first loop equals 0 and thus outputs a new line.
I'd like it to new line after 10.
I know this works as expected if your command line arguments are strings.
#include <stdio.h>
int main( int argc, char *argv[] ) {
printf("Program name %s
", argv[0]);
if( argc == 2 ) {
printf("The argument supplied is %s
", argv[1]);
[code]...
Would you be able to do something similar to this if you have integers or would you need to use the first method then convert it with atoi?
#include <stdio.h>
int main( int argc, int *argv[] ) {
printf("Program name %s
", argv[0]);
if( argc == 2 ) {
[code]...
I have a file with such a format:
string string 8 7 2
string string 7 12 19 -4
string string 1
As you can see I don't know how many numbers there are at the end. I have this code now:
while(!in.eof()) {
kr = 0;
getline(in, pavard, ','); getline(in, vard, ','); getline(in, gr, ',');
while(in.peek()) {
in >> k;
kr += k;
}
in.ignore();
}
in.close();
I tried various combinations with peek() function, but nothing worked.
I am writing a program using ncurses that needs a function to highlight a line of characters on the screen. I started writing this function that took the x & y coordinates of a character on the screen and the length of characters after that to highlight. Whilst doing this I noticed that if I highlighted the last character in a row (maxX-1 in my example) it highlighted that character (as expected), and if I highlighted just the character before that (maxX-2) it also works. But if I do both, it highlights the whole row/line. Also, if there are characters in those spaces other than the 'space' character it works too, but for my program I need to be able to highlight empty spaces as well.
To highlight I am using inch() to get the character and addch() to print it because I am using some alternate characters that chgat() replaces with normal characters.
#include <ncurses.h>
int main(){
initscr();
start_color();
use_default_colors();
curs_set(0);
noecho();
int maxX=0, maxY=0;
[Code] ....
I'm trying to print Chinese/unicode characters to a line printer(EPSON LQ-2090) using the writePrinter method in c++.
ANSI characters print fine, but when I throw the buffer of widechar Chinese characters at it, they come out like garbage/ANSI chars.
while debuging string shows chinese characters but in memory it shows ANSI characters not chinese and these ANSI characters are get printed on printer.
Note that if I change the DocInfo datatype parameter to "TEXT" instead of "RAW" then also the Chinese characters donot print.
Is there a way to get Chinese or unicode characters to print correctly?
How can a mulitline string be read line by line
ex: str = "PERIOD="week"
DAY="day"
TIME="time"";
I'm a beginner at c++ and I need to write a program that reads a set of integers and then finds and prints the sum of the even and odd integers. The program cannot tell the user how many integers to enter. I need to have separate totals for the even and odd numbers. what would I need to use so that I can read whatever number of values the user inputs and get the sum of even and odd?
View 2 Replies View Relatedso my question is i want to print characters,no string just an array of characters,i do this but it s not working,maybe i have to put the '' at the end?
Code:
int main() {
int i;
char ch[5];
for(i = 0; i < 5; i++) {
scanf("%c",&ch[i]);
[Code]...
Im supposed to find the common characters between two string characters, assuming that the user wont input duplicate letters like ddog. When I run my code I get an output of a question mark upside down. Here is my code with comments on what each part is supposed to do
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main(){
char str1[20], str2[20],remp = ' ';
int size1,i,j,temp;
printf ("Input the first string");
[Code]...