Visual C++ :: MySQL Connector Data Dump?
Jul 31, 2013
I wrote an application so I can manage the products for my e-commerce site. It uses MySQL 64 bit. Problem is some of my stores have in excess of 3 million products. The files that contain the data are all CSV. I parse the lines... format the data... write to table. On most of the stores which contain 10 - 60 thousand products it only takes max 3 min to write it all in. I have been running it on this one store for 6 hours now and it has barely made a dent. I know there are almost 3mil products in this one but it should be going much faster given what the speed was for the 60K stores. Is there a faster approach to handling a massive dump like this? I should also add that there are quite a few indexes. These indexes are there for ordering and fulltext search once the products have been activated on the site. I cannot create the table without the indexes and add them later since there is already preexisting data that is using the indexes.
View 2 Replies
ADVERTISEMENT
Jul 1, 2014
So even though I have so many issues with linking libraries, I apparently became the go-to person for a fellow college friend of mine for a sql library. He's using the mysql connector/c++ and his team has had quite a few issues getting it set up. I've solved two out of three issues:
1st issue I solved was that they didn't know how to build boost, I just linked it and they were good to go.
2nd issue I solved was that they were missing libmysql.lib, I just installed the mysql server onto their computer and linked that up. 3rd issue is where I am now stumped at, as they get a compile error: LNK2001 unresolved external symbol: _get_driver_instance().
View 6 Replies
View Related
Apr 9, 2014
I'm writing a code using least mean square to fit a sample of data. The code is running till an iteration where it crashes and returns a segmentation fault core dumped
(the memory used is always closed to 2g mem=1805804kb,vmem=1926132kb, seems like the code can't go beyond) .
But If i try to fit at this last iteration the code works perfectly, so i think that I'm not trying to access a variable at a wrong index but it might be dynamic memory allocation ( a pointer to a matrix that I didn't free or something like that). The code is complex and calls too many routines, I'm combining cimg , c++ and old c. How can I track this error?
View 19 Replies
View Related
Feb 6, 2014
I used to use OutputDebugString, and not using it now because it only allows to strings to be outputted, are there any methods that I can dump virtually anything to the console?
cout << thing << endl;
But what if I am not start running the program from the command prompt?
View 2 Replies
View Related
Jan 17, 2013
i am student working on a project in c# to maintain the datas from a solar battery monitoring.i already imported the datas from the battery monnitoring and saved them in mysql database and retrived the data in c#.
i have problem in retriving the data in accordance with the date and time range selection.
what i am trying to do is there are more than 1000 datas in the table if i select two date and time the datas in the table should cross check these dates and show all the datas in the table in between those date&time
View 3 Replies
View Related
Dec 2, 2013
I was created the mysql database in my Pc. This database connecting with vc++ code Using MySQL C++ Connection Example in Visual Studio. I done this work in single PC. It's working good. i viewed the table values using vc++ application.
But now want to connecting the database through lan connection. I refered the below link but i'm not clear.Step # 5 Grant access to remote IP address
For your reference, (I installed)
PC1 - visual studio 2003, mysql 5.6 for win32 & mysql connector (Ver : mysql-connector-c++-1.0.5-win32), OS : XP SP2, IP : 192.168.100.123
PC2 - mysql 5.6, OS: XP SP3, IP: 192,168,100.9
Table created in PC2, database name "test". server = 'localhost', user = 'root', passwd = "".
I like to connect PC1 & PC2 through Lan & access the table using vc++ code.
How can i view PC2's database table values in PC1?
View 11 Replies
View Related
Apr 3, 2014
im trying to get the row id created when inserting, ive tried ; SCOPE_IDENTITY(), get_last_identity() adding it to the end of my query string but get nothing back, it doesnt even add row to database. ive also tried adding a stored procedure but it doesnt even have the option in adding that when i right click to add it,(i thinks its because im using microsoft Access MySql)
public static Boolean checkoutOrder(string CustomerEmailId) {
DateTime CreatedDate = DateTime.Now;
DateTime ShippedDateDate = DateTime.Now;
string CustomerId = CustomerEmailId;
OleDbConnection myConnection = GetConnection();
[Code] .....
View 5 Replies
View Related
May 20, 2014
I'm using VS 2012. Installed MYSQL 5.6, C++ Connector 1.1.3. Created a sample table using mysql. Now i like to create a connect between mysql and MFC dialog. Using this, i was try to connect.
Server Explorer -> Data Connection -> Add Connections ->MYSQL Database -> Addconnection
To get the connection, i want to enter the connection settings like:
server host name = localhost, user name =root, password=
If I pressed any letter in the keyboard means add connection dialog was closed automatically.
How to connect mysql(localhost) with MFC Dialog?
View 14 Replies
View Related
Nov 13, 2014
How can i read particular record in a table quickly via VC++ from MYSQL?
I have a table like
Code:
Database name: test & Table name : Profilemaster
+-----+--------+
| PID | PNAME |
+-----+--------+
| 1 | APPLE1 |
| 2 | APPLE2 |
| 3 | APPLE3 |
| 4 | APPLE4 |
| 5 | APPLE5 |
+-----+--------+
My code is here, I was read all profilename from MYSQL database and load it to a combobox.
How can i read a particular record and store it to combobox?
Code:
void MainScreen::OnreadProfileName() {
// TODO: Add your control notification handler code here
CDatabase database;
CString SqlString;
CString sDsn;
CString pname;
[code].....
How can i execute this query and get the following result
SqlString = "SELECT PNAME FROM PROFILEMASTER WHERE PID =1;";
Code:
+-----+--------+
| PID | PNAME |
+-----+--------+
| 1 | APPLE1 |
+-----+--------+
View 4 Replies
View Related
Mar 25, 2013
I have a C# .NET Application which get data from QuickBooks via the ODBC Driver and save the result to C# data table. So, I want to transfer this data table to a mysql table on my own server. That's the code I use:
using System.IO;
using MySql.Data.MySqlClient;
//Add mysql dll on the .NET Tab in Project's references
string connStr = "DSN=QBTest;";
string myServerAddress = "192.168.0.243";
string myDataBase = "CostTest";
[Code] ....
View 2 Replies
View Related
Oct 15, 2014
I got the core dump file so I know exactly which line it crashes. Below are some of the information:
OS: Red Hat Enterprise 5.8
Example snippets of when the crash happen:
Code:
typedef map<int, MyClassObj> MyMapT;
.
.
void someFunction( MyMapT& inMap )
{
for ( MyMapT::iterator iter=inMap.begin(); iter!=inMap.end(); ++iter )
{
.
.
}
}
Using GDB, I am able to find out that it crashes at the "++iter" as the .h file indicate it was a "++" operation for the iterator. Tracing up the stack frame it indicate it crash during the copy constructor of some "__rb_tree_node". I did some Googling and it seems that is some Red-Black tree implementation for the map. Honestly I do not quite understand the Red-Black tree and I believe STL map is a very very well tested container, so the problem must lie in my code so that I can look out for it.
View 14 Replies
View Related
May 19, 2013
I'va got a segmentation problem with creation of core dump for the following snippet of c code:
Code:
#include
#include
#include
"lezione.h" studente s1, s2; studenti s;
int main()
{ int codice; char* nome; char* cognome; int esami;
printf("Leggi uno studente da tastiera e memorizzalo in una struct
");
lettura_studente(s1, codice, nome, cognome, esami); return 0;
}
[code]....
In conclusion I'va two problems:
1) Program crash;
2) I can't read struct studente within parameter function. What are the problems?
View 4 Replies
View Related
Jul 2, 2014
I need to do an equivalent of kill -11 <pid>(which is in unix) in windows.
I need to crash a process with SEGV so that it would dump core in windows. Is there any tool by which we can do this . Also is there any sample code through which we can achieve this .
In windows we have taskill which only terminates a process , but is unable to send a signal like SEGV to the process upon which it would terminate and dump core .
View 9 Replies
View Related
Jan 11, 2014
I'm reading from a file the middle column of data (Volts) where my test file "AP.txt" is opened by my program. Here is a segment of the data:
time Volts dV
49552 -66.20183 -0.01556807
49553 -67.76025 -0.01556495
49554 -69.30704 -0.01533247
49555 -70.81799 -0.0148486
49556 -72.26774 -0.0141133
49557 -73.63226 -0.01315276
49558 -74.89141 -0.01201764
Since the calculation I performed gives me -71.77 Volts, I need to match this value to the time that this occurs closest to using my program, and output the time that this occurs at.
Here is my program so far:
int main()
{
std::ifstream inFile;
inFile.open("AP.txt");
ofstream results_file ("maxvaluewithinput.txt");
float TimeAtdVMax = 0;
float VoltsAtdVmax = 0;
[Code]...
If you're curious, this program isn't for homework. It's part of the independent learning on C++ I'm doing for a Master's Thesis; the program will eventually model the APD90 of a ventricular action potential.
View 10 Replies
View Related
Feb 6, 2014
I am wanting to be able to add as many different instances of data, while the user has not stated 'n', but then it only ever writes back to the screen the input for the last set of data. Where as I want to display back to the screen all the data that has been entered.
Code:
#include <iostream>
#include <string>
/*Function Declaration*/
void createItem();
void returnItem();
//Items structure
[code]...
View 6 Replies
View Related
Feb 5, 2014
I need to find a string(&login=) from physical memory dump file.And i have to print the word or string following it.Is there any C# code for this problem?
View 3 Replies
View Related
Mar 26, 2013
I have so far tried MySQL++, ODBC, SimpleDB, and the MySQL C++ Connector. All of them give me a FLOOD of errors in the output. Is there an easy way to connect?
View 7 Replies
View Related
Nov 26, 2013
I created a .h file for mysql connections. In my example file, I created an array of my class and made connection with the database for each subscript of the class object one by one. Then I checked if the connection in the previous subscripts are active or not, I found all the previous connection are disconnected.
I want to establish multiple connection with database at a time.
View 1 Replies
View Related
Jul 30, 2014
The resultset is always null and the connection is alive. The VS2013 debugger says that mysqlcppconn.dll has no debugging symbols. Tested the query on a mysql console and it worked fine, it returned 1.
CDatabase::CDatabase(CSettings* settings) {
settings = settings;
try {
Connection* con = get_driver_instance()->connect("", "", "");
con->setSchema("hyperbot");
cout << "Connected." << endl << endl;
[Code] .....
I also get these strange warnings on compile:
1>c:program files (x86)mysqlmysql connector c++ 1.1.3includecppconnsqlstring.h(38):
warning C4251: 'sql::SQLString::realStr' : class 'std::basic_string<char,std::char_traits<char>,std::allocator<char>>'
needs to have dll-interface to be used by clients of class 'sql::SQLString'
[Code] ......
View 10 Replies
View Related
Jun 6, 2014
I am trying to write a C code with embedded MySQL with server and client options. I am trying to important a csv data file for MySQL server and client.
I saw on internet like: LOAD DATA LOCAL INFILE 'data.csv' INTO TABLE test FIELDS TERMINATED BY',' LINES TERMINTED BY' ';
But I think that line is for SQL workspace. How to write in C format?
Code:
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include "/usr/include/mysql/mysql.h"
MYSQL *mysql;
MYSQL_RES *results;
MYSQL_ROW record;
static char *server_options[] = { "data.csv", "--defaults-file=my.cnf" };
int num_elements = sizeof(server_options)/ sizeof(char *);
[Code] ......
View 3 Replies
View Related
Feb 5, 2015
I don't understand when I'm only requesting a specific column on a unique row in MySQL that I'm being returned with data from all columns of that row.
My Select Statement - "select article from post where idpost=" + strIDpost + ";"
I should get:
|--- article -----|
"some article text"
Instead I get:
|-idpost-|-title-|---- article------|
1 title some article text
If I run the command directly to the database I get the results I'm looking for, but somehow while running the application, the program is managing to pull the entire row.
I'm using C# on a webform in Visual Studio '13. Here's my Code:
public static string GetConnectionString() {
string connStr = String.Format("server={0};user id={1}; password={2};" +
"database=dbname; pooling=false", "servername",
"dbUserID", "dbPassword");
[Code] .....
View 7 Replies
View Related
May 8, 2014
Basically I have a few tables in my Database.
So I have one table that is like so:
Item_ID, Name, Parent ID.
1 , jeff , 5
and another table like this:
Parent_ID, parent_Name
5,jackson
What I would like to happen, when I run my code is that I'll get the following
Item_ID, Name, parent_Name
1 , jeff , jackson
DataSet DS = new DataSet();
if (this.OpenConnection() == true) {
mySqlDataAdapter = new MySqlDataAdapter("select Item_ID, NAME, Parent_ID from table1, table2", connection);
mySqlDataAdapter.Fill(DS);
dataGridView1.DataSource = DS.Tables[0];
//close connection
this.CloseConnection();
}
So this spit out parent ID = 5.
I've not worked with Dataset before and I was just wondering what is the best approach? Can this be done via a SQL command or will I have to replace the value(5) with the string(jackson) using a large IF loop to search and replace.
View 1 Replies
View Related
Jul 10, 2014
I am currently developing a sync module using asp.net. I am getting data from an external database (mysql database) The problem is I am getting the error "Connection unexpectedly terminated" when filling the dataset.
Here's my code
string P_contact = "SELECT A.id, B.firstname, B.middlename, B.lastname FROM Accounts A, Contacts B WHERE A.id = B.id";
MySqlDataAdapter db_P_contact = new MySqlDataAdapter(P_contact, conn);
DataSet ds3 = new DataSet();
DataTable dt3 = new DataTable();
[Code] ....
I am getting the exception on this line of code:
db_P_contact.Fill(ds3, "P_contact");
View 3 Replies
View Related
Feb 26, 2014
i wanted to insert Decimal Values in MySQL database, but decimal values has precision and in C# there is not option to specify precision point, the last column is size which is integer.
MySqlParameter MySqlParameterCollection.Add(string parameter Name,MySqlDBTYPE dbType,int size);
Here my Code and i get error on last Line
MySqlCommand insert = new MySqlCommand("Insert into
Plan(Plan_ID,Plan_Title,Plan_rate,Plan_Length)
values(@p_id,@p_t,@p_r,@p_l);", con);
insert.Parameters.Add("@p_id", MySqlDbType.VarChar, 10).Value = p.p_id;
insert.Parameters.Add("@p_t", MySqlDbType.VarChar, 45).Value = p.p_title;
insert.Parameters.Add("@p_r", MySqlDbType.Decimal,10,2)=p.p_rate;
View 7 Replies
View Related
May 15, 2014
I just got this new project from my employer. He asked me to create a desktop application that could remotely access our sites database in cPanel.
View 4 Replies
View Related
Aug 18, 2012
I was looking at this code:
private void button1_Click(object sender, EventArgs e)
{
string input = textBox3.Text;
[Code].....
And how to rewrite the code so that it display the MySQL table data for a specific user I already have a string called username and that stores the username entered on the login form. I want the code to use the username string to search for the name and display that users info.
My table contents are: username
First name
Last name
Position
Employee Id
Airline
View 7 Replies
View Related
