I have written a program to capture signal from machine and display it on screen in the form of sinosoidal wave. I have print buffer for 256 X 400 pixel strip chart. This prints fine if I set page size A4 and resolution 600 DPI. If anyone changes print parameters , there is problem. I can resize the printer buffer and interpolate the stored signal.
My problem is , how to find the printer resolution from GetDeviceCaps ? how to know the Print Type Normal / Draft etc in mFC.
I am using PDF Creator printer to print my files. I have set it as default printer. It displays two dialogs .. "Printer Setup Dialog" and "Dialog asking filename and other details to save to file".
I want to avoid these two dialogs. But EndDoc calls the other dialog by default. How to do this ?
I have a dialog box with several edit control boxes and I want to identify the edit control when I click the left mouse button on it. Any button action (up or down) doesn;t register when the mouse is clicked on any of the edit controls. There has got to be a simple way to do this.
I have a question concerning the CDialogBar (:CControlBar).
I have a MDI application with a dockable toolbox (CDialogBar).
The user is able/allowed to move the DialogBar and to dock it at the right or left side When I dock at the left side, the content of my mdi-application (so all other open windows) are moved right (so the dockable bar moves the windows).
If i dock at the right side, nothing changes.
How can I change the behaviour of the bar, that the windows inside the application keep the same position when I dock left ?
(Problem is, that my windows are aligned on the right side of the application). When I dock the bar on the left, the windows are getting moved in the not visible area.)
take a look at this project : [URL] i want to change this project for this purpose : when a USB PRINTER is connected show a message that tell us -> hey this is a printer. which part of this project should i change and how can i separate printer devices from the others?
note: if you are using visual studio 2010 or higher and get error for this line after conversion :
#define _WIN32_WINNT 0x403
just replace all of such these lines to stdafx.cpp file. means stdafx.cpp at last should be like this :
// stdafx.cpp : source file that includes just the standard includes // HWDetect.pch will be the pre-compiled header // stdafx.obj will contain the pre-compiled type information #define _WIN32_WINNT 0x403 #include "stdafx.h"
I'm not new to C++ programming but I'm not an expert either. I'm using Borland C++ builder 5. I know it's extremely antiquated, but I have no choice right now. Writing a database reporting program, using third party report building components (ACE) which has it's own print dialogs built in. However, in this report we cannot use the build in dialogs and have to use a standard TPrintDialog. When the TPrintDialog is executed and you click print on the dialog, only one page is sent to the printer.
Here's some code:
// The dataset for the report is executed prior to this code and does not //change.
Once the data is gathered, the report can be run as often as you like // and the same data will appear in the report.
Write a program to simulate a printer queue (priority queue or heap – Bentley article has code) where 3 printers are “fed” by this queue. Each print job has an unchanging priority and higher priority jobs go first (although once started, a job isn't stopped to let a higher one go). For each unit of time, there is a 26% probability that a job will be added to the queue and all jobs take 8 time units to complete. Print job priorities are between 5 and 100. The queue opens 20 time units prior to the start of printing for adding print “jobs”. A print “day” is 1000 time units. The output from your program is:
1) A list of jobs completed with their priorities for each printer
I have a test web page and a windows form which call a printer and sends a print job to a printer that is on the network. I have been able to successfully do this from the windows form, however, I can figure out how to do it from an aspx page to the server's default printer. Sample codes are below.
Windows Form: public partial class Form1 : Form { private const string TEMPLATE_DIRECTORY = @"C:Program FilesBrother bPAC3 SDKTemplates"; // Template file path private const string TEMPLATE_SIMPLE = "NamePlate1.LBX"; // Template file name private const string TEMPLATE_FRAME = "NamePlate2.LBX"; // Template file name public Form1() { InitializeComponent();
I'm in the middle of creating a ePOS for my uncle and so far I've created a database for it where it will create, update and delete records successfully.
My next step I would like to do is to create a printer till thing, but how do I connect my database to that ?
I can create a till but how do I do link my database with it? I followed this example here [URL] ....
We have an assignment in which we have to implement a printer spooler using linked lists. I have used the list from STL to implement everything. I can get the program to send the print command and maintain status of documents. The problem is I don't know how to mimic/send a dummy print command so the document gets printed. If I use Sleep() there is a delay in the whole program.while I want printing on backhand and others users to have access to the program.
My professor assign me a task to create a manual printer settings, not necessary same as printer setting the important thing to do is to have a combobox. In the combobox that you will see the available installed printers, and one command for print that if going to select one available printer in the combobox. It is possible ?
From my understand the cast (reg8 *) applies to the result of the bitwise OR. But what is the left most asterisk doing?Is it just dereferencing the casted pointer?
I am creating and implementing a left and a right rotation to balance a bst into an avl tree. I have made and tried 5 different codes that are commented in the functions left_rotate() and right_rotate() but none have run correctly. Sometimes the program works, sometimes there is a segmentation fault and sometimes not all inserted numbers are shown.
avl.c
Code: #include<stdio.h>#include<stdlib.h> #include<time.h> #include "avl.h" #define N 10 void swap(int *a, int *b){
I want to send control codes for Epson printer with c# application, I wrote some code, I have the connection with the printer, but when I am sending codes it not responding. On the other side, I found Java application for sending control codes, from that app some of the codes is working but not all of them. For example I want to use ESC EM 66 control code but when I am sending this code, printer not responding or just print the code in numbers.
The code who I use is:
class Program { public const short FILE_ATTRIBUTE_NORMAL = 0x80; public const short INVALID_HANDLE_VALUE = -1;
[Code]....
When I am using the method GetDocument() printer is not responding, but it prints only text when I call the buffer variable:
I have a board where a character is. I need to ask the user whether they want to move it up, down, left right. They are allowed to enter 3 move per turn. like up, up, left. How do I do this?
#include <iostream> #include <cstdlib> #include <ctime> using namespace std;
Having trouble getting my square to move to the left my code and instructions of what i am suppose to do is below. No sure how to move my square or if I am even going in the right direction as to writing code to do so. Note that it is only part of my code ( part 2 of project)
Part 2:
Write a graphical application that draws a square and then moves it.
Get the x and y coordinates for the top left corner of the square from the user using the get_int() member function of cwin. Get the length of a side of the square from the user using get_int() as well. Now draw the square to cwin according to the user input.Ask the user how many units to the left they want to move it using get_int() again. Then move the square, clear the screen, and draw it again.
// Part 2 // /* command output to declare the x,y value and 1 side length of a square through user interaction( Has user input intergers) */ int x_value = cwin.get_int("What is the x_value of the top left of the square?"); int y_value = cwin.get_int("What is the y_value of the top left of the square?"); int side_length = cwin.get_int("Input the length for one side of the square:"); /* Data type for the 4 corners of the square */ Point e; Point f;
I am trying to print a barcode form HClabel printer through my application running on Windows server 2008. The printer is a ntwork printer connected to a Windows 7 Machine.
The code to access the printer and proceed with printing is in VC++. The code has been working fine since years and it still works when I try to print from Windows XP machine(Connect and print on the same printer connected to WIndows 7 machine mentioned above).
The error code I receive when tried to print from windows server 2008 is 2 which says File not found. But when i access the machine from windows server 2008, it is accessible.
I'm trying to print Chinese/unicode characters to a line printer(EPSON LQ-2090) using the writePrinter method in c++.
ANSI characters print fine, but when I throw the buffer of widechar Chinese characters at it, they come out like garbage/ANSI chars.
while debuging string shows chinese characters but in memory it shows ANSI characters not chinese and these ANSI characters are get printed on printer.
Note that if I change the DocInfo datatype parameter to "TEXT" instead of "RAW" then also the Chinese characters donot print.
Is there a way to get Chinese or unicode characters to print correctly?
This works, if just loops through till it doesn't find a space or tab than counts the index at that point then uses substr to get rid of any spaces/tabs, it's a small function and uses a goto. how to do it?
Code: string trimLeft(string lineOfCodeToTrim){ string l = lineOfCodeToTrim; int k =0; for(UINT i = 0;i<l.length();i++){
I am having problems compiling this program. line 29 causes the error "left operand must be l-value".
// chap5proj.cpp : Defines the entry point for the console application. // # include <stdafx.h> # include <iostream> using namespace std; int main() { double mph, time, disPerHour, milesTrav;