Visual C++ :: Serial Communication In Windows - ClearCommError Finds No Data In Read Buffer
Dec 13, 2013
I want to send data from a laptop (windows 7, processor 2.60GHz) to a desktop (windows xp, processor 3.10GHz) using serial communication (using a USB to RS232 convertor). The WriteFile function is able to send the data from the laptop (NumberOfBytesWritten is correct). But on the desktop side, ClearCommError detects no data in the read buffer.
This is the relevant code in my desktop:
while(1) {
ClearCommError(hPort,&dwErrors,&commStatus);
if (commStatus.cbInQue != 0) ReadFile(hPort,&data,1,&dwBytesRead,NULL);
Sleep(10);
}
The if condition is never satisfied. The baudrate and other parameters in the DCB struct are the same on both sides.
The same code works when I write and read in the same system by shorting the RX and TX pins in the RS232 connector.
View 2 Replies
ADVERTISEMENT
Jun 18, 2013
I sent 1preample and 4bytes in transmitting side , preample contains only 1 and 0 with 4milliseconds delay, each byte contains 8bits with 2milliseconds delay , if a bit contains 1 it will send 1millisecond high and 1millisecond low signal ,and if a bit contains 0 it will send 2millisecond continuous delay, I have a problem at receiving side how to capture and store the preample and 4byte values in a buffer , i am using ARM processor it will update every 5microsecond ..
View 1 Replies
View Related
Jan 17, 2013
I wrote a class pedal that allows to search for the serial port on which the pedal is connected. Therefore I send a request to the pedal and set up a timer event of 20 ms. If no reply, I search for the next serial port.
When found I send configuration to the pedal and set another timer event of 200 ms that requests for pedal state. It runs fine.
Now if the pedal is disconnected then connected again I would like it to run again.
Therefore I set another timer event every 2s that launches all what I described above.
The trouble comes because the 20 ms timer event doesn't run and I do not understand why.
View 3 Replies
View Related
May 28, 2014
The project is about reading data from PIC and display the data on the dialogue created by the MFC GUI of Visual studio 2010. There are 4 data need to be displayed (2 weight and 2 angle). the data will be display on the edit control box on the dialogue.
I have try to solve the COMPort and Readdata issues many times, but I'm fail. I have read many sources and implement the source codes... They are never work....
The detail about the issues that I need to solve is clearly mentioned on the main dialogue.cpp. Take a look to an uploaded zip file that I have attached.
View 6 Replies
View Related
Dec 18, 2013
I have to communicate between two laptops using USB-to-Serial adapter. I have written 2 programs one for sending and another for receiving. Programs were written in both C and C# programming languages.
Using C language: I am able to successfully communicate using C-Programs mentioned below. But the problem is speed. It takes around 1 hour(60min) for just to pass 150MB. improving the performance of this programs...I also mention some comments along with programs for self understanding.Sender File on laptop with serial port :
Code:
#include <stdio.h>
#include <bios.h>
#include <conio.h>
}
[code]....
The above 4 programs behaves as, sender send a character and receives an ack for every character. I have followed this approach, bcoz other approaches were not working fine (in the sense the complete data is not sent, the amount of data sent is not judgeable, bcoz it will different every tym). when i used this approach it worked fine.
View 6 Replies
View Related
Oct 25, 2013
I am developing a VC++ application with windows media player component. play video from a video buffer data which i have?
View 2 Replies
View Related
Feb 17, 2013
I want to read and write value on serail port to Microcontroller with MFC. The MFC have no serial port tool like in VB Professionnal edition. I try to find MFC connect serial port example but I not found. If you have good example for read and write on serial port with MFC
View 2 Replies
View Related
May 10, 2014
I am making a MFC application with VC++2012 with receiving data from Serial Port and the data is stored in a Listbox, then after processing (convert into numbers) and get these data to draw a sine wave on the chart. (I intend to make a virtual oscilloscope).
Everything works ok at the beginning, but after receiving about 300 items or above (in the Listbox) the value seem stucking (or lagging) and work very slowly.
I receive data by the SerialPort_DataReceived() method, and process of converting and drawing chart also in this method, I think this makes the system overload!!
View 1 Replies
View Related
Nov 19, 2012
Got buffer with raw data. How to display it in MFC dialog and refresh it?
View 3 Replies
View Related
Jun 27, 2014
I'm reading strings one after another and trying to split it using strtok_r. This doesnot seem to be working
I have a .gz file from which I'm reading the data into the buffer in chunks.
The below code works fine only for the first chunk on data. Later it just breaks out.
while(1) {
char buffer[SIZE];
int bytes_read = gzread (f, buffer, SIZE - 1);
[Code] .....
View 3 Replies
View Related
Dec 19, 2012
I need make a CBitmap or a streamdata from a System.Windows.Controls::Image(rendered out put)in a SDI mfc application (supporting clr). Here is my codes:
Code:
using namespace System;
using namespace System::IO;
using namespace System::Collections::Generic;
using namespace System::Windows;
using namespace System::Windows::Controls;
[Code] .....
By this codes i can read datastream from bitmapSource but in this way somthing goes wrong in most of GIF animations. After debug i found out i need 3 more things too decode a gif animation - (x,y) position and size of each frame and disposal method for each one - finally i just found a way to draw tru images on a form window by this codes:
Code:
System::Windows::Window^ mainWindow;
mainWindow = gcnew System::Windows::Window();
mainWindow->Title = "GIF Imaging Sample";
//ScrollViewer^ mySV = gcnew ScrollViewer();
array<System::Byte>^ pixels = gcnew array<System::Byte>(bitmapSource->PixelHeight * Stride);
[Code] ...
When i change
Code: bitmapSource = decoder->Frames[0];
to
Code: bitmapSource = decoder->Frames[01];
frame[1] has drawn perfectly on window(i think some how Image class takes care about - (x,y) position and size of each frame and disposal method for each one ),so im wonder if how can i make a CBitmap or a data stream from System.Windows.Controls::Image class to use in mfc app.
View 2 Replies
View Related
Aug 19, 2014
I want to write my own application which would fetch some data from a web site. I need to parse the HTML code of the web site and get the data.
About the application:A form (main form) that will contain data arranged in rows. Some of the data comes from a web site and some of it comes from a database.The data that comes from the web site needs to be updated every few seconds so I need to keep fetching the data from the web site.The main form will contain a button "add" which when clicked will add a new row. New data can be added to this row by the user.
I am not sure what to use for this. I have been writing the application as a Windows Form Application (Visual C#) but I do not know whether this is the best choice. Should it be a windows form application or web application? Should I use something else?
View 6 Replies
View Related
Oct 18, 2014
I read correctly in MatLab some data by serial port of a device, but in C... nothing.
Code: #include <cstdlib>
#include <stdio.h>
int main(void)
{
FILE *in;
char linha[30];
while(1)
{
// Abrir porta COM de onde se ligou a placa
in = fopen( "COM8", "r" );
if( in == NULL )
{
[code].....
The message "ERRO: no consigo abrir porta COM " don't appear, so I haven't error there. I just do not see anything in the terminal.
View 3 Replies
View Related
Jun 2, 2014
I want to read a file who contain a serial of number like in this example : +200,-100,+400,+200,-200 and the sign is very important for the rest of the program so i should save those signed numbers in an array or a struct that i can define with a boolen variable if it's + i give it 1 else if it's - it'll be 0
I wrote a basic file's code reader but i don't think there is a solution on it
Code:
void read_file(char *fil1){
FILE *f;
int ch[500];
f=fopen(fil1,"rt");
if(f==NULL)
[Code] .....
View 1 Replies
View Related
Apr 14, 2014
I am using libserial library to communicate through the serial port in c++. the linux cpu is communicating with a modem through the serial port. basically this is what i want to do
Code:
//I want:
cpu to write command_1 to modem
Wait for the answer from modem
read serial port
check if command successful (i.e modem sends OK if successful and ERROR if there is an error)
If there is an error, resend command_1
if successful then Write command_2 to modem Wait for answer read again serial port check if command is succesful (modem again sends OK if successful and ERROR if there is an error) basically, this is the code...
Code:
serial_port <<command_1 <<'
'; //send 1st command
sleep(2); //delay a while
[Code].....
View 6 Replies
View Related
Jun 27, 2014
I am doing SerialPort communication program where i am opening the port and reading data from port and storing in one document.
I debug my program and check that my read function is reading the data properly but when checking the document i find only unicode.
Suppose I am sending 1,2,3,4 to port i able to read same but my document showes þÿÿ þÿÿ þÿÿ þÿÿ
//My Read Function which read data from serial port
tInt serialport::Read(tVoid* pvBuffer, tInt nBufferSize) {
tInt nBytesRead = 0;
[Code] ....
Why I am getting unicode instead of 1,2,3,4 in my document ....
View 3 Replies
View Related
Dec 29, 2013
Explain me a working code to read and write a file using serial communication.and i need to store that file.I know normal file handling in C, but how it is through serial port i am not getting.
View 1 Replies
View Related
Jun 2, 2010
How can i read barcode scanner value from serial port?
View 5 Replies
View Related
Nov 30, 2012
How to communicate my COM PORT to my visual c++ ... Means i want to read data from my port and want to show in visual c++ so what to do ...
View 1 Replies
View Related
Jan 24, 2014
I'm trying to set up some basic communication between two programs via the registry.
For this I would like to use the functions
Code:
int value=10;
CString strSection="Data";
CWinApp* pApp = AfxGetApp();
pApp->WriteProfileInt(strSection,ValueName,value);
and
Code:
CString strSection="Data";
CWinApp* pApp = AfxGetApp();
int value=pApp->GetProfileInt(strSection,ValueName,0);
which read/write to the application's registry.
Is there some way of making two different programs use the same application registry?
View 14 Replies
View Related
Jun 27, 2014
I am using libserial library to interact with a modem using c++. The C++ code sends an AT command:
Code:
my_serial_stream << "AT+CSQ" << '
' ;
The modem responds with a response, either ERROR or OK, The c++ code to read the response:
Code:
while( serial_port.rdbuf()->in_avail() > 0 )
{
char next_byte;
serial_port.get(next_byte);
std::cerr << std::hex << (int)next_byte << " ";
}
std::cerr << std::endl;
I would like to handle the response such that if the response is OK, the modem sends another command and if the response is ERROR, the modem resends the first command.
View 1 Replies
View Related
Jan 19, 2015
I am trying to make a project using arduino to control several power surces by time, i don't want to have an lcd, that would be easyer but i don't have enought space on my project, i want to set the time and the timing for the relays via Serial
Of curse i could set it using the serial monitor on the arduino ide, but i want to make a simple program to make the pc comunicate with the arduino and make it simpler to set the time and similar stuff. How to use one of my usb ports to print and read serial data?
View 1 Replies
View Related
Aug 13, 2014
private void button1_Click(object sender, EventArgs e) {
serialPort1.PortName = "COM1";
serialPort1.BaudRate = 9600;
serialPort1.DataBits = 8;
serialPort1.Parity = Parity.None;
serialPort1.StopBits = StopBits.One;
[Code]...
In my project i have a serialport control and a button, there is no error but i want to know how actually this works, i want to send and recieve the data from the serial port don't know how to do it..
View 9 Replies
View Related
Jan 20, 2014
I have a C program. Within it, I would like to embed either a file or a pre-assigned variable. I would prefer a method that is platform independent.
I am using the data type "RSA" from <openssl/rsa.h>. I have a key file in PEM format, but I would like to embed an RSA object in the program instead. I tried creating a char array and then casting the pointer, but that caused some sort of illegal casting issue. I tried using memcpy but I haven't been able to get it working that way. What is the best way of going about this? Is it possible to read a file directly from a memory buffer?
View 1 Replies
View Related
Mar 8, 2014
i have problem i make code that take data from serial com port for weighting machine it is ok working but it recieve data in more lines.I try to make it receive data in one line In code below i need to take weight fro weight bridge machine automatically by timer in visual studio 2005.it works but receive weight values in more lines. I need to receive weight in one line and automatically updated then convert t to integer
void Application_Idle(object sender, EventArgs e)
{
label3.Text = serialPort1.IsOpen ? "[Open]" : "[Closed]";
}
[Code].....
View 3 Replies
View Related
May 22, 2014
I want to setup my MFC-based dialogue "IDD_LOADCELL" with serial communication so that when that dialogue is pop up, the data from PIC (external device) which is in hex file format is display on the edit control box on the dialogue. The variable name of the edit control box is "m_loadP "and "m_loadT1". type of variable for both are string. I want to get the code for the COMPort setting and reading the data from pic and finally display it on the edit control box created on the dialogue.
View 11 Replies
View Related
