Visual C++ :: PIC To PC Using MFC Visual Studio Through Serial Communication
May 28, 2014
The project is about reading data from PIC and display the data on the dialogue created by the MFC GUI of Visual studio 2010. There are 4 data need to be displayed (2 weight and 2 angle). the data will be display on the edit control box on the dialogue.
I have try to solve the COMPort and Readdata issues many times, but I'm fail. I have read many sources and implement the source codes... They are never work....
The detail about the issues that I need to solve is clearly mentioned on the main dialogue.cpp. Take a look to an uploaded zip file that I have attached.
View 6 Replies
ADVERTISEMENT
Jan 17, 2013
I wrote a class pedal that allows to search for the serial port on which the pedal is connected. Therefore I send a request to the pedal and set up a timer event of 20 ms. If no reply, I search for the next serial port.
When found I send configuration to the pedal and set another timer event of 200 ms that requests for pedal state. It runs fine.
Now if the pedal is disconnected then connected again I would like it to run again.
Therefore I set another timer event every 2s that launches all what I described above.
The trouble comes because the 20 ms timer event doesn't run and I do not understand why.
View 3 Replies
View Related
Dec 13, 2013
I want to send data from a laptop (windows 7, processor 2.60GHz) to a desktop (windows xp, processor 3.10GHz) using serial communication (using a USB to RS232 convertor). The WriteFile function is able to send the data from the laptop (NumberOfBytesWritten is correct). But on the desktop side, ClearCommError detects no data in the read buffer.
This is the relevant code in my desktop:
while(1) {
ClearCommError(hPort,&dwErrors,&commStatus);
if (commStatus.cbInQue != 0) ReadFile(hPort,&data,1,&dwBytesRead,NULL);
Sleep(10);
}
The if condition is never satisfied. The baudrate and other parameters in the DCB struct are the same on both sides.
The same code works when I write and read in the same system by shorting the RX and TX pins in the RS232 connector.
View 2 Replies
View Related
Dec 18, 2013
I have to communicate between two laptops using USB-to-Serial adapter. I have written 2 programs one for sending and another for receiving. Programs were written in both C and C# programming languages.
Using C language: I am able to successfully communicate using C-Programs mentioned below. But the problem is speed. It takes around 1 hour(60min) for just to pass 150MB. improving the performance of this programs...I also mention some comments along with programs for self understanding.Sender File on laptop with serial port :
Code:
#include <stdio.h>
#include <bios.h>
#include <conio.h>
}
[code]....
The above 4 programs behaves as, sender send a character and receives an ack for every character. I have followed this approach, bcoz other approaches were not working fine (in the sense the complete data is not sent, the amount of data sent is not judgeable, bcoz it will different every tym). when i used this approach it worked fine.
View 6 Replies
View Related
Jun 18, 2013
I sent 1preample and 4bytes in transmitting side , preample contains only 1 and 0 with 4milliseconds delay, each byte contains 8bits with 2milliseconds delay , if a bit contains 1 it will send 1millisecond high and 1millisecond low signal ,and if a bit contains 0 it will send 2millisecond continuous delay, I have a problem at receiving side how to capture and store the preample and 4byte values in a buffer , i am using ARM processor it will update every 5microsecond ..
View 1 Replies
View Related
Nov 30, 2012
How to communicate my COM PORT to my visual c++ ... Means i want to read data from my port and want to show in visual c++ so what to do ...
View 1 Replies
View Related
Jan 24, 2014
I'm trying to set up some basic communication between two programs via the registry.
For this I would like to use the functions
Code:
int value=10;
CString strSection="Data";
CWinApp* pApp = AfxGetApp();
pApp->WriteProfileInt(strSection,ValueName,value);
and
Code:
CString strSection="Data";
CWinApp* pApp = AfxGetApp();
int value=pApp->GetProfileInt(strSection,ValueName,0);
which read/write to the application's registry.
Is there some way of making two different programs use the same application registry?
View 14 Replies
View Related
Aug 15, 2014
I heard that you can't use it with express, but that doesn't seem right... Can you use it with Codeblocks, at least? I just hate the Qt Creator IDE. I don't like the UI... all I want to do is code Qt. I don't care much for the GUI editors.
View 10 Replies
View Related
Jan 4, 2013
I wrote a routine in one C++ file and I decided to break it up into some smaller more manageable C++ files. When I copied the variables out of the first one and into the new smaller file (same solution), everything compiles fine but I get a ton of linker errors saying the variables have already been defined in another (the previous) file. Using Visual Studio 2008.
View 5 Replies
View Related
Mar 26, 2013
Whenever i run this on Visual Studio, it keeps exiting with code 0
Code:
#include "stdafx.h"
#include "stdio.h" // NULL defined here
#include "stdlib.h" // malloc function here
#include <string.h> //for handling strings
#include <ctype.h>
char reg_num[21]; //used in get_new_value
[Code] .....
View 5 Replies
View Related
Jan 24, 2015
How to create/use a graphical interface. Especially since Microsoft has removed Windows Form Application support from Visual Studio 2012 and 2013.
I know that Windows Form Application is still supported with C#, but C# is definitely not an option as the program I am developing is heavily depended on some of C++'s more advanced features not present in C#.
Is there an alternative to Windows Form Application? I would definitely prefer one, as I doubt that some workarounds would work for long. What are common ways to create a GUI application in C++? There certainly must be some ways. In Java one would use something like JFrame.
Crossplattformcompatibility: The program I am creating is a Microsoft Windows program only. So I don't care if it runs on Linux or Mac. It only has to run from Windows 7 onward. So if there are more than one standard ways to create a GUI, I would prefer the one working best for Windows.
By the way, I am using Visual Studio 2013.
View 11 Replies
View Related
Jun 1, 2014
I want to have a multi user chat over TCP/IP. I already have the code for both the server and the client and so far I am able to send messages from the client to the server. Now I want to make it a multi user chat. I am executing the codes using Visual studio's Command prompt(not Windows Command Prompt). I have read somewhere that we have to use select() function.
View 2 Replies
View Related
Apr 3, 2014
im trying to get the row id created when inserting, ive tried ; SCOPE_IDENTITY(), get_last_identity() adding it to the end of my query string but get nothing back, it doesnt even add row to database. ive also tried adding a stored procedure but it doesnt even have the option in adding that when i right click to add it,(i thinks its because im using microsoft Access MySql)
public static Boolean checkoutOrder(string CustomerEmailId) {
DateTime CreatedDate = DateTime.Now;
DateTime ShippedDateDate = DateTime.Now;
string CustomerId = CustomerEmailId;
OleDbConnection myConnection = GetConnection();
[Code] .....
View 5 Replies
View Related
Jan 26, 2014
C-> Visual studio 2010-> windows 7
How to create a directory / folder.( to browse/save my files to a directory.) how to specify the path?
I googled , but i cant able to find appropriate as it is showing all in the C#, C++ , objective C. But not in C.
Here i am writing a sample program to my POS device .problem here is it is not taking mkdir(direct/dir.h header file)function. Any alternative is there to make a directory?
View 1 Replies
View Related
May 28, 2014
is it possible to take integer or char data type on message box to V C++?
View 2 Replies
View Related
Feb 17, 2013
I want to read and write value on serail port to Microcontroller with MFC. The MFC have no serial port tool like in VB Professionnal edition. I try to find MFC connect serial port example but I not found. If you have good example for read and write on serial port with MFC
View 2 Replies
View Related
Jun 13, 2014
I stumbled upon an unexpected difference between GCC and VisualStudio: Different overloaded functions are called in the following example:
// -------- can assume this is located in 'tool.h' file --------------
// Fwd declaration support foo( const int& ) gets called as expected by both compilers
// void foo( const int& n );
template< typename T >
void foo( const T& n ) {
[Code] ....
What happens: I expected that by calling bar(1) compiler will notice both versions of foo() and call the best match, in this case foo(const int&). That is not the case.
Note that overloaded foo(const int&) is below bar(). It seems that at that point GCC does not see overloaded version, and happily calls template version. Visual studio on the other hand has no problem finding them both.
If I introduce a forward declaration of foo( const int& ) before bar(), both compilers call that version correctly. Unfortunately, that is not a solution for my problem here.
Template version is part of a library while overloaded is part of the user code. Both would be located in different (header) files and I would not like to impose #include order to the users or to be dependant on it.
View 2 Replies
View Related
Apr 10, 2013
So I am using Visual Studio 2012 Professional, this is C++ code. I am just trying to get the remainder from a very simple division. Nothing difficult, heres the code:
double getProbability(){
int rd = random();
int max = numeric_limits<int>::max();
double result = rd % max;
cout << "Probability: " << result << "
";
return result;
}
When I look at the values in debug I get:
max 2147483647
rd 1804289383
result 1804289383.0000000
That is completely wrong. The answer should be 0.840188. What is going on here?
random() just returns a number from a vector that was prepopulated with "random" integers. Not really random, but that isn't all that important. What is important is why on earth is a % operation returning such a huge number. I assigned the values to variables so I could look at them in the debugger. I know I am going to probably get a thousand different ways that I could do this "better" but again, that isn't what I am looking for. I would just like to know why the % operation is doing what it is doing?
View 9 Replies
View Related
Mar 18, 2014
I have a project that is essentially a hot pot of C/asm (naked functions etc). The code gets injected into another EXE. It works fine when compiled in Visual C++ 6 but when compiled in Visual Studio 2008 it compiles fine but falls over in use.
Are there certain settings I need to look out for? I have optimization disabled and as far as I can tell the command line options for compiler/linker are the same (given the differences).
I have opened both builds in IDA and the 2008 build has more import and offset jumps are in different places.
View 1 Replies
View Related
Feb 6, 2015
I downloaded Visual Studio 2013 on a new laptop. On my old one I could press things like ctrl + F7 to compile and ctrl + F5 to start without debugging however now it isn't responding when I type those commands. Nothing happens at all. How to change this? I googled "keyboard shortcuts not working in Visual Studio 2013" but per the usual Google comes up with garbage search results that do not pertain at all.
View 1 Replies
View Related
Jul 3, 2013
looking for a simple LED type control for Visual Studio 2008. I just need a control that I can add to the toolbox where I can pass a parameter to define the colour. This is an MFC based application. how to add a new control to the toolbox. I have been programming in 'C' for many years but find some of the IDE's confusing as to how to do things (as above)
View 4 Replies
View Related
Feb 27, 2015
I believe I set up everything correctly. I linked the library folder, the includes, and included the libraries needed. It still comes up with an error that it can't find the functions or something like that.
The error:
Do I need to include the DLL some way? I tried adding it to the build directory and the EXE directory, but it did not work. My code is just a small test.
#include <GLFW/glfw3.h>
#include <cstdio>
#include <cstdlib>
int main() {
if (glfwInit() == false) {
[Code] ....
View 6 Replies
View Related
Feb 1, 2013
How to show only current date not time in webforms in visual studio as for date and time code is
Label1.Text = DateTime.Now.ToString();
What for only date not time
View 3 Replies
View Related
Jun 10, 2013
I've been trying to make a little quiz application that takes questions from a file and them presents question by question on a static pannel, a few buttons that have the possible answers on them written as the questions go, and on the bottom a little place where we can see whats our score.when we finish the quiz, the score gets writen in a data.dat file and thats that.
View 14 Replies
View Related
May 10, 2014
I am making a MFC application with VC++2012 with receiving data from Serial Port and the data is stored in a Listbox, then after processing (convert into numbers) and get these data to draw a sine wave on the chart. (I intend to make a virtual oscilloscope).
Everything works ok at the beginning, but after receiving about 300 items or above (in the Listbox) the value seem stucking (or lagging) and work very slowly.
I receive data by the SerialPort_DataReceived() method, and process of converting and drawing chart also in this method, I think this makes the system overload!!
View 1 Replies
View Related
Feb 11, 2013
i am using visual studio 2010 for my work. Which header file contains the mmap and munmap functions? i am trying to map a file into the memory.
View 1 Replies
View Related
