C++ :: Taking Data From Files And Output Information To Another File
Apr 2, 2014
Whenever I run my program, It should be taking this string of information:
Shampoo 10 8.75 87.50
Pen 3 2.50 7.50
Headphones 5 20.99 104.95
MacAir 1 879.23 879.23
Raspberries 6 4.99 29.94
Oranges 5 2.79 13.95
Apples 3 3.85 11.55
From one file and outputting it to another, the finished product should look like:
Shampoo 10 8.75 87.50
Pen 3 2.50 7.50
Headphones 5 20.99 104.95
MacAir 1 879.23 879.23
cheapest item = Pen
most expensive item = MacAir
total cost = 1079.18
shopper = Mary Kay
Raspberries 6 4.99 29.94
Oranges 5 2.79 13.95
Apples 3 3.85 11.55
cheapest item = Oranges
most expensive item = Raspberries
total cost = 55.44
shopper = Winnie B. The Pooh
When I run my code however, it doesn't get past shampoo and will continue to add shampoo to the total cost infinitely. How can I change the code to produce the proper information?
CODE:
#include <iostream>
#include <fstream>
#include <iomanip>
#include <float.h>
#include <sstream>
#include <string>
using namespace std;
ifstream input_file;
ofstream output_file;
[Code] ....
View 1 Replies
ADVERTISEMENT
Nov 23, 2013
I created a simple program that writes some text to two different text files. how to create a program that would retrieve the information from those two files, and put them in a single file, first the content of input1 and then the content of input2. how to do this. Here is the program that I created that creates the two files.
#include <iostream>
#include <fstream>
#include <string>
int main() {
using namespace std;
string input1;
ofstream fout("input1.txt");
[Code]...
View 3 Replies
View Related
May 6, 2013
my program wont output any information to the text file that I have specified it just creates it but it leaves it blank
#include <iostream>
#include<string>
#include<iomanip>
#include <fstream>
using namespace std;
class Carloan
[code]....
View 2 Replies
View Related
Apr 20, 2015
Create a simple data file like the example shown below containing the 4 dates below plus 10 or more additional dates. The file should include 1 date per line and each date should have the form MonthNumber-DayOfTheMonth-Last2DigitsOfTheYear with no extra spaces. All dates should be in this century. No error checking for invalid dates is necessary.
My Output displays like
February -19,1991
How do I get my program to ignore the dash between the dates?
#include <fstream>
#include <iostream>
#include <string>
#include <cmath>
using namespace std;
int main(){
const int M = 13;
[code]....
View 1 Replies
View Related
Mar 31, 2014
For my intro to c programming class, our homework requires us to read a data file and emit various bits of information. the data file looks like this
#Domain: the URL
#Alexa: some kind ranking, small numbers are better
#Rank: another sort of ranking, big numbers are better
#Domain Alexa Rank Site Name
#------------ ----- ------- ---------
amazon.com 13 1177136 Amazon.com
google.com 1 4533883 Google
youtube.com 3 3637788 YouTube
[Code] ....
I've started and am able to get the correct number of lines, and the alexa number, but I keep getting some errors and am just unsure where to correct my code. This is what it looks like;
Code:
// Lexi Anderson
//CS 156
#include <stdio.h>
int main() {
[Code] .....
and once compiled, I get errors.
View 7 Replies
View Related
Aug 15, 2013
Code to accept the information of 5 students and display the information of first 3 students......
Code:
#include<stdio.h>
main() {
struct stud {
char name[20];
int rollno;
float per;
char grade;
[Code] ....
View 6 Replies
View Related
May 11, 2014
I'm learning to merge files, but I think I'm getting it all wrong.I'm trying to merge two .txt files, and have them alphabetized on the output file. I'm getting a couple of error codes that I'm not sure of.
These are my errors:
Quote
73 no match for 'operator>' in '(&line)->std::basic_string<_CharT, _Traits, _Alloc>::operator[] [with _CharT = char, _Traits = std::char_traits<char>, _Alloc = std::allocator<char>](((unsigned int)k)) > nTemp'
77 cannot convert `std::string' to `char' in assignment
View 2 Replies
View Related
Jun 4, 2013
I have written a C++ program I have multiple of CSV file used as input, which I open one at a time and close it after extracting data to a output file which is the only file.
I run getline(inFile,line);
outFile << line << endl;
I run this code, and only part of it is goes to the output file I got, also have spacing randomly to specific file and inconsistent
But when I slower the code, like system("Pause") in the loop, I can get extract what I want perfectly....
Is my program running to fast, why getline would be skipping part of what things I want?
View 11 Replies
View Related
Feb 14, 2015
Write a C++ program to output information for three students. The information stored in your program contains student’s first name, middle name, last name, and test score. The following shows the information for the three students, where test score is in the int type.
John Jacob Smith 78
Mary Jane Weems 82
Dave Joe Dale 61
Your program should declare three named string constants for the three students. Each constant contains the student’s first name, middle name, and last name. You may use three int variables to hold values for the three test scores. The first name, middle name, and last name of a student are then extracted using the substr() function shown in class. Your program should also compute the average (in floating-point number format) for the three test scores. The average score computed should be printed to the screen with 2 digits displayed after the decimal point.
The following shows the output from the program. Note that all the output is left-justified with 15 character positions reserved for each.
first name middlename lastname testscore average
John Jacob Smith 78 73.67
Mary Jane Weems 82 73.67
Dave Joe Dale 61 73.67
View 1 Replies
View Related
Apr 8, 2015
Have everything working fine as far as input and functions.. I am supposed to output the information as a table. I started to write a void function in order to complete this task. I know how to output the information if i were to have an array for the months, but how to display the months when I am using a switch statement.
#include <iostream>
#include <cstring>
#include <iomanip>
/* author: John Pierce
Description: program reads in averages, then prompts user for current month. The program then
continues to prompt the user for the rain fall amounts for the previous year. */
using namespace std;
void printMonth(int month);
[code].....
View 2 Replies
View Related
Feb 27, 2014
i need my code to stop outputting all the numbers throughout the steps it is going through i just need it to output the total
this is my input
M
C
C
C
L
I
V
and its output is
Your total is 1000
Your total is 1100
Your total is 1200
Your total is 1300
your total is 1350
Your total is 1351
i just need it to output the last number
// write a program to read a string of characters
// that represent a Roman numberal and then convert
// to Arabic form ( an integer
// input from data file
[Code].....
View 1 Replies
View Related
Oct 13, 2013
I am having trouble outputting the file "output1.dat" to the screen. here is my code -
#include <fstream>
#include <iostream>
#include <cstdlib>
#include <string>
using namespace std;
//Outputs a description of what this program does
void intro();
void sort_merge(ifstream& in_1, ifstream& in_2, ofstream& out_1 );
[Code] .....
View 2 Replies
View Related
Apr 2, 2014
I am trying to retrieve information from a website [URL] .... and have written a C code as follows:
Code:
#include <stdlib.h>#include <stdio.h>
#include <string.h>
#include <curl/curl.h>
int main(int argc, char* argv[]) {
/* Exit status to return */
int exitStatus = 0;
[Code] .....
The output of this program should be:
From To
4504111 B0LPF3
4504111 P62993
The first print option [printf("%s", url)] gives the url output as [URL] .... which on being manually pasted in any web-browser gives the correct output but the program fails to give the output.
View 1 Replies
View Related
Feb 6, 2014
I used to use OutputDebugString, and not using it now because it only allows to strings to be outputted, are there any methods that I can dump virtually anything to the console?
cout << thing << endl;
But what if I am not start running the program from the command prompt?
View 2 Replies
View Related
Apr 7, 2013
I am trying to output data from two sorted arrays into one file(which should also be sorted). The program works for most of the data, but after it reaches a certain record begins outputting garbage. I'm sure part of the problem is that I don't know what to include in my while loop that outputs to the file.
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
[Code]....
View 4 Replies
View Related
Oct 22, 2014
I was recently introduced to the fstream header file. I want to know is their a easy way to print an output with append data in a .txt file.
And secondly I am also having an error with my header file. It says error: cannot open source file "fstring" when I hover my mouse over "#Include<fstring>".
View 7 Replies
View Related
Dec 13, 2014
I am trying to work on a C++ program to calculate the quadratic formula using input files and classes. I have written my class, but I am trying to find a way to take an input file with unknown number of lines of coefficients. How do I take each integer from each line and set that value as "a" and "b" and so forth, then start over on the next line?
This is what i have so far.
fstream inputfile;//users input quadratic coefficients file
ofstream outputfile;// outputs a file with solutions
int main(int argc, char *argv[])// argc is argument count, char *argv[] is array of array of characters for arguments {
string dataline;
getline(inputfile, dataline);
[code].....
View 1 Replies
View Related
Jul 22, 2014
How can I take in a path name like "C:myfolderfile.txt" where the user enters exactly that? I've tried putting the arg into a string, then looping through the string to find the '\', but by that time it is too late as c++ considers the '' as a escape character.
Is this even possible? I've googled it and everyone just says to make the user input the path with double \ or with a /.
View 1 Replies
View Related
Apr 5, 2013
I am writing a program to hide files behind other files using Alternate Data Streams in Windows NTFS file systems.
The program is as follows:
Code:
#include <stdio.h>
#include <stdlib.h>
int main(void){
char hostfile[75], hiddenfile[75], hiddenFileName[15] ;
printf("Enter the name(with extension) and path of the file whose behind you want to hide another file: ");
scanf("%75s", hostfile);
[Code]...
The complier is showing error as "Extra Perimeter in call to system" but I am not getting where?
View 4 Replies
View Related
May 9, 2014
Debug Error
ProjectsFinal ProjectGrItemDebugGrItem.exe
R6010 - abort() has been called
I was going over this with a friend and it seems as though getline() is not reading anything in and thus throwing the abort error. I'm not sure why this is because I've included the textfile, with the correct name of course, in both the regular file location and the debug folder. I ask for user input and the user then inputs the name of the file they want, I do some required things behind the scenes and display the results for them in a cmd window. I've included pastebin files for both my header and cpp files because it is far to large for one post I shall, however, post the full code in the comments.
Quick Code
The problem occurs on line 159. I'm assuming once this line is fixed, line 163 will have the same problem.
// Read regular price
getline(nameFile, input, '$');
vectorList[count].regPrice = stof(input.c_str());// Casts string to a float
// Read sale price
getline(nameFile, input, '#');
vectorList[count].salePrice = stof(input.c_str());
Pastebin Links : [URL] ....
View 2 Replies
View Related
Feb 17, 2013
I want to have input data stored in a database. All information entered is to be stored under a single block. That way whenever I want to recover that information all I have to do is point to that block. Think of it like this. I want a large square block that can hold certain information. Inside of that large block are a finite amount of smaller blocks in which the user entered information about a single subject. Lets say block 1 has a name, address, and phone number. The second block will have the same TYPE of information, but different values as entered by the user. I.E:
BLOCK 1: Name 1, Address 1, Phone 1
BLOCK 2: Name 2, Address 2, Phone 2
etc.
The large block contains all of the smaller blocks, we will name the large block "Address Book" ... How would I implement that? Of course it would be just a simple console program that would erase all information when the program shut down, but I've been trying to figure out how to do it, but just can't seem to grasp a good notion of how to do it. What would be the best way to do that? Structures? How would I make it dynamic so that I wouldn't have to define every block, so that it would be added on the fly when someone inputs new information.
View 2 Replies
View Related
Jul 25, 2013
I need a code in c++ . It should count the Files and Directories in root folder with every folder information i need the below information
1) no of files and folder
2) how many files are there in each folder
3) with size of every folder and files it contains
I am new in c++ ....
View 1 Replies
View Related
Jul 10, 2013
I have written the following code to add data to text files which are required to store 3D scan data (I have to calculate the y-coordinate). My code seems to work except that it stops working when I want to create more than ten text files i.e. the directory I am trying to store them in will not hold any more than ten text files. Code is shown below.
#include <string>
#include <locale>
#include <iomanip>
#include <iostream>
#include <fstream>
#include <sstream>
using namespace std;
[Code] ....
View 1 Replies
View Related
May 22, 2013
So I'm trying to output 2 different text files, one has customer names and the other has items they are selling. I gave each customer an ID and each of their items has the same ID. Only problem is when I try to output it, it only outputs the first item with the same ID. I do not want to display the ID number at all, I think getline would show it so I am not using it.
here's my code
ifstream infile, infile2;
string Fname, Lname, email, item, itemPrice;
int id, itemID;
infile.open("Data.txt");
infile2.open("ItemList.txt");
[Code] .....
The first customer shirt item isn't being outputted. Maybe I'm reading the or comparing the info wrong or just not seeing it.
View 2 Replies
View Related
May 2, 2014
Write a program that opens two text files (input1.txt and input2.txt) for input and one for output (output.txt). The program should merge the two input files in the output files. While doing the merge, it will read one line from input1.txt and one line from input2.txt and write those in the output file one after other. Then it will read the next line from input1.txt and next line from input2.txt and write them one after other in the output file.
This is my code:
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
int main() {
ofstream myproject;
myproject.open("input1.txt");
[Code] .....
I need to:
1. how to get the second line in the input1.txt file and so on.
2. After the writing in output.txt, count the number of lines in output.txt.
3. write the number of times term ‘line’ appears in output.txt file.
View 3 Replies
View Related
Nov 20, 2013
I'm trying to output only a few files, using regex, from the current directory, this is my main code:
Code:
// main.cpp
{
char * _dir = new char[MAX_PATH];
getcwd(_dir, MAX_PATH);
unique_ptr<CExtractor> _ptr(new CExtractor(_dir));
delete[] _dir;
}
Code:
// CExtractor.cpp
DIR *pdir = NULL;
struct dirent *pent = NULL;
pdir = opendir(_cwd.c_str());
while ((pent = readdir(pdir)) && (pent->d_type != DT_DIR)) {
if (regex_match(pent->d_name, regex(".(in|txt)$"), std::regex_constants::icase)) {
cout << pent->d_name << endl;
}
}
closedir(pdir);
My code is compiled correctly, but when I run my binary, nothings is outputed..here are my files in the current directpory:
aclocal.m4 config.guess config.status depcomp m4 NEWS
AUTHORS config.h config.sub INSTALL Makefile README
autom4te.cache config.h.in configure install-sh Makefile.am src
ChangeLog config.h.in~ configure.ac libtool Makefile.in stamp-h1
compile config.log COPYING ltmain.sh missing
I have a few "in" files
View 1 Replies
View Related
