I am trying to get text file and read only first 100 lines of the text content using c/c++. how can i do it?
is it something like string line;
getline(stream,line);
??
I'm trying to read all content from a text file into a string. This is the code I'm using for it (I know there are other, maybe better ways to do it but I'd like to stick to this for now):
char* buffer;
std::string data;
FILE* fp = fopen("textfile.txt", "rb");
if (!fp) {
printf("Can't open file");
[Code] ....
So my problem is that I get an exception when I try to free the memory -> 0xC0000005: Access violation reading location 0x51366199
I even get the exception when I try to free it immediately after calloc() but why this is.
And if I use buffer = (char*)malloc(lSize); I don't get any exceptions.
So, why this fails and what I'm doing wrong.
The Objective Of This Program Is To Create A File To Write Text And Read Back The File Content. To Do That I Have Made Two Function writeFile() To Write And readFile() To Read.The readFile() function works just fine but writeFile() doesn't.
How writeFile() function Works? when writeFile() function Execute It Takes Characters User Type And When Hit Enter(ASC|| 10) It Ask "More?(Y/N)" That Means What User Want? Want To Go Next Line Or End Input?
If "Y" Than Inputs Are Taken From Next Line Else Input Ends.
But The Problem Is When Program Encounters ch==10 It Shows "More?(Y/N)" And Takes Input In cmd variable.If cmd=='Y' I Mean More From Next Line Than It Should Execute Scanf Again To Take ch I Mean User Input.But Its Not!!! Its Always Showing "More?(Y/N)" Again And Again Like A Loop.
Code:
#include <stdio.h>
void writeFile(void);
void readFile(void);
int main(){
[Code].....
private void open(object sender, EventArgs e) {
OpenFileDialog openDialog = new OpenFileDialog();
if (openDialog.ShowDialog() == DialogResult.OK) {
string[] lines = File.ReadAllLines(openDialog.FileName);
int k = 0;
while (k < lines.Length)
[Code] ....
So in this code, the user basically opens a text file from the dialog. Then the file gets read on all the lines and gets stored in an array. Now the reason I did this is because there are more fields of text boxes I have to fill in after I fill in the table (6x3). I'm getting an out of bounds error however.
19
19
19
0
95
0
0
0
0
5
0
0
5
1
0
0
51
1
110
Warrior
This is a sample text file that is being used. As you can see all the lines from start up until (excluding "110") will be used in the table. Now I want to read the last lines in this text file and put it in another text box. How do I do that?
Code software that, from an original text file, generate another file with the text content in upper case.For exemple:
entrence:
luke
tom
alex
outings:
LUKE
TOM
ALEX
My code so far:
Code:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
}
[code]....
I have a .txt file that contains, together with a few characters, columns of values that I want to save in different files like is written in the program (file 1, file2, file3 - a with x, b with y, c with z). The pattern of the source text file is like this:
known_vector frame1 151 65 0 frame2 151.000763 64.538582 0.563737
known_vector frame1 152 65 0 frame2 152.000702 64.542488 0.560822
known_vector frame1 153 65 0 frame2 153.000671 64.546150 0.558089
Until now I could manage to split the files, but the output gives me only zeros. First the program count the number of lines of the read text file, then it should display the desired columns of double values in three other .txt files.I've got for the three .txt files columns like this:
0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
I have a text file called (Test.txt) with the following text:
This is line one
This is line two
This is line three
How do I go about writing a program that will print a line of text (e.g. "This in line two" on the console screen?
All I can seem to do is display the entire text file.
This code works, but not fully This code reads com ports, when a string is available, I check to see if it contains some keywords defined in array If it does, i print out the string itself.
The problem i am having is that it seems to stop processing the data at some point but I do know that there are more strings to be read. So, it does keep reading more lines of data
using System;
using System.Text;
using System.Collections.Generic;
[Code]......
I'm trying to make a program where it reads a text file which contains "blocks" of questions like:
Type: multiple_choice
Question
Num_options: number of options
a) option1
b) option2
c) option3
d) option4
Letter of answer
and
Type: short_answer
Question
Answer text
what I'm trying to do is use parse those blocks and have it get handled by the classes, MultipleChoice and ShortAnswer.
I'm planning on using getline as a virtual function and have an if statement like
"if (string == "multiple choice)
** then get it handled by the MultipleChoice class "
A user enters a query and other users reply to it. But it creates a problem here. After adding queries, if I wish to reply to query in between then it adds a redundant entry in file. 1st entry is the original query without reply and 2nd entry is the same query now with a reply added. I want only 1 entry of the query along with replies.Here is the code:
Code:
#include<stdio.h>
#include<stdlib.h>
#include<conio.h>
#include "var.c"
int check_count();
void add_query();
void add_reply();
}
[code]....
Can i edit records stored in file without rewriting whole file again .?
View 1 Replies View RelatedI am trying to read lines from a .txt file like this:
// "file.txt"
This is the first line.
This is the second line.
To do this, I tried using the following code:
int main() {
std::ifstream data;
data.open("file.txt");
[Code] ....
The output I want is:
This is the first line.
This is the second line.
However, all I am getting is:
This is the first line.
I can't quite see why this isn't working. I am decently familiar with file streams in C++, so I thought I would know what I was doing, but apparently not.
I am working on a program that deletes same lines in a text file. I already wrote it, but it still doesn't work.
Code:
#include <stdio.h>
main(){
FILE *f1,*f2;
char oneword[100],filename[25];
int c;
long int i,j;
char *norstring[500000]; /* I count from 1 */
[Code] ....
I have a text file with repeated lines, and i would like to get rid of the duplicate information, an algorithm to achieve this?
Example of my text file (the actual file may be huge, up to 500MB):
+Hello
+Bye
*The sun
-The moon
+Bye
/One coin
+Bye
+Bye
+Hello
*The sun
And i would expect to get something like this:
+Hello
+Bye
*The sun
-The moon
/One coin
I know how to open and read a file with fstream and getline(), but i don't know how to make the comparison.
lets say this is our textfile
-----------------------------------
45(here is space)string and other shit is here
454(here is space)string and other shit is here
4121(here is space)string and other shit is here
77(here is space)string and other shit is here
45545(here is space)string and other shit is here
1122(here is space)string and other shit is here
-----------------------------------
how do i get exactly that number in every line start? and compare but i jus tneed to get them to variable so ?
how to read random lines from a text file using "C", without repeating same lines.
View 10 Replies View RelatedI made a program which read a text file and copies text in an another text file if line doesn't contain a specific string(code is below), how can I make it after it finds out a line which contains this string to skip n lines ? I tried to use a for loop but without any luck..
Here is what I did until now :
rfile.open("test.txt");
wfile.open("out.txt");
while(std::getline(rfile,line)){
n=line.find(name);
if(n == std::string::npos){
wfile<<line<<std::endl;
}
//Here is the "problem"
I'm creating a program to read information about class schedules at my school, reformat the information, and allow the user to search for specific semesters. There are eight fields of information. I'm reading the info from a text file using eight parallel arrays, but I'm having trouble declaring the arrays. I can run this code in one compiler (Dev-C++) with no problems, but I get errors when trying to compile it using Visual Studio stating that arrays must be declared with a constant value. I have a loop to run through the text file, with a counter to increment with each subsequent line, then I create a constant int equal to the counter, and declare the arrays of size equal to the constant int. Here's the section of code in question:
// Counting the number of lines in the text file
inFileForLines.open("CIS225HW1DA.txt");
string countLine;
int numberOfLines = 0;
//Discarding the first line of the text file containing only column headings
getline(inFileForLines, countLine);
[Code] .....
I am trying to print a specific line from a textfile
e.g
I have a text file called info.txt and inside it contains the id,item name, price, quantity
Code:
1,shirt,100,10
2,pants,50,9
3,pen,20,8
I know how to find a specific word at the line in the file but how do I find and print out the specific line e.g(print out just the entire contents of line 2)?
Code:
string temDescription;
ofstream fout;
int curLine = 0;
[Code].....
C program to count the number of lines in a text file and reverse the contents in the file to write in an output file.
ex :
input
one
two
three
output:
three
two
one
I have a SDI application that uses a CFormView class to create a window and this window has 2 buttons and 2 edit boxes.
I can resize this window, like minimize and maximize, but the controls all stay at the same place.
I know that it's possible to move the controls based on window size.
But what i want to do is, as the window is expanded the controls and it's text content to grow proportionally and same when the window is shrinked.
Is that possible to do? i.e., increase/decrease size of controls and texts per window size.
My text file is in the correct folder and the name of my text file is the same as the code. I dont get no errors i dont see why i cant get my text to be read.
my code.
#include "stdafx.h"
#include <iostream>
#include <string>
#include <fstream>
using namespace std;
void main();
int menu();
double currentBalance(double balance);
[Code] ....
I was wondering if there is a -> simple <- way to overwrite existing text in a masked texbox...
Example: I have a masked textbox, where you can insert dates. That means that you can enter only numbers for the day, month and year.
If I have to do it programmatically, there is no problem... I already have some ideas how I could do something like that, but I would like to know if VS has any parameter or any option I only have to activate.
I'm a beginner at programming and I'm not sure how to read in information from a text file. What I want to do is take a text file which contains around 20 rows and 3 columns of numbers, and put these into an array which can then be used for performing calculations. How do I do this? Would I need to declare the size of the array beforehand? When accessing my file, do I include the full address?
The relevant part is lines 29-33:
Code:
#include <stdio.h>
#include <stdlib.h>
#include <math.h>
/* this is a simpllified code using BEM equations */
main()
[Code] ....
how to read and display the content of a text file in my console application using C++. The file contains 25 lines and 3 columns. The first column is "Rank" (numerical values from 1 to 25) the second column is "Name" (25 teams name) and the third column "value" has the amount of point each team is worth. Looking for code for reading and displaying all this information ....
View 4 Replies View RelatedI am making a script to read the latest from a text file. It picks up the line by numbytes in fseek, but the data line may vary and numbytes not be accurate, how can I fix this?
And another problem is that the line has, date, time, value, separated by space, how to read that line and put these 3 information in variable?
#include <stdio.h>
#include <conio.h>
int main() {
FILE *arq;
char Line[100];
char *result;
int tam, i;
// Opens a file for READING TEXT
arq = fopen("temp.txt", "rt");
[code].....
