Using CodeBlocks. I've added the path to the library files in 'search directories' in 'linker' tab.
E:DataCompLibrarySDL2-2.0.3libx86
I also added the include files location in 'search directories' and that works fine.
But still when I add 'SDL2.lib' in linker settings and try to compile I get: cannot find -lSDL2.lib
For each project in a VS solution it's possible to stipulate per-project folders that get searched in addition to the folders that you've set globally for Visual Studio.
Which folders take priority? Do the project's folders get searched first? Or do the global folder get searched first? Or is it possible to select one set as having priority over the other?
(this is VS 2005 BTW)
I have these two files:
/project/protocol/guarddog/report.h
/project/protocol/sky/report.h
I have two report.h files located in two different directories. However the contents of them are different. How can I include the report.h file located in guarddog into the report.h file located in sky?
I assume just doing this would be ambiguous:
#include "report.h"
The code below is suppose to create directories and upload files, but it is not working. What can I do to make the code work?
Code:
void CRECURSIONDlg::Recursion(CString sPath) {
hInternet = InternetOpen(TEXT("BEAR FTP"),
INTERNET_OPEN_TYPE_DIRECT, NULL, NULL, 0);
// Make sure there are no errors
hIConnect = InternetConnect(hInternet,"192.168.1.4", 211,
"******", "*****", INTERNET_SERVICE_FTP, INTERNET_FLAG_PASSIVE, 0);
[Code] ....
I need a code in c++ . It should count the Files and Directories in root folder with every folder information i need the below information
1) no of files and folder
2) how many files are there in each folder
3) with size of every folder and files it contains
I am new in c++ ....
basically I need to list all of files and subfolders and files inside them etc till all paths has been inspected, read data from every single object and pack it all into a single file.
I did not want to use boost or minizip because it seems too much for something so easy so I just wrote it myself via dirent - everything works fine I just have problem with directories and files with non ANSI character in titles (I'm from Poland) like ąęoźż etc. I can open them without problem and read all data from them but when I pack their's filename to std::string - it gets corrupted and happend to be for example:
TEST~1 instead of TESTąę
Just a note that data inside files is being written without problems - all special characters are stored without problems.
Code:
#include <list>
#include <string>
#include <dirent.h>
#include <cstdio>
#include <windows.h>
typedef struct {
std::string path;
unsigned lenght_of_path;
[code].....
I have already tried using std::wstring and Wide Characters function from dirent.h but I have failed.
I want to include turboc.h file for some project
where do i have to add this file for mac xcode?
I wrote this code but it opens file in its folder Iwant to save in somewhere else. How I could assign path for the files in for loop?
for (double j = 0.5; j < 1.4; j+=0.1) {
s +=1;
stringstream a;
a << j;
filename = "Vzcr_" + a.str();
filename += ".txt";
files.open(filename.c_str(), ios::out);
I search for a really simple window library with a OpenGL context. I really only want to create window, I don't want a GUI library like wxWidgets. The best would be, if the library is cross platform compatible. In Google I only find very big libraries with widgets and other stuff.
View 4 Replies View RelatedI am writing a little OS agnostic library for my team for manipulating files.
One such function is used to move/rename files (only files, not dirs). I got into a little argument with a colleague about naming: "rename" or "move"?
"move" makes more sense, but the c api calls it rename.
Is there any historic (or actual) difference between a "rename" and a "move" we could base ourselves on? Or is this purely an Apples vs Oranges?
I want to search a special folder (and SubFolders) for Sh files (*.sh) then copy them (if found) to specified directory in Dev-C++ ,so that i need two function:
1-Search in specified directory for special FileType (*.sh)
2-Copy given file to specified directory .
In linux/bash Scripting you can do this easily but i should do this in Dev-C++
I'm stuck on unix system programming and am beginner about it. Assume that there is a directory which X. There are a file(text1.txt) and another directory which is Y in X. Last, there are two files(text2.noExtension) and text3.noExtension) and another directory which is Z in Y. My goal is that read files and enter directories until there is no directory. How to go on. Example:
Code:
#include <stdio.h>
#include <dirent.h>
int main (int c, char *v[]) {
struct dirent *pDirent;
DIR *pDir;
if (c < 2) {
printf ("Usage: testprog <dirname>");
return 1;
[Code]...
So first, I'm sending files from a server to a client. Basically, the server says "Incoming file" and tells the client "The name of the file is: ". So taking the name, I need to create folders, if they don't exist, for the received file to be placed in (since std::ofstream doesn't allow creating directories).
My current code below is working. My trouble is listed below the code.
std::stringstream ss (name);
//name is the recv'd name
std::string token;
[Code].....
[URL] ....
I've been getting these errors on two computers through four different compilers. It seems the directories arnt set up. If that's the cause, I have no clue how to resolve that.
Its a very simple prog too; it just calculates a dist, using dist formula.
#include <cstdlib>
#include <iostream>
#include <math.h>
using namespace std;
void calcDistance (int x1, int y1, int x2, int y2);
[Code] ....
I have a program where I want to export the .lib file in a "Lib" folder, and the .dll file in the "bin" folder. How can I choose where the lib file and .dll file go?
View 3 Replies View RelatedI'm using the code found on the site here:
//* remove example: remove myfile.txt */
#include <stdio.h>
int main () {
if( remove( "myfile.txt" ) != 0 )
perror( "Error deleting file" );
[Code] ....
I replaced the myfile.txt with the directory of the file I want deleted.
"C:SOUNDSsavegame.dat"
It returns: Error deleting file. No such file or directory exists.
I've triple checked the directory. Its correct. I must be using this incorrectly. How?
I am currently working on a program that will take an image and compare it with all other images in the current directory and sub-directories. I decided to use Qt for this as Qt has a QImage class with an overloaded == operator. This seems to work well if there are duplicates of the same size.
However, my goal is to not only find duplicate images of the same size, but the same image which may be a different size. To do this, I shrink the larger image to the size of the smaller image using the QImage scaled function.
The concern I have with this is that the scaling isn't done the same way the smaller image may have been scaled. I tested this by shrinking a copy of a picture in Paint, that image does not get deleted. I believe that == is looking for an identical image, so when I do the shrinking (via that scaled function), even if it is of the same picture I shrunk in Paint, the two methods of shrinking are not identical, and so the images appear different.
Any better method I can try? Something that can allow for slight deviations, such as an image being 99% "the same" as another. (I admit here that I will need to define some metric for what "the same" means.) In this case, the method assumes they are "identical" and gets rid of one of them.
The main way I can think of doing this is to go through each image, one pixel at a time. If the two pixels from the different images at the same index are the same, then I can increment a same pixel counter. If this number is 99% (or some other threshold) of the total pixel count, I can make the assumption the images are the same.
I've been reading about libraries; How to make them, how to use them, the different types of libraries, etc..
When using a shared library, does the program require that library to be installed on the computer after the program has been compiled into an .exe?
Ie.. if somebody downloaded a "Helloworld.exe" that I had compiled on my computer using a shared library (that wasn't part of a standard operating system), would they also need that shared library on their computer for the program to run without errors?
and for Static Libraries, when I compile a program using a static library, does it include in the final binary only the functions of the library that are actually used, or does the compiler add in the entire library?
I am trying to implement a Task scheduler where i have n number of tasks. The Idea behind my task scheduler is that in a loop of queues of a vector, task should get enqueued to the shortest queue among the loop of queues, which is done by the following code.
#include <vector>
#include <queue>
std::vector<std::queue<int> > q
int min_index = 0;
task t // implemented in the other part of the program
[Code] ....
Next i am trying to extend this paradigm to reduce the overhead time of the scheduler, Instead of searching the shortest queue every time, search after some condition ie. search the shortest queue after 5 tasks gets enqueued to the shortest queue.
i need to do something like this
#include <vector>
#include <queue>
std::vector<std::queue<int> > q
task t // implemented in the other part of the program
while(q[min_index].size()!=q[min_index].size()+5) // check whether current min_index queue's size is increased 5 more times if not goto enqueue
[code].....
Write a program to find the number of comparisons using the binary search and sequential search algorithms
//main.cpp
#include <cstdlib>
#include <iostream>
#include "orderedArrayListType.h"
using namespace std;
int main() {
cout << "." << endl;
[code]....
inputting a search array. I tried putting a binary search but I can't get it to work. everything else works up until I put the value I am searching for in the array, then it just crashes.
How it suppose to work: input 2 coordinates with a value each then it calculates the distance between them then it suppose to let user search the coordinates for a value and state if found which coordinate it is at.
#include "stdafx.h"
#include <iostream>
#include <iomanip> //for setprecision
#include <math.h>
[Code].....
I am writing a program to hide files behind other files using Alternate Data Streams in Windows NTFS file systems.
The program is as follows:
Code:
#include <stdio.h>
#include <stdlib.h>
int main(void){
char hostfile[75], hiddenfile[75], hiddenFileName[15] ;
printf("Enter the name(with extension) and path of the file whose behind you want to hide another file: ");
scanf("%75s", hostfile);
[Code]...
The complier is showing error as "Extra Perimeter in call to system" but I am not getting where?
I am writing a piece of code that requires me to display the last 1000 lines from a multiple text files (log files). FYI, I am running on Linux and using g++.
I have a log file from which - if it contains more than 1000 lines, I need to display the last 1000 lines. However, the log file could get rotated. So, in case where the current log file contains less than 1000 lines, I have to go to older log file and display the remaining. For e.g., if log got rotated and new log file contains 20 lines, I have to display the 980 lines from old log file + 20 from current log files.
What is the best way to do this? Even an outline algorithm will work.
I got a little question about getting the data path of my c program. I heard something like it's already given in the "int main(int argc, char **argv)". But with witch function can I get it?
For example: The program is called Pathfinder and the path is 'D:Path1Path2Pathfinder.exe'.
I have a string like this
const char *filename = "C:/Qt/progetti/worlds/fasr.world";
then I have a string like this
char *pathdir = "C:/Qt/progetti/worlds";
I would get this string: "worlds/fasr.world" how should I do ?
I wanted to make my program read the file "input.txt". I did it successfully, but now I want to get the full path of the file "input.txt". Is there any way to do it?
My output should be :
FILE *file;
std::string fullFileName;
file = fopen("input.txt", "rb");
if(file != NULL)
{
// getfullfilename(file, fullFileName);
// std::cout << fullFileName.c_str() << std::endl;
}