I'm trying to pass these numbers into the array using the for loop: 1, 2, 3, 4, 5. I created two files in my project called "inStuff.txt" and "OUTPUTS.txt". I know I have an error at my input in the for loop, which is a bit similar to my problem or something? I'm also on linux using a crossGCC complier(not sure if that makes a difference).
#include <iostream>
#include <fstream>
using namespace std;
[Code]....
so i got this piece of code today having some slight errors with it, how its actually done as i want to know where i have gone wrong here is the code .. Using a for loop to input and output array values
*/
#include <stdio.h>
int main(void) {
/* Declare an array of integers */
int Grades[5];
int nCount;
/* Populate the array */
for(nCount = 0; nCount < 5; nCount++)
[Code]...
I have this code that im stuck on what i need to do is Extend the code such that when it starts the user is asked to input values to specify each of the three ranges before moving on to accept and tally the main values how do i do that Using a for loop to input and output array values Also calculate the average
*/
#include <stdio.h>
int main(void)
{
/* Declare an array of integers */
int Grades[5];
int nCount;
int nTotal = 0; /* Declare and initialise the value */
float fAverage;
[Code]...
I'm trying to passing values from a text file to an array. The values in txt file is;
0 2 3 5
1 2 5
0 1 3 6
1 3 5
I need to store these values in an array like that
Code:
int array[?][?]={{0,2,3,5},{1,2,5},{0,1,3,6},{1,3,5}};
I'm trying to pass several integers into the array idAr[10] from an input file using a for loop and then having them output on the console. The output should look like this:
#include <iostream>
#include <fstream>
using namespace std;
[Code].....
I wanted to print the values of a array from a function by passing the array as well as the number of elements to be read. For a single dimensional array, this is how i have written it. It's pretty straight forward. I want to read 5 elements from the 5th element in the array.
Code:
#include<stdio.h>
void display(int array[],int size) {
int i;
[Code]....
With this code I want to print the five elements from the element present in [0][4].
But shows an error that
Code:
D:BennetCodeblocks CLearning CSingleDimentionalArray.c||In function 'main':|
D:BennetCodeblocks CLearning CSingleDimentionalArray.c|18|warning: passing argument 1 of 'display' from incompatible pointer type [enabled by default]|
D:BennetCodeblocks CLearning CSingleDimentionalArray.c|2|note: expected 'int (*)[10]' but argument is of type 'int *'|
||=== Build finished: 0 error(s), 1 warning(s) (0 minute(s), 0 second(s)) ===|
I know when you pass a array as an argument it gets decomposed into a pointer, but with a multi-dimensional array this is not the case. how this works for mult- dimensional array's?
This read a file (arrival time , brust time) for n processes and suppose to do shortest job first scheduling. the file read correctly but passing the value to SJF function gives read of 0's to all values .
#include<stdio.h>
#include<stdlib.h>
typedef struct {
int brust_time[10];
int arrival_time[10];
}Time;
[Code] .....
The first problem i'm having is in the following code.
Code: #include<stdio.h>
#include<stdlib.h>
#include<time.h>
// program ask for max value and always returns random numbers < max
[Code].....
The ultimate goal of these two programs is to merge them and make one program that takes a max value from the user and fills up an array of (10^6) elements with values ranging from (0 to maxValue).
I'm working on a homework assignment that asks me to roll two die a user given number of times, find the roll sums, and a few other things. I'm working on it one module at a time and I'm running into two big problems so far.
The first problem is that my int variable rolls changes to a number within the random number generator range of numbers after I run rolldie. I got around this by making a const equal to the user entered value of rolls just so that I could continue developing the program.
My second problem is that the values of the arrays resultsOne[] and resultsTwo[] are changed after running findsum(). Why this is happening and I even tried passing them as const, but that changed nothing. We just started learning about passing arrays to functions, so there might be something big that I'm missing.
Code:
#include <iostream>
#include <cstdlib>
using namespace std;
void rolldie(int resultsOne[], int sizeOfresultsOne, int resultsTwo[], int sizeOfresultsTwo);
void findsum(int resultsOne[], int sizeOfresultsOne, int resultsTwo[], int sizeOfresultsTwo, int tossSums[], int sizeOftossSums);
[Code] ....
I am trying to read the file which has the values stored in the following pattern
2 4 10 103 2 504 .... and so on
I Have opened the file and then passed the opened file to another function to process it further.
here is my code
#include <iostream>
#include <fstream>
#include <vector>
#include <stdlib.h>
[Code].....
now the problem is when the control exits the "while loop" in the function "readingValues(std::ifstream& myFile)it goes straight to catch block ?
I am grabbing data from three entities and want to grab a field value in each of the entites and place it in an arraylist. What I would like to do is loop through the arraylist for all the values and do something for each value only once. If the value in the array list is repeated, I want to not do anything for it and continue till the end. Basically, I loop through all the values do something for each value and skip over the repeated value if I already did something.
View 1 Replies View RelatedWhat "int values" is supposed to mean as parameters to these functions? I'm not sure what do with them. Also how to input values into the array via functions. I was trying to but I just don't understand how to connect a user's input to a function to then enter into an array.
// input reads “values” integers from the user to place in the array data. It prompts the user for each value individually with the ordinal position of the value.
void input (int data [size], int values);
// Places the sum of corresponding values from arrays a and b and places the results in array s. The first “values” integers in the array are processed.
void do_sums (int a [size], int b [size], int s [size], int values);
[Code]...
I have developed the following code for a PIC18 micro-controller. The object of the program is to compare a input value (presumably from a magnetic swipe card), represented here as scan_id, to a list of valid access ID's represented by the array valid_id. If there is a match the program will drive an output pin high to light a green LED for 20 seconds. If there is not a match the program will drive an output pin high to light a red led for 20 seconds.
The issue that I am having is that when the program is executed, the "else" case for the red LED is always selected regardless of the value for scan_id. If I change the "if" statement from == to = then the case for the green LED is always selected regardless of the value for scan_id.
#include <p18f452.h>
#include <stdlib.h>
#include <stdio.h>
#include <delays.h>
void main () {
TRISA=0xFF; /* Configure PORTA<7:0> pins as inputs */
TRISB=0x00; /*Configure PORTD<7:0> pins as outputs */
[Code] ....
this is my function for allocating memory in 2D array
Code:
#include <stdio.h>
#include <stdlib.h>
int allocate_array(int **array, int *row, int *column){
int i;
}
[code]....
end of allocate_array function and this is my function for asking for the values to be stored in array
Code:
int input_array(int **array, int row, int column){
int i, j;
//ask for the values to be stored in the 2D array
for( i = 0; i < row; i++ ){
for( j = 0; j < column; j++ ){
}
[code]....
why I'm having error here in my input_array() function
Code: scanf("%d", &array[i][j]);
The question is "Write a program that uses a while loop to read a set of integers from an input file called "data.txt" and prints the total number of even numbers read from the file."
Code below is the program I have created so far. I keep getting the window to pop up but not stay up so I am assuming I am doing something wrong.
#include <iostream>
#include <fstream>
using namespace std;
int main() {
std::fstream input("data.txt");
if (!input.is_open()) {
std::cout << "There was an error opening data.txt";
[Code]...
all i want to do is to read a fixed char array sized 4 from user and pass it to Binary File then Print Encrypted content from the the File to the console screen .. but it seems it prints the same input every time .. and i tried everything .. it works fine with integers and strings .. but when it come to char array nothing ..
#include <iostream>
#include <fstream>
#include <cstring>
using namespace std;
[Code].....
I am trying to create a simple interface on console to allow to input some values to some variables. For ex:
int main() {
double a = 1.5;
double b = 2.5;
double c = 3.5;
string x;
[Code] ....
However, I want these three to display at the same time (now they display one by one), and in the console window I can move the cursor between input place of a, b and c with "arrow key" of keyboard.
The program asks for to ask the user for how many students there are, and how many strawberries they picked. The farm gets to keep half and the students get to keep the rest.
I am using functions and passing values to one function to another. I know I am making it harder then I need to, but I want to work with functions more and passing values. I figured it was better to practice with simple programs.
Code: #include <stdio.h>
float people(float);
float strawberries(float x);
[Code].....
I am trying to get some confirmation about how to pass to functions. If you want to assign default values to certain parameters, and have others defined inside the body of int main(), then the parameters which will have default values go at the end of the list. Is that correct?
i.e. The following code is wrong, because we cannot leave a black in the function call on the third line of the main function. However, if we switch the prototype to void Passing (int a, int c, int b = 1); and the function definition to void Passing (int a , int c, int b) everything will be okay and we can call the function as Passing (a, c).
In brief, we cannot do this EVER:
Passing( a, , c)right?
#include <iostream>
using namespace std;
[Code]......
So form two needs to pass information that was typed in its text box to form 3. So then form 3 can use this information. I think I am creating a new instance of form 2 because I get the exception can not divide by 0 so it is empty even if I typed in a integer in the text boxes. How to pass information from the textbox to a var that can be used in another form.
public partial class MapProperties : Form {
private int _numRows;
public int NumRows {
get { return _numRows; }
[Code] ....
I'm working through the Let us C book. One exercise asks me to collect int and float , then pass them to a function that gets product of these and returns it to main. My code looks like this:
Code:
#include <stdio.h>#include <stdlib.h>
main()
{
int a;
float b, c;
[Code]...
So while compiling i get an error about conflicting types for product. I tried to google that error but couldn't understand what's the problem. My only clue is that i can't pass int and float to a function at the same time... Could that be it?
I am currently writing a program which needs an edit form. This form is to edit a country in the datagridview which I have. I am however confused about how to pass the data from the data gridview in the main form to the relative places on the edit form. I have done most of the coding as shown below. I know I need a method in my AVL class to return all the information of the selected country back to the main form method which then passes it back to the edit form and displays it. I am unsure what to pass and what to write in this method.
Main form method
public void button2_Click(object sender, EventArgs e)
{
// creates new form referencing data grid view and AVL Tree
EditCountryForm editform = new EditCountryForm(ref this.countryTree, dataGridView1);
string CountryName = "";
//set name of country selected to string
[Code]...
I have an ms access database with 2 tables in it which I named Customers and Products. I am using visual studio 2010, in my windows form I have 4 textboxes and 3 button in it, for my 1st textbox when I entered one of my ProductCode such as 10111, then press the Display button, the other remaining 3 textboxes should populate and display the following;
ProductID: CH001
ProductName: Chocolate Strawberry
ProductCode: 10111
Then the 2 remaining button named NEXT and PREVIOUS, should be able to display all my product name with 10111 product code.
My problem is that I need to take a csv or excel file with tens of thousands of datapoints, write all points in a section of column to an array, perform calculations on them, and then write it back into another column.
I've been looking all over the internet for ways to do this easily. So far I have not found anything that I can follow and implement.Some codes have been slightly useful, but they aren't commented in a way I can understand. How to write code to take, for instance, lines from column b between 500-1000, write them to an array, and write another array 500 characters in column c. If that code could be commented, I have tried a few different techniques (counting commas), but haven't gotten anything to work.
I'm trying to read values from a file to store them in an array in C++ and then output the values in a table format for everyday of the month: morning, noon, evening and night. My text file looks something like this:
38
210
14
3
214
222
82
176
225
.
.
#include <iostream>
#include <string>
#include <cctype>
#include <fstream>
#include <sstream>
using namespace std;
struct dailyReadings{
[Code] ....
Goal: Write a program that compares the values stored in the first array to the user inputted values in the second array.
In order to fix this error: [URL]...
I had to change my array initialization to one with a star in front of it:
char a1[]={"a","d","b","b","c","b","a","b","c","d","a","c","d","b","d","c","c","a","d","b"};
to:
char *a1[]={"a","d","b","b","c","b","a","b","c","d","a","c","d","b","d","c","c","a","d","b"};
I also changed my 2nd array to one with a star in front of it: char *a2[20];
What does this mean exactly? Putting a star in front of an array?
Also, I am now getting an "unhandled exception" when I try to get input for my 2nd array:
cin>>a2[i];